hey i have a samsung a3 that a rolledback to 4.4.4 from 5.0.1 however scince odin restarted it it didnt do anything not showing any sings of
life not powering up not even shaking if i plug in my charger?
is this phone ready for the recycle bin or do i have to wait longer?
this forum is for a3/5/7 2017
edit: besides that can u enter download mode? did you try to downgrade your modem to?
nekos95 said:
this forum is for a3/5/7 2017
edit: besides that can u enter download mode? did you try to downgrade your modem to?
Click to expand...
Click to collapse
as i usually do i flash it on everything but it doesn't start it doesn't do anything adb doesn't register it too
Generaaleric said:
as i usually do i flash it on everything but it doesn't start it doesn't do anything adb doesn't register it too
Click to expand...
Click to collapse
try to flash the lastest firmware again not 4.4 also try different odin versions starting from 3.10.7 then try newer if it still doesnt boot
nekos95 said:
try to flash the lastest firmware again not 4.4 also try different odin versions starting from 3.10.7 then try newer if it still doesnt boot
Click to expand...
Click to collapse
cant system and phone are in-responsive have no idea if its crashed most likely is though it have zero control over it
you mean your pc is broken to?
nekos95 said:
you mean your pc is broken to?
Click to expand...
Click to collapse
no i mean my phones system
Related
After running into some issues while upgrading to an official kitkat firmware I managed to boot up my phone but now it doesnt get recognized by kies even though its official. I also cant see which csc Im on since when I type in *#1234# it simply goes away from the screen as if its been wiped.
any clues? should i flash something else over?
kostas90 said:
After running into some issues while upgrading to an official kitkat firmware I managed to boot up my phone but now it doesnt get recognized by kies even though its official. I also cant see which csc Im on since when I type in *#1234# it simply goes away from the screen as if its been wiped.
any clues? should i flash something else over?
Click to expand...
Click to collapse
What did you use to upgrade? Kies? or Odin?
feckinfinch said:
What did you use to upgrade? Kies? or Odin?
Click to expand...
Click to collapse
Odin
kostas90 said:
Odin
Click to expand...
Click to collapse
Try flashing this in the attachments using odin the same wayy you did the stock firmware, just extract the rar file and use the .md5, and then do a full factory reset then it should recognize.
forget KIES ( completely useless) ! flash SamMobile's firmwares with ODIN !
feckinfinch said:
Try flashing this in the attachments using odin the same wayy you did the stock firmware, just extract the rar file and use the .md5, and then do a full factory reset then it should recognize.
Click to expand...
Click to collapse
Ill get around to it in a few days when my exams will be over. need to back everything up first and that will take a minute. thanks!!
So my tablet has been giving me so much trouble rebooting and apps stopping so i flashed stock 4.1.2 via odin and this is what happened it doesn't even go through the set up
kgalv419 said:
So my tablet has been giving me so much trouble rebooting and apps stopping so i flashed stock 4.1.2 via odin and this is what happened it doesn't even go through the set up
Click to expand...
Click to collapse
Did you put into bootloader mode to flash?
Try another firmware from sammobile you don't say where you are from so cannot suggest which.
deakodude said:
Did you put into bootloader mode to flash?
Try another firmware from sammobile you don't say where you are from so cannot suggest which.
Click to expand...
Click to collapse
I put it in download mode, aparently it says it is in factory mode
kgalv419 said:
I put it in download mode, aparently it says it is in factory mode
Click to expand...
Click to collapse
Are you doing that by holding volume and power button ?
Try flashing agin I use odin 3.7.
deakodude said:
Are you doing that by holding volume and power button ?
Try flashing agin I use odin 3.7.
Click to expand...
Click to collapse
yes of course i know how to do all that i already flashed odin over and over i think it has something to do with those files in root of the device must be corrupted or somthing
kgalv419 said:
yes of course i know how to do all that i already flashed odin over and over i think it has something to do with those files in root of the device must be corrupted or somthing[/QUOTE
Have you done a factory reset?
Then go to sammobile to get original firmware.
Click to expand...
Click to collapse
kgalv419 said:
So my tablet has been giving me so much trouble rebooting and apps stopping so i flashed stock 4.1.2 via odin and this is what happened it doesn't even go through the set up
Click to expand...
