I installed the latest zui via twrp which had instruction to unmount system before flash i did the same thing bu the rom has booted but it's not letting me in as it has stuck on system updates check which starts after connecting to wifi
pratham Mittal
regards
[email protected]gmail.com said:
I installed the latest zui via twrp which had instruction to unmount system before flash i did the same thing bu the rom has booted but it's not letting me in as it has stuck on system updates check which starts after connecting to wifi
pratham Mittal
regards
Click to expand...
Click to collapse
Who the hell adviced you to flash that ROM?
Related
Hi All,
Previously my op3 unlocked and rooted after some days i was flashed Freedom OS 1.7 (normal) build. Now i want go back to complete stock and unroot. I follow some of the guidance videos internet and followed ,
1. Restored my backup via twrp
2. Flashed Full rom OOS 3.2.6 via TWRP
3. Flashed stock recovery via ADB. Everything works fine but
Now i am trying to update 3.2.6 to 3.2.7 getting error " Installation Failed" . Whats wrong i did .
Also i have boot logo Freedom OS don't know even i am on stock rom. Can any one help me
1. How to remove that boot logo
2. Completely go back to stock rom with stock recovery
3. Also get updates and install without fail
Please help Guys.
Thanks in Advance
Mahesh
Well, probably its a problem with your boot.img partition. Extract boot.img from stock rom zip, then flash it via fastboot flash boot boot.img and then, flash orginal recovery same as boot. Then, finally, flash via recovery STOCK ROM. Probably now it will be fine.
If not, try flash TWRP and make FULL WIPE included system partition and repeat upper steps.
Cheers.
In twrp goto wipe and do normal wipe remember don't do advance wipe otherwise it'll format internal storage as well so avoid advance wipe only do normal wipe then install full 3.2.7 zip and super su. zip
Sent from my ONEPLUS A3003 using Tapatalk
Mahesh8348 said:
Hi All,
Previously my op3 unlocked and rooted after some days i was flashed Freedom OS 1.7 (normal) build. Now i want go back to complete stock and unroot. I follow some of the guidance videos internet and followed ,
1. Restored my backup via twrp
2. Flashed Full rom OOS 3.2.6 via TWRP
3. Flashed stock recovery via ADB. Everything works fine but
Now i am trying to update 3.2.6 to 3.2.7 getting error " Installation Failed" . Whats wrong i did .
Also i have boot logo Freedom OS don't know even i am on stock rom. Can any one help me
1. How to remove that boot logo
2. Completely go back to stock rom with stock recovery
3. Also get updates and install without fail
Please help Guys.
Thanks in Advance
Mahesh
Click to expand...
Click to collapse
before you flash 3.2.7 mount system read-only. you can do this under "mount"
it is a known bug with twrp and oxygenos
You can download the stock boot logo from here: https://www.androidfilehost.com/?fid=529152257862664522
Credits goes to @jamal2367
panther124 said:
before you flash 3.2.7 mount system read-only. you can do this under "mount"
You can download the stock boot logo from here: https://www.androidfilehost.com/?fid=529152257862664522
Credits goes to @jamal2367
Click to expand...
Click to collapse
Hi you are saying in TWRP or Stock recovery? anyway i am on stock recovery . How to mount on stock recovery.
Mahesh8348 said:
Hi you are saying in TWRP or Stock recovery? anyway i am on stock recovery . How to mount on stock recovery.
Click to expand...
Click to collapse
if you are on stock recovery you cant change the mounts.
flash twrp to flash bootlogo and oxygenos 3.2.7
otherwhise you have to install via sideload but this is very slow and you cant flash stock bootlogo
so flash twrp and then mount system read-only and then flash oxygenos 3.2.7 and after or before this you can flash the stock bootlogo
panther124 said:
if you are on stock recovery you cant change the mounts.
flash twrp to flash bootlogo and oxygenos 3.2.7
otherwhise you have to install via sideload but this is very slow and you cant flash stock bootlogo
so flash twrp and then mount system read-only and then flash oxygenos 3.2.7 and after or before this you can flash the stock bootlogo
Click to expand...
Click to collapse
Thanks sir for that boot logo.
I want go complete stock without twrp. after i flash 3.2.6 via twrp it will replace twrp recovery and automatically go to stock recovery. Again i flashed stock recovery . try to update via stock recovery it shows installation failed. attached is the image for your reference. could you please suggest to install updates successfully .
Mahesh8348 said:
Thanks sir for that boot logo.
I want go complete stock without twrp. after i flash 3.2.6 via twrp it will replace twrp recovery and automatically go to stock recovery. Again i flashed stock recovery . try to update via stock recovery it shows installation failed. attached is the image for your reference. could you please suggest to install updates successfully .
