Hello, i own an HTC Desire EYE with ViperOne M8 6.1.0 (Android 6.0.1), i just observed today that my phone is taking 2 hours on average to fully charge, but my brother's phone, which is also a Desire EYE (M910X version) charges just fine on the same charger.
Both our phones took the same time to charge till yesterday (a total time of around a year), now his phone charges in less than an hour but my phone says its charging slowly, and even when it's not, it shows 2 hours to fully charge.
Please help.
I got the same issue of slow charging notification even if I'm using the quick charge 2.0 charger. I found out the problem was with the cable I used. I'll change cables soon and report back.
I installed the 2.0 update yesterday and now it seems the watch will not charge. It runs out of battery and dies. It will then charge to 1% and restart and then the cycle continues. Is there anything I can do?
I have the same issue. Cannot get it to charge enough to downgrade.
I just bought my Zenfone 5Z two weeks ago (i'm very happy with this device by the way), i have tried to use AI charging or even schedule charging but is not working, i always connect the phone during the night but it always get charge in one/two hours and it does not stop when it reach the 80%, does anyone have the same problem?
Firmware: WW_ZS620KL_90.11.162.98_20190816
Your phone is fine, the ai charging and schedule charging are not designed to stop the charging at a certain percentage, they are designed to slow down the charging rate to slow down the battery degradation.
A week ago my phone suddenly didn't charge and stuck on whatever battery percentage it was on and only charges when it's turned off.
I've tried replacing the battery with a new one and use another charger but the issue still the same. Until I've changed the ROM, it started to charge normally; So I reflashed the old ROM I was using (AICP Nougat 7.1) and installed ampere to see how much current is flowing during charging and it was between 875 and 1025mA then I enabled the option to see charing info on the lock screen and it was reading the following current as 1mA only and 0mA if I'm charging it from my laptop. (see the attachments below)
I've tried doing a clean flash of the ROM and flash a new kernel(Hybrid v9) and it still the same. no matter what charger or cable I use.
Any suggestions on how to fix this problem?
Thanks
In hybrid kernel try set 2000mA in boeffla-config app for AC currient charge section and turn on `ignore unstable power` and `ignore safety margin`.
It works for me.
Hey guys,
hope to get some help here on the forum. I couldnt find any other thread similar to my problem or didnt found it.
So i got the new Pixel 6 Pro and use it out of the box und drained the battery completely. when i wanted to charge the p6p i noticed that it charges really really slow. it took 1 hour to charge 16%. and 2 hours more to 32%. i left the phone charging overnight and noticing in the morning it was at 52% after more then 8 hours of charging.
Im using the original 30w google charger with the original cable from the p6p box. i also tried with my 30w charger from oneplus but didnt work either. i did a soft reset and a hard reset. left it charging with the phone turned off. I tried evertything.
Some of you experiencing the same problem or got any ideas on how to help?
Thanks in adavance.
Try disabling the adaptive charging when you need to top up before bed, this will slow charging rate so you don't overcharge when you have an alarm set that will be coming up within approx 8 hours
i disabled the adaptive charging option and even the intelligent battery option to make sure it charges "normally" but it didnt help.
you need a charger that supports 30W via PD 3 PPS to get fast charging.
OP charger does not suport either and old Pixel charger probbly does not either as this is first for Pixel phones being able to do 30W
i bought the new original 30 watt charger from google (https://store.google.com/de/product/usb_c_30w_charger?hl=de) and i am using the original cable from the p6p box. i just tried the oneplus charger to check if the google pixel 30 watts charger isnt working correctly
tw1st3rx said:
i bought the new original 30 watt charger from google (https://store.google.com/de/product/usb_c_30w_charger?hl=de) and i am using the original cable from the p6p box. i just tried the oneplus charger to check if the google pixel 30 watts charger isnt working
Click to expand...
Click to collapse
Hmm does it say charging rapidly when using the Google charger?
yes it does but it also says 16 hours left of charging
edit: now it says 1,5 hourse left. i will update after this time
now its stuck at 70% and it says full charged in 11 days ...
Have you tried different chargers or cables? Doesn't sound right
i tried different cables and everything ... but now i contacted the support and they change the phone ..
tw1st3rx said:
now its stuck at 70% and it says full charged in 11 days ...
Click to expand...
Click to collapse
Adaptive charging, if you read the description you need to set an alarm to wake up in the morning, and the battery will be at 100% at that time or just before. So I guess if you don't have one set then it will take forever or never fully charge with those settings on.
I am still thinking of taking this stupid google charger back as there is no point having it and I had to buy it, than that over my older google chargers charging over night at a snails pace.
Even during the day when I plug either in they both say rapid charging, and old charger and new one 30W give the exact same full charge time estimation
If you can't measure what is going on, everything is useless. Get a power meter monitor, something like this:
https://www.amazon.com/gp/product/B07D316FHM
I have one for USB A and one for USB C. I literally threw away 3/4 of all my USB cables when I found out they were crap.
Just bought one of theses Anker USB C Charger, 65W .
Max power charging was 13.5W (9Vx1.5A), the same as my Pixel 3XL charger so back it went.
*Edit* After reading the article in Post #18 below it looks like the Phone is the problem and not the Anker charger.
I'm still looking...I miss my OnePlus Warp speed charger!
just to keep you up to date. i got a new one in exchange and it works perfectly ... so must have been a "monday model" (broken battery or something) - i am using the same adapter as before
I just got one of the 30W chargers from Google to give that a go
It charges @18W up from 13.5W on the Pixel 3XL charger, so no real benefit and nowhere near the 30W advertised.
Definitely miss the 65w charge from my Xiaomi which charges in less than an hour!
Tested: The Pixel 6 charges much slower than Google implied
The Google Pixel 6 and Pixel 6 Pro charging is oddly slow despite talk of 30W speeds, taking nearly two hours to fully charge. Here's why.
www.androidauthority.com
for the first time since ive had the phone i let it get to zero and shut down today. Took most of the day to do so, ended up letting netflix play for 5 hours straight and must have been another 3 or 4 hours of tiktok before it died. I wanted to see how long it takes to charge fully. It finally died at 7:21pm and using my pixelbook charger which i think is 45w the p6p said 2 hours exactly to charge to full. Will see if thats accurate or not.