Related
Introduction :
Hey Guys so we successfully extracted the 4.4.2 stock ROM, Rooted it and Uploaded!
1st Let's Begin with How To ROOT and Flash Recovery on your XOLO Q1010i (works on both JB & KK)
Downloads:
-MTK USB Drivers (HERE)
- MT6582 Scatter File (HERE)
-NEW CTR Recovery by Chirag Jain for Q1010i Only (HERE)
-SP Flash Tools v3.1352.01 (5.1352.01) (HERE)
-SuperSu Zip (Download and Move it to your SD Card) (HERE)
Instructions:
PS - Place all Downloaded Files in the same Place for Easy Access (See Attachment For Screenshots)
Step 1: Install The MTK USB Drivers on Your PC by Clicking on Install.bat
If it Doesn't work See THIS
Step 2: Open SP Flash Tools folder and click on flash_tool.exe (See Attachment For Screenshots)
Step 3: In The Flash Tool window Click on Scatter-Loading, Select MT6582_Android_Scatter.txt and Press Open (See Attachment For Screenshots)
Step 4: In Flash Tool Window Check (Tick) RECOVERY and Click on the Blank Green Space Beside It and select Recovery.img (See Attachment For Screenshots)
Step 5: Press on Download Button at Top, Switch Off Your Device and Connect it to your PC (See Attachment For Screenshots)
Step 6: The Below Bar will Change it's Color Red Then Yellow and Finally show a Download OK Dialog Box (See Attachment For Screenshots)
Step 7: Now Disconnect Your Phone, Close Flash tools, Press and Hold Volume UP and Power Button Together till it powers UP
Step 8: It'll take you to Recovery Mode, In it Press Install Zip ---> Choose Zip SDCard ---> Select the SuperSu.zip You Placed Earlier in Your SDCard and Press YES Install
Step 9: On Complete Installation, Reboot Your Device, CONGRATULATIONS !!!! You've Successfully ROOTED and Flashed Recovery on Your Device !!!
Note:
If SP Flash Tools Shows You PMT Error Just Download the Preloader.bin From (HERE) and Flash it along with the Recovery through Sp Tools
Procedure is same You'll Just have to tick Preloader option and Load Preloader.bin also
Credits:
Chirag Jain For Porting CTR v2.2 Recovery for XOLO Q1010i
Nishan Goswami For Testing
Chainfire For Making SuperSu
Mediatek For SP Flash Tools
Here's How ROOT and Flash Recovery on Your Phone Without Touching Your PC
Instructions:
-Download and Install Framaroot( v1.9.1 Tested to be Working !!!) HERE
-Open The App and Select SuperSu from Dropdown Menu and press Bahahir,It'll be ROOTED!!!
-Download and Install Mobile Uncle tools From Play Store (HERE)
-Download CTR v2.2 Recovery.img (HERE) and place it in your SDCard Directly (Don't place it inside any Folder)
-Open Mobile Uncle Tools, Select Recovery update, Select Recovery.img From there, Press OK And Then Reboot into Recovery Mode !!!
DONE!!! You've Successfully Flashed Recovery on Your Device!!!
KK users follow this for Rooting without PC
Step 1: Root Your Device
Android 4.4.x
Download Rooting Package (HERE)
The Package contains KingRoot, SuperSu and ES File Explorer
PS- Make sure to turn off data/WiFi while Rooting
Steps:
1. Download the Package and Install Kingroot App from there
2. Open the App and Press on the Green Button on It
3. When A Tick Mark Shows , It means you’re Rooted!!!
STEP 2: Flash Recovery on your device
-Find Custom Recovery (HERE) for your Device
-Download Rashr from Play Store
-Place downloaded recovery.img on your SDCARD
-Open Rashr and Select Recovery from Storage
-In that menu select the .img file and Select Yes, please
--Now Reboot to Recovery
-And You’re done!!!