Click to expand...
Click to collapse
download 3.2.7 full zip and flash it
i will show you how to get this becuase you cant download it from official site
http://forum.xda-developers.com/oneplus-3/how-to/download-install-oxygenos-3-2-7-update-t3472178
here you can get the full zip. And this zip you can flash without 3.2.6 preinstalled.
panther124 said:
download 3.2.7 full zip and flash it
i will show you how to get this becuase you cant download it from official site
http://forum.xda-developers.com/oneplus-3/how-to/download-install-oxygenos-3-2-7-update-t3472178
here you can get the full zip. And this zip you can flash without 3.2.6 preinstalled.
Click to expand...
Click to collapse
Thanks for that sir,
Every time i got update need to do like this way. or i will get updates automatically .
Mahesh8348 said:
Thanks for that sir,
Every time i got update need to do like this way. or i will get updates automatically .
Click to expand...
Click to collapse
You should get it automatically
i installed the official nougat update via VPN. Then rooted my op3 with nougat using modified twrp. Today i receieved OTA of 30mb, i downloaded it and click reboot. And then the problem started. The device continues to boot in twrp and im not able to use my op3.
Please HELP.......!!!!!!!!!!!!!!!
You messed up! Everyone knows that before flashing ota you should be on OnePlus recovery now you can sideload oos or flash through twrp.
neeraj679 said:
You messed up! Everyone knows that before flashing ota you should be on OnePlus recovery now you can sideload oos or flash through twrp.
Click to expand...
Click to collapse
should I flash any other rom or the oos 4.0...???
pranav_j619 said:
should I flash any other rom or the oos 4.0...???
Click to expand...
Click to collapse
which twrp version are you using? also do you have encryption issues in twrp? you might not need to reflash the rom butmay be reset the phone and install updated twrp. there are couple of threads. i myself saw this issue on my device
I faced the same issue. Just flash the stock recovery and boot the phone. The update will fail and you'll be back on.
You can flash newest BluSpark TWRP and the the 4.0.2 Full ZIP, then it should work
This is the solution that worked for me
MM MaD said:
I faced the same issue. Just flash the stock recovery and boot the phone. The update will fail and you'll be back on.
Click to expand...
Click to collapse
I had the same issue, flash the stock recovery 2.0 on the phone (the one that takes 64Mb) and then boot the phone. As mentioned it'll fail but then you get out of the loop and can flash whichever recovery and rom you feel like. And thanks for the people that mirrored the recovery while it was not on the official page, and to the people that suggested this, it was a pain to fix the first time.
pranav_j619 said:
i installed the official nougat update via VPN. Then rooted my op3 with nougat using modified twrp. Today i receieved OTA of 30mb, i downloaded it and click reboot. And then the problem started. The device continues to boot in twrp and im not able to use my op3.
Please HELP.......!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Had this issue before, just look on your internal memory, there is a folder called ".OTAsomething", in there the OTA zip is stored, delete it and the phone will boot to Oxygen OS again.
So I just got Mi6 in my hands today, and tried to install Xiaomi EU v8.5.2.0 ROM.
Now, it won't boot. Stuck in Mi logo.
I have flashed TWRP
I have wiped Dalvik Cache, Cache, System, Data, Internal Storage (and probably that messed it up)
Then, installed the ROM via sideload. Rebooted phone, and it's stuck in boot logo
Some friends said something about "boot.img" and SuperSU. What should I do now?
Thank you!
I think your best bet now to use miflash tool and flash fastboot rom.
Though if you can flash twrp, you should be able to flash custom rom using that. Follow the steps 1 by 1. Sometimes certain rom needs u to flash firmware first.
cagriari said:
So I just got Mi6 in my hands today, and tried to install Xiaomi EU v8.5.2.0 ROM.
Now, it won't boot. Stuck in Mi logo.
I have flashed TWRP
I have wiped Dalvik Cache, Cache, System, Data, Internal Storage (and probably that messed it up)
Then, installed the ROM via sideload. Rebooted phone, and it's stuck in boot logo
Some friends said something about "boot.img" and SuperSU. What should I do now?
Thank you!
Click to expand...
Click to collapse
Hi if access to twrp put this ROM on : http://bigota.d.miui.com/7.8.24/miui_MI6Global_7.8.24_52ee82c864_7.1.zip
Then flash via twrp then reboot
jejemc said:
Hi if access to twrp put this ROM on :
Then flash via twrp then reboot
Click to expand...
