huge prohlem need help fast - Galaxy Tab 3 Q&A, Help & Troubleshooting

So my tablet has been giving me so much trouble rebooting and apps stopping so i flashed stock 4.1.2 via odin and this is what happened it doesn't even go through the set up

kgalv419 said:
So my tablet has been giving me so much trouble rebooting and apps stopping so i flashed stock 4.1.2 via odin and this is what happened it doesn't even go through the set up
Click to expand...
Click to collapse
Did you put into bootloader mode to flash?
Try another firmware from sammobile you don't say where you are from so cannot suggest which.

deakodude said:
Did you put into bootloader mode to flash?
Try another firmware from sammobile you don't say where you are from so cannot suggest which.
Click to expand...
Click to collapse
I put it in download mode, aparently it says it is in factory mode

kgalv419 said:
I put it in download mode, aparently it says it is in factory mode
Click to expand...
Click to collapse
Are you doing that by holding volume and power button ?
Try flashing agin I use odin 3.7.

deakodude said:
Are you doing that by holding volume and power button ?
Try flashing agin I use odin 3.7.
Click to expand...
Click to collapse
yes of course i know how to do all that i already flashed odin over and over i think it has something to do with those files in root of the device must be corrupted or somthing

kgalv419 said:
yes of course i know how to do all that i already flashed odin over and over i think it has something to do with those files in root of the device must be corrupted or somthing[/QUOTE
Have you done a factory reset?
Then go to sammobile to get original firmware.
Click to expand...
Click to collapse

kgalv419 said:
So my tablet has been giving me so much trouble rebooting and apps stopping so i flashed stock 4.1.2 via odin and this is what happened it doesn't even go through the set up
Click to expand...
Click to collapse
k,
that looks odd. you might be booting into safe-mode. research it.
m
another thought, if you are able to navigate to settings there may be an in-house factory reset option
you can try. again, research it.

Related

[Q/HELP] Firmware upgrade encountered an issue. Please select blah blah..

