Dear Experts, I need your help, I am having htc One with following details.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HC4BRYC15296
(bootloader) imei: 355587426879862
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B6****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Please help me now, I want to update with oreo and when I tempered with device, it was having Kit Kat 4.4.4, It is perfectly unlocked, having root access. TWRP version 3.0 is also installed on it, suggest me the best soft application to get my phone back in working position.
Some of the pictures are here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These are the screenshots i obtained, Please suggest me the procedure that must be easy to follow, considering my limitations of IT advanced knowledge.
Thank You. I am now waiting for you response.
You need these steps :
1. Change your current modelid: 0P6B6**** to 0P6B10000
How-to read this - https://forum.xda-developers.com/showthread.php?t=2708581
If you can boot to recovery (not sure twrp 3.0 can work on KitKat, if can't install twrp 2.8.3.0)
Then run command adb shell
Skip command su
Then the rest for Europe MID codes
2. Install RUU - https://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
There is a shortcut way with flashing firmware only but seems you're new to this, installing RUU is a better option
3. Install twrp 3.2.1.0
4. Install your Oreo ROM
ckpv5 said:
You need these steps :
1. Change your current modelid: 0P6B6**** to 0P6B10000
How-to read this - https://forum.xda-developers.com/showthread.php?t=2708581
If you can boot to recovery (not sure twrp 3.0 can work on KitKat, if can't install twrp 2.8.3.0)
Then run command adb shell
Skip command su
Then the rest for Europe MID codes
2. Install RUU - https://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
There is a shortcut way with flashing firmware only but seems you're new to this, installing RUU is a better option
3. Install twrp 3.2.1.0
4. Install your Oreo ROM
Click to expand...
Click to collapse
thanks brother, I did in similar way as you instructed me but I am unable to boot my htc, it is now stuck in bootloop, I installed 14.1 image, but It is not working properly, My phone is rebooting again and again. Please help me further, Now you can suggest me some advanced method as well. I will try to move after, Please give me bootable Image. I am waiting for your response.
Post current fastboot getvar all result then we'll see whether it is correctly done.
Step 2, install RUU .. do you manage this ?
ckpv5 said:
Post current fastboot getvar all result then we'll see whether it is correctly done.
Step 2, install RUU .. do you manage this ?
Click to expand...
Click to collapse
Here is the other thing latest getvar info...
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HC4BRYC15296
(bootloader) imei: 355587426879862
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Please Help me, My phone is currently off. Please help me.
Your getvar show you successfully changed MID as said in step 1.
But you skip step 2 and install lineage 14.1, this won't work & explained the bootloop.
Do step 2 then post fastboot getvar all. Once ok then only do step 3 & later step 4 install lineage OS
ckpv5 said:
Your getvar show you successfully changed MID as said in step 1.
But you skip step 2 and install lineage 14.1, this won't work & explained the bootloop.
Do step 2 then post fastboot getvar all. Once ok then only do step 3 & later step 4 install lineage OS
Click to expand...
Click to collapse
thanks My phone is working with Marshmallow. I want to move on oreo.......How I can move on to it, and please suggest me a best rom thanks.
Follow step 3 then step 4 as you completed step 1 & 2.
I can't suggest a best rom as I usually on my own customized ROM, but now I'm on Oreo LOS 15.1 and there's only one Oreo LOS 15.1 that openly public release for now.
ahmad04464 said:
thanks My phone is working with Marshmallow. I want to move on oreo.......How I can move on to it, and please suggest me a best rom thanks.
Click to expand...
Click to collapse
ckpv5 graciously gave you all the steps required to update the firmware and install an Oreo ROM. Why are you skipping steps? Just follow them all. He wouldn't post it, if you didn't need to do it. Why would you only follow half the advice given to you, and expect it to work properly?
Related
Q&A for HTC One M8 firmware collection for different CID/MID | 3.28.401.6
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
cant update firmware 3.28.401.6
cant seem to figure it out what am i doing wrong i have htc m8 S-on cant get s-off everytime i try it says htc patched it using firewater. so i read up as much as i could downloaded the file 3.28.401.6 try to install but i get an error which i found out means my cid an mid dont match my current CID IS TMOB010 AND MY MD IS 0P6B13000 im running on ARHD 11.2 and i need the firmware installed before i jump to arhd 20.1
Not sure which firmware to flash
Hi,
Currently I have a At&T HTC One M8 with the following
Android Version 4.4.3
Rom Version 2.22.401.5
Software Number Android revolution HD 11.1
I wanted to flash the newest ARHD found here http://forum.xda-developers.com/showthread.php?t=2694917
But I saw a few comments saying the WiFi doesn't work unless you have the newest firmware which is 3.28.401.6
So I went to the HTC One M8 firmware collection thread here http://forum.xda-developers.com/showthread.php?t=2696282
My Phone is S-Off and the CID is the SuperCID 11111111, but when I ran the command "fastboot getvar all" the version-main: was blank as shown below
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.14.21331931.LA21G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:xxxxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxx
(bootloader) imei2:xxxxxxxxxxxxxxx
(bootloader) meid:xxxxxxxxxxxxxxxxxxx
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: 11111111
Click to expand...
