Pls help me updating my 5t to oreo.i am currently on version 4.7.6 with twrp recovery nd super su root.
After updating to Oreo I again want to root my phone
Pls share links to download compatibile ROM, recovery nd super su.zip
But you already have the OREO OOS ROM installed, why not use it? Flash the Oreo recovery from codeworkx through fastboot, make sure to follow the instructions so it sticks and then flash Magisk or any root solution of your choice. It's not hard if you do some searching.
Check in ROMs' threads and come back what your interested ROM is.
What I did was flash the ota to update me to Oreo. Then had to reflash Magisk and kernel.
jcroy2828 said:
What I did was flash the ota to update me to Oreo. Then had to reflash Magisk and kernel.
Click to expand...
Click to collapse
Kernel?
jcroy2828 said:
What I did was flash the ota to update me to Oreo. Then had to reflash Magisk and kernel.
Click to expand...
Click to collapse
Pls give me link to download magisk nd what does kernel mean?
mannulko said:
Kernel?
Click to expand...
Click to collapse
Il check when I get home. I just used Magisk 15.3 from the Magisk xda thread
jcroy2828 said:
Il check when I get home. I just used Magisk 15.3 from the Magisk xda thread
Click to expand...
Click to collapse
I mean pls tell me step by step what should I do.currently I am on 4.7.6 wth twrp recovery nd rooted.i want to update my phone to Oreo nd root again
mannulko said:
I mean pls tell me step by step what should I do.currently I am on 4.7.6 wth twrp recovery nd rooted.i want to update my phone to Oreo nd root again
Click to expand...
Click to collapse
If you have already installed a custom recovery and rooted your phone then you should be able to follow these instructions.
I can personally confirm that I was able to install the beta versions of Oreo and the final version of Oreo without any issues.
Here's what I did:
1. Download full .zip
2. Download Blu_Spark TWRP or Codeworkx TWRP (I personally used Blu_Spark but both should work).
3. Download Magisk 15.3 (I havent used SuperSu in a while so I can't confirm how well it works on Oreo but in my opinion Magisk is a better root method and it works in this version of android).
4. Make sure you have both ROM and Magisk on a easy to find place on your phone.
5. Boot to fastboot and fastboot flash the recovery you just downloaded.
6. Boot to recovery, wipe dalvik and cache and then install the ROM.
7. Once the installation is done, boot to system and wait till the system to finish updating. Once there you can go to settings > phone status and it should read (android version = 8.0.0 and OxygenOS version = 5.0.2, congrats, you're on the latest OxygenOS version for this phone).
8. Reboot to fastboot, and fastboot flash the custom recovery again.
9. Boot to recovery, wipe dalvik and cache again, and flash Magisk, wipe dalvik and cache once more and reboot to system.
10. Once the phone is booted up, you should be rooted with Magisk and on the latest OS.
9. Boot to recovery, wipe dalvik and cache again, and flash Magisk, wipe dalvik and cache once more and reboot to system.
10. Once the phone is booted up, you should be rooted with Magisk and on the latest OS.
NOTE: Since this is a big version update from Nougat, it's always recommended to do a clean flash although not necessary in most cases unless there are issues like big battery drain or when apps or the OS are not working properly. Also, if you are coming from a custom ROM and not the official OxygenOS, then you should definitely do a clean installation (even if said custom ROM is based on OxygenOS).
HueleSnaiL said:
If you have already installed a custom recovery and rooted your phone then you should be able to follow these instructions.
I can personally confirm that I was able to install the beta versions of Oreo and the final version of Oreo without any issues.
Here's what I did:
1. Download full .zip
2. Download Blu_Spark TWRP or Codeworkx TWRP (I personally used Blu_Spark but both should work).
3. Download Magisk 15.3 (I havent used SuperSu in a while so I can't confirm how well it works on Oreo but in my opinion Magisk is a better root method and it works in this version of android).
4. Make sure you have both ROM and Magisk on a easy to find place on your phone.
5. Boot to fastboot and fastboot flash the recovery you just downloaded.
6. Boot to recovery, wipe dalvik and cache and then install the ROM.
7. Once the installation is done, boot to system and wait till the system to finish updating. Once there you can go to settings > phone status and it should read (android version = 8.0.0 and OxygenOS version = 5.0.2, congrats, you're on the latest OxygenOS version for this phone).
