Develop Bugs

[Q&A] HTC One M8 firmware collection for different CID/MID | 3.28.401.6

Q&A for HTC One M8 firmware collection for different CID/MID | 3.28.401.6
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

cant update firmware 3.28.401.6
cant seem to figure it out what am i doing wrong i have htc m8 S-on cant get s-off everytime i try it says htc patched it using firewater. so i read up as much as i could downloaded the file 3.28.401.6 try to install but i get an error which i found out means my cid an mid dont match my current CID IS TMOB010 AND MY MD IS 0P6B13000 im running on ARHD 11.2 and i need the firmware installed before i jump to arhd 20.1

Not sure which firmware to flash
Hi,
Currently I have a At&T HTC One M8 with the following
Android Version 4.4.3
Rom Version 2.22.401.5
Software Number Android revolution HD 11.1
I wanted to flash the newest ARHD found here http://forum.xda-developers.com/showthread.php?t=2694917
But I saw a few comments saying the WiFi doesn't work unless you have the newest firmware which is 3.28.401.6
So I went to the HTC One M8 firmware collection thread here http://forum.xda-developers.com/showthread.php?t=2696282
My Phone is S-Off and the CID is the SuperCID 11111111, but when I ran the command "fastboot getvar all" the version-main: was blank as shown below
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.14.21331931.LA21G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:xxxxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxx
(bootloader) imei2:xxxxxxxxxxxxxxx
(bootloader) meid:xxxxxxxxxxxxxxxxxxx
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: 11111111
Click to expand...
Click to collapse
Is there a reason it is blank?
I was a little concerned whether or not it was safe for me to flash the firmware 3.28.401.6
Thanks for for any help you can provide.

@mike1986. Need an help. I guess I have bricked my phone badly. My phone is S-on and 4.4.3 running on it as base and I had viper Rom on it. I first flashed the stock recovery and then relocked the boot loader and flashed the latest firmware 3.28.401.6.
Now the phone isn't booting. It has stuck on this screen and it has been 30 mins now and the phone still haven't booted.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please help[emoji22]
I am not able to reboot, put it in recovery or reboot to boot loader.

cardozclive said:
@mike1986. Need an help. I guess I have bricked my phone badly. My phone is S-on and 4.4.3 running on it as base and I had viper Rom on it. I first flashed the stock recovery and then relocked the boot loader and flashed the latest firmware 3.28.401.6.
Now the phone isn't booting. It has stuck on this screen and it has been 30 mins now and the phone still haven't booted.
Please help[emoji22]
I am not able to reboot, put it in recovery or reboot to boot loader.
Click to expand...
Click to collapse
What Rom are you trying to boot into? 4.4.3 or 4.4.4?
You should be able to boot to bootloader. Hold power then immediately volume up and downat same time. When phone powers off release the volume up button and it should boot to boot loader.
Sent from my HTC One_M8 using Xparent Blue Tapatalk 2

On the first page it says that flashing these firmware zips will flash a new recovery. Then you have to reflash a custom recovery afterwards. My computers down for the moment, so can I just rename the recovery image to 0P6BIMG and flash that way ? I'd really like to give sense another try...
---------- Post added at 09:13 AM ---------- Previous post was at 09:12 AM ----------
jxcorex28 said:
On the first page it says that flashing these firmware zips will flash a new recovery. Then you have to reflash a custom recovery afterwards. My computers down for the moment, so can I just rename the recovery image to 0P6BIMG and flash that way ? I'd really like to give sense another try...
Click to expand...
Click to collapse
I'm not sure if this is important to anyone but I'm s-off, rooted, and I have AT&T with superCID

my cid is J15
and I want to install this software how that

omarsoos said:
my cid is J15
and I want to install this software how that
Click to expand...
Click to collapse
sorry Iam wrong
My Cid is
htc__044

Rolando88 said:
Mike or anyone please what do i need to download for the New firmware my main version is 1.12.401.17 bootloader 3.16.0.0000
Cid htc_e11
Click to expand...
Click to collapse
Please help me

firmware
cid = T-MOB010
mid = 0P6B13000
with S-On
- What firmware should I d/l to update to the latest?