Click to collapse
Is there a reason it is blank?
I was a little concerned whether or not it was safe for me to flash the firmware 3.28.401.6
Thanks for for any help you can provide.
@mike1986. Need an help. I guess I have bricked my phone badly. My phone is S-on and 4.4.3 running on it as base and I had viper Rom on it. I first flashed the stock recovery and then relocked the boot loader and flashed the latest firmware 3.28.401.6.
Now the phone isn't booting. It has stuck on this screen and it has been 30 mins now and the phone still haven't booted.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please help[emoji22]
I am not able to reboot, put it in recovery or reboot to boot loader.
cardozclive said:
@mike1986. Need an help. I guess I have bricked my phone badly. My phone is S-on and 4.4.3 running on it as base and I had viper Rom on it. I first flashed the stock recovery and then relocked the boot loader and flashed the latest firmware 3.28.401.6.
Now the phone isn't booting. It has stuck on this screen and it has been 30 mins now and the phone still haven't booted.
Please help[emoji22]
I am not able to reboot, put it in recovery or reboot to boot loader.
Click to expand...
Click to collapse
What Rom are you trying to boot into? 4.4.3 or 4.4.4?
You should be able to boot to bootloader. Hold power then immediately volume up and downat same time. When phone powers off release the volume up button and it should boot to boot loader.
Sent from my HTC One_M8 using Xparent Blue Tapatalk 2
On the first page it says that flashing these firmware zips will flash a new recovery. Then you have to reflash a custom recovery afterwards. My computers down for the moment, so can I just rename the recovery image to 0P6BIMG and flash that way ? I'd really like to give sense another try...
---------- Post added at 09:13 AM ---------- Previous post was at 09:12 AM ----------
jxcorex28 said:
On the first page it says that flashing these firmware zips will flash a new recovery. Then you have to reflash a custom recovery afterwards. My computers down for the moment, so can I just rename the recovery image to 0P6BIMG and flash that way ? I'd really like to give sense another try...
Click to expand...
Click to collapse
I'm not sure if this is important to anyone but I'm s-off, rooted, and I have AT&T with superCID
my cid is J15
and I want to install this software how that
omarsoos said:
my cid is J15
and I want to install this software how that
Click to expand...
Click to collapse
sorry Iam wrong
My Cid is
htc__044
Rolando88 said:
Mike or anyone please what do i need to download for the New firmware my main version is 1.12.401.17 bootloader 3.16.0.0000
Cid htc_e11
Click to expand...
Click to collapse
Please help me
firmware
cid = T-MOB010
mid = 0P6B13000
with S-On
- What firmware should I d/l to update to the latest?
Firmware download HTC One M8
Hi Mike,
As I did not read correctly I did not flash the newest Firmware before flashing HD-One_m8_21.0.zip.
Now I try to download the 3.28.401.7.zip from your db_mirror\firmware site, but after download I get the message: "invalid zip".
Any idea?
Tnx, Chris
Same problem
I need help!
I'm s-off
i've locked the bootloader with oem lock command,
flashed the new firmware,
but now the phone stuck on htc white loading screen after playng boot-up sound.
I can go to bootloader but what then?
what i've to do?
thanks in advance
arhd 21 wifi not working
Just updated to arhd 21 WIFI now just hangs then shuts off
Any insights? Greatly appreciate any help.
Unlocked
S-OFF
CID: CW__001
Firmware: 3.28.401.7
poachstevens said:
Just updated to arhd 21 WIFI now just hangs then shuts off
Any insights? Greatly appreciate any help.
Unlocked
S-OFF
CID: CW__001
Firmware: 3.28.401.7
Click to expand...
Click to collapse
Are you sure that's your cid? Should be CWS__001. They're 8 characters. Is that a typo in your post, or do you really have that cid in phone?
jollywhitefoot said:
Are you sure that's your cid? Should be CWS__001. They're 8 characters. Is that a typo in your post, or do you really have that cid in phone?
Click to expand...
Click to collapse
Sorry yes, that was a typo CWS__001
How do I restore with s on on T-Mobile m8
3.28.401.7 Firmware
Hi
I was trying to flash the 3.28.401.7 firmware today, but i did get some errors.
My Htc m8 is S-OFF and have CID HTC__Y13. What am I doing wrong?