8. Reboot to fastboot, and fastboot flash the custom recovery again.
9. Boot to recovery, wipe dalvik and cache again, and flash Magisk, wipe dalvik and cache once more and reboot to system.
10. Once the phone is booted up, you should be rooted with Magisk and on the latest OS.
9. Boot to recovery, wipe dalvik and cache again, and flash Magisk, wipe dalvik and cache once more and reboot to system.
10. Once the phone is booted up, you should be rooted with Magisk and on the latest OS.
NOTE: Since this is a big version update from Nougat, it's always recommended to do a clean flash although not necessary in most cases unless there are issues like big battery drain or when apps or the OS are not working properly. Also, if you are coming from a custom ROM and not the official OxygenOS, then you should definitely do a clean installation (even if said custom ROM is based on OxygenOS).
Click to expand...
Click to collapse
What is clean flash?
HueleSnaiL said:
If you have already installed a custom recovery and rooted your phone then you should be able to follow these instructions.
I can personally confirm that I was able to install the beta versions of Oreo and the final version of Oreo without any issues.
Here's what I did:
1. Download full .zip
2. Download Blu_Spark TWRP or Codeworkx TWRP (I personally used Blu_Spark but both should work).
3. Download Magisk 15.3 (I havent used SuperSu in a while so I can't confirm how well it works on Oreo but in my opinion Magisk is a better root method and it works in this version of android).
4. Make sure you have both ROM and Magisk on a easy to find place on your phone.
5. Boot to fastboot and fastboot flash the recovery you just downloaded.
6. Boot to recovery, wipe dalvik and cache and then install the ROM.
7. Once the installation is done, boot to system and wait till the system to finish updating. Once there you can go to settings > phone status and it should read (android version = 8.0.0 and OxygenOS version = 5.0.2, congrats, you're on the latest OxygenOS version for this phone).
8. Reboot to fastboot, and fastboot flash the custom recovery again.
9. Boot to recovery, wipe dalvik and cache again, and flash Magisk, wipe dalvik and cache once more and reboot to system.
10. Once the phone is booted up, you should be rooted with Magisk and on the latest OS.
9. Boot to recovery, wipe dalvik and cache again, and flash Magisk, wipe dalvik and cache once more and reboot to system.
10. Once the phone is booted up, you should be rooted with Magisk and on the latest OS.
NOTE: Since this is a big version update from Nougat, it's always recommended to do a clean flash although not necessary in most cases unless there are issues like big battery drain or when apps or the OS are not working properly. Also, if you are coming from a custom ROM and not the official OxygenOS, then you should definitely do a clean installation (even if said custom ROM is based on OxygenOS).
Click to expand...
Click to collapse
Will the official TWRP work with no problem?
I'm already on 4.7.6, offical twrp-3.2.1-1-dumpling and magisk 15.3, and don't really want to flash another recovery.
HueleSnaiL said:
If you have already installed a custom recovery and rooted your phone then you should be able to follow these instructions.
I can personally confirm that I was able to install the beta versions of Oreo and the final version of Oreo without any issues.
Here's what I did:
1. Download full .zip
2. Download Blu_Spark TWRP or Codeworkx TWRP (I personally used Blu_Spark but both should work).
3. Download Magisk 15.3 (I havent used SuperSu in a while so I can't confirm how well it works on Oreo but in my opinion Magisk is a better root method and it works in this version of android).
4. Make sure you have both ROM and Magisk on a easy to find place on your phone.
5. Boot to fastboot and fastboot flash the recovery you just downloaded.
6. Boot to recovery, wipe dalvik and cache and then install the ROM.
7. Once the installation is done, boot to system and wait till the system to finish updating. Once there you can go to settings > phone status and it should read (android version = 8.0.0 and OxygenOS version = 5.0.2, congrats, you're on the latest OxygenOS version for this phone).
8. Reboot to fastboot, and fastboot flash the custom recovery again.
9. Boot to recovery, wipe dalvik and cache again, and flash Magisk, wipe dalvik and cache once more and reboot to system.
10. Once the phone is booted up, you should be rooted with Magisk and on the latest OS.
9. Boot to recovery, wipe dalvik and cache again, and flash Magisk, wipe dalvik and cache once more and reboot to system.