Click to collapse
k,
that looks odd. you might be booting into safe-mode. research it.
m
another thought, if you are able to navigate to settings there may be an in-house factory reset option
you can try. again, research it.
I am trying to flash the stock firmware in Odin but it always fails. Everything works fine until "NAND Write Start" then it just fails. Any suggestions? I am using the latest version of Odin and the firmware from this thread: http://forum.xda-developers.com/tmobile-galaxy-s6-edge/general/odin-stock-firmwares-t3081165
Did you try smart switch?
Remember reading somewhere in the thread about odin failure and finally getting smartswitch to restore phone.
Pp.
Smart Switch won't recognize it.
calebcaudill said:
Smart Switch won't recognize it.
Click to expand...
Click to collapse
try emergency recovery using model # and S/N
assem_2222 said:
try emergency recovery using model # and S/N
Click to expand...
Click to collapse
So I finally got Odin to flash the stock firmware but now I can't get the phone to boot into recovery, the screen just freezes.
calebcaudill said:
So I finally got Odin to flash the stock firmware but now I can't get the phone to boot into recovery, the screen just freezes.
Click to expand...
Click to collapse
This is the same exact scenario that everyone else that tries using odin runs into.
Don't think there's anything you can do but wait for a smart dev to figure it out or for Samsung to release the build source that devs need to fix it.
Maybe you have a spare phone to use.
Pp.
I have run Odin and flashed 5.0 a few times and can get into recovery just fine. But I haven't tried Odin 5.1 though.
Some people just post info and never post links . I had firmware for sometime already but i was waiting for other guy to post it. I know we all looking for full Odin files so here they are :
AP_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship_meta.tar
CSC_ATT_N920AATT4EQC6_CL10809541_QB12921033_REV00_use r_low_ship.tar
CP_N920AUCU4EQC6_CP6021124_CL10809541_QB12921033_REV 00_user_low_ship.tar
BL_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship.tar
Download Link of :
Nougat_N920AUCU4EQC6_Odin_Files
All this files are in one zip. Unzip and put this in appropriate windows in ODIN.
Here are Odin 3.12.3
Good Luck.
Of course, this will wipe my device again, even though I do not select the CSC?
If you allow it to flash a new system and user data image then yes.
You basically need a wipe anyways going from MM to Nougat.
Sent from my Galaxy Note5 using XDA Labs
I'm already on Nougat N920AUCU4EQC5. I'm just trying to avoid having to wipe my phone
When i use this. It passes Odin then when the phone tries to reboot and install the update it says deleting then im back to 6.0.1. Any idea why?
norbarb said:
Some people just post info and never post links . I had firmware for sometime already but i was waiting for other guy to post it. I know we all looking for full Odin files so here they are :
AP_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship_meta.tar
CSC_ATT_N920AATT4EQC6_CL10809541_QB12921033_REV00_use r_low_ship.tar
CP_N920AUCU4EQC6_CP6021124_CL10809541_QB12921033_REV 00_user_low_ship.tar
BL_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship.tar
Download Link of :
Nougat_N920AUCU4EQC6_Odin_Files
All this files are in one zip. Unzip and put this in appropriate windows in ODIN.
Good Luck.
Click to expand...
Click to collapse
thank you very much for the link, bro.. i'm already Nougated now. experiencing some blue screen, but when i'm using newest odin.. all fixed.. thx again, man, you are the best.
DuganNash said:
When i use this. It passes Odin then when the phone tries to reboot and install the update it says deleting then im back to 6.0.1. Any idea why?
Click to expand...
Click to collapse
You may use wrong odin, some security installed on your phone, What build are you on?
norbarb said:
You may use wrong odin, some security installed on your phone, What build are you on?
Click to expand...
Click to collapse
It is Odin 3.12 run as admin. it gives me the green pass, then bootloader rolls back to MM
I am on build QB2 as of now.
DuganNash said:
It is Odin 3.12 run as admin. it gives me the green pass, then bootloader rolls back to MM
I am on build QB2 as of now.
Click to expand...
Click to collapse
Can you post your about phone screen ?
norbarb said:
Can you post your about phone screen ?
Click to expand...
Click to collapse
here you go, thank you
DuganNash said:
here you go, thank you
Click to expand...