Hello, my dumb ass decided to root using CFRoot, then it said it failed so I tried to flash the CFAutoRoot in Odin. Well, I tried booting my phone, after saying f*** it, and now I'm greeted with 'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.' what can I do? I just bought this phone, so if I screwed it up, I'm in trouble.
What phone and what rom is it running?
audit13 said:
What phone and what rom is it running?
Click to expand...
Click to collapse
SGH-I747(AT&T Samsung Galaxy 3), and the stock 4.3 rom
Unfortunately, there is no way to flash a stock AT&T 4.3 ROM to this phone as AT&T never released a full ROM, only an update.
Did you try reconnecting it to Kies to try and re-flash?
audit13 said:
What phone and what rom is it running?
Click to expand...
Click to collapse
audit13 said:
Unfortunately, there is no way to flash a stock AT&T 4.3 ROM to this phone as AT&T never released a full ROM, only an update.
Did you try reconnecting it to Kies to try and re-flash?
Click to expand...
Click to collapse
I'm on 4.3 update I meant, and how can I reflash? I'm in Kies now.
Wesley. said:
I'm on 4.3 update I meant, and how can I reflash? I'm in Kies now.
Click to expand...
Click to collapse
Does Kies detect your phone at all? Is there a recover option? Sorry, I haven't used Kies for a long time so I don't remember what options are available.
Maybe this will help: http://www.samsung.com/us/support/faq/FAQ00052703/61329
audit13 said:
Does Kies detect your phone at all? Is there a recover option? Sorry, I haven't used Kies for a long time so I don't remember what options are available.
Click to expand...
Click to collapse
I went to tools -> Firmware upgrade and initialization, entered my model # & S/N, and it's 'Downloading file for firmware emergency recovery of 'GALAXY S III '(SGH-I747)' from the server...' so it says, which I got to from Kies. Should I let it run its course?
Wesley. said:
I went to tools -> Firmware upgrade and initialization, entered my model # & S/N, and it's 'Downloading file for firmware emergency recovery of 'GALAXY S III '(SGH-I747)' from the server...' so it says, which I got to from Kies. Should I let it run its course?
Click to expand...
Click to collapse
I'm not sure as I have never used this Kies option. I have always re-flashed via Odin. Your case is different because there is no full 4.3 AT&T Rom that can be flashed via Odin.
Is there any warranty on your phone?
audit13 said:
I'm not sure as I have never used this Kies option. I have always re-flashed via Odin. Your case is different because there is no full 4.3 AT&T Rom that can be flashed via Odin.
Is there any warranty on your phone?
Click to expand...
Click to collapse
It says Warranty Bit: 1 on Download mode
Wesley. said:
It says Warranty Bit: 1
Click to expand...
Click to collapse
Looks like you tripped the Knox counter when you tried to root the phone. Did you get it from AT&T? Maybe you could take it back and get it exchanged for another one since it got pooched while running Kies?
audit13 said:
Looks like you tripped the Knox counter when you tried to root the phone. Did you get it from AT&T? Maybe you could take it back and get it exchanged for another one since it got pooched while running Kies?
Click to expand...
Click to collapse
I got it from Walmart because AT&T was going to take two hours, lol. And, how would I go about doing that? I'm not a good liar, and I don't know how I pooched it lol
Wesley. said:
I got it from Walmart because AT&T was going to take two hours, lol. And, how would I go about doing that? I'm not a good liar, and I don't know how I pooched it lol
Click to expand...
Click to collapse
Well, if you take it to an AT&T or Walmart store, they may not care that you tripped the counter. If they send it in to Samsung for repair, they may not care either. However, there's always the chance that AT&T/Walmart/Samsung would allow repairing the phone at no charge.
audit13 said:
Well, if you take it to an AT&T or Walmart store, they may not care that you tripped the counter. If they send it in to Samsung for repair, they may not care either. However, there's always the chance that AT&T/Walmart/Samsung would allow repairing the phone at no charge.
Click to expand...
Click to collapse
Is there any way I could try flashing a rom?
Wesley. said:
Is there any way I could try flashing a rom?
Click to expand...
Click to collapse
You would need to install a custom recovery in order to flash a custom ROM. A custom recovery can be installed via Odin if you find the right file.
Do not flash any stock Samsung 4.3 ROM or a custom rom unless Knox has been removed.
audit13 said:
You would need to install a custom recovery in order to flash a custom ROM. A custom recovery can be installed via Odin if you find the right file.
Do not flash any stock Samsung 4.3 ROM or a custom rom unless Knox has been removed.
Click to expand...
Click to collapse
I have CWM Recovery, what can I do now? I am rooted, however Knox isn't disabled. Any way I can disable it? I'm unable to boot my phone up, when I try it says 'Firmware upgrade encountered an issue. Please select blah blah..', and I'm in the Download mode now.
Wesley. said:
I have CWM Recovery, what can I do now? I am rooted, however Knox isn't disabled. Any way I can disable it? I'm unable to boot my phone up, when I try it says 'Firmware upgrade encountered an issue. Please select blah blah..', and I'm in the Download mode now.
Click to expand...
Click to collapse
Are you running the latest version of CWM? If you can't boot into your OS, how do you know you are rooted?
Flashing another ROM will remove knox.
Copy a custom rom to a microSD card (do not unzip the ROM which is a single zip file), boot into recovery mode, wipe cache, wipe data, wipe Dalvik, and install the ROM from SDcard1.
I have the latest experimental Cyanfox on my i747m from here: http://cyanfox-rom.com/downloads/?folder=d2att/
audit13 said:
Are you running the latest version of CWM? If you can't boot into your OS, how do you know you are rooted?
Flashing another ROM will remove knox.
Copy a custom rom to a microSD card (do not unzip the ROM which is a single zip file), boot into recovery mode, wipe cache, wipe data, wipe Dalvik, and install the ROM from SDcard1.
I have the latest experimental Cyanfox on my i747m from here: http://cyanfox-rom.com/downloads/?folder=d2att/
Click to expand...
Click to collapse
I was able to before, however in Odin I was trying to flash something(a root file), and it said failed, so i rebooted and now i'm stuck. D:
Wesley. said:
I was able to before, however in Odin I was trying to flash something(a root file), and it said failed, so i rebooted and now i'm stuck. D:
Click to expand...
Click to collapse
When did you flash CWM? Is it 6.0.4.5? How did you flash it? Via Odin?
I can't boot into recovery, I get the firmware upgrade thing again. i have no idea what version it is, and yes via odin
Wesley. said:
I can't boot into recovery, I get the firmware upgrade thing again. i have no idea what version it is, and yes via odin
Click to expand...
Click to collapse
For recovery, are you holding the home button, volume up, and then pressing and holding power? You need to hold all 3 until you see some blue text appear on the screen, then let go of the power button.

