When I've succesfully installed twrp 3.2.1 or 3.1.1, the phone stuck in boot logo while recovery mode loading and than reboot again. But when I've installed twrp 3.0.2 there is no problem on entering twrp menu. Version 3.2.1 and 3.1.1 does not compatible with Z551ML?
I'm using Android 5 (Lolipop) by the way...
Found the problem. 3.1.1 and upper versions works with only android 6 bootloader. I've another question than... Is there any way to retun original recovery mode from TWRP?
I've upgraded my phone to android 6 and than flash twrp 3.2.1 again but I got same result.
rangerofsoul said:
I've upgraded my phone to android 6 and than flash twrp 3.2.1 again but I got same result.
Click to expand...
Click to collapse
where you find 3.2.1? you sure its for zenfone2? if yes then 3.2.1 support android 8.1
you need test loower versions
zentao78 said:
where you find 3.2.1? you sure its for zenfone2? if yes then 3.2.1 support android 8.1
you need test loower versions
Click to expand...
Click to collapse
I tried 3.0.2 and install lineage OS its succesfully completed. Is there any way to disable "os validation error" on while first boot screen?
zentao78 said:
where you find 3.2.1? you sure its for zenfone2? if yes then 3.2.1 support android 8.1
you need test loower versions
Click to expand...
Click to collapse
It is available on Twrp's official website, and I have it on my z551ml. It is works fine with lineage 14.1.
Related
I had recently updated my device to Oxygen OS 4.0, my device got unrooted in the process. trying to install TWRP, but not able to. the process of installation goes through perfectly fine. but the recovery doesn't show up on the phone. stuck with the stock recovery.
Aads6050 said:
I had recently updated my device to Oxygen OS 4.0, my device got unrooted in the process. trying to install TWRP, but not able to. the process of installation goes through perfectly fine. but the recovery doesn't show up on the phone. stuck with the stock recovery.
Click to expand...
Click to collapse
shutdown the phone . then try to go to recovery and also use twrp (.28) modified for Oxygen OS (N)
Aads6050 said:
I had recently updated my device to Oxygen OS 4.0, my device got unrooted in the process. trying to install TWRP, but not able to. the process of installation goes through perfectly fine. but the recovery doesn't show up on the phone. stuck with the stock recovery.
Click to expand...
Click to collapse
Boot to OOS, install flashify or official twrp app from play store. Download modified twrp (http://downloadmirror.co/1KuN/twrp-3.0.2-1.28-oneplus3.img) and flash it thru downloaded apps.
OR
Sideload the modified twrp.
I have been using the modified TWRP version 3.0.2-1 since OOS beta 7 (now I am on the latest Nougat stable build).
I have noticed that TWRP takes too long to open and remains stuck on the main screen. Is there a newer version of TWRP that supports flashing the latest builds? Do we even need modified TWRP now for flashing?
mharis05 said:
I have been using the modified TWRP version 3.0.2-1 since OOS beta 7 (now I am on the latest Nougat stable build).
I have noticed that TWRP takes too long to open and remains stuck on the main screen. Is there a newer version of TWRP that supports flashing the latest builds? Do we even need modified TWRP now for flashing?
Click to expand...
Click to collapse
I used latest official twrp 3.0.3.0 (https://forum.xda-developers.com/oneplus-3/development/recovery-official-twrp-oneplus-3-t3539129) flashing 4.0.1->4.0.2.
I have root and encryption and twrp can unlock the encryption.
siwan05 said:
I used latest official twrp 3.0.3.0 (https://forum.xda-developers.com/oneplus-3/development/recovery-official-twrp-oneplus-3-t3539129) flashing 4.0.1->4.0.2.
I have root and encryption and twrp can unlock the encryption.
Click to expand...
Click to collapse
awesome, thanks!
So a couple of months ago, I installed the official, yet korean, firmware (Android Version 5.0.2) on my Lg G Pad V500.
Now I wan´t to install Lineage OS but I always fail to install TWRP.
I followed this guide and also tried the guide from lienage os. I flashed the proper TWRP version with the official TWRP App and the app claimed that it was successfully.
Here comes the problem:
I can´t boot into recovery mode.
I tried it with adb "adb reboot recovery" but ended up by the LG Logo and a message in the upper left corner telling:
secure booting error! cause: boot certification verify
Click to expand...
Click to collapse
I also tried the key combination while booting (POWER + volUP + volDOWN) but that didn´t work either.