Flashing Q1010i (4.4.2-KitKat Stock ROM through Recovery
Here's HOW To Flash 4.4.2 Stock ROM Through Recovery (JB n KK)
Instructions
-Make Sure You've Flashed CTR Recovery on Your Device (See Post 1 & 2 for More Details)
-Download Flashable Zip of Stock 4.4.2 ROM from (HERE)
-Download SuperSu Zip from (Here)
-Place Both the Files in Your SD Card, Goto Recovery Mode
-In Recovery Mode Go To Install ---> Install from SD ----> Select the ROM File and press YES to Flash it and Do the Same for the SuperSu Zip after Flashing completes
-Reboot and Enjoy !!!
Credits:
Ritesh Nair for the Stock 4.4.2 Zip
Download links
hi,
i have updated mine to kitkat and can not gain root access
can you upload the recovery and rom pls
HOW To Flash Stock ROM on Your Device Through SP TOOLS
Here's HOW To Flash Stock ROM on Your Device Through SP TOOLS
Requirements:
-SP TOOLS v5.1352.01 (DOWNLOAD HERE)
-STOCK ROM For Your Device (4.4.2 KitKat ROM HERE) (4.2.2 Jelly BeanROM HERE)
-MTK USB Drivers (HERE)
-A PC with Windows 7 or Later
Instructions:
-Download and Extract the Stock ROM you Downloaded Above
-Download and Install the MTK USB Drivers from Above
-Extract SP TOOLs and Run Flash_tool.exe
-In the SP TOOLs Window Select Scatter Loading and Select MT6582_Android_scatter.txt Found in the Stock ROM folder you Just Extracted
-Press Download Button on the Top, Switch OFF and Connect Your Device to the PC
-The Flashing Will Start and You'll see Thew Bottom Status bar changing Color from Red, Purple to Yellow, Once Flaching is Complete You'll see a Download OK Dialog Box
-Now Disconnect your Phone and Power it Up!!!!
Thread Updated
Sent from my C2305 using Tapatalk
Thread Updated !!!!
Not working
bgos10 said:
Introduction :
Hey Guys so we successfully extracted the 4.4.2 stock ROM, Rooted it and Uploaded!
1st Let's Begin with How To ROOT and Flash Recovery on your XOLO Q1010i (works on both JB & KK)
Downloads:
-MTK USB Drivers (HERE)
-MT6582 Scatter File (HERE)
-CTR Recovery by Chirag Jain for Q1010i Only (HERE)
-SP Flash Tools v3.1352.01 (5.1352.01) (HERE)
-SuperSu Zip (Download and Move it to your SD Card) (HERE)
Instructions:
PS - Place all Downloaded Files in the same Place for Easy Access (See Attachment For Screenshots)
Step 1: Install The MTK USB Drivers on Your PC by Clicking on Install.bat
If it Doesn't work See THIS
Step 2: Open SP Flash Tools folder and click on flash_tool.exe (See Attachment For Screenshots)
Step 3: In The Flash Tool window Click on Scatter-Loading, Select MT6582_Android_Scatter.txt and Press Open (See Attachment For Screenshots)
Step 4: In Flash Tool Window Check (Tick) RECOVERY and Click on the Blank Green Space Beside It and select Recovery.img (See Attachment For Screenshots)
Step 5: Press on Download Button at Top, Switch Off Your Device and Connect it to your PC (See Attachment For Screenshots)
Step 6: The Below Bar will Change it's Color Red Then Yellow and Finally show a Download OK Dialog Box (See Attachment For Screenshots)
Step 7: Now Disconnect Your Phone, Close Flash tools, Press and Hold Volume UP and Power Button Together till it powers UP
Step 8: It'll take you to Recovery Mode, In it Press Install Zip ---> Choose Zip SDCard ---> Select the SuperSu.zip You Placed Earlier in Your SDCard and Press YES Install
Step 9: On Complete Installation, Reboot Your Device, CONGRATULATIONS !!!! You've Successfully ROOTED and Flashed Recovery on Your Device !!!
Credits:
Chirag Jain For Porting CTR v2.2 Recovery for XOLO Q1010i
Nishan Goswami For Testing
Chainfire For Making SuperSu
Mediatek For SP Flash Tools
Click to expand...
Click to collapse
I tested it and it is not working for me when I try to download it gives me an error that PMT is changed for this ROM and must be downloaded. Any fix for this?