Firmware download HTC One M8
Hi Mike,
As I did not read correctly I did not flash the newest Firmware before flashing HD-One_m8_21.0.zip.
Now I try to download the 3.28.401.7.zip from your db_mirror\firmware site, but after download I get the message: "invalid zip".
Any idea?
Tnx, Chris

Same problem
I need help!
I'm s-off
i've locked the bootloader with oem lock command,
flashed the new firmware,
but now the phone stuck on htc white loading screen after playng boot-up sound.
I can go to bootloader but what then?
what i've to do?
thanks in advance

arhd 21 wifi not working
Just updated to arhd 21 WIFI now just hangs then shuts off
Any insights? Greatly appreciate any help.
Unlocked
S-OFF
CID: CW__001
Firmware: 3.28.401.7

poachstevens said:
Just updated to arhd 21 WIFI now just hangs then shuts off
Any insights? Greatly appreciate any help.
Unlocked
S-OFF
CID: CW__001
Firmware: 3.28.401.7
Click to expand...
Click to collapse
Are you sure that's your cid? Should be CWS__001. They're 8 characters. Is that a typo in your post, or do you really have that cid in phone?

jollywhitefoot said:
Are you sure that's your cid? Should be CWS__001. They're 8 characters. Is that a typo in your post, or do you really have that cid in phone?
Click to expand...
Click to collapse
Sorry yes, that was a typo CWS__001

How do I restore with s on on T-Mobile m8

3.28.401.7 Firmware
Hi
I was trying to flash the 3.28.401.7 firmware today, but i did get some errors.
My Htc m8 is S-OFF and have CID HTC__Y13. What am I doing wrong?
(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-2,0
(bootloader) [RUU]UZ,sbl1-2,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) current_image_number=6
(bootloader) start image[sbl1-3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-3,0
(bootloader) [RUU]UZ,sbl1-3,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) current_image_number=7
(bootloader) start image[sbl1-4] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-4,0
(bootloader) [RUU]UZ,sbl1-4,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) current_image_number=8
C:\sdk>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.21331147A1.19_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!

HTC One M8
When is gonna be an update for the Firmware for the M8 which are not in the list above?

having trouble flashing firmware from 2.22.401.5 to 3.28.401.7 or 3.29.401
Hey all, having trouble flashing either of the above firmware (3.28.401.7 or 3.29.401). Everytime I fastboot to RUU and try flashing, it fails. Any ideas as to what I'm missing? Let me know if I should provide more info.
HTC One M8
RELOCKED
S-OFF
cid - 11111111
HBOOT - 3.16
android - 4.4.3
firmware - 2.22.401.5
ARHD - 11.2
steps:
fastboot oem lock
fastboot oem rebootRUU - phone reboots to RUU screen
fastboot flash zip firmware.zip
fails everytime

version 0.5 and hbootpreupdate: 11
Hi all
I flashed 3.28.401.9 firmware last night and everything is OK. But i can't figure out why I'm still on version 0.5 and hbootpreupdate: 11
Is ther anyone that can help me?
C:\sdk>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
C:\sdk>

[Q] [HELP] Colored, Black & White dots on Display like an old TV

Hi
I have bought a second hand M8 couple of days ago and it was working fine with ARHD 8 installed
Today I have decided to try ARHD 34.6 & 41 and I faced a weird problem... the touch lags and I have to turn off the screen and back on to get it working again, and after a few minutes it shows Colored, Black & White dots like an old TV.... and this also happens in fastboot mode.
Is this something related to the screen? or maybe cause I have not updated my hboot?
Here is my info
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: DELETED
(bootloader) imei: DELETED
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.039s
Edit: Here is a screenshot of the issue:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also enabling "Disable HW overlays" option in developer options fix the problem partially and make it happen a little only.