Click to collapse
Well, I have fixed it by repairing system partition. But now, no EU ROM will boot. MIUI Global Stable v8.2 boots, but Wi-Fi and fingerprint is broken.
cagriari said:
Well, I have fixed it by repairing system partition. But now, no EU ROM will boot. MIUI Global Stable v8.2 boots, but Wi-Fi and fingerprint is broken.
Click to expand...
Click to collapse
So he restarted? Test can be ROM dev to see
But bizarre that on stable ROM this does not work
Yeah, I would suggest flash stable fastboot rom via miflash and start again. If fingerprint/wifi still broken after flash fastboot rom via miflash, there is high chance the hardware is broken.
If it does back to stock and everything works, follow flash procedure for custom rom step by step. There is no real reason it will not work. Good luck
yumm91 said:
Yeah, I would suggest flash stable fastboot rom via miflash and start again. If fingerprint/wifi still broken after flash fastboot rom via miflash, there is high chance the hardware is broken.
If it does back to stock and everything works, follow flash procedure for custom rom step by step. There is no real reason it will not work. Good luck
Click to expand...
Click to collapse
MiFlash gives me "cast id invalid" error, I've been using TWRP and fastboot to flash. I flashed it few times, but it didn't work. So I wiped all the data, flashed again and it works now.
Any ideas why won't EU ROMs boot?
Thanks!
I am using xiaomi.eu ROM myself flashed via twrp 3.1.1.0 Seems working fine. I just boot the twrp via fastboot boot, using twrp mtp to transfer EU rom inside, and flashed.
Done. Everything works. I am currently under miui 8.2 atm. Seems good so far.
At first I flashed Nougat chines rom from stock marshmallow rom which is also chines rom.
But i did this after unlocking the bootloader and TWRP flashing.
Then my phone was start and i gave factory reset from settings menu
After that phone is not open
The led notification is come and also the ZUK logo come but disappear immediately
What is the solution ?
csemasud said:
At first I flashed Nougat chines rom from stock marshmallow rom which is also chines rom.
But i did this after unlocking the bootloader and TWRP flashing.
Then my phone was start and i gave factory reset from settings menu
After that phone is not open
The led notification is come and also the ZUK logo come but disappear immediately
What is the solution ?
Click to expand...
Click to collapse
Press the power button until it vibrates and reboots. Reboot into recovery. This ll take you to TWRP.
Now Wipe -> Advanced Wipe -> Wipe Cache, Dalvick Cache, System, Data.
Download any stable nougat rom like AEX 4.6, DOT OS Latest, Viper 3.1.1 and transfer it to OTG pen drive and connect the OTG drive to the phone and install the ROM of your choice by selecting the storage as OTG and reboot to system after flashing.
Your phone should boot normally now.
Try this and update if it worked.
I can't enter into recovery mode
either stock recovery or TWRP
csemasud said:
I can't enter into recovery mode
either stock recovery or TWRP
Click to expand...
Click to collapse
Flashing Stock Nougat may have relocked the bootloader.
Unlock the bootloader again and flash the latest TWRP 3.2.1 in fastboot mode.
when i connected through PC by Adb sideload it's show no device found in command promt
try 9008
csemasud said:
when i connected through PC by Adb sideload it's show no device found in command promt
Click to expand...
Click to collapse
Try mi flash method, the i dont know much about this but you can search on xda
This one works 100%
https://forum.xda-developers.com/le...-to-recover-hard-bricked-zuk-z2-plus-t3576007
had exactly the same problem and my phone works now with this
I have unbeicked my device yesterday with MI flash, ask me if you run into problems
hi, my device is having problems.
I tried installing a custom stock-based Android ROM.
Have installed the latest fw, have tried installing using the latest version of pitchblack / orangefox twrp.
Already the data format, clean wipe, when rebooting the system, only reached the MI logo then the device restarts repeatedly does not enter the homescreen.
is there any solution ?
aego01 said:
hi, my device is having problems.
I tried installing a custom stock-based Android ROM.
Have installed the latest fw, have tried installing using the latest version of pitchblack / orangefox twrp.
Already the data format, clean wipe, when rebooting the system, only reached the MI logo then the device restarts repeatedly does not enter the homescreen.
is there any solution ?
Click to expand...
Click to collapse
Try different firmware and a different rom
aego01 said:
hi, my device is having problems.
I tried installing a custom stock-based Android ROM.
Have installed the latest fw, have tried installing using the latest version of pitchblack / orangefox twrp.
Already the data format, clean wipe, when rebooting the system, only reached the MI logo then the device restarts repeatedly does not enter the homescreen.
is there any solution ?
Click to expand...
Click to collapse
Try having latest firmware and any rom you like which is regularly updated