(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-2,0
(bootloader) [RUU]UZ,sbl1-2,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) current_image_number=6
(bootloader) start image[sbl1-3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-3,0
(bootloader) [RUU]UZ,sbl1-3,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) current_image_number=7
(bootloader) start image[sbl1-4] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-4,0
(bootloader) [RUU]UZ,sbl1-4,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) current_image_number=8
C:\sdk>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.21331147A1.19_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
HTC One M8
When is gonna be an update for the Firmware for the M8 which are not in the list above?
having trouble flashing firmware from 2.22.401.5 to 3.28.401.7 or 3.29.401
Hey all, having trouble flashing either of the above firmware (3.28.401.7 or 3.29.401). Everytime I fastboot to RUU and try flashing, it fails. Any ideas as to what I'm missing? Let me know if I should provide more info.
HTC One M8
RELOCKED
S-OFF
cid - 11111111
HBOOT - 3.16
android - 4.4.3
firmware - 2.22.401.5
ARHD - 11.2
steps:
fastboot oem lock
fastboot oem rebootRUU - phone reboots to RUU screen
fastboot flash zip firmware.zip
fails everytime
version 0.5 and hbootpreupdate: 11
Hi all
I flashed 3.28.401.9 firmware last night and everything is OK. But i can't figure out why I'm still on version 0.5 and hbootpreupdate: 11
Is ther anyone that can help me?
C:\sdk>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
C:\sdk>
Hello I just bought an m8 on aliexpress (took a while to get to me...) and when I first turned it on I noticed that it was already rooted (it is refurbished and they send it that way. It is new but rooted) and is on android 4.4.4, pretty old. There are a lot of improvements with the updates from htc but when I search for the option on the settings it is not there, it should, but it isn't there. So, I want to get it updated with the RUU which I think shoud be the safest option (I don't really care to lose root) but the thing is I don't really know what RUU I am supposed to get! The phone is supposed to be unlocked. This is the information I got with "getvar all"
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.0926
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.31.512.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT439SF00963
(bootloader) imei2: Not Support
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B20000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 2e9b7c51
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
I don't really know what was done to the phone, and actually my main reason to do this is to update it to lollipop and be able to keep upgrading. If someone can help me with that I would really apreciate it!
First of all it's a verizon phone, secondly it's S-Off and has SuperCID already, interesting.
luckily for you, you just have to download this https://www.androidfilehost.com/?fid=95916177934538714
if you want non verizon rom e.g no bloat and crap like that, I'll help you further, but first you must run the RUU.
http://forum.xda-developers.com/ver...zip-ruu-m8vzw-5-0-1-s-off-onlynewest-t3047103
more info here about the whole process, it's very simple.
Good luck, have fun.
hello guys,
i'm in the same issue and i try to upgrade the firmware yesterday but the new build number is only show everywhere exept that my android version is still 4.4.2.
thank you in advance
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.401.10
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B1****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
hb4spooks said:
hello guys,
i'm in the same issue and i try to upgrade the firmware yesterday but the new build number is only show everywhere exept that my android version is still 4.4.2.
thank you in advance
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-main: 4.16.401.10
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) modelid: 0P6B1****
(bootloader) cidnum: 11111111
Click to expand...
Click to collapse
Why do you hide an inportant info modelid ? You should remove serial & imei no as they are sensitive info.
Flashing firmware alone won't upgrade your OS.
Install 4.16.401.10 RUU to upgrade your OS (but this will wipe everything on internal storage) - get it here : http://androidruu.com/?developer=M8
Or you can use 4.16.401.10 nandroid backup to upgrade the OS (this will not wipe your internal storage) - get it from link in my signature
i didn't hide nothing
ckpv5 said:
Why do you hide an inportant info modelid ? You should remove serial & imei no as they are sensitive info.
Flashing firmware alone won't upgrade your OS.
Install 4.16.401.10 RUU to upgrade your OS (but this will wipe everything on internal storage) - get it here :
Or you can use 4.16.401.10 nandroid backup to upgrade the OS (this will not wipe your internal storage) - get it from link in my signature
Click to expand...
Click to collapse
the phone comes like that this is the problem with aliexpressdotcom refubished phones .... i just copy and past everything, i'll try the .exe methode later because i'm on ubuntu and tell you if it works
Update Help!
I downloaded latest firmware from and ran the setup on Windows 10. Now I am stuck on "Updating....(0/7) Sending.................." My phone is showing just HTC logo with black background. Please help!
itsuzairahmad said:
I downloaded latest firmware from and ran the setup on Windows 10. Now I am stuck on "Updating....(0/7) Sending.................." My phone is showing just HTC logo with black background. Please help!
Click to expand...
