Hey all, I was wondering if some one wanted to be very kind and provide a backup of emmcblk0 for me. I bricked my Z2F by some silly means. I am hoping to not have to have motorola replace it for money because it is in the dreaded Qualcomm USB Loader 9008 mode and thus fixable, technically. Ive read some success with moto Z and moto X for writing a backup of the emmc to an img file and writing that to an SD card.
I really want to contribute to the Z2F, but I cant really do that with a dead device.
You may ask, how did I brick my phone if I followed the rules. Turns out you cant switch to slot b in TWRP, otherwise you get a boot loop, and then try to use adb to switch back to slot a. You must flash a ROM again for it to not enter the 9008 mode. I found out the hard way, and I would hate to spend money on a replacement device if the current one is still salvageable.
Thanks for helping me through my momentary stupidity.
How do you make a emmcblk0 back up?
You must be rooted and then run something like:
"adb shell
su
dd if=/dev/block/mmcblk0 of=/some/file/directory bs=1m"
gbuscrizist said:
Hey all, I was wondering if some one wanted to be very kind and provide a backup of emmcblk0 for me. I bricked my Z2F by some silly means. I am hoping to not have to have motorola replace it for money because it is in the dreaded Qualcomm USB Loader 9008 mode and thus fixable, technically. Ive read some success with moto Z and moto X for writing a backup of the emmc to an img file and writing that to an SD card.
I really want to contribute to the Z2F, but I cant really do that with a dead device.
You may ask, how did I brick my phone if I followed the rules. Turns out you cant switch to slot b in TWRP, otherwise you get a boot loop, and then try to use adb to switch back to slot a. You must flash a ROM again for it to not enter the 9008 mode. I found out the hard way, and I would hate to spend money on a replacement device if the current one is still salvageable.
Thanks for helping me through my momentary stupidity.
Click to expand...
Click to collapse
So do u have emmc bulk img backup now. if yes i'm in dire need please provide, Thanks!
Related
I accidentally formatted bootloader, and now my device unable to detect,boot or anything. Is there anything I can do of ?
(might try everything to work it out )
Can you boot into the preloader with volume up and power pressed?
flash ROM via FlashTool
BlueFlame4 said:
Can you boot into the preloader with volume up and power pressed?
Click to expand...
Click to collapse
no, i could not
Kittehdispenser said:
no, i could not
Click to expand...
Click to collapse
Sounds like a hard brick, which means your phone is destroyed. What exactly did you do?
BlueFlame4 said:
Sounds like a hard brick, which means your phone is destroyed. What exactly did you do?
Click to expand...
Click to collapse
welp, i tried to install custom rom ( which need to download the rar and paste it into INTERNAL) but i accidentally paste it to my SD card. Then i start to install it.
Then i said it's uninstallable, I just restart my phone and everthing went normal buy my wallpaper screen turns black and unable to read it tho USB ( Just the standby screen shows wallpaper)
Then my brothers came out and said that all you need to do is format it again and reinstall. We tired countless times . But then it have another option which above Format everything but not bootloader and another is Format everything and bootloader.
Then my bro press it and ... It became bricked.
it's still warrantyable so .. I plan to play dumb to the warranty company if I can't fix it.
( even if i play dumb idk what reason I need to come off, if i say yesterday the battery from 70% drop to 0% then it unable to open again )
PS: before this happen my battery happens from 70% drop to 0%, after charged. it's fine
PPS: give me a good excuses to play dumb C::
Wait, wait. How did you format the bootloader? No recovery should have this option! The only possible option to hard brick the P8000 is to pull out the USB cable in the exact moment when the SPFlash Tool writes it. So, can you elaborate a bit more about what you've done? I'm pretty sure you're missing something.
Soft Bricked HTC Desire 616
BlueFlame4 said:
Wait, wait. How did you format the bootloader? No recovery should have this option! The only possible option to hard brick the P8000 is to pull out the USB cable in the exact moment when the SPFlash Tool writes it. So, can you elaborate a bit more about what done? I'm pretty sure you're missing something.
Click to expand...
Click to collapse
Hi,
I did something similar with my HTC Desire 616. I choose "Format All + Download" option with SP Flash Tool. The phone soft bricked. Later I tried "format whole flash (including bootloader)". It's still soft bricked...
