Develop Bugs

Galaxy Nexus stuck on Google logo boot loop help [GSM]

I am running the stock rom without root and unlock and I got the 4.0.2 OTA update 3 days ago. Today when I do the pattern unlock my phone froze and reboot. Now I cannot get pass the Google logo boot screen.
I am able to get into the recovery mode but I don't want to do a factory restore as I don't have anything backup yet.
Is there any solution to this boot loop problem? I am surprise that I am getting this problem as I am running the stock rom without any root / mod.
If there is no solution to this, is there any way I can backup my phone before doing the factory restore?
Many thanks!

You can back up via adb. Try searching in the General threads, since there's a long topic on this...
Good luck!

Thanks, I do find information about backup, but I can't find anything regarding the bootloop...

When i got stuck at the Google screen with a bootloop i booted into the bootloader/fastboot screen with vol up+down power and i redid the one click all process and it basically rewiped my device and put it back to working again with unlocked bootloader rooted etc....
All you have to remember is what build number you have and let the toolkit work its magic.

tigersgt said:
Thanks, I do find information about backup, but I can't find anything regarding the bootloop...
Click to expand...
Click to collapse
Sorry, forgot to mention. You're probably gonna have to wipe via recovery - which is why I pointed you to a back up...

danger-rat said:
Sorry, forgot to mention. You're probably gonna have to wipe via recovery - which is why I pointed you to a back up...
Click to expand...
Click to collapse
I can't find a way to backup without going into Android. I can only go to Fastboot Mode.
Anyone know how to backup the file using abd without getting into android?

Why did make 2 threads about this. Unlock the boot loader and use adb to flash your stock. Image files. You will loose all data unfortunately but I think that's the only way to fix it.
Sent from my Galaxy Nexus using xda premium

Ok I'm stuck with the same problem now. I wanted to flash a ROM, so I downloaded AOKP, flashed it and rebooted and the phone refuses to boot past the Google logo and keeps rebooting again and again. I am able to get into the recovery. I have flashed the ROM several times and its still the same. I have done a complete wipe as well. Still no go.
Fastboot command doesnt work in the bootloader either. I have made sure the drivers are installed, still there is nothing when I type fastboot devices. If I type any fastboot command it just says <waiting for device> or something like that.
Any other suggestions? :-s

[Q] Help! - Rooted Zenfone 2 (ZE551ML) bricked after OTA accidently

followed a tutorial (Cnncted's youtube clip - How to root the ASUS ZenFone 2 ) to root
Accidentally (very stupid) pressed the update option when an OTA update showed up yesterday (Jul 8 2015), and after that the phone won't start properly - stopped at in search of incredible...
No luck with trying to boot into recovery mode (power + volume up). It just vibrates once and the screen is black. Trying to flash recovery image with ADB and flashtool etc, but the MTP usb connection failed. If I connect it to the PC using the USB cable and then press the power button to turn it on (stuck in that ..."incredible" screen), device manager shows the Z200AD name with a yellow exclamation mark beside, and Asus ZenUI software will automatically start. But it's not really recognized by the PC.
So...if you have any suggestions for me to try, please let me know and that would be greatly appreciated!
Harry
p.s. This is a US version, so the it's the WW sku?

Same problem here. I have a rooted 551ML and on July 6th I received an OTA update. I installed it and I'm stuck in boot loop. I have hundreds of family pictures in the internal memory.
The good news is that I have access to boot loader and recovery.
I could not find any custom recovery for Zenfone 2. They are not out yet, right? Is there any way to copy the internal memory of the phone (that doesnt load the OS) to the SD card? Or to paste a file img.boot taken from a downloaded official rom and copy it over the corrupted one on the phone's memory?

If you can access the bootloader, you can do this:
http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835
Btw, there is a custom recovery out there (TWRP, check the Development section), but you will need an unlocked bootloader to use it in your state (I think).
US version is the WW SKU btw. Hope this helps.

joel.maxuel said:
If you can access the bootloader, you can do this:
http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835
Btw, there is a custom recovery out there (TWRP, check the Development section), but you will need an unlocked bootloader to use it in your state (I think).
US version is the WW SKU btw. Hope this helps.
Click to expand...
Click to collapse
Joel, thanks a lot! I will give it a try.
fingers and toes crossed...