Click to collapse
Thanks. Ok. Do you have any security like any kind encryption installed on your phone ?
I update first post with newest ODIN. Are you unzipping file you download and put tar files in correct windows? Are you in Download mode when using ODIN ?
norbarb said:
Thanks. Ok. Do you have any security like any kind encryption installed on your phone ?
I update first post with newest ODIN. Are you unzipping file you download and put tar files in correct windows? Are you in Download mode when using ODIN ?
Click to expand...
Click to collapse
I'm not sure about security . It was a stock at note 5 until I tried updated to qb2. All dev factors are turned on, and the rar files are all unzipped and loaded through odin in download mode. It passes then the android update screen (the little robot ) says erasing upon revoot and I boot into mm again
DuganNash said:
I'm not sure about security . It was a stock at note 5 until I tried updated to qb2. All dev factors are turned on, and the rar files are all unzipped and loaded through odin in download mode. It passes then the android update screen (the little robot ) says erasing upon revoot and I boot into mm again
Click to expand...
Click to collapse
OK. Try this , After you unzip from one zip to 4 files , unzip all 4 files to tar.md5 and try ODIN again. Check for any encryption installed on your phone preventing bootloader from overwriting files.
norbarb said:
OK. Try this , After you unzip from one zip to 4 files , unzip all 4 files to tar.md5 and try ODIN again. Check for any encryption installed on your phone preventing bootloader from overwriting files.
Click to expand...
Click to collapse
i tried this after making sure the phone was not encrypted under the security setting. Same result unfortunately. am looking for alternatives
You're the man !! just the files Odin I was looking for. I want to marry with you ... make me a son jajaja
DuganNash said:
i tried this after making sure the phone was not encrypted under the security setting. Same result unfortunately. am looking for alternatives
Click to expand...
Click to collapse
You have to necessarily erase the security lock fingerprints, you also have to remove the password lock, you have not any type of security lock, then you have to enable developer options and type USB debugging(This last one I do not know if it is strictly necessary, but just in case)If you have some security lock on your phone, even if you pray, you will not be able to!
After update installation it is sayin(device didn't have DRK,please install DRK first)
Please help me
Thanks
TaimooR Khawaja said:
After update installation it is sayin(device didn't have DRK,please install DRK first)
Please help me
Thanks
Click to expand...
Click to collapse
What did you flash before this stock firmware?
DRK=device root key
Clicking from Edge of Galaxy
Just a thought, can you Odin flash any other version of the official AT&T firmware? Maybe try another version to see if the phone is truly screwed.
Also, have you tried a factory reset on the phone first. Maybe something (anything) loaded on the phone is preventing the Odin flash. I know this shouldn't matter but it's worth a try.
mattern1974 said:
Just a thought, can you Odin flash any other version of the official AT&T firmware? Maybe try another version to see if the phone is truly screwed.
Also, have you tried a factory reset on the phone first. Maybe something (anything) loaded on the phone is preventing the Odin flash. I know this shouldn't matter but it's worth a try.
Click to expand...
Click to collapse
Same here.. i try to flash it via odin v3.12 it showing pass message..
After reboot my phone still on MM 6.0.1
I see that TWRP users have experienced a touchscreen issue, so they need to use an OTG cable with wireless mouse. Does anyone know when will the touch issue be fixed?
NickDeveloper said:
I see that TWRP users have experienced a touchscreen issue, so they need to use an OTG cable with wireless mouse. Does anyone know when will the touch issue be fixed?
Click to expand...
Click to collapse
So, we don't know when will be fixed
NickDeveloper said:
I see that TWRP users have experienced a touchscreen issue, so they need to use an OTG cable with wireless mouse. Does anyone know when will the touch issue be fixed?
Click to expand...
Click to collapse
But you can use the OTG touch twrp
Arobase40 said:
I experimented this no touch TWRP but it is mostly buggy excluding the non touch issue there is a bigger issue which is that once installed you can't get out from it as it bootloops into this recovery mode. Flashing a stock recovery won't change anything.
You will have to totally restock your phone from scratch and then re root it and restore all your apps and data !!! ^^
I found out the twrp tree for A52 4G and was able to build a TWRP but obviously I can't test it.