osama-selo said:
Hi
I have bought a second hand M8 couple of days ago and it was working fine with ARHD 8 installed
Today I have decided to try ARHD 34.6 & 41 and I faced a weird problem... the touch lags and I have to turn off the screen and back on to get it working again, and after a few minutes it shows Colored, Black & White dots like an old TV.... and this also happens in fastboot mode.
Is this something related to the screen? or maybe cause I have not updated my hboot?
Here is my info
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: DELETED
(bootloader) imei: DELETED
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.039s
Click to expand...
Click to collapse
Your phone is in dot view mode. Change it in settings > personalize > dot view. The problem is that dot view works with magnetism. You could also pass a magnet over it to change it back (from what I've heard/read) but turning it off if you don't use the dot view case is probably your best option.

xunholyx said:
Your phone is in dot view mode. Change it in settings > personalize > dot view. The problem is that dot view works with magnetism. You could also pass a magnet over it to change it back (from what I've heard/read) but turning it off if you don't use the dot view case is probably your best option.
Click to expand...
Click to collapse
Thanks for your reply, but i don't think that my problem is with the dot view as it also happens in fastboot mode.
When it happens i need to turn of the screen for a couple of minutes then it will be fixed.
But the weird thing that it did not happened on ARHD 8, If you have a link for it so i can go back and test it, it would be great.
Thanks

osama-selo said:
Thanks for your reply, but i don't think that my problem is with the dot view as it also happens in fastboot mode.
When it happens i need to turn of the screen for a couple of minutes then it will be fixed.
But the weird thing that it did not happened on ARHD 8, If you have a link for it so i can go back and test it, it would be great.
Thanks
Click to expand...
Click to collapse
Thanks for adding the screenshot. I would guess that it is a hardware issue. You will probably have to take it for repairs.
Have you dropped your phone recently?
You can also screw up your digitizer by messing with your DPI settings. Have you been doing that?
Another cause may be an incomplete firmware flash perhaps? This is just a shot in the dark. Have you flashed any firmware recently?

Get HTC m8 to lollipop!

Hello I just bought an m8 on aliexpress (took a while to get to me...) and when I first turned it on I noticed that it was already rooted (it is refurbished and they send it that way. It is new but rooted) and is on android 4.4.4, pretty old. There are a lot of improvements with the updates from htc but when I search for the option on the settings it is not there, it should, but it isn't there. So, I want to get it updated with the RUU which I think shoud be the safest option (I don't really care to lose root) but the thing is I don't really know what RUU I am supposed to get! The phone is supposed to be unlocked. This is the information I got with "getvar all"
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.0926
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.31.512.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT439SF00963
(bootloader) imei2: Not Support
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B20000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 2e9b7c51
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
I don't really know what was done to the phone, and actually my main reason to do this is to update it to lollipop and be able to keep upgrading. If someone can help me with that I would really apreciate it!

First of all it's a verizon phone, secondly it's S-Off and has SuperCID already, interesting.
luckily for you, you just have to download this https://www.androidfilehost.com/?fid=95916177934538714
if you want non verizon rom e.g no bloat and crap like that, I'll help you further, but first you must run the RUU.
http://forum.xda-developers.com/ver...zip-ruu-m8vzw-5-0-1-s-off-onlynewest-t3047103
more info here about the whole process, it's very simple.
Good luck, have fun.

hello guys,
i'm in the same issue and i try to upgrade the firmware yesterday but the new build number is only show everywhere exept that my android version is still 4.4.2.
thank you in advance
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.401.10
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B1****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

hb4spooks said:
hello guys,
i'm in the same issue and i try to upgrade the firmware yesterday but the new build number is only show everywhere exept that my android version is still 4.4.2.
thank you in advance
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-main: 4.16.401.10
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) modelid: 0P6B1****
(bootloader) cidnum: 11111111
Click to expand...
Click to collapse
Why do you hide an inportant info modelid ? You should remove serial & imei no as they are sensitive info.
Flashing firmware alone won't upgrade your OS.
Install 4.16.401.10 RUU to upgrade your OS (but this will wipe everything on internal storage) - get it here : http://androidruu.com/?developer=M8
Or you can use 4.16.401.10 nandroid backup to upgrade the OS (this will not wipe your internal storage) - get it from link in my signature

i didn't hide nothing
ckpv5 said:
Why do you hide an inportant info modelid ? You should remove serial & imei no as they are sensitive info.
Flashing firmware alone won't upgrade your OS.
Install 4.16.401.10 RUU to upgrade your OS (but this will wipe everything on internal storage) - get it here :
Or you can use 4.16.401.10 nandroid backup to upgrade the OS (this will not wipe your internal storage) - get it from link in my signature
Click to expand...
Click to collapse
the phone comes like that this is the problem with aliexpressdotcom refubished phones .... i just copy and past everything, i'll try the .exe methode later because i'm on ubuntu and tell you if it works