I faced this problem too. All I did was to flash the boot.img of my version using fastboot,
Then I flashed the firmware, without factory reset I started the phone.
I was continiously getting an error "com.android.process has stopped". Ignoring that, I just backed up my whole data. Did a factory reset. Updated
Boom!! Everything was normal... I hope this helps

Just a quick update - followed the method in the link that Joel referred to, and everything worked beautifully. I did get two error messages like “the contact stopped working..." “The process android.process.acore has stopped working.” I fixed this problem by clearing the data/cache from the "contact" app, and that did the trick without a factory reset etc.
I unrooted the device using SuperSU. The fastboot screen, however, still shows a random serial number 0123456789ABCDEF. Is there a way to revert it back to the real one? I do see the real one from settings - about - status.
xxmmx said:
Joel, thanks a lot! I will give it a try.
fingers and toes crossed...
Click to expand...
Click to collapse

xxmmx said:
Just a quick update - followed the method in the link that Joel referred to, and everything worked beautifully. I did get two error messages like “the contact stopped working..." “The process android.process.acore has stopped working.” I fixed this problem by clearing the data/cache from the "contact" app, and that did the trick without a factory reset etc.
I unrooted the device using SuperSU. The fastboot screen, however, still shows a random serial number 0123456789ABCDEF. Is there a way to revert it back to the real one? I do see the real one from settings - about - status.
Click to expand...
Click to collapse
Isn't everyone serial number the same? mine is.

This is something that I am not sure of. Yours has been rooted as well?
I would like to know what the fastboot screen looks like before rooting.
GGL-Daz said:
Isn't everyone serial number the same? mine is.
Click to expand...
Click to collapse

xxmmx said:
This is something that I am not sure of. Yours has been rooted as well?
I would like to know what the fastboot screen looks like before rooting.
Click to expand...
Click to collapse
Pretty sure rooting didn't affect my fastboot screen at all.

actually i rooted my zenfone 2 and there was an OTA and i tried to install it without un-rooting my phone. the phone would not turn on and it gets stuck in the boot animation.
the phone wasn't detected by the ADB in my pc so i thought of installing some custom recovery, thought that could help.
i tried installing TWRP but i did not unlock the bootloader and now i am not able to enter in recovery mode either, everytime i try to get in the recovery modethe phone restarts and goes to fastboot mode.
please help.

dip_anker said:
actually i rooted my zenfone 2 and there was an OTA and i tried to install it without un-rooting my phone. the phone would not turn on and it gets stuck in the boot animation.
the phone wasn't detected by the ADB in my pc so i thought of installing some custom recovery, thought that could help.
i tried installing TWRP but i did not unlock the bootloader and now i am not able to enter in recovery mode either, everytime i try to get in the recovery modethe phone restarts and goes to fastboot mode.
please help.
Click to expand...
Click to collapse
I was having a similar issue where adb wouldn't recognize my phone but fastboot was detecting it. What I ended up doing was grabbing the latest stock firmware zip from asus, transferring it to my external sd card via adapter and renamed it to MOFD_SDUPDATE.zip. Then go into fastboot (restart with volume up key) and proceed to recovery. It should automatically update your system from there. The only bummer is having to re-configure everything.

5ifty1 said:
I was having a similar issue where adb wouldn't recognize my phone but fastboot was detecting it. What I ended up doing was grabbing the latest stock firmware zip from asus, transferring it to my external sd card via adapter and renamed it to MOFD_SDUPDATE.zip. Then go into fastboot (restart with volume up key) and proceed to recovery. It should automatically update your system from there. The only bummer is having to re-configure everything.
Click to expand...
Click to collapse
i tried it with prerooted as well as the stock rom, it did not work for me. isn't there any way to flash CM12.1 using the fastboot ?

I just want to unroot!!!

Hey guys, im running 5.0.2 atm. i want to unroot my htc one m9 because i have no reason for it to be rooted really. i was hoping to be able to use game killer and those memory editors, but no available version for the new lollipop. so i want to unroot. I have the stock rom and adb files ready on my pc. but when i try to issue a command to my phone, it says the device is offline. and yes the pc's fingerprint is allowed. if you are going to suggest i download drivers or anything like that please link it. i have tried updating drivers and all that, says it is working properly. thanks in advance!!
EDIT: Ok as of right now, my main concern is flashing the stock rom, which i downloaded, and renamed the 0pjaimg.zip thing. I typed "fastboot flash zip 0pjaimg.zip" and it says "error can not load '0pjaimg.zip'" what do i do?