Click to collapse
To run a RUU .. you need USB2.0 and latest HTC USB driver installed. If not sure, download HTC Sync Manager - http://www.htc.com/us/support/software/htc-sync-manager.aspx
install it as it will install the latest HTC USB driver then uninstall the HTC Sync Manager but leave the driver.
Also check whether your Win 10 has these 2008 C++ installed. You may need them too.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ckpv5 said:
To run a RUU .. you need USB2.0 and latest HTC USB driver installed. If not sure, download HTC Sync Manager
install it as it will install the latest HTC USB driver then uninstall the HTC Sync Manager but leave the driver.
Also check whether your Win 10 has these 2008 C++ installed. You may need them too.
View attachment 3502770
Click to expand...
Click to collapse
Thank you for taking the time to reply. Turned out I was installing the wrong update. I am using Verizon version in Pakistan and it can only be updated in the US by the carrier. Would appreciate if anybody helps regarding this.
thank you
ckpv5 said:
Why do you hide an inportant info modelid ? You should remove serial & imei no as they are sensitive info.
Flashing firmware alone won't upgrade your OS.
Install 4.16.401.10 RUU to upgrade your OS (but this will wipe everything on internal storage) - get it here :
Or you can use 4.16.401.10 nandroid backup to upgrade the OS (this will not wipe your internal storage) - get it from link in my signature
Click to expand...
Click to collapse
It works fine... I just got some issues with the radio ... I wonder if it because I changed my SIM card then it could come from the provider
Hi everyone,
So my HTC one M8 was rooted with TWRP recovery. It was running Android 5.0 I think. I got an OTA update but I was not able to update it because of TWRP. I wanted the update so bad and I searched on Youtube to know how to update the software. I found a video and I followed these steps.
1 - Replace custom recovery with stock recovery
2 - Process OTA Update
3 - Replace stock recovery with custom recovery
However, when I replaced the custom recovery with the stock recovery, I downloaded the OTA update and updated it. But after the update completed, the device never booted up. It shows the HTC logo then it goes black! (The screen is still on, but black!) Have I bricked the phone? How Can I fix it please!
PS. Here is the video I watched www.youtube.com/watch?v=PPPT5J8xG6w
Rezhwscene said:
Hi everyone,
So my HTC one M8 was rooted with TWRP recovery. It was running Android 5.0 I think. I got an OTA update but I was not able to update it because of TWRP. I wanted the update so bad and I searched on Youtube to know how to update the software. I found a video and I followed these steps.
1 - Replace custom recovery with stock recovery
2 - Process OTA Update
3 - Replace stock recovery with custom recovery
However, when I replaced the custom recovery with the stock recovery, I downloaded the OTA update and updated it. But after the update completed, the device never booted up. It shows the HTC logo then it goes black! (The screen is still on, but black!) Have I bricked the phone? How Can I fix it please!
PS. Here is the video I watched www.youtube.com/watch?v=PPPT5J8xG6w
Click to expand...
Click to collapse
That video is nonsense. There is a blatant mistake at 6.44 and the knob doesn't see it. You need to go back to stock first, then take the OTA.
Einwod said:
That video is nonsense. There is a blatant mistake at 6.44 and the knob doesn't see it. You need to go back to stock first, then take the OTA.
Click to expand...
Click to collapse
Thanks for the reply! But please, how can I fix my device now? I don't have TWRP anymore! But I can access the Stock revovery. What should I do? :'(
Rezhwscene said:
Thanks for the reply! But please, how can I fix my device now? I don't have TWRP anymore! But I can access the Stock revovery. What should I do? :'(
Click to expand...
Click to collapse
Go into fastboot and open a command prompt. Type in fastboot getvar all and post the output here. Remove your serial and IMEI numbers before you post. Hopefully we can get you back to stock.
Einwod said:
Go into fastboot and open a command prompt. Type in fastboot getvar all and post the output here. Remove your serial and IMEI numbers before you post. Hopefully we can get you back to stock.
Click to expand...
Click to collapse
Okay, before I see your respond I did a stupid thing! I flashed TWRP and I wanted to flash stock ROM and I followed these instructions from this website
http://www.carbontesla.com/2015/01/htc-one-m8-4-16-401-10-stock-lollipop-ruu-0p6bimg/
But when I want to flash the rom its says "target reported max download size of 1826414592 bytes error: cannot load 'L50RUU.zip'"
Anyway, now my device is " Relocked" and when I type fastboot getvar I get this>>>>
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What should I do?