WIFI Can't see any modem, after upgrade 4.3

hi im new in the forum. sorry by my english
please help me im very sad.
I make a upgrade in odin to 4.3 offical rom and my cellphone can't see any modem. the wifi is on, but is not appears any conexion.
I tried all things what i find in internet like:
*#0011#
data fatory reset.
cache reset.
and nothing. please helpme!!
Flash 4.3 with Odin again. Power the phone off, then reboot manually into download mode and flash the 4.3 firmware
serio22 said:
Flash 4.3 with Odin again. Power the phone off, then reboot manually into download mode and flash the 4.3 firmware
Click to expand...
Click to collapse
thank you i will try this.
help
serio22 said:
Flash 4.3 with Odin again. Power the phone off, then reboot manually into download mode and flash the 4.3 firmware
Click to expand...
Click to collapse
hi, i do what you tell me aboy , but its doing the same thing, do you have another sugestion?
thank you
alexfdz610 said:
hi, i do what you tell me aboy , but its doing the same thing, do you have another sugestion?
thank you
Click to expand...
Click to collapse
Does it actually scan for WiFi networks, or it just turns back off?

samsung A3 not starting not doing anything

hey i have a samsung a3 that a rolledback to 4.4.4 from 5.0.1 however scince odin restarted it it didnt do anything not showing any sings of
life not powering up not even shaking if i plug in my charger?
is this phone ready for the recycle bin or do i have to wait longer?
this forum is for a3/5/7 2017
edit: besides that can u enter download mode? did you try to downgrade your modem to?
nekos95 said:
this forum is for a3/5/7 2017
edit: besides that can u enter download mode? did you try to downgrade your modem to?
Click to expand...
Click to collapse
as i usually do i flash it on everything but it doesn't start it doesn't do anything adb doesn't register it too
Generaaleric said:
as i usually do i flash it on everything but it doesn't start it doesn't do anything adb doesn't register it too
Click to expand...
Click to collapse
try to flash the lastest firmware again not 4.4 also try different odin versions starting from 3.10.7 then try newer if it still doesnt boot
nekos95 said:
try to flash the lastest firmware again not 4.4 also try different odin versions starting from 3.10.7 then try newer if it still doesnt boot
Click to expand...
Click to collapse
cant system and phone are in-responsive have no idea if its crashed most likely is though it have zero control over it
you mean your pc is broken to?
nekos95 said:
you mean your pc is broken to?
Click to expand...
Click to collapse
no i mean my phones system

S9 crashes if it goes into locked screen [ROOTED]