10. Once the phone is booted up, you should be rooted with Magisk and on the latest OS.
NOTE: Since this is a big version update from Nougat, it's always recommended to do a clean flash although not necessary in most cases unless there are issues like big battery drain or when apps or the OS are not working properly. Also, if you are coming from a custom ROM and not the official OxygenOS, then you should definitely do a clean installation (even if said custom ROM is based on OxygenOS).
Click to expand...
Click to collapse
Thanks a lot I have updated nd rooted but now 5.0.3 is out ? how to go from 5.0.2 to 5.0.3 nd root
I also wanna format my 5t
mannulko said:
What is clean flash?
Click to expand...
Click to collapse
Wiping data and system partition which means you're wiping the entire OS and installing the new version on a clean partition. Think of it as formatting a hard drive and installing an OS instead of just upgrading your existing OS.
You obviously lose all apps installed,and it would be like when you first turned on your phone, however as long as you don't wipe internal storage, all your photos,music,etc are not wiped so you can use apps like titanium backup to restore all apps and data .
This method is recommended when switching from different custom ROM's and when upgrading from major version updates, like for example, going to Android 8 from Andorid 7.
---------- Post added at 07:13 PM ---------- Previous post was at 07:09 PM ----------
rockuman_ex said:
Will the official TWRP work with no problem?
I'm already on 4.7.6, offical twrp-3.2.1-1-dumpling and magisk 15.3, and don't really want to flash another recovery.
Click to expand...
Click to collapse
I used that same version of TWRP back during the Oreo beta and it didn't work so I had to switch to blu_spark.
HueleSnaiL said:
Wiping data and system partition which means you're wiping the entire OS and installing the new version on a clean partition. Think of it as formatting a hard drive and installing an OS instead of just upgrading your existing OS.
You obviously lose all apps installed,and it would be like when you first turned on your phone, however as long as you don't wipe internal storage, all your photos,music,etc are not wiped so you can use apps like titanium backup to restore all apps and data .
This method is recommended when switching from different custom ROM's and when upgrading from major version updates, like for example, going to Android 8 from Andorid 7.
---------- Post added at 07:13 PM ---------- Previous post was at 07:09 PM ----------
I used that same version of TWRP back during the Oreo beta and it didn't work so I had to switch to blu_spark.
Click to expand...
Click to collapse
So i took the jump and flashed blu spark and the 5.0.3 full rom.
Yes i lost the recovery to stock, but that's ok. Just want to get OTA in the future and I don't need root at the moment.
So this is what i did (coming from 4.7.6, official twrp, magisk 15.3)
Make sure you have all the necessary files (eg. blu spark img file and the full ota file on your phone
boot the fastboot and "fastboot flash recovery twrp-3.2.1-x_blu_spark_v8.68-op5_op5t.img"
On the phone, choose and go to recovery
(now i'm on blu spark) Wipe Cache and Dalvik cache (i did this 2 times just to make sure)
Choose install and select the full ota rom file
Let it run and install the rom (took less than 5 mins)
Wipe Cache and Dalvik cache again (again, i wiped 2 times just to make sure)
Reboot
Make take a while (less than 10mins) for android to start and do the upgrade etc
Done
So far so good, i don't see any immediate problem. I will play a bit more and will post if I encounter any problem :good:
I have updated to 5.0.3 through system update app. where it downloaded full ota file and installed.Now I want to install twrp nd root my phone so pls confirm my steps
1 boot into fastboot mode and flash bluespark recovery
2 wipe delvik/cache from twrp recovery
3 flash magisk zip
4 again wipe delvik cache
5 reboot
are above steps correct?
Hello,
i have latest (8.69) twrp blue_spark and i try to flash latest oxygen os
1)Oreo 5.0.3: OnePlus5TOxygen_43_OTA_029_all_1802022353_460d.zip
2)magisk 15.3
3)wipe davlik/cache
reboot system and i get stucked at bootanimation of OxygenOS.
Any help guys please ?
Thanks!
Redownloaded Magisk 15.3 and ok
BrollyG4 said:
Hello,
i have latest (8.69) twrp blue_spark and i try to flash latest oxygen os
1)Oreo 5.0.3: OnePlus5TOxygen_43_OTA_029_all_1802022353_460d.zip
2)magisk 15.3
3)wipe davlik/cache
reboot system and i get stucked at bootanimation of OxygenOS.
Any help guys please ?