---------- Post added at 06:32 AM ---------- Previous post was at 06:30 AM ----------
bgos10 said:
Here's HOW To Flash Stock ROM on Your Device Through SP TOOLS
Requirements:
-SP TOOLS v5.1352.01 (DOWNLOAD HERE)
-STOCK ROM For Your Device (4.4.2 KitKat ROM HERE) (4.2.2 Jelly BeanROM HERE)
-MTK USB Drivers (HERE)
-A PC with Windows 7 or Later
Instructions:
-Download and Extract the Stock ROM you Downloaded Above
-Download and Install the MTK USB Drivers from Above
-Extract SP TOOLs and Run Flash_tool.exe
-In the SP TOOLs Window Select Scatter Loading and Select MT6582_Android_scatter.txt Found in the Stock ROM folder you Just Extracted
-Press Download Button on the Top, Switch OFF and Connect Your Device to the PC
-The Flashing Will Start and You'll see Thew Bottom Status bar changing Color from Red, Purple to Yellow, Once Flaching is Complete You'll see a Download OK Dialog Box
-Now Disconnect your Phone and Power it Up!!!!
Click to expand...
Click to collapse
So is this Stock ROM is pre-rooted? or just pure stock ROM? because above rooting method is not working for me so I can try this one.
XenonTNT said:
I tested it and it is not working for me when I try to download it gives me an error that PMT is changed for this ROM and must be downloaded. Any fix for this?
---------- Post added at 06:32 AM ---------- Previous post was at 06:30 AM ----------
So is this Stock ROM is pre-rooted? or just pure stock ROM? because above rooting method is not working for me so I can try this one.
Click to expand...
Click to collapse
4.4.2 is rooted, 4.2.2 is not
Sent from my C2305 using Tapatalk
I got the fix while mobile is switch off we need to press volume up + power button after download button is pressed in sp tool to start downloading in mobile. Also to root on KitKat we need preloader file of kitkat also. So kindly upload it for other users I am downloading whole KitKat stock ROM.
The recovery does not seem to get flashed on JB stock rom. I tried with mobileuncletools...
it says reboot into recovery mode but simply restarts. may be working on kitkat but i have not tried. actually i did not really like the kitkat update. It takes away backup and restore app. and in exchange you get printing support and news widget which never gets the location. also messes up with Mifileexplorer and apex launcher. i have flashed TWRP and after taking backup of stock rom i can play with the kitkat update maybe...
thanks for the effort.
Thread Updated, now tested multiple times and new ctr recovery link added
please root xolo q1000 opus kitkat
q1000 opus is different from q1000.
q1000 opus has broadcom processor.
please root the kitkat build as the jb is rooted but kitkat has not been rooted by any dev
Help.. I'm still geting PMT error.. I also load prelaoder bin along with recovery.. But getting error.. Help .
My phone is rooted kitkat(4.4.2) ..i also pressed volume up and power button.. [emoji37][emoji24]
Sent from my Q1010i using Tapatalk
which is the most reliable method of rooting
framaroot or this method????
Root
Reconfigured said:
which is the most reliable method of rooting
framaroot or this method????
Click to expand...
Click to collapse
Farmaroot will not work after Kit Kat upadate. If you have stock Jelly Bean then use farmaroot method.
If you want rooted kitkat use this method.
Does not work on Xolo Q1010i with Android 4.4.2
bgos10 said:
Introduction :
Hey Guys so we successfully extracted the 4.4.2 stock ROM, Rooted it and Uploaded!