Update Help!
I downloaded latest firmware from and ran the setup on Windows 10. Now I am stuck on "Updating....(0/7) Sending.................." My phone is showing just HTC logo with black background. Please help!

itsuzairahmad said:
I downloaded latest firmware from and ran the setup on Windows 10. Now I am stuck on "Updating....(0/7) Sending.................." My phone is showing just HTC logo with black background. Please help!
Click to expand...
Click to collapse
To run a RUU .. you need USB2.0 and latest HTC USB driver installed. If not sure, download HTC Sync Manager - http://www.htc.com/us/support/software/htc-sync-manager.aspx
install it as it will install the latest HTC USB driver then uninstall the HTC Sync Manager but leave the driver.
Also check whether your Win 10 has these 2008 C++ installed. You may need them too.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ckpv5 said:
To run a RUU .. you need USB2.0 and latest HTC USB driver installed. If not sure, download HTC Sync Manager
install it as it will install the latest HTC USB driver then uninstall the HTC Sync Manager but leave the driver.
Also check whether your Win 10 has these 2008 C++ installed. You may need them too.
View attachment 3502770
Click to expand...
Click to collapse
Thank you for taking the time to reply. Turned out I was installing the wrong update. I am using Verizon version in Pakistan and it can only be updated in the US by the carrier. Would appreciate if anybody helps regarding this.

thank you
ckpv5 said:
Why do you hide an inportant info modelid ? You should remove serial & imei no as they are sensitive info.
Flashing firmware alone won't upgrade your OS.
Install 4.16.401.10 RUU to upgrade your OS (but this will wipe everything on internal storage) - get it here :
Or you can use 4.16.401.10 nandroid backup to upgrade the OS (this will not wipe your internal storage) - get it from link in my signature
Click to expand...
Click to collapse
It works fine... I just got some issues with the radio ... I wonder if it because I changed my SIM card then it could come from the provider

Black screen after HTC startup logo please help! [bricked probably]

Hi everyone,
So my HTC one M8 was rooted with TWRP recovery. It was running Android 5.0 I think. I got an OTA update but I was not able to update it because of TWRP. I wanted the update so bad and I searched on Youtube to know how to update the software. I found a video and I followed these steps.
1 - Replace custom recovery with stock recovery
2 - Process OTA Update
3 - Replace stock recovery with custom recovery
However, when I replaced the custom recovery with the stock recovery, I downloaded the OTA update and updated it. But after the update completed, the device never booted up. It shows the HTC logo then it goes black! (The screen is still on, but black!) Have I bricked the phone? How Can I fix it please!
PS. Here is the video I watched www.youtube.com/watch?v=PPPT5J8xG6w

Rezhwscene said:
Hi everyone,
So my HTC one M8 was rooted with TWRP recovery. It was running Android 5.0 I think. I got an OTA update but I was not able to update it because of TWRP. I wanted the update so bad and I searched on Youtube to know how to update the software. I found a video and I followed these steps.
1 - Replace custom recovery with stock recovery
2 - Process OTA Update
3 - Replace stock recovery with custom recovery
However, when I replaced the custom recovery with the stock recovery, I downloaded the OTA update and updated it. But after the update completed, the device never booted up. It shows the HTC logo then it goes black! (The screen is still on, but black!) Have I bricked the phone? How Can I fix it please!
PS. Here is the video I watched www.youtube.com/watch?v=PPPT5J8xG6w
Click to expand...
Click to collapse
That video is nonsense. There is a blatant mistake at 6.44 and the knob doesn't see it. You need to go back to stock first, then take the OTA.