iSike said:
Hey guys, im running 5.0.2 atm. i want to unroot my htc one m9 because i have no reason for it to be rooted really. i was hoping to be able to use game killer and those memory editors, but no available version for the new lollipop. so i want to unroot. I have the stock rom and adb files ready on my pc. but when i try to issue a command to my phone, it says the device is offline. and yes the pc's fingerprint is allowed. if you are going to suggest i download drivers or anything like that please link it. i have tried updating drivers and all that, says it is working properly. thanks in advance!!
EDIT: Ok as of right now, my main concern is flashing the stock rom, which i downloaded, and renamed the 0pjaimg.zip thing. I typed "fastboot flash zip 0pjaimg.zip" and it says "error can not load '0pjaimg.zip'" what do i do?
Click to expand...
Click to collapse
Open SuperSU->Settings->Unroot?

j to the 4n said:
Open SuperSU->Settings->Unroot?
Click to expand...
Click to collapse
Yea I tried that, didn't work. I ended up almost having a heart attack haha. I went to wipe but accidentally wiped everything on my phone, my data , the root, and even the OS. I was stuck in download mode and boot loader, could not boot into recovery. And I was stupid enough to not have a backup. I ended up reflashing a ruu (thru my PC with a ruu utility) several times and it finally worked. My phone now is unrooted and I removed the boot loader. I achieved by beginning goal with a big hiccup before hand haha. I will now make a back up of my phone today lol. And I had titanium backup up, but it said I didn't have root access(when my device was rooted) so I figured if half the root perks weren't working, I'll just unroot, which I am happy I did. Don't have to worry about harming my device anymore. Game killer and all those memory editors didn't work anyway so root was useless to me

iSike said:
Yea I tried that, didn't work. I ended up almost having a heart attack haha. I went to wipe but accidentally wiped everything on my phone, my data , the root, and even the OS. I was stuck in download mode and boot loader, could not boot into recovery. And I was stupid enough to not have a backup. I ended up reflashing a ruu (thru my PC with a ruu utility) several times and it finally worked. My phone now is unrooted and I removed the boot loader. I achieved by beginning goal with a big hiccup before hand haha. I will now make a back up of my phone today lol. And I had titanium backup up, but it said I didn't have root access(when my device was rooted) so I figured if half the root perks weren't working, I'll just unroot, which I am happy I did. Don't have to worry about harming my device anymore. Game killer and all those memory editors didn't work anyway so root was useless to me
Click to expand...
Click to collapse
When I unrooted using SuperSu it ruined my installation also. I was stuck in a bootloop until I installed TWRP and reinstalled SuperSu, terrible!!! It eventually unrooted and I relocked bootloader but nothing worked so I was forced to root and unlock bootloader again.
I am wondering though, how did you return to stock? I really want the latest AT&T stock but when I install that RUU .exe it gives me error 155 so I can't install it. I was using 1.32 stock AT&T and wanted to install 2.6 (I think that's what it is, it's Android 5.1).
I am S-On, and not S-off, could that be an issue? Bootloader is unlocked and I am rooted now.

You know how u r supposed to rename the ruu u want to flash (assuming you downloaded the stock ruu for your carrier and device). The problem for me was, I could never connect my device thought adb after I rooted it (fast boot worked when I put it in fastboot). Even when I could give a command , it could never load the ruu. So what I did, was right click the ruu and click run as admin. It should open up a page on the top saying something about a ruu/rom utility. Make sure you device is connected and had usb debugging( before you got stuck in the loop hopefully). Now click accept and all that good stuff on the utility, it should scan your phone and show u your current rom image, and then show you the latest rom image. Click update and it will boot your phone to boot loader and begin sending it to your phone. IMPORTANT: DO NOT TOUCH YOUR PHONE. Now here's the catch, if it said it failed or something about a USB error, close the program and start it up again. If your phone is stuck without the download bar moving(displayed on your phone), you are going to have to hard reset it. Google how to do it for your device (just a button holding combination). And start the program again. It will take a couple times for the program to work (mine took about 5-6 times). But it will work sooner or later. I am not home atm, but when I get home, I will find the link to the page where this info is displayed in a more orderly fashion and with pictures. It will be tonight, probably about 9 hours. Try this though, if it is too confusing, wait till I post the link. Good Luck!!
EDIT: Sorry just got back home from a long day haha, I'll be sure to look for the link tomorrow. But my directions above should be good, give it a try.