Rezhwscene said:
Okay, before I see your respond I did a stupid thing! I flashed TWRP and I wanted to flash stock ROM and I followed these instructions from this website
http://www.carbontesla.com/2015/01/htc-one-m8-4-16-401-10-stock-lollipop-ruu-0p6bimg/
But when I want to flash the rom its says "target reported max download size of 1826414592 bytes error: cannot load 'L50RUU.zip'"
Anyway, now my device is " Relocked" and when I type fastboot getvar I get this>>>>
What should I do?
Click to expand...
Click to collapse
First unlock the bootloader again. TWRP you need and the command is: fastboot getvar all Check your messages also.
Einwod said:
First unlock the bootloader again. TWRP you need and the command is: fastboot getvar all Check your messages also.
Click to expand...
Click to collapse
Okay I'm a goddamn noob! How to unlock the bootloader again? this command " fastboot oem unlock" does not work!
AND here is the result!
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.401.13
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__016
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: f063fb42
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.192s
Rezhwscene said:
Okay I'm a goddamn noob! How to unlock the bootloader again? this command " fastboot oem unlock" does not work!
AND here is the result!
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.401.13
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__016
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: f063fb42
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.192s
Click to expand...
Click to collapse
Luckily you have a WWE device. Download this RUU and run it from Windows. Make sure you have HTC drivers installed. The easy way to do that is to install HTC Sync and then uninstall it. The HTC drivers will be left behind. That will take you to stock 4.16.401.10. You will then receive the update to 13.
Einwod said:
Luckily you have a WWE device. Download this RUU and run it from Windows. Make sure you have HTC drivers installed. The easy way to do that is to install HTC Sync and then uninstall it. The HTC drivers will be left behind. That will take you to stock 4.16.401.10. You will then receive the update to 13.
Click to expand...
Click to collapse
I owe you my life man! Thanks for responding quickly. Anyway, Should I unlock the bootloader then run the .exe file?
Rezhwscene said:
I owe you my life man! Thanks for responding quickly. Anyway, Should I unlock the bootloader then run the .exe file?
Click to expand...
Click to collapse
No, the bootloader needs to be relocked/locked for the RUU.exe to work. It should work from fastboot mode. If it doesn't, I'll be on again tomorrow.
Einwod said:
Luckily you have a WWE device. Download this RUU and run it from Windows. Make sure you have HTC drivers installed. The easy way to do that is to install HTC Sync and then uninstall it. The HTC drivers will be left behind. That will take you to stock 4.16.401.10. You will then receive the update to 13.
Click to expand...
Click to collapse
OH MY GOD IT WORKED! I seriously don't know how to thank you or how to repay you! Thank you a million! I don't have a credit card to donate because you deserve it! But I'll get one soon, Promise!!
Rezhwscene said:
OH MY GOD IT WORKED! I seriously don't know how to thank you or how to repay you! Thank you a million! I don't have a credit card to donate because you deserve it! But I'll get one soon, Promise!!
Click to expand...
Click to collapse
Glad everything all worked out. MM update should be out any day now. Enjoy.
Moin Guys
Firstyl: Sorry, i wasn't here or a Long time so im not up to date and like a dummy again
My Problem:
I have a HTC One M8 Dual Sim (unbranded). I Rooted it and flashed twrp on it. 2 days ago i was so dumb and tried a ota update. to dumb, that it won't work with twrp on it. So i flashed a stock recovery and tried to update. afterwards there was just the Htc logo for a Long time. so i flashed twrp back on it and restored my last backup. flashed stock recovery again and tried again. but now in the update Screen theres just a red ! (look at the Picture downside). i cant update it anymore.
My Question:
I googled and searched for the last 2 days, but i wasn't able to find a good solution. I want to go back to stock as far as possible. But i cant find all ressources i Need. i already took this recovery over here: http://forum.xda-developers.com/htc-one-m8/help/htc-one-m8-dual-sim-european-version-t2816991
i need a Htc one m8 DUAL SIM stock recovery and OS. Can i go to androd 6.0 directly? with a ota for it?
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.30336021.13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.30.401.18
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: -----
(bootloader) imei: -----
(bootloader) imei2: -----
(bootloader) meid: 00000000000000
(bootloader) product: m8_dugl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B64000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 1cd7c7b4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
can ou guys give me some links, that i finaly can make the update on marshmellow and getting my phone running again? I already tried it with this tutorial: http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
Same error... I also tried with locked bootloader... Same error
Sorry for dummy thread!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Greetings, Aivilon
Hi Guys
I made it. I just visited http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860 and downloaded nandroid Backup 6.16.401.101_ckpv5.zip and the Bootloader for it.
After a Backup from the running System i restored the nand from ckpv5 (Thank you at this part for your collection!!!!)
It runs. Didn't know that this will work. thought i have to do the ota that anything gets an update. but till now anything runs... :laugh:
The MM ROM runs is correct but your bootloader is most probably is on the lower version.