Is there a way to revive my phone back??? :crying:
I had the same problem - but it is possible to set the phone to a special bootloader mode called META mode - see this video: https://www.youtube.com/watch?v=A3TmXtOA0IA
To do so you have to open the phone and disconnect the battery. You can find a howto easily on youtube.
Then set up everything to flash the phone (SP-Flashtool, scatter file, etc.) and push the volume down button while connecting the phone to the computer. This switches the phone to META mode, the computer can recognize the phone, installs the preloader driver and finally flashes the phone
Maybe you have to do the procedure twice because on the first connection only the preloader driver will be installed.
This worked for my P8000(B) which I treated with SP-Flash Tool and "Format All + download"
Be aware that you formatted the NVRAM and lost your IMEI's
FrauHofrat said:
P8000(B)
Click to expand...
Click to collapse
What the meaning of (B)? Just asking because i have (W)
Tecno spark 3 pro clone flash file mt6570 android 9.0 firmware
Hi
I need your assistance, please help me find the firmware for the above phone. I recently tried to flash it with a Spark 3 clone firmware i got online but it gives an error STATUS_PARTITION_NOT_FOUND and also i accidentally formatted the bootloader on SP Flash Tool so the phone is a brick, it can't charge, and it can't turn on. I have screenshots of the About section when the phone was working, which contains the phone's features model and build but on opening the back cover of the device, i realized its a clone phone and i cannot determine its real model to get the exact right flash file.
Thanks
Some of us are bound to "brick" our Max's at some point, we need a genius that knows the right test points to help us out!
Thanks!
Totally agree. I now manage to boot into EDL and Fastboot, but have a locked bootloader and don't know how to reset the phone
(the only thing I did was an update, then bootloop...)
Help Please..Same with me.
My phone was hardbrick i think.
No download mode, no fastboot mode and my device manager just only recognize as HS-USB Diagnostic 900E
How i can get back to life my phone
Thanks
This should work on Mi Max too:
http://en.miui.com/forum.php?mod=viewthread&tid=310325&extra=page%3D1&mobile=2
Check here: http://en.miui.com/thread-328371-1-1.html
panospc said:
Check here: http://en.miui.com/thread-328371-1-1.html
Click to expand...
Click to collapse
I also posted it here
I am everywhere
How do I put the phone into fastboot mode if it is hard bricked? It won't turn on, I get no responce from phone. When I use method connecting test point to metal cover on mother board of phone usb connects to PC and MiFlash recognizes phone. Try to flash though and I get an error message. No matter what ROM I use, zipped, unzipped or tgz file. Can my phone be unbricked? What am I doing wrong? I have a Mi Max 64GB and am using HELIUM Roms. Please help. I am using this method
http://en.miui.com/thread-328371-1-1.html
Everything is good up to when I click on flash. Then I always get the error message.
Error message is:
The filename, directory name, or volume label is incorrect.(0x8007007b: Open programmer "MPRG*.hex").
I have no clue. Not my first time flashing ROMs or unbricking a phone. It is my first time on a Xiaomi. Only done blackberry and samsung before.
My phone is bricked,when i connect it to pc its show in device manager Qualcomm 9008 mode.How to unbrick it!
Best regards! :crying::crying:
Dzeki064 said:
My phone is bricked,when i connect it to pc its show in device manager Qualcomm 9008 mode.How to unbrick it!
Best regards! :crying::crying:
Click to expand...
Click to collapse
same here
try if you have warranty.. or try jtag box.. there isnt a way to fix this yet.. funnt thing on G2 shortening a circuit brings back to life..
there's no way to fix it? really o,O
I wrote a guide a few months ago for the Lg G3, isn't it possible to use it with the right DLlL and TOT/KDZ file?
https://open-freax.fr/guide-unbrick-your-lg-g3/
emmc chip is faulty or corrupt.
I fixed mine by heating up with hot air soldering gun until solder reflow.
cloud1250000 said:
there's no way to fix it? really o,O
Click to expand...
Click to collapse
Same here on my h811. I followed instruction almost exactly but missed 1 thing. It looks like there is no way to fix it by reflashing. Having soft bricked Samsung,Moto and LG g2 and finding ways to recover all of them,it was a shock that this happened to my g4. Androidbrick.com also mentions that we are out of luck.