Einwod said:
That video is nonsense. There is a blatant mistake at 6.44 and the knob doesn't see it. You need to go back to stock first, then take the OTA.
Click to expand...
Click to collapse
Thanks for the reply! But please, how can I fix my device now? I don't have TWRP anymore! But I can access the Stock revovery. What should I do? :'(

Rezhwscene said:
Thanks for the reply! But please, how can I fix my device now? I don't have TWRP anymore! But I can access the Stock revovery. What should I do? :'(
Click to expand...
Click to collapse
Go into fastboot and open a command prompt. Type in fastboot getvar all and post the output here. Remove your serial and IMEI numbers before you post. Hopefully we can get you back to stock.

Einwod said:
Go into fastboot and open a command prompt. Type in fastboot getvar all and post the output here. Remove your serial and IMEI numbers before you post. Hopefully we can get you back to stock.
Click to expand...
Click to collapse
Okay, before I see your respond I did a stupid thing! I flashed TWRP and I wanted to flash stock ROM and I followed these instructions from this website
http://www.carbontesla.com/2015/01/htc-one-m8-4-16-401-10-stock-lollipop-ruu-0p6bimg/
But when I want to flash the rom its says "target reported max download size of 1826414592 bytes error: cannot load 'L50RUU.zip'"
Anyway, now my device is " Relocked" and when I type fastboot getvar I get this>>>>
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What should I do?

Rezhwscene said:
Okay, before I see your respond I did a stupid thing! I flashed TWRP and I wanted to flash stock ROM and I followed these instructions from this website
http://www.carbontesla.com/2015/01/htc-one-m8-4-16-401-10-stock-lollipop-ruu-0p6bimg/
But when I want to flash the rom its says "target reported max download size of 1826414592 bytes error: cannot load 'L50RUU.zip'"
Anyway, now my device is " Relocked" and when I type fastboot getvar I get this>>>>
What should I do?
Click to expand...
Click to collapse
First unlock the bootloader again. TWRP you need and the command is: fastboot getvar all Check your messages also.

Einwod said:
First unlock the bootloader again. TWRP you need and the command is: fastboot getvar all Check your messages also.
Click to expand...
Click to collapse
Okay I'm a goddamn noob! How to unlock the bootloader again? this command " fastboot oem unlock" does not work!
AND here is the result!
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.401.13
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__016
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: f063fb42
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.192s

Rezhwscene said:
Okay I'm a goddamn noob! How to unlock the bootloader again? this command " fastboot oem unlock" does not work!
AND here is the result!
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.401.13
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__016
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: f063fb42
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.192s
Click to expand...
Click to collapse
Luckily you have a WWE device. Download this RUU and run it from Windows. Make sure you have HTC drivers installed. The easy way to do that is to install HTC Sync and then uninstall it. The HTC drivers will be left behind. That will take you to stock 4.16.401.10. You will then receive the update to 13.

Einwod said:
Luckily you have a WWE device. Download this RUU and run it from Windows. Make sure you have HTC drivers installed. The easy way to do that is to install HTC Sync and then uninstall it. The HTC drivers will be left behind. That will take you to stock 4.16.401.10. You will then receive the update to 13.
Click to expand...
Click to collapse
I owe you my life man! Thanks for responding quickly. Anyway, Should I unlock the bootloader then run the .exe file?

Rezhwscene said:
I owe you my life man! Thanks for responding quickly. Anyway, Should I unlock the bootloader then run the .exe file?
Click to expand...
Click to collapse
No, the bootloader needs to be relocked/locked for the RUU.exe to work. It should work from fastboot mode. If it doesn't, I'll be on again tomorrow.

Einwod said:
Luckily you have a WWE device. Download this RUU and run it from Windows. Make sure you have HTC drivers installed. The easy way to do that is to install HTC Sync and then uninstall it. The HTC drivers will be left behind. That will take you to stock 4.16.401.10. You will then receive the update to 13.
Click to expand...
Click to collapse
OH MY GOD IT WORKED! I seriously don't know how to thank you or how to repay you! Thank you a million! I don't have a credit card to donate because you deserve it! But I'll get one soon, Promise!!