Put fastboot getvar all result again ... maybe I can help to update your firmware too if needed
Followed the (excellent) guide step by step but am stuck at step 12
When I reboot it says "your phone is encrypted"
Obviously I have no idea of the code. I have factory reset again but same issue. I am now at minus 3 decryption attempts (in other words I have tried 33 times)
Any idea how to disable encryption ?
Simply_S said:
Followed the (excellent) guide step by step but am stuck at step 12
When I reboot it says "your phone is encrypted"
Obviously I have no idea of the code. I have factory reset again but same issue. I am now at minus 3 decryption attempts (in other words I have tried 33 times)
Any idea how to disable encryption ?
Click to expand...
Click to collapse
OK, solved my own problem thanks to Gary Maskell : https://www.youtube.com/watch?v=HQM6KIDr4-k
I needed to do a full format through TWRP at some point in the process. Since I was wiping everything anyway, I wasn't concerned about data loss. Should you need to do the same, please ensure that you have saved everything you need first
Big thanks to @ckpv5 and @avilon as well as to Gary
Simply_S said:
OK, solved my own problem thanks to Gary Maskell : https://www.youtube.com/watch?v=HQM6KIDr4-k
I needed to do a full format through TWRP at some point in the process. Since I was wiping everything anyway, I wasn't concerned about data loss. Should you need to do the same, please ensure that you have saved everything you need first
Big thanks to @ckpv5 and @avilon as well as to Gary
Click to expand...
Click to collapse
Mine are as follows;
oot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.30336021.13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.30.401.18
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT491WM01216
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid: 00000000000000
(bootloader) product: m8_dugl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B64000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 1cd7c7b4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.064s
this happened about the OTA update this morning.
installed twrp-2.8.7.0, instead of going to recovery it takes me back to bootloader.
Can't seems to find nano backup for 4.30.401.18.
any help will be appreciated.
Help needed to update HTC ONE M8 DUAL SIM
I want to update my rooted htc one m8 dual sim international unlocked version to marshmallow. I have unlocked my bootloader. Pls give me step by step tutorial.
Help formatting my htc one m8 dual sim to official stock rom
Hi, Its been awhile since I have flashed a phone so I am totally lost, I bought an HTC one M8 Dual sim unlocked, I think it was unlocked via boot loader by the seller, but due to that fact I am unable to install OTA updates, I would like to restore to the official stock rom for this phone, could someone please assist me. Thank You.
Hi All,
Can't get out of the booting loop. I tried flashing new ROM but it throw following error "Device halted Due to Large Image Update Fail Done" when i try to flash it from the SD card. I also tried flashing from the CMD but it says "Invalid sparse file format at header mgi".
While flashing the ROM from CMD, I re-locked the oem and and now its showing s-on status.
Device details are below.
A51_DTUL PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-01.01.010_U10305041_08.01.50512
OS-2.10.720.6
EMMC-boot 2048MB OC.
Please Help!!
You must provide more information.
Here's instruction:
1. Download ADB and FASTBOOT if you don't have these. You can find it here https://androiddatahost.com/789ju
2. Boot into fastboot. Connect your device to pc and check if it is on FASTBOOT USB mode
3. Go to your ADB and FASTBOOT Folder where you downloaded and extracted the files
4. Open CMD there and type: "fastboot getvar all" without quotation. Hit Enter.
5. Copy all the information from CMD and paste it here
nazmul0046 said:
You must provide more information.
Here's instruction:
1. Download ADB and FASTBOOT if you don't have these. You can find it here https://androiddatahost.com/789ju
2. Boot into fastboot. Connect your device to pc and check if it is on FASTBOOT USB mode
3. Go to your ADB and FASTBOOT Folder where you downloaded and extracted the files
4. Open CMD there and type: "fastboot getvar all" without quotation. Hit Enter.
5. Copy all the information from CMD and paste it here
Click to expand...
Click to collapse
Here is the Info fro from the "fastboot getvar all" command:-
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 01.01.010_U10305041_08.01.50512
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.10.720.6
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH4AYYC02371
(bootloader) imei: 354920065404015
(bootloader) imei2: 354920065404023
(bootloader) meid: 00000000000000
(bootloader) product: a51_dtul
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PFJ10000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: da038a09
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name:
Thank
Download & Flash this RUU:
https://mega.nz/#!0ww2WbYI!bTJ-XmEZem9Et-Xekysw1I00rCkXWEp0SpN5x5It1Qg
Hope it will fix this problem.
Good Luck!
nazmul0046 said:
Download & Flash this RUU:
https://mega.nz/#!0ww2WbYI!bTJ-XmEZem9Et-Xekysw1I00rCkXWEp0SpN5x5It1Qg
Hope it will fix this problem.