Other people have sent it back and got it fixed. You can go to LG website to apply for repair. Did the same today and will update the outcome.
When I tried to reverse the sbl1 image, I saw some instruction about booting from mmc1 (I have no clue if it's from a usb stick or the sdcard)...
(since I have really ****ty skill, I had no success in reversing anything related to the bootchain, but I can still read clear string...)
I guess it should be possible to write a copy of the g4 system on it and then boot from it. Unless lg kept the code in their bootloader but patched it out.. (would be stupid tho...)
cloud1250000 said:
When I tried to reverse the sbl1 image, I saw some instruction about booting from mmc1 (I have no clue if it's from a usb stick or the sdcard)...
(since I have really ****ty skill, I had no success in reversing anything related to the bootchain, but I can still read clear string...)
I guess it should be possible to write a copy of the g4 system on it and then boot from it. Unless lg kept the code in their bootloader but patched it out.. (would be stupid tho...)
Click to expand...
Click to collapse
That's pretty much exactly how to fix the problem from what I seen from the people who are withholding information. I was able to get as far as make the phone turn on and Secure Boot Error 1006. I also at one point got it to detect as LGE Android NET device, unfortunately I didn't make a backup of the SD card before flashing another partition to try and go further. I also got the recovery to popup and attempt to restore default settings, but it just reboots into the 1006. I also created the entire G4 system partition table and everything from a US991 KDZ file and got the same SBE 1006 as I did with the LS991 dump.
I think perhaps LG is working with a universal unlocked boot loader on the SD card to bring up download mode and flash whatever stock firmware. They are for sure plugging into the SD card and then flashing via USB
Noksucow1 said:
That's pretty much exactly how to fix the problem from what I seen from the people who are withholding information. I was able to get as far as make the phone turn on and Secure Boot Error 1006. I also at one point got it to detect as LGE Android NET device, unfortunately I didn't make a backup of the SD card before flashing another partition to try and go further. I also got the recovery to popup and attempt to restore default settings, but it just reboots into the 1006. I also created the entire G4 system partition table and everything from a US991 KDZ file and got the same SBE 1006 as I did with the LS991 dump.
I think perhaps LG is working with a universal unlocked boot loader on the SD card to bring up download mode and flash whatever stock firmware. They are for sure plugging into the SD card and then flashing via USB
Click to expand...
Click to collapse
If it can help I had the 9008 problem on my LG G4 H811. First there was no dump to do jtag , I found mmcblk0 files somewhere on xda , so I took a 32 gb SD card, flashed it with PrimaryGPT ( taken from extracted 10N H811 firmware) using win32diskimager and then I flashed each of the 50 first mmcblk0 to the SD card using dd command of Ubuntu, put the SD card into the phone and bam, phone is alive and it can entre download mode. I tried to flash a 10N firmware but the firmware goes to the SD card, I finally flashed a custom recovery, custom rom, the phone internal memory became the SD card, listing /dev/block folder does not show any trace of the emmc, so I think that my emmc is dead
bottom line, like you, I think that the solution is with the SD card method, the inspiration came from the optimus g pro boot repair with some creativity, but I think that something is missing .
leptdre said:
If it can help I had the 9008 problem on my LG G4 H811. First there was no dump to do jtag , I found mmcblk0 files somewhere on xda , so I took a 32 gb SD card, flashed it with PrimaryGPT ( taken from extracted 10N H811 firmware) using win32diskimager and then I flashed each of the 50 first mmcblk0 to the SD card using dd command of Ubuntu, put the SD card into the phone and bam, phone is alive and it can entre download mode. I tried to flash a 10N firmware but the firmware goes to the SD card, I finally flashed a custom recovery, custom rom, the phone internal memory became the SD card, listing /dev/block folder does not show any trace of the emmc, so I think that my emmc is dead
bottom line, like you, I think that the solution is with the SD card method, the inspiration came from the optimus g pro boot repair with some creativity, but I think that something is missing .
Click to expand...
Click to collapse
YES! This is exactly what I wanted to test, even if the emmc is dead, your phone is still "fine." Use the sd slot and it will rise from the dead.
cloud1250000 said:
YES! This is exactly what I wanted to test, even if the emmc is dead, your phone is still "fine." Use the sd slot and it will rise from the dead.