Stuck on team win recovery project please help

I have no idea how to root or anything like that, I bought this oneplus 3 and had a update a week later.. so when I did the software update it took me into teamwin recovery mode and now I don't know how to get back into my phone please help....

Did you buy the phone second hand or did you try to flash TWRP yourself? It shouldn't have TWRP installed by default.
Regardless, you can use TWRP to flash the latest update.
Given that you have TWRP, I'm assuming that you have an unlocked bootloader. Did you notice a warning pop up everytime you reboot your phone before? It should say something along the lines of "your device has been unlocked and can't be trusted". If not, you'll have to unlock it (it wipes your phone in the process).
If the bootloader is unlocked, you can simply download and flash the latest zip for OOS 4.0.3 in TWRP. This will update you phone and replace TWRP with the stock recovery (so you don't run into this problem again in the future when installing an OTA). If you don't intend to modify your phone in any way, then this is all you need to do, your phone should be functional.
There are plenty of threads with detailed guides on how to do all of this.

I'm also stuck on TWRP after stupidly downloading the latest OTA and I don't know what to do!
Phone won't boot normal, just goes off.
Situation:
- Bootloader, Fastboot and TWRP wil load.
- Device seen by windows
- Zip install in TWRP gets stuck at 'patching zip unconditiontally'
- Another zip flashes, but gets stuck at the end, no reboot option (manually but that's not the way)
Can someone please point me in the right direction? I don't care if I lose data, just want my phone back!
not helping:
Saying i'm a dipsh-t I know, I know, I will do better in the future, for now, help a brother out please

sndr1384 said:
I'm also stuck on TWRP after stupidly downloading the latest OTA and I don't know what to do!
Phone won't boot normal, just goes off.
Situation:
- Bootloader, Fastboot and TWRP wil load.
- Device seen by windows
- Zip install in TWRP gets stuck at 'patching zip unconditiontally'
- Another zip flashes, but gets stuck at the end, no reboot option (manually but that's not the way)
Can someone please point me in the right direction? I don't care if I lose data, just want my phone back!
not helping:
Saying i'm a dipsh-t I know, I know, I will do better in the future, for now, help a brother out please
Click to expand...
Click to collapse
Simple, check the OnePlus D/L sites for this one http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img and flash it by TWRP or fastboot to RECOVERY. Boot once with the official Recovery and all ist fine again.

This is issue of using a faulty twrp so for that when ur phone us booting up go to fastboot and flash twrp 3.0.4-1 and everything will work

emuandco said:
Simple, check the OnePlus D/L sites for this one http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img and flash it by TWRP or fastboot to RECOVERY. Boot once with the official Recovery and all ist fine again.
Click to expand...
Click to collapse
Similar Problem here:
just wanted to flash latest OOS 4.0.3, so I flashed back stock recovery with flashify and rebooted into recovery mode to flash the already downloaded OOS 4.0.3. zip. That's when it began to go poop! After rebooting it just went dark with no Chance to power it on again! No dice with power button, Volume up/down + power button, nothing! Not even the LED's are blinking when plugged in. So this one seems to be basically dead!
I got it once booting again after randomly pushing the buttons (after x minutes!?), but everytime I reboot the phone it just shuts off without beeing able to power it on again. At the Moment it's dead!
Any ideas what might happened? If I get it on again, should I immediately reset it to factory Settings?
I am kinda lost here! Any help/ideas would be much appreciated!

Flashify? Never used it and never trusted apps which flash stuff on a running system. Use fastboot and reflash the recovery partition. Link to recovery is in my former post.
fastboot flash recovery PATHTOIMGFILE

Thank you for your advice! Still a lot to learn! Got it up again, will try as you suggested!

It appeared that my stock recovery file was corrupted , but all is fine again! Thank you very much!

Mannycolon85 said:
I have no idea how to root or anything like that, I bought this oneplus 3 and had a update a week later.. so when I did the software update it took me into teamwin recovery mode and now I don't know how to get back into my phone please help....
Click to expand...
Click to collapse
I may have been the person you traded with to get the OnePlus 3, but I took the phone back and after 5 hours I got it up and running.
The phone would boot to TWRP, but even after wiping the entire system and dragging a ROM zip to the internal storage, reinstalling did nothing. It just kept booting back to recovery.
The solution entailed the following.
Download stock recovery IMG. Flashed through TWRP. Rebooted recovery and now was back to stock recovery.
Download the official OxygenOS ROM zip from the OnePlus website and changed the name to update.zip
Next I downloaded Android studio for access to ADB. I had never used ADB before, but I knew this was needed to push a file to the phone.
Needless to say, ADB kept freezing my computer when I would type in the commands to side load.
I deleted Android studio and installed a minimal ADB/Fastboot I found online. I opened my command prompt, typed the command for sideloading, and immediately got my installation starting. It took about 10 minutes to fully install. When it was finished, I rebooted and had a fully functioning OnePlus 3
Sent from my ONEPLUS A3000 using Tapatalk