Good Luck!
Click to expand...
Click to collapse
Thanks Man!!, But I am not able to download this file from Mega as it is asking for Premium Membership, Can You help me!!
Here, I've uploaded this file temporarily in Google Drive.
Link: https://drive.google.com/open?id=0B34CF2p0brtAY2U2UzFWTU53ZFU
Once you've downloaded the file, inform me here. I'll remove it
nazmul0046 said:
Here, I've uploaded this file temporarily in Google Drive.
Link: https://drive.google.com/open?id=0B34CF2p0brtAY2U2UzFWTU53ZFU
Once you've downloaded the file, inform me here. I'll remove it
Click to expand...
Click to collapse
Thanks Man, Downloaded the File, You can Remove it now.!!
Yayyy!!, Got it work!!
Thanks a lot!!
Did that solved your problem?
nazmul0046 said:
Did that solved your problem?
Click to expand...
Click to collapse
Yes
nazmul0046 said:
You must provide more information.
Here's instruction:
1. Download ADB and FASTBOOT if you don't have these. You can find it here https://androiddatahost.com/789ju
2. Boot into fastboot. Connect your device to pc and check if it is on FASTBOOT USB mode
3. Go to your ADB and FASTBOOT Folder where you downloaded and extracted the files
4. Open CMD there and type: "fastboot getvar all" without quotation. Hit Enter.
5. Copy all the information from CMD and paste it here
Click to expand...
Click to collapse
Bro I'm also facing same isssue . Please tell me right solution.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hi i'm also facing same problem
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 01.01.010_U10305041_08.01.51015
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT4AJYC03721
(bootloader) imei: 35492XXXXXXXXXX
(bootloader) imei2: 35492XXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: a51_dtul
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PFJ10000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 9cf29e72
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name:
Please help me
whoisfree said:
hi i'm also facing same problem
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 01.01.010_U10305041_08.01.51015
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT4AJYC03721
(bootloader) imei: 35492XXXXXXXXXX
(bootloader) imei2: 35492XXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: a51_dtul
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PFJ10000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 9cf29e72
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name:
Please help me
Click to expand...
Click to collapse
Follow the previous instructions. Problem will be solved.
And RUU link: https://mega.nz/#!0ww2WbYI!bTJ-XmEZem9Et-Xekysw1I00rCkXWEp0SpN5x5It1Qg
i tried your method's but get this error
C:\HTC_OS>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ -0.000s]
finished. total time: -0.000s
C:\HTC_OS>fastboot flash zip 0PFJIMG_A51_DTUL_M60_DESIRE_SENSE70_MR_hTC_Asia_In dia_3.17.720.3_Radio_01.01.010_U10305041_08.01.510 15_release_478672_combined_signed_2_4.zip
load_file: could not allocate 1687633592 bytes
error: cannot load '0PFJIMG_A51_DTUL_M60_DESIRE_SENSE70_MR_hTC_Asia_In dia_3.17.720.3_Radio_01.01.010_U10305041_08.01.510 15_release_478672_combined_signed_2_4.zip'
C:\HTC_OS>
---------- Post added at 02:10 PM ---------- Previous post was at 02:04 PM ----------
i made file name short "0PFJIMG.zip"
C:\HTC_OS>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ -0.000s]
finished. total time: -0.000s
C:\HTC_OS>fastboot flash zip 0PFJIMG.zip
load_file: could not allocate 1687633592 bytes
error: cannot load '0PFJIMG.zip'
C:\HTC_OS>
but same error
whoisfree said:
i tried your method's but get this error
C:\HTC_OS>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ -0.000s]
finished. total time: -0.000s
C:\HTC_OS>fastboot flash zip 0PFJIMG_A51_DTUL_M60_DESIRE_SENSE70_MR_hTC_Asia_In dia_3.17.720.3_Radio_01.01.010_U10305041_08.01.510 15_release_478672_combined_signed_2_4.zip
load_file: could not allocate 1687633592 bytes
error: cannot load '0PFJIMG_A51_DTUL_M60_DESIRE_SENSE70_MR_hTC_Asia_In dia_3.17.720.3_Radio_01.01.010_U10305041_08.01.510 15_release_478672_combined_signed_2_4.zip'
C:\HTC_OS>
---------- Post added at 02:10 PM ---------- Previous post was at 02:04 PM ----------
i made file name short "0PFJIMG.zip"
C:\HTC_OS>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ -0.000s]
finished. total time: -0.000s
C:\HTC_OS>fastboot flash zip 0PFJIMG.zip
load_file: could not allocate 1687633592 bytes
error: cannot load '0PFJIMG.zip'
C:\HTC_OS>
but same error
Click to expand...