Click to expand...
Click to collapse
to do such thing, we need a database of phone dumps for now i need H815 partitions (mmcblk0)
yeah maybe we'll have more chance if we make a thread in the dev place.
it could help alot of people with bootloop problem..
I can fix these phones talk me on WhatsApp +918989874040
Sent from my LS-4004 using Tapatalk
https://mega.nz/#F!yZ9iERoa!q9eoP4uQoPLRqyiabBIHaA
I have got a H818P bricked
Anyone can provide a solution on how to unbrick it? as this thread just provides H815 unbrick solution:crying:
:crying:
I had no luck at all with mine. Theres no indication the card is being read, phone just gets to boot screen then turns off again after 15-20 seconds then does nothing till the battery is taken out and left for a while. Then the same thing again.
mickrick said:
I had no luck at all with mine. Theres no indication the card is being read, phone just gets to boot screen then turns off again after 15-20 seconds then does nothing till the battery is taken out and left for a while. Then the same thing again.
Click to expand...
Click to collapse
Have you tried starting your phone in download mode?
hiker123 said:
Have you tried starting your phone in download mode?
Click to expand...
Click to collapse
Better still, I got it repaired under warranty.
sup all was screwing with some crap i shouldnt have and have bricked my phone. the pwr+vol does nothing
plug in to charger gives no led light
plugin to computer does not give emmc access
phone is prob trash but i like tinkering neway
i have a dd copy of all partitions 1-65 befor crash
phone is s-off and rooted
so my thought is how to push the dd imgs to the phone
i messed with partition 1 and 54 so is there a way to unbrick
thx in advanced
I cannot make any promises that it will work but we can try something.
I discovered that if you flash a sd card with the dragonboard 410c -->> DB-Boot-Tools
And use the partitions backups you have as files.
It is possible to make a sd card that will boot.
some qualcomm devices will boot the sdcard if the emmc is dead.
What partition did you trash?
Aboot ??
---------- Post added at 10:25 PM ---------- Previous post was at 10:16 PM ----------
bow2evil said:
sup all was screwing with some crap i shouldnt have and have bricked my phone. the pwr+vol does nothing
plug in to charger gives no led light
plugin to computer does not give emmc access
phone is prob trash but i like tinkering neway
i have a dd copy of all partitions 1-65 befor crash
phone is s-off and rooted
so my thought is how to push the dd imgs to the phone
i messed with partition 1 and 54 so is there a way to unbrick
thx in advanced
Click to expand...
Click to collapse
I forgot to mention.
If you are in 900E mode !!!
Then you need to short the data positive usb line to the ground of the usb cable.
Press power button 3 to 5 seconds
New device will show in windows dev manager.
After new device shows you need to install qualcomm drivers.
After all is done windows will show hs usb qdl9008
Unfortunatly I believe the firehose to flash in emergency dl mode has to be signed.
I have a couple ideas but i nedd to know what partition you fried.
must be
aboot
hosd
tz
radio
Which one did you fry?
mmcblk0p1
i was pissed off at the phone and started self destruction mode lol
sorry it took so long to get back
i got a xt1254 been hacking it lately
i still have a dd dump of each partition one with s-off and one with s-on all 58 something partitions
didnt know where the s-off bit was stored so a backed everything
figured that htc would want the users to feel better then haha you got a brick?
but the lack of a firehose proves it
BTW removing phones battery while connected to computer results in 9008 mode as well i believe
Hello!
I have flashed a firmware for my HTC 10 extracted from a ruu.zip, but the format of these zip should be incorrect and now the phone doesnt boot ** ultrafacepalm **. No boot, no screen on, no charge led on...
From my experience with other phone (s4 mini) I think maybe put a dump emmc from an equal mobile on my sdcard maybe can get it started and run a ruu.exe or ruu.zip to restore it.
Could someone make a dump of an HTC 10 32G international unlocked emmc please? I would like to try this, the next thing would be to send it to HTC SAT.
I tried to recreate the partition table of the HTC10 with fdisk by sectors and load the content of the different firmware files using dd, I dont know if it is possible... Maybe I need to modify the RAMDISK to indicate that I want to start reading the SD partitions and not the EMMC...
https://forum.xda-developers.com/htc-10/how-to/htc-10-partition-table-t3374048
Thank you!!