Here are some Specs:
Android version: 5.0.2
Kernel version: 3.4.0
Build Number: LRX22G
Software version: V50030a
Which TWRP Version did you use? I have a v500 too and was running fine with twrp 3.2.2.0. I yesterday updated to twrp 3.2.3.0 and get the same error while trying to boot into twrp. I guess 3.2.3.0 is the problem.
I'm also getting that since latest updates... Spent 3 hours trying to boot into recovery only managed it once and clearing cache didn't fix it. Haven't been able to get in again...
Tried with TWRP 3.2.2-0
meistadieb said:
Which TWRP Version did you use? I have a v500 too and was running fine with twrp 3.2.2.0. I yesterday updated to twrp 3.2.3.0 and get the same error while trying to boot into twrp. I guess 3.2.3.0 is the problem.
Click to expand...
Click to collapse
I tried version 3.2.2-0 but go the same message when trying to reset.
Which rooting method did you use? I bought mine v500 used and twrp was already installed, so I hadn't to deal with rooting and all that stuff. I recently read a lot about and think I will have to try different method to get twrp running again. But if you have hints for me, I would be thankfull.
I vaguely remember that you had to use 4.4 kitkat base for root & TWRP, not 5.x. Don't know if this still apply.
meistadieb said:
Which rooting method did you use? I bought mine v500 used and twrp was already installed, so I hadn't to deal with rooting and all that stuff. I recently read a lot about and think I will have to try different method to get twrp running again. But if you have hints for me, I would be thankfull.
Click to expand...
Click to collapse
I used KingoRoot
[HELP] Get stuck in bootanimation &then only boot to TWRP after upgrade Magisk & TWRP
I have sucessfully rooted my phone but yesterday when i upgraded Magisk from 16.4 to 17.1 and then flashed lasted TWRP, my phone some how corrupted .
After that I tried to flash Factory Image and boot TWRP portable -> Flash ElementalX 2.05 -> Magisk 17.1 -> VerifiedBootSigner-v8 -> Reboot but my phone get stuck in bootanimation about 5 min and then reboot to recovery. Then it will always boot back to recovery when I reboot.
I have searched here but couldn't find any solution.
I tried to flash ElementalX and TWRP only and my phone booting normally. But anytime I flash Magisk it can't.
Please help me, I don't know what to do next, Thank you and sorry for my bad English. :crying:
I had the same issue as well. I think is is due to the latest TWRP update. I was running Magisk 17.1 with no issues, but once I tried installing the latest TWRP build, I was unable to boot. I even tried connecting to my computer and trying to boot using the boot.img from android. I am currently running the official release of android P. I ended up just doing basically a dirty flash of P over what was already installed to reset the bootloader, radio, etc. I'm going to just end up running the previous version of TWRP until the dev releases something that is confirmed to be stable.
Cozmikk said:
I had the same issue as well. I think is is due to the latest TWRP update. I was running Magisk 17.1 with no issues, but once I tried installing the latest TWRP build, I was unable to boot. I even tried connecting to my computer and trying to boot using the boot.img from android. I am currently running the official release of android P. I ended up just doing basically a dirty flash of P over what was already installed to reset the bootloader, radio, etc. I'm going to just end up running the previous version of TWRP until the dev releases something that is confirmed to be stable.
Click to expand...
Click to collapse
What version of TWRP did you use?
Yeah I have TWRP 3.6.0 installed with MIUI android 12 and I want to upgrade to android 13 and thought yo update TWRP before I start so I thought to check with you all of it's safe to flash the new TWRP release 3.6.1 through the old one 3.6.0
Thanks in advance
Aserar said:
Yeah I have TWRP 3.6.0 installed with MIUI android 12 and I want to upgrade to android 13 and thought yo update TWRP before I start so I thought to check with you all of it's safe to flash the new TWRP release 3.6.1 through the old one 3.6.0
Thanks in advance
Click to expand...
Click to collapse
It is easy and possible for my OnePlus and Xiaomi sweet devices.
TWRP Install (Requires TWRP 2.8.4 or higher already installed):
Download the latest TWRP image file (.img) from the download link and boot TWRP. Go to install and find and select the Images... button. Browse to the image that you downloaded and select it. Choose recovery and swipe to flash.
Your hardware may be different.
RTFM:
TeamWin - TWRP
This is the Team Win website and the official home of TWRP! Here you will find the list of officially supported devices and instructions for installing TWRP on those devices.
twrp.me