Hey Community,
Im new here and got a big problem with my s9.
I rooted it today with magisk, just recovered my backup.
Then i noticed that always when the phone is looking to locked screen it just crash and i cant start it (only with Volume up + Bixby + Power Button and then there choose the reboot function)
Would be great if someone know the reason why this happens.
Regards
bump
Probably something to do with restoring your backup
No talk about lucky patcher on XDA as it is classed as Warez
*Detection* said:
Probably something to do with restoring your backup
No talk about lucky patcher on XDA as it is classed as Warez
Click to expand...
Click to collapse
If i Factory Reset with my rooted phone now, will there be issues ?
Regards
EaZy21 said:
If i Factory Reset with my rooted phone now, will there be issues ?
Regards
Click to expand...
Click to collapse
No, it should just return to stock
I Factory reseted now, root is gone but the problem is still there ...
it definitly came after i root the phone, someone have ideas ?
Regards
EaZy21 said:
I Factory reseted now, root is gone but the problem is still there ...
it definitly came after i root the phone, someone have ideas ?
Regards
Click to expand...
Click to collapse
Try flashing stock 100% with CSC instead, do not restore any backup
*Detection* said:
Try flashing stock 100% with CSC instead, do not restore any backup
Click to expand...
Click to collapse
You mean flashing stock firmware?
what you mean with CSC ?
Im now download firmware from sammobile and then i flash with odin ?
Regards
EaZy21 said:
You mean flashing stock firmware?
what you mean with CSC ?
Im now download firmware from sammobile and then i flash with odin ?
Regards
Click to expand...
Click to collapse
You rooted your phone without knowing how to flash stock back?
Download the stock firmware, extract it, add all 4 sections to ODIN 3.13.1, do not use HOME_CSC, use CSC instead, put phone in download mode, flash
*Detection* said:
You rooted your phone without knowing how to flash stock back?
Download the stock firmware, extract it, add all 4 sections to ODIN 3.13.1, do not use HOME_CSC, use CSC instead, put phone in download mode, flash
Click to expand...
Click to collapse
Thank you.
This slow download on sammobile sucks btw. ^^
Regards
So i rooted again, and the problem is there again ...
i dont know what could be the problem, in stock firmware the crash in locking screen isnt there.
Regards
EaZy21 said:
So i rooted again, and the problem is there again ...
i dont know what could be the problem, in stock firmware the crash in locking screen isnt there.
Regards
Click to expand...
Click to collapse
Have you found a Fix to this? What software did you use for rooting? Did you install a custom recovery?
For me this exact thing happens with TWRP and magisk. On the TWRP Thread jesec pointed out that rooting without flashing a custom kernel will most likely cause issues.
Was hoping you may have found a solution