1st Let's Begin with How To ROOT and Flash Recovery on your XOLO Q1010i (works on both JB & KK)
Downloads:
-MTK USB Drivers (HERE)
- MT6582 Scatter File (HERE)
-NEW CTR Recovery by Chirag Jain for Q1010i Only (HERE)
-SP Flash Tools v3.1352.01 (5.1352.01) (HERE)
-SuperSu Zip (Download and Move it to your SD Card) (HERE)
Instructions:
PS - Place all Downloaded Files in the same Place for Easy Access (See Attachment For Screenshots)
Step 1: Install The MTK USB Drivers on Your PC by Clicking on Install.bat
If it Doesn't work See THIS
Step 2: Open SP Flash Tools folder and click on flash_tool.exe (See Attachment For Screenshots)
Step 3: In The Flash Tool window Click on Scatter-Loading, Select MT6582_Android_Scatter.txt and Press Open (See Attachment For Screenshots)
Step 4: In Flash Tool Window Check (Tick) RECOVERY and Click on the Blank Green Space Beside It and select Recovery.img (See Attachment For Screenshots)
Step 5: Press on Download Button at Top, Switch Off Your Device and Connect it to your PC (See Attachment For Screenshots)
Step 6: The Below Bar will Change it's Color Red Then Yellow and Finally show a Download OK Dialog Box (See Attachment For Screenshots)
Step 7: Now Disconnect Your Phone, Close Flash tools, Press and Hold Volume UP and Power Button Together till it powers UP
Step 8: It'll take you to Recovery Mode, In it Press Install Zip ---> Choose Zip SDCard ---> Select the SuperSu.zip You Placed Earlier in Your SDCard and Press YES Install
Step 9: On Complete Installation, Reboot Your Device, CONGRATULATIONS !!!! You've Successfully ROOTED and Flashed Recovery on Your Device !!!
Note:
If SP Flash Tools Shows You PMT Error Just Download the Preloader.bin From (HERE) and Flash it along with the Recovery through Sp Tools
Procedure is same You'll Just have to tick Preloader option and Load Preloader.bin also
Credits:
Chirag Jain For Porting CTR v2.2 Recovery for XOLO Q1010i
Nishan Goswami For Testing
Chainfire For Making SuperSu
Mediatek For SP Flash Tools
Click to expand...
Click to collapse
I tried the step mentioned above more than couple of times but it does not work
just a stupid question,,,does all mt6582 chopset device have the same scatter file,,,even in different phone brands?
kimerika said:
just a stupid question,,,does all mt6582 chopset device have the same scatter file,,,even in different phone brands?
Click to expand...
Click to collapse
Ya unless the scatter is modified manually
I successfully rooted my phone. Thanks a lot. I wanted to change my phone's font cause I got bored of same old font.
Sent from my Q1010i using Tapatalk
Root and TWRP 2.8.4.0 for S3 Neo
---------------------------------------------------------------------------------------------------------------------------------------------------------
Disclaimer : I am not responsible for any possible damage! Use this guide and methods on your own!
---------------------------------------------------------------------------------------------------------------------------------------------------------
Rooting method:
1. Install TWRP or CWM for S3 Neo
2. Download SuperSU-v2.45.zip and KNOX-Removal-Script.zip from attachments
3. Transfer downloaded zips to SDCard
4. Boot into recovery mode ( Vol UP + Home + Power )
5. Flash SuperSU-v2.45.zip and Knox-Removal-Script.zip
6. Reboot !
Enjoy! ---------------------------------------------------------------------------------------------------------------------------------------------------------
If you want to support my work you can donate me coffe. Use "Send payment" option on paypal ( [email protected] ) because "Donate" option is not available in my contry. Thanks.
---------------------------------------------------------------------------------------------------------------------------------------------------------
Thanks to :
Chainfire for SuperSU
Kaito95 for his KNOX removal script
---------------------------------------------------------------------------------------------------------------------------------------------------------
TWRP 2.8.5.0 for S3 Neo
T.W.R.P 2.8.5.0 recovery for S3 Neo GT-I9301I, GT-I9300I and GT-I9301Q
---------------------------------------------------------------------------------------------------------------------------------------------------------
Installation:
1st Method ( Flashable ZIP )
1. Download TWRP flashable zip for S3 Neo and transfer it to your phone
2. Boot your device into recovery ( Vol Up + Home+ Power )
3. Install TWRP flashable zip
4. Now you have TWRP recovery on your device ( Boot with vol up + home + power )
2nd Method ( Odin method )
1. Download recovery.tar.md5
2. Download ODIN and Samsung USB drivers
3. Boot device in download mode ( Vol down + home + power )
4. Press volume up ( continue ) and connect phone with PC
5. Make sure Odin recognizes your phone ( There should be something like "0:[COM11]" in first box and it will be yellow )
6. Press PDA and navigate to recovery.tar.md5
7. Make sure Re-partition is unchecked
8. Press "Start" and wait few seconds
9. Device will reboot and you will have TWRP recovery on your device ( Boot with vol up + home + power )
3rd method ( Terminal emulator - requires rooted device )
1. Download recovery.img and transfer it to your phone ( i will use /sdcard but it is optional)
2. Download Terminal Emulator from playstore
3. Open Teminal emulator and type
NOTE: It is VERY IMPORTANT to write this correctly because you are risking to hard brick your device if you mistype number, double check before pressing enter
Code:
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p15
or to be 100% sure you can write this, effect is same
Code:
su
dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Note: You can change path to recovery.img to your optional
4. Now you have TWRP recovery on your device ( Boot with vol up + home + power )
Enjoy!
