Develop Bugs

Need to re-image Chinese Android phone

Hello,
I need help doing a fresh install on my android phone. It is a Chinese Android phone called Mega Droid purchased from chinavasion.com. As I do with computers I have installed stuff, removed stuff, gained root access and generally made a bit of a mess of my phone. I feel I need to do a complete re-install of the Android image. Herein lies the problem. I have no idea what Rom I could install with no issues both stock or custom? My phones details are:
Model Number: 11_gq2000s_fwvga
Android version: 4.2.1
Baseband version: MOLY.WR8.W1248.MD.WG.MP.V6.P4,2013/05/08 18:36
Kernel version: 3.4.5 [email protected] #6 Thu Jun 13 17:41:18 CST 2013
Build number: 11gp2000s_fwvga_20130606.
All other information can be found at: chinavasion.com/wjhk-AndroidPhones
If there is anything further you need please ask.
Cheers

[Q] Back to Stock

Hi Friends,
It's been an year since I decided to crack open my android OS and install an OS which was lot faster sans bloat ware. I chose to go with CWM recovery and Cyanogen. I was happy not seeing At&T logo while my phone boots up and was hoping much better things as I use this phone. However, no matter to which version I upgrade, CM has been extremely disappointing to say the least. Not to sound like I am whining, can someone guide me on how to get back to stock OS without bricking my device. My device details given below.
Model: AT&T Samsung Galaxy SIII (Samsung SGH-I747)
Baseband version: I747UCDMG2
Bootloader version: I747UCDMG2
Android version: 4.4.4
CM version: M10-d2lte (downgraded from M11-12 after issues with camera, call volume, mobile networks)
I am seeking help on:
1. Where can I get the stock ROM that suits my device current state
2. Steps on how to wipe off the current crap on my phone and install stock
Any help in this regard would be highly appreciated.
Thanks,
Sid

aim2lead said:
Hi Friends,
It's been an year since I decided to crack open my android OS and install an OS which was lot faster sans bloat ware. I chose to go with CWM recovery and Cyanogen. I was happy not seeing At&T logo while my phone boots up and was hoping much better things as I use this phone. However, no matter to which version I upgrade, CM has been extremely disappointing to say the least. Not to sound like I am whining, can someone guide me on how to get back to stock OS without bricking my device. My device details given below.
Model: AT&T Samsung Galaxy SIII (Samsung SGH-I747)
Baseband version: I747UCDMG2
Bootloader version: I747UCDMG2
Android version: 4.4.4
CM version: M10-d2lte (downgraded from M11-12 after issues with camera, call volume, mobile networks)
I am seeking help on:
1. Where can I get the stock ROM that suits my device current state
2. Steps on how to wipe off the current crap on my phone and install stock
Any help in this regard would be highly appreciated.
Thanks,
Sid
Click to expand...
Click to collapse
This link should help: http://forum.xda-developers.com/showthread.php?t=1968625

If your phone isn't unlocked and you are able to flash to stock 4.1.1, use the free method to unlock it before upgrading the bootloader.
http://forum.xda-developers.com/showthread.php?t=2529200

aim2lead said:
Hi Friends,
It's been an year since I decided to crack open my android OS and install an OS which was lot faster sans bloat ware. I chose to go with CWM recovery and Cyanogen. I was happy not seeing At&T logo while my phone boots up and was hoping much better things as I use this phone. However, no matter to which version I upgrade, CM has been extremely disappointing to say the least. Not to sound like I am whining, can someone guide me on how to get back to stock OS without bricking my device. My device details given below.
Model: AT&T Samsung Galaxy SIII (Samsung SGH-I747)
Baseband version: I747UCDMG2
Bootloader version: I747UCDMG2
Android version: 4.4.4
CM version: M10-d2lte (downgraded from M11-12 after issues with camera, call volume, mobile networks)
I am seeking help on:
1. Where can I get the stock ROM that suits my device current state
2. Steps on how to wipe off the current crap on my phone and install stock
Any help in this regard would be highly appreciated.
Thanks,
Sid
Click to expand...
Click to collapse
Hi OP,
were you able to go back to stock ROM from Android ver 4.4.4 Bootloader I747UCDMG2?
If yes, please let me know which stock ROM you used. I am in the same boat.
Thanks

Can I root this phone? Need Help.

Ok so I have experience rooting Samsung phones, my previous phone was the S4. Now I've seen posts saying you can't root this phone and others saying you can, so I am a little confused. Some things I've seen are the BeastMode kernel which allows you to root, but I'm not sure if it's even necessary. I'm also heard people using CF-Auto-Root on Lollipop, but chainfire's site shows it only for 4.4.4 not 5.1.1, so again I am confused.
Any help on if and how I can root would be much appreciated. Please and Thank You!!
Device Info:
Software Version: N910PVPU4COG5
Hardware Version: N910P.05
Model Number: SM-N910P
Android Version: 5.1.1
Baseband Version: N910PVPU4COG5
Build Version: LMY47X.N910PVPU4COG5

yes you can root/ cf auto root does not work on 5.1.1/ do alittle research and decide if you want pre 5.1 bootloader or if you took update to og5 then you can't use older kernel / any way you go...find a rom with root and superuser baked in....recommend hybrid x roms (sweet)...get your phone specs and decide which rom will suit your needs..
Sent from my SM-N910P using Tapatalk

Upgrading Android on Chinese Tablet with Allwinner A 31s CPU

Hi All,
First of all thanks for looking into this thread.
I am trying to upgrade android to 4.4.2 version in my chinese tablet.
Right now I have 4.2.2 version installed.
Model Name QTAB
General OS Android 4.2.2 JellyBean
CPU Quad-Core - Allwinner A31S,
Arm Cortex A7 with 1200 MHz frequency
GPU 8 Core Power VR SGX544
Memory 1GB DDR3
I found another tablet with the same CPU, so can I install the version of android provided by that tablet manufactorer? please advise.
Archive： Q102 A31S Tablet Stock Firmware 4.4.2
Firmware image file: sun6i_android_fiber-bs1078-OK.img
Firmware: Android KitKat 4.4.2
Model: Yonestoptech Q102 Allwinner A31Tablet
Image file size: 464 MB
Platform: Allwinner A31
Build number: fiber_bs1078-eng 4.4.2 KOT49H 20140606 test-keys
Firmware version: v4.5
Style: Q102
Company: YonesToptech
Another thing noticed is the DEVICE: fiber-bs1078 for the later and mine has a different one fiber-m784SQq6 . will that be a problem?
Thanks
Janko

Back to standard help

Hi all
I'm currently on:
Android Version 5.0.2
ViperOneM8 4.6.1
Kernel Version 3.4.0 ElementalX-m8-4.05-Sense
Baseband Version 1.25.214500021.06G_20.68.4196t.01_f
Build Number 1.40.401.8 CL549783 Release-keys
TWRP Version 2.8.7.0
I'm in the UK and i know that the device is unlocked to all networks so my question is:
(How can i get my device back to complete factory standard with the latest android version available and also unlocked)
PS: Its been so long since I've flashed a custom rom and kernel that unfortunately I've gone to the complete noob cave
If anyone can also point me to the exact files that i require it would be a great help too, And many many thanks in advance.
madant2011