I'm not able to build a twrp for A52S 5G for now as there are missing many kernel modules and other stuffs so I have to build them from kernel source code. So for now I'm working on the device and vendor config files...
Click to expand...
Click to collapse
But how can I fix my phone if I get a bootloop?
Arobase40 said:
You can't that is why I don't recommend you to use this no touch TWRP !
I was told to use a multidisabler but doesn't seem to work...
Click to expand...
Click to collapse
But it is only a soft brick, there is no need to change the motherboard. Would there be a way to reinstall stock firmware with Odin?
Arobase40 said:
I didn't say it will break your motherboard but if you want to waste your time in restocking your phone it's up to you.
Click to expand...
Click to collapse
Can I reinstall stock firmware with Odin? Will it work?
NickDeveloper said:
Can I reinstall stock firmware with Odin? Will it work?
Click to expand...
Click to collapse
Yes.
Arobase40 said:
As I said if you want to waste your time, YES you can reinstall stock firmware but of course you will lose your no touch twrp...
You will have to choose one or the other but not both...
Click to expand...
Click to collapse
Unfortunately, I have tried to reinstall stock firmware, but it failed. Looks like my bootloader became locked. Odin software showed "FAIL". There was a message that I could barely read, so that was the reason it failed to reinstall the firmware.
What should I do now?
Arobase40 said:
You can't that is why I don't recommend you to use this no touch TWRP !
I was told to use a multidisabler but doesn't seem to work...
Click to expand...
Click to collapse
So you got stuck in a bootloop after installing twrp. Have you tried just extracting the stock boot.img from firmware AP file and flashing it with odin? I really don't get it why you had to reinstall everything to stock. It's not necessary to reflash every partition if you only messed up one
Arm1nas said:
So you got stuck in a bootloop after installing twrp. Have you tried just extracting the stock boot.img from firmware AP file and flashing it with odin? I really don't get it why you had to reinstall everything to stock. It's not necessary to reflash every partition if you only messed up one
Click to expand...
Click to collapse
Nope, I did not make the backup of anything. Unfortunately, my bootloader is now locked and I cannot reinstall stock firmware. What now??
NickDeveloper said:
Nope, I did not make the backup of anything. Unfortunately, my bootloader is now locked and I cannot reinstall stock firmware. What now??
Click to expand...
Click to collapse
While the phone is completely off, press vol up and vol down buttons at the same time and then plug in the usb cable to the computer. I had that happen too, when the device fails to boot it automatically puts you into download mode and it says that the OEM LOCK is on. You just have to reboot to download mode manually.
Arm1nas said:
While the phone is completely off, press vol up and vol down buttons at the same time and then plug in the usb cable to the computer. I had that happen too, when the device fails to boot it automatically puts you into download mode and it says that the OEM LOCK is on. You just have to reboot to download mode manually.
Click to expand...
Click to collapse
But how can I reinstall stock firmware when the OEM is locked? I tried to reinstall with all required binaries, including HOME_CSC and it showed "FAIL".
NickDeveloper said:
But how can I reinstall stock firmware when the OEM is locked? I tried to reinstall with all required binaries, including HOME_CSC and it showed "FAIL".
Click to expand...
Click to collapse
You don't need to unlock bootloader to flash stock fw with Odin.
Your problem is most likely related to something else.
Where did you download your fw?
Have you tried different cables?
What Odin version are you trying?
ShaDisNX255 said:
You don't need to unlock bootloader to flash stock fw with Odin.
Your problem is most likely related to something else.
Where did you download your fw?
Have you tried different cables?
What Odin version are you trying?
Click to expand...
Click to collapse
I don't understand why would it be possible to flash stock firmware with locked bootloader, I thought that locked bootloader won't allow the OS to be reinstalled.
NickDeveloper said:
I don't understand why would it be possible to flash stock firmware with locked bootloader, I thought that locked bootloader won't allow the OS to be reinstalled.
Click to expand...
Click to collapse
A Locked bootloader will prevent you from installing any custom things, like recovery or custom roms. It will allow you to install stock firmware via odin. Use Odin 3.14 to install firmware downloaded from here. Use the AP, Bl, Cp, and CSC_OXM files. That will get you started from scratch, all previous data and stuff will be deleted.