Click to collapse
1. Rename the file you downloaded to '0PFJIMG.zip' without quotation. (First letter is Zero, not O)
2. Copy the file to your External memory card.
3. Boot the device into Bootloader. The device will do the rest of the work
4. If the device asks for permission, Press Yes (Power Button)
To boot into bootloader:
Turn off your phone.
Hold down Volume Down + Power button.
Release the Power button when device starts and continue to hold the Volume Down key until you enter into the bootloader.
after re locking boot-loader
every thing is installed from SD card after Reboot , done FACTORY RESET
now phone showing Android is Starting
Optimizing app xx of 88
and get reboot again and again, now it is not booting started loop of rebooting
This was the main reason after OTA update of 6.0 OS my phone has rebooting problem stared now again i came to same position
i tried so many OS from STOCK 5.11 to CM12 and other using Recovery tools and PC software
HTC Service Center charge me 350 Rs but not able to do any thing .. simply say your phones board is dear
what do i do can any one know how to install Linux in this device its HTC 820 G+ duel sim Indian version
whoisfree said:
after re locking boot-loader
every thing is installed from SD card after Reboot , done FACTORY RESET
now phone showing Android is Starting
Optimizing app xx of 88
and get reboot again and again, now it is not booting started loop of rebooting
This was the main reason after OTA update of 6.0 OS my phone has rebooting problem stared now again i came to same position
i tried so many OS from STOCK 5.11 to CM12 and other using Recovery tools and PC software
HTC Service Center charge me 350 Rs but not able to do any thing .. simply say your phones board is dear
what do i do can any one know how to install Linux in this device its HTC 820 G+ duel sim Indian version
Click to expand...
Click to collapse
Unlock your bootloader. S-OFF & SuperCID your device. Your firmware files may be corrupted. Then try installing the RUU. It will work!
i have got same exact problem also i tried to flash stock rom with no luck i really hope you can help me i do appreciate your answer
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 01.01.010_U10305041_08.01.50512
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.10.401.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: CC53NYC02396
(bootloader) imei: 357586061141773
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: a51_ul
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PFJ40000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: da038a09
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name: 1001
all: Done!
How to S-Off and SuperCID
nazmul0046 said:
Unlock your bootloader. S-OFF & SuperCID your device. Your firmware files may be corrupted. Then try installing the RUU. It will work!
Click to expand...
Click to collapse
please help me how to do S-Off and SuperCID, Firmware means android OS or Flash please tell me
basemddd said:
i have got same exact problem also i tried to flash stock rom with no luck i really hope you can help me i do appreciate your answer
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 01.01.010_U10305041_08.01.50512
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.10.401.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: CC53NYC02396
(bootloader) imei: 357586061141773
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: a51_ul
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PFJ40000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: da038a09
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name: 1001
all: Done!
Click to expand...
Click to collapse
You already have S-OFF and SuperCID. So, you will have no problem flashing a RUU or a custom ROM. To flash a marsmallow RUU follow instruction provided by @vuk1963 from here: https://forum.xda-developers.com/desire-820/help/method-flash-stock-firmware-6-0-1-htc-t3441649
---------- Post added at 11:40 AM ---------- Previous post was at 11:32 AM ----------
whoisfree said:
please help me how to do S-Off and SuperCID, Firmware means android OS or Flash please tell me
Click to expand...
Click to collapse
To S-OFF and SuperCID your device:
You can use sunshine S-OFF tool from http://theroot.ninja which requires 25$ via In-app Purchases & Out-of-app Purchases.
Or you can buy xtc2clip form www.xtc2clip.org which now requires 115$ .
I'm suggesting, Search for a local phone repair shop that uses xtc2clip to S-OFF devices. It is the cheapest way. Costs only 5-10$
Good Luck!
nazmul0046 said:
You already have S-OFF and SuperCID. So, you will have no problem flashing a RUU or a custom ROM. To flash a marsmallow RUU follow instruction provided by @vuk1963 from here: https://forum.xda-developers.com/desire-820/help/method-flash-stock-firmware-6-0-1-htc-t3441649
---------- Post added at 11:40 AM ---------- Previous post was at 11:32 AM ----------
To S-OFF and SuperCID your device:
You can use sunshine S-OFF tool from http://theroot.ninja which requires 25$ via In-app Purchases & Out-of-app Purchases.
Or you can buy xtc2clip form www.xtc2clip.org which now requires 115$ .
I'm suggesting, Search for a local phone repair shop that uses xtc2clip to S-OFF devices. It is the cheapest way. Costs only 5-10$
Good Luck!
Click to expand...
Click to collapse
i tried the method that you have mentioned but unfortunately when i try to flash it says halted due to large amout of data something like that
thanks for ur help