Question TWRP touch issue

I see that TWRP users have experienced a touchscreen issue, so they need to use an OTG cable with wireless mouse. Does anyone know when will the touch issue be fixed?
NickDeveloper said:
I see that TWRP users have experienced a touchscreen issue, so they need to use an OTG cable with wireless mouse. Does anyone know when will the touch issue be fixed?
Click to expand...
Click to collapse
So, we don't know when will be fixed
NickDeveloper said:
I see that TWRP users have experienced a touchscreen issue, so they need to use an OTG cable with wireless mouse. Does anyone know when will the touch issue be fixed?
Click to expand...
Click to collapse
But you can use the OTG touch twrp
Arobase40 said:
I experimented this no touch TWRP but it is mostly buggy excluding the non touch issue there is a bigger issue which is that once installed you can't get out from it as it bootloops into this recovery mode. Flashing a stock recovery won't change anything.
You will have to totally restock your phone from scratch and then re root it and restore all your apps and data !!! ^^
I found out the twrp tree for A52 4G and was able to build a TWRP but obviously I can't test it.
I'm not able to build a twrp for A52S 5G for now as there are missing many kernel modules and other stuffs so I have to build them from kernel source code. So for now I'm working on the device and vendor config files...
Click to expand...
Click to collapse
But how can I fix my phone if I get a bootloop?
Arobase40 said:
You can't that is why I don't recommend you to use this no touch TWRP !
I was told to use a multidisabler but doesn't seem to work...
Click to expand...
Click to collapse
But it is only a soft brick, there is no need to change the motherboard. Would there be a way to reinstall stock firmware with Odin?
Arobase40 said:
I didn't say it will break your motherboard but if you want to waste your time in restocking your phone it's up to you.
Click to expand...
Click to collapse
Can I reinstall stock firmware with Odin? Will it work?
NickDeveloper said:
Can I reinstall stock firmware with Odin? Will it work?
Click to expand...
Click to collapse
Yes.
Arobase40 said:
As I said if you want to waste your time, YES you can reinstall stock firmware but of course you will lose your no touch twrp...
You will have to choose one or the other but not both...
Click to expand...
Click to collapse
Unfortunately, I have tried to reinstall stock firmware, but it failed. Looks like my bootloader became locked. Odin software showed "FAIL". There was a message that I could barely read, so that was the reason it failed to reinstall the firmware.
What should I do now?
Arobase40 said:
You can't that is why I don't recommend you to use this no touch TWRP !
I was told to use a multidisabler but doesn't seem to work...
Click to expand...
Click to collapse
So you got stuck in a bootloop after installing twrp. Have you tried just extracting the stock boot.img from firmware AP file and flashing it with odin? I really don't get it why you had to reinstall everything to stock. It's not necessary to reflash every partition if you only messed up one
Arm1nas said:
So you got stuck in a bootloop after installing twrp. Have you tried just extracting the stock boot.img from firmware AP file and flashing it with odin? I really don't get it why you had to reinstall everything to stock. It's not necessary to reflash every partition if you only messed up one
Click to expand...
Click to collapse
Nope, I did not make the backup of anything. Unfortunately, my bootloader is now locked and I cannot reinstall stock firmware. What now??
NickDeveloper said:
Nope, I did not make the backup of anything. Unfortunately, my bootloader is now locked and I cannot reinstall stock firmware. What now??
Click to expand...
Click to collapse
While the phone is completely off, press vol up and vol down buttons at the same time and then plug in the usb cable to the computer. I had that happen too, when the device fails to boot it automatically puts you into download mode and it says that the OEM LOCK is on. You just have to reboot to download mode manually.
Arm1nas said:
While the phone is completely off, press vol up and vol down buttons at the same time and then plug in the usb cable to the computer. I had that happen too, when the device fails to boot it automatically puts you into download mode and it says that the OEM LOCK is on. You just have to reboot to download mode manually.
Click to expand...
Click to collapse
But how can I reinstall stock firmware when the OEM is locked? I tried to reinstall with all required binaries, including HOME_CSC and it showed "FAIL".
NickDeveloper said:
But how can I reinstall stock firmware when the OEM is locked? I tried to reinstall with all required binaries, including HOME_CSC and it showed "FAIL".
Click to expand...
Click to collapse
You don't need to unlock bootloader to flash stock fw with Odin.
Your problem is most likely related to something else.
Where did you download your fw?
Have you tried different cables?
What Odin version are you trying?
ShaDisNX255 said:
You don't need to unlock bootloader to flash stock fw with Odin.
Your problem is most likely related to something else.
Where did you download your fw?
Have you tried different cables?
What Odin version are you trying?
Click to expand...
Click to collapse
I don't understand why would it be possible to flash stock firmware with locked bootloader, I thought that locked bootloader won't allow the OS to be reinstalled.
NickDeveloper said:
I don't understand why would it be possible to flash stock firmware with locked bootloader, I thought that locked bootloader won't allow the OS to be reinstalled.
Click to expand...
Click to collapse
A Locked bootloader will prevent you from installing any custom things, like recovery or custom roms. It will allow you to install stock firmware via odin. Use Odin 3.14 to install firmware downloaded from here. Use the AP, Bl, Cp, and CSC_OXM files. That will get you started from scratch, all previous data and stuff will be deleted.

Categories

Resources