Thanks!
Redownloaded Magisk 15.3 and ok
Click to expand...
Click to collapse
I'm having the same problem, I think it's version (8.69) twrp blue_spark. I'll try with version 8.68
Related
I was using 4.0.0 stock with twrp and root. Tried to install the 4.0.2 update but every boot just took me back to recovery. Tried wiping clean, no change. Tried installing stock recovery v2.0, recovery would hang. Tried using new twrp 3.0.3 and I could get back in, but any ROM, stock or not I installed, would not stick.. Even twrp would warn me "no os installed. reboot anyway?" even when I had just installed a ROM. So in the end I flashed OOS 3.2.8 with twrp and then flashed stock recovery. At this point I'm pretty much at factory stock at v3.2.8 with stock recovery v1.0. Now I'm trying to update to 4.0.2 via OTA and for the 3rd time already I have received a installation failed message and rebooted to system. The first time I thought it was because I disconnected VPN after starting the download, so I downloaded a second and a third time. I don't want to resort to sideloading again because I fear I might get the same no OS installed problem I got when I tried to install 4.0.2 in the first place. Does anyone have any insight on what is wrong?
Steps:
1. Install latest Official or Modified TWRP ( 3.0.3/ 3.0.3 version 14 by eng.stk)
2. Enter into recovery. Connect phone to PC and copy downloaded ROM file.
3. Wipe everything in the recovery- Data, System, cache and Dalvic. It will erase everything.
4. Flash ROM zip after completing, don't reboot phone. Reboot to recovery again, and then reboot phone.
If u reboot phone directly after flashing ROM, u will loose TWRP.
Even twrp would warn me "no os installed. reboot anyway?" even when I had just installed a ROM.
Click to expand...
Click to collapse
This is pretty normal for nougat OOS. I've faced it for all 3 ROMs i flashed. Don't worry, your ROM was flashed successfully. You can mount and check the /system partition, you can see your ROM files there.
So here's what worked for me. (considering you are on ext4 /data)
1. Flash latest official twrp recovert ext4 version or use the file system swapper zip if it doesn't decrypt your data in recovery. TWRP has some issues as of now and mounts f2fs as default, so you just need to flash the file system swapper zip in order to swap it to ext4 by default.
2. Wipe /system /cache and dalvik cache.
3. Flash full 4.0.2 ROM zip, should be 1.4 GB in size.
4. Flash TWRP image again just in case.
5. Reboot to recovery, not to system.
6. Flash stable 2.79 Super Su and you are good to go.
Thanks for the tip, however I don't mind losing twrp, I only want to get stock unaltered update and this procedure does not help in this
IonAphis said:
Thanks for the tip, however I don't mind losing twrp, I only want to get stock unaltered update and this procedure does not help in this
Click to expand...
Click to collapse
Have you tried this guide: https://forum.xda-developers.com/oneplus-3/how-to/guide-flashing-oos-v4-0-1-custom-rom-t3537757
P.S. I think you did, but I'm just asking.
Thanks for the tip, but I fixed it. Ended up flashing v3.2.8 via twrp and installed OTA to 4.0.1 via sideload. Recovery would not boot unless first fully booted into the system. After that sideloaded 4.0.2 via OTA and now back to complete stock.
Thanks guys!
Hello,
I have recently purchased my OP5T transitioning from 3 years of iOS and this is one of the best choice I've made when using phones.
I have managed to root my phone on OS 4.7.6 with SuperSU and install TWRP recovery. However, with the new Oreo update out, I want to upgrade my OS and still have root. Reading many tutorials on the OP forums and comments in the XDA forums, I was very confused mainly regarding the TWRP and it's compatibility on Oreo as well as when to flash it (before or after flashing oreo ota??)
I already have the Oreo 5.0.1 file installed on my PC.
Sorry for another pointless thread, but I'm at a loss here.
Thanks.
There are different flavors of TWRP for the 1+5t and some versions of them were unable to decrypt and mount /data partition so that's maybe the issues you read about.
However, I can personally confirm that I was able to install the beta versions of Oreo and the final version of Oreo without any issues.
