Hi,
I'm a newbie to this, but i tired following a few recommended stuff off this thread and
still nothing please help.
Got a sph-l710 that wont turn on,
i tried a few debricking images one got it to vibrate with this on screen
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS..
COPY FROM T-FLASH..
BOOT RECOVERY..
WRITE 159488 sectors..
FLASH WRITE FAILURE
ODIN MODE
PRODUCT NAME: SPH-L710
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit:0
BOOTLOADER AP SWAEV: 2
then when i run it through odin
it reads ODIN: flash read failure in red
Please help
Hi guys,
I was trying to find out how to restore my phone because it's dead after receiving and installing the last firmware (Netherland PHN 4.4.2 stock ROM-there was no Custom ROM) by OTA. It was working for few days but after that my phone began restarting and finally it stopped work at all. I wasnt able to turn in on, charge it or simply connect to pc (PC didnt recognized driver - qhsusb_dload) there was no respond so it was completely dead.
I found some solution with debrick image here on forum, but when i putted debrick.img (found some for I9195 android 4.4.2 on web) into sd card via win32diskmanager and inserted it into my phone i was able to get some respond by a phone.
Withou debrick image on sd cart i can't turn my phone on at all but with inserted debrick image i have a chance to turn it on but with some kind of boot loop.
Boot loop:
BOOT RECOVERY MODE (Green row)
CHECK BOOT PARTITIONS.
COPY FROM T-FLASH.
BOOT RECOVERY..
WRITE 139008 sectors.
REBOOT
And it repeats all the time.
With SD Card PC can recognised samsung drivers for my phone but odin can't connect.
I dont know what i did once time but i get another message when odin was able to recognise it
BOOT RECOVERY MODE (Green row)
CHECK BOOT PARTITIONS.
COPY FROM T-FLASH.
BOOT RECOVERY..
WRITE 139008 sectors.
FLASH WRITE FAILURE (Red row)
ddi: mmc_read failed
ODIN MODE (Red row)
PRODUCT NAME: GT-I9195
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
BOOTLOADER RP SWREV: 2
WRITE PROTECTION: Enable
But i'm not able to get into this anymore.
Last status is repetitive first bootloop and i cant get further.
I dont know what to do, to repair my phone or if its completely dead (mean eMMC fail).
Can someone help me with this issue or know some solution
Thanks in advance
hello guy's, my samsung today work's fine and from one hour not work at all - dead, i try to turn on no lucky, enter recovery no lucky, enter download mode not lucky
i found on forum about debrick.img and put on 16GB card, and phone vibrate and turn on but stuck like on the pictures mmc read failed, any sugestion, all the best
http://postimg.org/image/ar0zp4olp/
http://postimg.org/image/h3g4yyrnx/
gigidel said:
hello guy's, my samsung today work's fine and from one hour not work at all - dead, i try to turn on no lucky, enter recovery no lucky, enter download mode not lucky
i found on forum about debrick.img and put on 16GB card, and phone vibrate and turn on but stuck like on the pictures mmc read failed, any sugestion, all the best
http://postimg.org/image/ar0zp4olp/
http://postimg.org/image/h3g4yyrnx/
Click to expand...
Click to collapse
Sounds like the emmc memory is dead. Try to use these debrick images that I had taken from my i9195 some time ago. Extract first. https://drive.google.com/file/d/0B_vlSjY0nNrkX001ZUs4ZUF6dXc/view?usp=sharing
https://drive.google.com/file/d/0B_vlSjY0nNrkSFRVUERoTkF5cnM/view?usp=sharing
thanks a lot Mountains788, i try this two debrick.img, but no lucky, still the same mmc read failed
gigidel said:
thanks a lot Mountains788, i try this two debrick.img, but no lucky, still the same mmc read failed
Click to expand...
Click to collapse
I had the same issue, 2days ago (also so an Galaxy S4 mini).
I solved it by holding the 'volume down + home button' while connecting/disconnecting the phone to my/from laptop.
I have the same problem
When i put the sdcard with debrick image in my phone, It says:
BOOT RECOVERY MODE
CHECK BOOT PARTITONS..
COPY FROM T-FLASH..
BOOT RECOVERY..
WRITE 139008 sectors..
FLASH WRITE FAILURE
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-I9190
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
BOOTLOADER RP SWREV: 2
WRITE PROTECTION: Enable
And when i connect it to pc to flash by odin, it says "There is no pit partition"
When i put the pit file in odin, it says the same
What should i do?
Did you get it to work? I have the exact same problem with the same phone (GT-I9190) !!!!
My sister's S4 mini suddenly died, I cannot open the smartphone nor go on Recovery or download mode.
I used a debrick.img found here on xda put on a externaSD and manage to enter the download mode, then i try to flash a stock rom but it got stuck during the process (i leave odin running for hours without any success).
After that, when i retry the process this is what i got on screen:
Code:
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS. .
COPY FROM T-FLASH. .
WRITE 139008 sectors. .
FLASH WRITE FAILURE
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-I9195
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
BOOTLOADER AP SWREV: 2
CSB-CONFIG-SLB: 0x30
WRITE PROTECTION: ENABLE
I try to flash different .pit file found here on xda for the i9195 but if i try to flash (using Odin 3.13 or even odin 1.85) it says
Re-Partition operation failed or There is no PIT partition.
Any other idea i can try?
Maybe another .pit file for i9195 and a firmware that work with it?
Thanks to everyone
Goku_ssj3 said:
My sister's S4 mini suddenly died, I cannot open the smartphone nor go on Recovery or download mode.
I used a debrick.img found here on xda put on a externaSD and manage to enter the download mode, then i try to flash a stock rom but it got stuck during the process (i leave odin running for hours without any success).
After that, when i retry the process this is what i got on screen:
I try to flash different .pit file found here on xda for the i9195 but if i try to flash (using Odin 3.13 or even odin 1.85) it says
Re-Partition operation failed or There is no PIT partition.
Any other idea i can try?
Maybe another .pit file for i9195 and a firmware that work with it?
Thanks to everyone
Click to expand...
Click to collapse
I think her EMMc chip is probably dead, so needs replacing (new motherboard)
Hello,
Because I am an idiot I forgot to turn off the FRP lock on my device before flashing with ODIN and ended up with a brick.
After searching for some time, I found the solution to this problem and I will share it with you so you don't have to search again.
The phone will be stuck in a blue screen so use FRP hijacker to get out of the "an error occured" screen ( link:
) and reboot to Download screen.
Download the appropriate software with the correct binary for your device and unzip it.
Extract the PIT file from the CSC file unzipped above, and use it with ODIN in the PIT tab ( https://www.droidviews.com/extract-samsung-pit-file-from-firmware/ )
Flash the device as you would normally do.
Many thanks to [email protected] for the answer from his thread ( https://forum.xda-developers.com/t/...tra-super-image-needed.4156935/#post-83408361 )