Hi,
I need help because my android car unit is currently stuck on the Android splash screen, before that problem the unit has worked well during 5 months.
I have sent a mail to the seller but i'm waiting for a response.
Here is the unit, this is exactly the same but mine running on android 6.1 :
search on aliexpress -> Uniway ZLKLZ7071
My question is : How do i can enter in the recovery mode ?
I mean that i proceed to a hard reset with a wipe cache...
But i have tried some combination key but not chance i can't enter to the recovery mode.
The canbus link is ok i can increase or reduce the sound and i can hear only one band on radio but android won't start and i see only the android splashscreen.
Can you help me ?
Thank you.
the seller never responds to me.
I have purchased other unit.
Don t buy uniway gps unit stay away.
Related
Hi Guys!
Please help! A couple a days ago, I tried to update de Radio Rom to 1:15:00 on my Siemens Sx66. All went fine untill the phone got stuck in the Boot Loader mode displaying USB (or Serial if disconnected from the cradle) and V 2.07. I removed the main battery and the sim card let it "rest" for ....two days now. Every 6-8 hours I checked to see if it works by connecting the battery for no more than 4-5 seconds.
Please help! How can I get it out of this boot loader mode??
Costin
Press power button and reset button at the same time
I tried
I tried. Is not working!.
Costin
If its in bootloader and you cant get it out try:
Taking out the battery overnight so that the backup battery dies.
Reflash the radio with one you know that works.
Bootloader
First, thanks for replying to me!
I tried leaving the phone with the battery disconnected. Is been like that for the last 3 days. Every time I connect it for few seconds just to check if it works......I can see the same think on the screen : Serial V 2.07. It seems is stuck in the boot loader. Any idea how to get it out of that so I can upload a Radio ROM version that works?
Do you guys know any software that will communicate with the craddled phone while in Bootloader mode?
Costin
You have not mentioned if you have tried to refalsh it (or have I sugest that before)
Reflash
Yes, I tried to upgrade the Radio Rom from 1:13:00 to 1:15:00 and it got stuck in the bootloader mode.
Costin
stuck in bootloader mode
I am currently stuck in bootloader mode. Was a resolution ever found?
Stuck in boot loader mode
I have the same issue! Help please!
Have you checked http://forum.xda-developers.com/viewtopic.php?t=43592&highlight=usb+mode
?
bootloader grayscreen/serial problem
read link but can we use solution for universal on BA?
also saw something about platform builder. what is / how might one use that to solve problem? didn't see explanation or instructions
hope to hear back,
woodalia
flashing with working radio
how can we flash with a working radio if the screen says serial/usb? tried hard reset after leaving overnight and still there. looked at link and that is for universal. going to continue reading but if anyone has other suggestions would appreciate.
thanks all
mdaIII comes through again.
even with gray screen you can use updater to do radio rom only. system reset accomplished and back to normal stardate sept. 1, 2004.
used radio 1.13 for update. took about 10 minutes
thanks a bunch mdaIII
I have searched the internet high and low - found many threads in many forums about the O2 XDA IIs being stuck on boot screen and wont hard reset and NO, I mean NOT a single solution posted anywhere despite the numbers of people with exactly the same problem as me.
It will enter boot loader mode and will flash with WM5 or 6 but neither have working camera or sound.
I have flashed it with Ship versions of O2 and even T-Mobile roms but both freeze at the boot screen and wont do anything else, pressing the usual buttons to get it to hard reset don't work.
So unless anyone can help me either restore the factory rom and solve the frozen boot screen or fix the sound / camera I am going to smash it to little pieces and throw it in the bin.
arcnet said:
So unless anyone can help me either restore the factory rom and solve the frozen boot screen or fix the sound / camera I am going to smash it to little pieces and throw it in the bin.
Click to expand...
Click to collapse
Don't do that, tell me the cost and post it to me. I can use the spare parts.