Help, might have killed my device

Not 100% sure of best place to post this, but I'm getting desperate now...
I'm pretty worried I've killed my device. After following the guide on how to root with Magisk, my phone is stuck on the white "loading" screen with a G logo. I've since tried to restart, but I can either go into fastboot mode or get the white screen when attempting to boot into android.
Tried to flash the latest factory image to fix it, but that couldn't get that to work. Now the phone isn't showing up on adb devices either. panicking a little bit here.
Does anyone know what to do?

ADB won't work unless the phone is booted into Android or in stock recovery for a sideload.
Does your computer recognize the device when you are in Fastboot mode and type "fastboot devices"? Try flashing the factory image again but make sure you have the most up to date platform tools from Google. Old versions are a common cause of issues.
Did you flash TWRP recovery or just boot to it to root? If you still have stock recovery you can try a factory reset from there but any modified images you installed might be the issue.

like Fury said, your platform tools need to be updated, same thing happened to me.

What didn't work when you flashed the factory image? Do you have the latest sdk tools version of fastboot and adb?
Sent from my [device_name] using XDA-Developers Legacy app

fury683 said:
ADB won't work unless the phone is booted into Android or in stock recovery for a sideload.
Does your computer recognize the device when you are in Fastboot mode and type "fastboot devices"? Try flashing the factory image again but make sure you have the most up to date platform tools from Google. Old versions are a common cause of issues.
Did you flash TWRP recovery or just boot to it to root? If you still have stock recovery you can try a factory reset from there but any modified images you installed might be the issue.
Click to expand...
Click to collapse
Thanks so much, this is where I was going wrong. Have gone into recovery and rescued it.
Tried the process again to get Magisk working, but ended up the same although this time the white screen only went on for a while before I got an error saying my data was corrupted. Tbh, after all the stress I'm just going to give up on this and live with the phone in stock. All my drivers and adb were installed and setup today, so everything is up to date.
edit...
Not out of the woods yet. After restarting the phone and going through the setup, it's not detecting the SIM card or any wifi networks. I've installed the OTA and wiped data once more after having this problem, still not resolved.

Nick676 said:
Thanks so much, this is where I was going wrong. Have gone into recovery and rescued it.
Tried the process again to get Magisk working, but ended up the same although this time the white screen only went on for a while before I got an error saying my data was corrupted. Tbh, after all the stress I'm just going to give up on this and live with the phone in stock. All my drivers and adb were installed and setup today, so everything is up to date.
Thanks again for helping.
Click to expand...
Click to collapse
It sounds like you are trying to install Magisk v17.1 like I tried. If so you need to use v17.3 beta. If you follow this thread you should be fine. It even tells you what to do for your original problem, just takes some reading and patience.

Misterxtc said:
It sounds like you are trying to install Magisk v17.1 like I tried. If so you need to use v17.3 beta. If you follow this thread you should be fine. It even tells you what to do for your original problem, just takes some reading and patience.
Click to expand...
Click to collapse
I tried it with both 17.1 and 17.3, so not sure what the issue is. Seem to have finally booted up properly with wifi and signal working, so hopefully it's all good now. Gonna give up on rooting.

Nick676 said:
Not 100% sure of best place to post this, but I'm getting desperate now...
I'm pretty worried I've killed my device. After following the guide on how to root with Magisk, my phone is stuck on the white "loading" screen with a G logo. I've since tried to restart, but I can either go into fastboot mode or get the white screen when attempting to boot into android.
Tried to flash the latest factory image to fix it, but that couldn't get that to work. Now the phone isn't showing up on adb devices either. panicking a little bit here.
Does anyone know what to do?
Click to expand...
Click to collapse
you may want to try to totally uninstalling Magisk frist with the official latest Magisk uninstaller and reboot and then do a complete factory reset. this has helped me in the past.
my new pixel 3XL will be the first Android phone that I owned that will not be rooted.