Are you able to access download mode? Volume Down+Power button until you see small gray HTC logo, then release both buttons. If you can please let me know as its possible you can execute the command fastboot getvar all in cmd
Hel10s said:
Hello!
I have flashed a firmware for my HTC 10 extracted from a ruu.zip, but the format of these zip should be incorrect and now the phone doesnt boot ** ultrafacepalm **. No boot, no screen on, no charge led on...
From my experience with other phone (s4 mini) I think maybe put a dump emmc from an equal mobile on my sdcard maybe can get it started and run a ruu.exe or ruu.zip to restore it.
Could someone make a dump of an HTC 10 32G international unlocked emmc please? I would like to try this, the next thing would be to send it to HTC SAT.
I tried to recreate the partition table of the HTC10 with fdisk by sectors and load the content of the different firmware files using dd, I dont know if it is possible... Maybe I need to modify the RAMDISK to indicate that I want to start reading the SD partitions and not the EMMC...
https://forum.xda-developers.com/htc-10/how-to/htc-10-partition-table-t3374048
Thank you!!
Click to expand...
Click to collapse
Nope, that's the problem, smartphone it's completely dead, no fastboot, no screen on, no led on...
It sound like a I need to send to HTC for repairmen, maybe motherboard replacement. Daaamn, I did this thousand of times, but now I just fu** it
I recreate the partition table inside the SD card, cause with a s4 mini I was able to boot up in similar situation, Qualcomm soc, now I don't know if this it's possible with the HTC 10.
ayyu3m said:
Are you able to access download mode? Volume Down+Power button until you see small gray HTC logo, then release both buttons. If you can please let me know as its possible you can execute the command fastboot getvar all in cmd
Click to expand...
Click to collapse
Hel10s said:
Nope, that's the problem, smartphone it's completely dead, no fastboot, no screen on, no led on...
It sound like a I need to send to HTC for repairmen, maybe motherboard replacement. Daaamn, I did this thousand of times, but now I just fu** it
I recreate the partition table inside the SD card, cause with a s4 mini I was able to boot up in similar situation, Qualcomm soc, now I don't know if this it's possible with the HTC 10.
Click to expand...
Click to collapse
Personally i think you might bricked it messing with the partition tables and not by flashing the wrong firmware. A wrong firmware doesn't pass through if the CID and MID doesn't match, even when it has a different region code it won't flash.
Bricking a htc with an incorrect firmware is nearly impossible......
Hel10s said:
Nope, that's the problem, smartphone it's completely dead, no fastboot, no screen on, no led on...
It sound like a I need to send to HTC for repairmen, maybe motherboard replacement. Daaamn, I did this thousand of times, but now I just fu** it
I recreate the partition table inside the SD card, cause with a s4 mini I was able to boot up in similar situation, Qualcomm soc, now I don't know if this it's possible with the HTC 10.
Click to expand...
Click to collapse
Hi,
I have had the same result (No Boot, No Charging Led, Device recognised as Qualcomm device instead of HTC Phone, etc...)
I have tried several method and for our HTC model, it does not exist yet a method/tool to reflash motherboard.
I have had to pass via HTC Support and they changed my motherboard... fortunately under warranty
Does your device is recognised when plugged on PC ?
Check : https://forum.xda-developers.com/showpost.php?p=75038281&postcount=6
chrisftlse said:
Hi,
I have had the same result (No Boot, No Charging Led, Device recognised as Qualcomm device instead of HTC Phone, etc...)
I have tried several method and for our HTC model, it does not exist yet a method/tool to reflash motherboard.
I have had to pass via HTC Support and they changed my motherboard... fortunately under warranty
Does your device is recognised when plugged on PC ?
Check : https://forum.xda-developers.com/showpost.php?p=75038281&postcount=6
Click to expand...
Click to collapse
Yes! That's the result, no boot, no led and it's recognized as 'Qualcomm HSUSB 9008' or similar name.
Yeah, maybe that's the solution, send to HTC and wait for a motherboard replacement (under warranty :fingers-crossed
On LG devices, I was able to restore to stock from QHS_USB 9008 mode several times. I have no idea if the same special Windows program, along with the files from the stock RUU can do the job. Google QHS_USB 9008 HTC and see if you find anything.