Here's what I did:
1. Download full .zip
2. Download Blu_Spark TWRP
3. Download Magisk 15.3
4. Make sure you have both ROM and Magisk on a easy to find place on your phone.
5. Boot to fastboot and fastboot flash the recovery you just downloaded.
6. Boot to recovery, wipe dalvik and cache and then install the ROM.
7. Once the installation is done, boot to system and wait till the system to finish updating. Once there you can go to settings > phone status and it should read (android version = 8.0.0 and OxygenOS version = 5.0.2).
8. Reboot to fastboot, and fastboot flash the custom recovery again.
9. Boot to recovery, wipe dalvik and cache again, and flash Magisk, wipe dalvik and cache once more and reboot to system.
10. Once the phone is booted up, you should be rooted with Magisk and on the latest OS.
Did I hear SuperSU is broken in the Official Oreo OTA? I haven't made the jump to Magisk and would rather stick with SuperSU for root.
crakerjac said:
Did I hear SuperSU is broken in the Official Oreo OTA? I haven't made the jump to Magisk and would rather stick with SuperSU for root.
Click to expand...
Click to collapse
Magsik is way better. 95% of people use it. It helps pass safety net which is requires for apps like pokemon go, bank apps, snapchat etc. So if u want to use those apps while rooted. Stick with magisk.
Yeah all the issues with twrp after at the beginning of this phones life. If u stick with oos and don't try custom roms u will have 0 issues.
I used SuperSu for 3-4 years and was too stubborn to try Magisk for quite a while....always saw guys talking about it this module and that module and didnt understand the hype. Then about 4 months ago I gave it a shot and in an instance totally understood the hype. I my opinion it is superior to SuperSu in everyway.
HueleSnaiL said:
There are different flavors of TWRP for the 1+5t and some versions of them were unable to decrypt and mount /data partition so that's maybe the issues you read about.
However, I can personally confirm that I was able to install the beta versions of Oreo and the final version of Oreo without any issues.
Here's what I did:
1. Download full .zip
2. Download Blu_Spark TWRP
3. Download Magisk 15.3
4. Make sure you have both ROM and Magisk on a easy to find place on your phone.
5. Boot to fastboot and fastboot flash the recovery you just downloaded.
6. Boot to recovery, wipe dalvik and cache and then install the ROM.
7. Once the installation is done, boot to system and wait till the system to finish updating. Once there you can go to settings > phone status and it should read (android version = 8.0.0 and OxygenOS version = 5.0.2).
8. Reboot to fastboot, and fastboot flash the custom recovery again.
9. Boot to recovery, wipe dalvik and cache again, and flash Magisk, wipe dalvik and cache once more and reboot to system.
10. Once the phone is booted up, you should be rooted with Magisk and on the latest OS.
Click to expand...
Click to collapse
Following your steps above, will the latest official twrp work?
Dazed No More said:
I used SuperSu for 3-4 years and was too stubborn to try Magisk for quite a while....always saw guys talking about it this module and that module and didnt understand the hype. Then about 4 months ago I gave it a shot and in an instance totally understood the hype. I my opinion it is superior to SuperSu in everyway.
Click to expand...
Click to collapse
lmao same with me, i was so stubborn to try Magisk and always used SU, then i figured it out and I love magisk and would not go back to SU at this time.
I guess I just don't understand Magisk then... I just want to flash a zip and have access to root and Xposed.
I think most confusion from magisk come from modules
I thought magisk was a framework like closed by the way people were talking about it
Finally made the jump
Magisk is root on its own like supersu
But you have the added choice to install systemless modules
And you can add xposed the same way as supersu, its the same procedure
I unlocked the boot loader & installed TWRP
I tried to install official Lienage 7.1.2 after flashing & wipe cache then restarting screen went black with long vibration & blue notification led
the other 8.1 roms the TWRP Stopes when flashing after saying flashing img
may anyone tell me the problem
Arafa1994 said:
I unlocked the boot loader & installed TWRP
I tried to install official Lienage 7.1.2 after flashing & wipe cache then restarting screen went black with long vibration & blue notification led
the other 8.1 roms the TWRP Stopes when flashing after saying flashing img
may anyone tell me the problem
Click to expand...
Click to collapse
Flash twrp via fastboot.
Boot to twrp via
Fastboot boot twrp.img
Replace "twrp" with the file name of your twrp.
Once twrp booted, go into reboot menu. And reboot to recovery again. That will make your phone boot again into twrp, but this time with more rights.
Go into wipe. Advanced wipe
Change data partition file system to ext4.