Seriously, what have you tried so far? (I missed the earlier posts).
Are you getting stuck at the four colour boot screen, or at the WM splash screen?
Thanks for the reply Jdc - lol - for a second I thought you were serious about the parts.
I have tried sooo much with this thing I cant remember what I haven't tried now. But to recap when I first got the Xda IIs it was locked to O2 and stuck on the boot screen with the O2 logo and the red writing in bottom left corner showing rom version. Nothing seems to shift from this state, no reset hard or soft makes any difference - take out the battery and when put back in and powered up sticks at the boot screen.
However - I can get it into bootloader mode and merrily flash WM5 or 6 which appear to work perfectly but there is no sound whatsoever and the camera says it fails to initialize the hardware please reset.
I then reflashed it with an O2 stock Ship rom - presumably WM2003 and it is exactly as it was at the start - stuck on the boot screen showing the O2 logo and rom versions.
I even tried a T-Mobile ship rom of the same version and it stuck on the T mobile boot screen.
Arrrgh!!!! I am at my wits end with it - maybe it is faulty somehow and this is not a software fault - I wish there was some diagnostic I could run on it and find out.
I currently have WM6.11 running well but as I said with no sound or camera.
Hope you can suggest something I may have overlooked or done wrong - I am new to this and it is very possible I have missed something.
arcnet said:
Thanks for the reply Jdc - lol - for a second I thought you were serious about the parts.
Click to expand...
Click to collapse
Well, I am, kind of. I have an XDA IIs as well that needs some replacement parts, so if you are going to smash the thing, I'll pay the post to send it my way.
Anyway...
arcnet said:
I have tried sooo much with this thing I cant remember what I haven't tried now. But to recap when I first got the Xda IIs it was locked to O2 and stuck on the boot screen with the O2 logo and the red writing in bottom left corner showing rom version. Nothing seems to shift from this state, no reset hard or soft makes any difference - take out the battery and when put back in and powered up sticks at the boot screen.
Click to expand...
Click to collapse
Hrm...
When it is stuck the boot screen, what does the R, G and D lines show? I'm wondering if the radio ROM might be buggered up. However, you do say that it's working... mostly...
arcnet said:
However - I can get it into bootloader mode and merrily flash WM5 or 6 which appear to work perfectly but there is no sound whatsoever and the camera says it fails to initialize the hardware please reset.
Click to expand...
Click to collapse
No sound... As in playing a sound file with WMP doesn't even produce anything?
Can you use it as a phone normally?
Have you opened it up to see if the camera and speaker(s) are loose?
One other thing to try, if you don't mind doing another hard reset:
1. Download mtty v1.42
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete) kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001 (If you only see COM 1 and COM 2, try unplugging the USB and replugging it)
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
The wierdest thing happened.
Have to say that none of the suggestions or ideas (though welcome) helped. I reflashed the WM6.1 after flashing latest radio rom. Still no sound and camera.
Last night I had kept the battery out for a few hours and then on replacing it had to do reset - hey presto after all this time the sound worked and so does the camera.???? I have absolutely no idea what I did to fix it - almost as if it needed resetting a few times - cant think what else I have done.
Anyway I am happy bunny now - it all seems to be working perfectly.
Excellent! Glad that it's working for you now, hopefully it stays working as well.
If it doesn't, don't bin it, PM me and we can talk.
Lol - sorry Jdc but i wont be parting with it now - it all works perfectly even the phone is superb now which just goes to show that even when it looks like a hardware fault it is often software - a typical PC in other words.
Cheers
arcnet said:
Lol - sorry Jdc but i wont be parting with it now
Click to expand...
Click to collapse
Well bugger. No worries, glad it's working for you.
arcnet said:
it all works perfectly even the phone is superb now which just goes to show that even when it looks like a hardware fault it is often software - a typical PC in other words.
Cheers
Click to expand...
