help for port in blu advance 4.0 l
I followed these steps:
FOR MT6572 CHIP SETS:
Use boot image from any device (same chip set) with a working lineage OS ROM
Now copy these files from stock to port:
System/lib/hw/hwcomposer.mt65**.so
System/lib/libaudio.primary.default.so
System/lib/libcameracustom.so
System/lib/libcamalgo.so
System/lib/libcamdrv.so
System/lib/libfeatureio.so
System/etc/firmware
boot/kernel
boot/unventd.rc (only if you are getting stuck at logo)
and flash rom with ctr 6 but no step of the boot logo
help me please
mreyes2018 said:
help for port in blu advance 4.0 l. I followed these steps: FOR MT6572 CHIP SETS:...
Click to expand...
Click to collapse
I don't have this device but, the following threads may be helpful for what you are looking for. Don't be afraid to ask for some member guidance within one of them.
https://forum.xda-developers.com/showthread.php?t=2274332
https://forum.xda-developers.com/showthread.php?t=3503018
https://forum.xda-developers.com/showthread.php?t=3688261
I had just done a quick search for "Port Lineage MTK" & "Port Lineage Mediatek".
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Related
lineage-14.1-20171031-nightly-ham-signed.zip
open_gapps-arm-7.1-pico-20171105.zip
addonsu-14.1-arm-signed.zip
twrp-3.0.2-0-Z1.img
Android Debug Bridge version 1.0.39 Revision 3db08f2c6889-android (Ubuntu 16.04)
I can flash my Zuk Z1 with sideload wihout any problems and it worked before the same way, which I do now.
Now it doesn't boot and returns to TWRP-menu every time.
lg-optimus said:
lineage-14.1-20171031-nightly-ham-signed.zip, open_gapps-arm-7.1-pico-20171105.zip, addonsu-14.1-arm-signed.zip, twrp-3.0.2-0-Z1.img, Android Debug Bridge version 1.0.39 Revision 3db08f2c6889-android (Ubuntu 16.04)...
Click to expand...
Click to collapse
I don't have this device but, the following area of the forum is specific to your device.
https://forum.xda-developers.com/zuk-z1
With that stated...
I've located a handful of threads where one or more of them should help solve your problem and, if you need to, post a question within one of them for member guidance.
https://forum.xda-developers.com/showthread.php?t=3570896
https://forum.xda-developers.com/showthread.php?t=3577201
https://forum.xda-developers.com/showthread.php?t=3358239
https://forum.xda-developers.com/showthread.php?t=3570282
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Thanks, I found a solution in this forum. It looks like there is a bug somewhere, the situation was the same after I installed an update by the phone, but the command helped again.
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc count=1 bs=32
Hello everyboy
i hope, that you can help me:
after install lineageOS 14.1 for my Samsung S7 edge, i cant play music without a stuttering by playing (with and without headphones)
I have pluged/unpluged the USB Cable, start/stop the airplane mode and reboot/reflash the rom, active/deactive the audiofx, use different music apps - but without any effect.
I use LineageOS 14.1 20171107 and without extensions/mods.
Can someone help me?
Thanks
Lord Großmeister said:
Hello everyboy . i hope, that you can help me:...
Click to expand...
Click to collapse
Your best bet is to post this question within the following Official LineageOS thread for your device.
https://forum.xda-developers.com/showthread.php?t=3529098
The following thread is for assistance for your device if you are unable to obtain any support from the LineageOS thread.
https://forum.xda-developers.com/showthread.php?t=3489011
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Hey. I am a new user of the Lineage OS version 14.1 for the Asus Zenfone 2 Z00A - have the last update - 25.11.2017. I have a problem with a bank application and I can not handle it myself. After installation I manage to activate it, but when I try to log in to my account by entering a pin number, the application stops working. Here are probably a lot of people from Poland who use this app, so maybe someone knows how to fix this. I installed the root system before, tried to hide it in Magisk, but that did not help, so I installed a clean system, then Millenium Bank application - unfortunately does not work too.
Please help me :crying:
RyuuKan said:
Hey. I am a new user of the Lineage OS version 14.1 for the Asus Zenfone 2 Z00A - have the last update - 25.11.2017...
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Official LineageOS thread for your device.
https://forum.xda-developers.com/showthread.php?t=3545692
If all else fails, then your best bet is to post your question within the following thread.
https://forum.xda-developers.com/showthread.php?t=2997779
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Ibuprophen thanks for the reply. I will write in the topic of Asus device.
Anyway, I would like to leave my message here because I am curious about this problem with this application occurs on the other devices with Lineage OS 14.1. of other manufacturers, like LG, Samsung...
No help for Asus topic. Anyone use this application on Asus or other device? Do u have a problem like me?
Hi,
i have this problem: on the lineageos (for S4 mini, lte) downloads page only sha1 & sha256 check-files are offered. But via TWRP only md5 files can be checked.
Why this mismatch?
How can I have TWRP check sha1 or why does not lineage offer md5 files?
And further, there are many apps that calculated sha1. But none that I found can do an auto-compare against a .sha1 file (with the same name as the checked-file). Any suggestions for apps that can do this?
Regards, Ronald
revt3949 said:
Hi,
i have this problem: on the lineageos (for S4 mini, lte) downloads page only sha1 & sha256 check-files are offered. But via TWRP only md5 files can be checked...
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Official LineageOS thread for your device.
https://forum.xda-developers.com/showthread.php?t=3471761
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
@revt3949
I think the redtit is a better place to ask.
@Ibuprophen
This is definitively not device specific
kurtn said:
@revt3949I think the redtit is a better place to ask. @IbuprophenThis is definitively not device specific
Click to expand...
Click to collapse
I had read the question a bit differently...
@revt3949, This can actually be a 2 part question.
1) The Lineage Team used to provide both the md5 & sha below each of the downloads. After, approximately 3-4 months +/-, they decided to remove the md5 and has only provided the sha. So the question for Lineage would be more of "why was the md5 removed knowing that TWRP only verifies the md5".
2) The question for the TWRP Team would be more of "Why hasn't the Recovery been updated to allow for sha verification when the Lineage Team no longer provides the md5 checksums".
If someone was to explain how to get an md5 to create the file, then your answer would be "that's not the question at hand. It's the ability to verify the only checksum that's provided for LineageOS within the TWRP Recovery".
According to the following TWRP link...
https://twrp.me/contactus/
There's 4 ways to ask the TWRP team a question.
1) Via the link above.
2) Via Google Plus (https://plus.google.com/communities/106804207647688456928)
3) Via the devices Official TWRP XDA thread.
4) Via the submission of an Issue through the specific devices Github tree.
I wish you both the best of luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
i made a custom device files with reading some cyanogenmod manuals
but I couldn't build with it how can I add my device to buildable list
and tell me that I need to add on vendor.mk to make better result
device and vendor files are in attachment file
and here is my system files(extracted)
https://github.com/djdisodo/x80power_b2n4_system
djdisodo01 said:
i made a custom device files with reading some cyanogenmod manuals...
Click to expand...
Click to collapse
I have never created a ROM but, here's just a few guides for doing so that's probably your best place to obtain some member guidance.
https://forum.xda-developers.com/showthread.php?t=3551484
https://forum.xda-developers.com/showthread.php?t=3567885
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.