Reboot again into twrp via the reboot menu ,just like before.
Now go into wipe again, and format system,data,dalvik and cache.
Flash your rom.
Flash gapps (if not otherwise stated by ROM thread)
Flash Magisk (optional, if you want root)
Wipe dalvik and cache.
Reboot. And enjoy
Sent from my Lenovo P2a42 using XDA Labs
sm00th4f3 said:
Flash twrp via fastboot.
Boot to twrp via
Fastboot boot twrp.img
Replace "twrp" with the file name of your twrp.
Once twrp booted, go into reboot menu. And reboot to recovery again. That will make your phone boot again into twrp, but this time with more rights.
Go into wipe. Advanced wipe
Change data partition file system to ext4.
Reboot again into twrp via the reboot menu ,just like before.
Now go into wipe again, and format system,data,dalvik and cache.
Flash your rom.
Flash gapps (if not otherwise stated by ROM thread)
Flash Magisk (optional, if you want root)
Wipe dalvik and cache.
Reboot. And enjoy
Click to expand...
Click to collapse
Thx alot
But I have one more question
Should the bootloader to be marshmallow or nougat?
Arafa1994 said:
Thx alot
But I have one more question
Should the bootloader to be marshmallow or nougat?
Click to expand...
Click to collapse
What do you mean The bootloader is the bootloader.
Danoz88 said:
What do you mean The bootloader is the bootloader.
Click to expand...
Click to collapse
In my moto Z Play some roms needs Nougat bootloader like xperince
So Iam asking If some roms needs nougat bootloader in Lenovo P2
Arafa1994 said:
So Iam asking If some roms needs nougat bootloader in Lenovo P2
Click to expand...
Click to collapse
We only have one bootloader.
We have different firmwares though like nougat and marshmallow.
You will need Firmwares S244 for nougat ROMs.
That firmware must be flashed through ota. Stockrom-feature. Simply using twrp does not count as doing otas.
Basic starter things: Have Firmware S244 or S251 installed through stock ota feature.
Then use my earlier stated instructions.
Thx alot it worked & no problems
I rooted my oneplus 3 with twrp and superSU. Now I want to install the latest update of oxygenOS and want to root with magisk. What should I do?
tonmoysust said:
I rooted my oneplus 3 with twrp and superSU. Now I want to install the latest update of oxygenOS and want to root with magisk. What should I do?
Click to expand...
Click to collapse
I presume you are on OOS. Download and flash full zip of OOS (not OTA), flash TWRP (latest) and flash Magisk in that order. Reboot after all flash is complete.
To be on the safer side, wipe system, data (excluding storage), Dalvic and cache and reboot into recovery before flashing OOS.
tnsmani said:
I presume you are on OOS. Download and flash full zip of OOS (not OTA), flash TWRP (latest) and flash Magisk in that order. Reboot after all flash is complete.
To be on the safer side, wipe system, data (excluding storage), Dalvic and cache and reboot into recovery before flashing OOS.
Click to expand...
Click to collapse
Can you give me any particular guide link?
tonmoysust said:
Can you give me any particular guide link?
Click to expand...
Click to collapse
Hi its quiet easy.
U have TWRP recivery.
So first download OOS full zip. Yhe link you can find in oneplus website or forum.
Then download latest magisk from official site .( It is universal ,it is not device specific. )
Back up your data.
Go to recovery ,do a nandroid backup( optional but recommended)
Then wipe cache,dalvic,system,data( all data gone)
Dont format sd card. ( Files in internal memory preserved,but still better to back up)
Then install the OOS zip
After that install magisk zip
Reboot to recovery( to preserve the TWRP,some times it gets changed to stock)
Reboot system.
Check for magisk manager
If not download from magisk forum. Check root.
you are done.
This is all According to my knowledge. Please feel free to correct me.
Usefull links ( i hope i can share links no issue in that !??)
https://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
https://forum.xda-developers.com/oneplus-3/how-to/oxygenos-5-0-7-ota-oneplus-3-3t-t3872820
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
How can I ota update rooted OOS with twrp recovery?
Darkweb_182 said:
How can I ota update rooted OOS with twrp recovery?
Click to expand...