Rezhwscene said:
OH MY GOD IT WORKED! I seriously don't know how to thank you or how to repay you! Thank you a million! I don't have a credit card to donate because you deserve it! But I'll get one soon, Promise!!
Click to expand...
Click to collapse
Glad everything all worked out. MM update should be out any day now. Enjoy.

HTC One M8 Wiped without creating a backup

Dear Experts, I need your help, I am having htc One with following details.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HC4BRYC15296
(bootloader) imei: 355587426879862
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B6****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Please help me now, I want to update with oreo and when I tempered with device, it was having Kit Kat 4.4.4, It is perfectly unlocked, having root access. TWRP version 3.0 is also installed on it, suggest me the best soft application to get my phone back in working position.
Some of the pictures are here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These are the screenshots i obtained, Please suggest me the procedure that must be easy to follow, considering my limitations of IT advanced knowledge.
Thank You. I am now waiting for you response.

You need these steps :
1. Change your current modelid: 0P6B6**** to 0P6B10000
How-to read this - https://forum.xda-developers.com/showthread.php?t=2708581
If you can boot to recovery (not sure twrp 3.0 can work on KitKat, if can't install twrp 2.8.3.0)
Then run command adb shell
Skip command su
Then the rest for Europe MID codes
2. Install RUU - https://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
There is a shortcut way with flashing firmware only but seems you're new to this, installing RUU is a better option
3. Install twrp 3.2.1.0
4. Install your Oreo ROM

ckpv5 said:
You need these steps :
1. Change your current modelid: 0P6B6**** to 0P6B10000
How-to read this - https://forum.xda-developers.com/showthread.php?t=2708581
If you can boot to recovery (not sure twrp 3.0 can work on KitKat, if can't install twrp 2.8.3.0)
Then run command adb shell
Skip command su
Then the rest for Europe MID codes
2. Install RUU - https://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
There is a shortcut way with flashing firmware only but seems you're new to this, installing RUU is a better option
3. Install twrp 3.2.1.0
4. Install your Oreo ROM
Click to expand...
Click to collapse
thanks brother, I did in similar way as you instructed me but I am unable to boot my htc, it is now stuck in bootloop, I installed 14.1 image, but It is not working properly, My phone is rebooting again and again. Please help me further, Now you can suggest me some advanced method as well. I will try to move after, Please give me bootable Image. I am waiting for your response.

Post current fastboot getvar all result then we'll see whether it is correctly done.
Step 2, install RUU .. do you manage this ?

ckpv5 said:
Post current fastboot getvar all result then we'll see whether it is correctly done.
Step 2, install RUU .. do you manage this ?
Click to expand...
Click to collapse
Here is the other thing latest getvar info...
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HC4BRYC15296
(bootloader) imei: 355587426879862
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Please Help me, My phone is currently off. Please help me.

Your getvar show you successfully changed MID as said in step 1.
But you skip step 2 and install lineage 14.1, this won't work & explained the bootloop.
Do step 2 then post fastboot getvar all. Once ok then only do step 3 & later step 4 install lineage OS

ckpv5 said:
Your getvar show you successfully changed MID as said in step 1.
But you skip step 2 and install lineage 14.1, this won't work & explained the bootloop.
Do step 2 then post fastboot getvar all. Once ok then only do step 3 & later step 4 install lineage OS
Click to expand...
Click to collapse
thanks My phone is working with Marshmallow. I want to move on oreo.......How I can move on to it, and please suggest me a best rom thanks.

Follow step 3 then step 4 as you completed step 1 & 2.
I can't suggest a best rom as I usually on my own customized ROM, but now I'm on Oreo LOS 15.1 and there's only one Oreo LOS 15.1 that openly public release for now.

ahmad04464 said:
thanks My phone is working with Marshmallow. I want to move on oreo.......How I can move on to it, and please suggest me a best rom thanks.
Click to expand...
Click to collapse
ckpv5 graciously gave you all the steps required to update the firmware and install an Oreo ROM. Why are you skipping steps? Just follow them all. He wouldn't post it, if you didn't need to do it. Why would you only follow half the advice given to you, and expect it to work properly?