Click to collapse
Well, a typical windows machine. My UNIX and Mac's rarely go and burble to themselves like my windows machines do at times.
Hi All
I'm a newbie to the android stuff, so really could do with some guidance. Apologies if I have posted in the wrong section.
I have a android tablet which was branded as cloudnine neuropad 16gb hdd 1gb ddr version
Anyway, my daughter tried the password to many times therefore locked out and we didn't realise that the wifi has a sleep mode, therefore wifi went to sleep which in turn does not allowed use of the reset password option. DOh!!
Anyway I tried the soft reset option pressing vol up and power, but the android falls down with the yellow triangle and exclamation mark being presented.
I have contacted the seller via amazon and as it is out of warranty, they suggest updating the LY-F1 firmware, which I have done using livesuitpack v 1.09 forums suggest doing this twice so I have. I have used the firmware available from lyxfsz dotcom website. downloading a couple versions just in case for the F1 series.
The problem I have is that after flashing the unit twice, all I get is a blank white screen when powering up.
Any suggestions/instructions would be welcome, to get the unit up and running for my girls.
Thanking you in advance.
mm
Hello everyone
I bought recently a MTCE PX5 from Witson (MTCE_MX2_V2.87 - android 8 - 8 cores -32giga flash).
It worked perfectly and rooting it was a success.
But Yesterday... the HU rebooted and then nothing : the Oreo screen and then it's locked on the carmaker logo...
I would like to enter in the recovery mode but there is no physical button or reset hole, onlu the touchscreen.
So I tried the method with the keyboard and the Right AltGr+PrintScreen an then pressing rapidly the E... but it didn't work until now.
Before going to step 2 (STM32 programmer), does anybody have tried successfully this method ?
If yes can you tell me if there a sort of trick to get it work ?
Thanks a lot.
fabrice92800 said:
Hello everyone
I bought recently a MTCE PX5 from Witson (MTCE_MX2_V2.87 - android 8 - 8 cores -32giga flash).
It worked perfectly and rooting it was a success.
But Yesterday... the HU rebooted and then nothing : the Oreo screen and then it's locked on the carmaker logo...
I would like to enter in the recovery mode but there is no physical button or reset hole, onlu the touchscreen.
So I tried the method with the keyboard and the Right AltGr+PrintScreen an then pressing rapidly the E... but it didn't work until now.
Before going to step 2 (STM32 programmer), does anybody have tried successfully this method ?
If yes can you tell me if there a sort of trick to get it work ?
Thanks a lot.
Click to expand...
Click to collapse
Ask your seller
They must have a procedure for the case the unit get bricked
Enviado desde mi SM-G950F mediante Tapatalk
Hello, i have a problem on my Thomson 55US6106. After touching in developper mod in show pointer or something like this the TV has freeze and after shutdown she always turn on the android logo.. i see few person in my case but i don't find any solution for my TV.
I have tried to downland new software on mytomson but after the installation it's always the same.
Tried to wait 48 hours but after 48 hours it's always on the boot logo.
Tried to click all the buttons on the back of TV (remote don't work in the boot).
Thomson don't want help me cause it's not guaranted.. I hope somewone can help me thank you in advance and nice day.
Few tips about my TV :
Ticket on the back of TV 55US6106
On the main board :
MT58CU
Soft V
40-MT58CU-MAB4HG
55UC6596
08-MT58011-MA200AA
08-CS55CUN-OC407AA
08-MT58011-MA300AA
V8-T658T01-LF1V176 12V
It's all I find on the main board and if you need more, just ask. Thank you so much for who can help me. For 1 300€ i hope the TV will work more than 2,5 years.
Best regards
Flashed PKG file?
I don't really know how flash pkg file or what is exacly
Is complete wipe previous firmware and install new ...as factory reset.
Attached ....
Oh this, yes I have already tried. I download the software on Mytompson but it's always the same :/ The boot android logo loop loads
Thank you friend