Click to collapse
Official TWRP will not be able to update with the OTA update, only with the full ROM zip. There seems to be some other recoveries capable of that but since I don't have any experience with them, I refrain from naming them.
tnsmani said:
Official TWRP will not be able to update with the OTA update, only with the full ROM zip. There seems to be some other recoveries capable of that but since I don't have any experience with them, I refrain from naming them.
Click to expand...
Click to collapse
So how can I update oos while keeping the root access and not losing twrp recovery?
Darkweb_182 said:
So how can I update oos while keeping the root access and not losing twrp recovery?
Click to expand...
Click to collapse
Assuming that you are on 9.0.2 and want to update to 9.0.3, you wipe system, caches and data (excluding internal storage) and flash 9.0.3 full zip. Then boot back into recovery (without booting into system). You should boot into TWRP. If you do, flash Magisk and boot into system. If stock recovery over writes TWRP, flash TWRP image in bootloader (fastboot) and then Magisk and boot into system.
If you are on Oreo and want OOS 9, it is slightly more complicated. You will have to format data (take a backup of your files and transfer to PC/Laptop) and then boot back into recovery and then flash the ROM and do the steps above. This is because of encryption issues.
tnsmani said:
Assuming that you are on 9.0.2 and want to update to 9.0.3, you wipe system, caches and data (excluding internal storage) and flash 9.0.3 full zip. Then boot back into recovery (without booting into system). You should boot into TWRP. If you do, flash Magisk and boot into system. If stock recovery over writes TWRP, flash TWRP image in bootloader (fastboot) and then Magisk and boot into system.
If you are on Oreo and want OOS 9, it is slightly more complicated. You will have to format data (take a backup of your files and transfer to PC/Laptop) and then flash TWRP in bootloader, boot into it and then flash the ROM and do the steps above. This is because of encryption issues.
Click to expand...
Click to collapse
Yes I'm on 9.0.2 and want to update to 9.0.3
Is there any other way to do it without losing all the data?
Darkweb_182 said:
Yes I'm on 9.0.2 and want to update to 9.0.3
Is there any other way to do it without losing all the data?
Click to expand...
Click to collapse
Beware that there are some reports of the requirement of formatting again when updating from 9.0.2 to 9.0.3, though I did not face it. A backup is a must (on PC/Laptop, not on the phone itself).
I don't know of any other 'safe' way of doing it without data loss (assuming that by data, you mean internal storage).
How to update to 9.0.3
Darkweb_182 said:
How can I ota update rooted OOS with twrp recovery?
Click to expand...
Click to collapse
You cant update with OTA updates, you need the full rom.
I dont know how you updated to (8.0 to 9.0 the first time),
i unrooted and reset my prone while still on 8.0
and then i updated to 9.0 with official recovery after that i installed twrp and rooted with magisk.
If you dit anything different you might run into problems.
1. Download and update to the latest magisk in TWRP. (If you already have it installed skip this, but still download it to a folder on your phone).
2. Download the full rom to your phone, full rom here:
https://forum.xda-developers.com/oneplus-3/how-to/rom-oxygen-os-9-0-3-android-pie-oneplus-t3937636.
3. Install the rom with twrp, no need to wipe anything.
4. Right after install the latest version of magisk.
5. Reboot your phone to system.
6. Wait until phone starts (it might take up to 7/10 minutes).
7. Done
jeffrey268 said:
You cant update with OTA updates, you need the full rom.
I dont know how you updated to (8.0 to 9.0 the first time),
i unrooted and reset my prone while still on 8.0
and then i updated to 9.0 with official recovery after that i installed twrp and rooted with magisk.
If you dit anything different you might run into problems.
1. Download and update to the latest magisk in TWRP. (If you already have it installed skip this, but still download it to a folder on your phone).
2. Download the full rom to your phone, full rom here:
https://forum.xda-developers.com/oneplus-3/how-to/rom-oxygen-os-9-0-3-android-pie-oneplus-t3937636.
3. Install the rom with twrp, no need to wipe anything.
4. Right after install the latest version of magisk.
5. Reboot your phone to system.
6. Wait until phone starts (it might take up to 7/10 minutes).
7. Done
Click to expand...
Click to collapse
I switched from custom rom to oos 9.0.2
So basically just dirty flash oos 9.0.3 from twrp?
Darkweb_182 said:
I switched from custom rom to oos 9.0.2
So basically just dirty flash oos 9.0.3 from twrp?
Click to expand...
Click to collapse
Yes, but have a backup.