---------------------------------------------------------------------------------------------------------------------------------------------------------
If you want to support my work you can donate me coffe. Use "Send payment" option on paypal ( [email protected] ) because "Donate" option is not available in my contry. Thanks.
---------------------------------------------------------------------------------------------------------------------------------------------------------
Thanks for help:
@AntaresOne
Rox said:
T.W.R.P 2.8.0.0 recovery for S3 Neo GT-I9301I
---------------------------------------------------------------------------------------------------------------------------------------------------------
Installation:
1st Method (Odin method)
1. Download recovery.tar.md5 from HERE
2. Download ODIN and Samsung USB drivers
3. Boot device in download mode ( Vol down + home + power )
4. Press volume up ( continue ) and connect phone with PC
5. Make sure Odin recognizes your phone ( It shoudl write sth like 0:[COM11] in first box and turn it to yellow )
6. Press PDA and navigate to recovery.tar.md5
7. Make sure Re-partition is unchecked
8. Press "Start" and wait few seconds
9. Device will reboot and you will have TWRP recovery on your device ( Boot with vol up + home + power )
2nd Method ( Terminal emulator - requires rooted device )
1. Download recovery.img from HERE and transfer it to your phone ( i will use /sdcard but it is optional)
2. Download Terminal Emulator from playstore
3. Open Teminal emulator and type
NOTE: It is VERY IMPORTANT to write this correctly because you are risking to hard brick your device if you mistype number, double check before pressing enter
Code:
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p15
or to be 100% sure you can write this, effect is same
Code:
su
dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Note: You can change path to recovery.img to your optional
4. Now you have TWRP recovery on your device ( Boot with vol up + home + power )
3rd method ( Flashable zip ) - Comming soon!
Enjoy! ---------------------------------------------------------------------------------------------------------------------------------------------------------
Bugs:
-Brightness control -Fixed in next build
---------------------------------------------------------------------------------------------------------------------------------------------------------
Thanks for help:
@AntaresOne
Click to expand...
Click to collapse
Rox I'll send you updated build with fixed brightness control asap.
Inviato dal mio GT-I9505
Will this updated version also work on GT-i9300i ( Galaxy s3 Neo Duos ) version ???
Can this be ported for this version, btw - isn't the 2.8.0.1 the last version? i can test if anyone wants to send me updated builds
TWRP backup of stock rom makes read only /sdcard [ root:sdcard_r ] on my device.
Fix:
restore everything except data;
boot, set up device, reboot to recovery, restore data without wipe.
_wook_ said:
TWRP backup of stock rom makes read only /sdcard [ root:sdcard_r ] on my device.
Fix:
restore everything except data;
boot, set up device, reboot to recovery, restore data without wipe.
Click to expand...
Click to collapse
Help,
Have installed the recovery but now my sdcard is read only. And forget to make backup before can help me someone ?
mount -o rw,remount /sdcard
Rox said:
mount -o rw,remount /sdcard
Click to expand...
Click to collapse
It is mounted as rw, and I tried everything, chowning, chmoding... not just /sdcard but other locations (/storage/emulated/*; /data/media et. al.)
Everything seems ok, but just not working...
_wook_ said:
TWRP backup of stock rom makes read only /sdcard [ root:sdcard_r ] on my device.
Fix:
restore everything except data;
boot, set up device, reboot to recovery, restore data without wipe.
Click to expand...
Click to collapse
can you explain me better how you did it please ?
bene1 said:
can you explain me better how you did it please ?
Click to expand...
Click to collapse
If you had backup, then you was able to restore it properly, but now, however, when you make backup, it is readonly no matter what.
I will try to see what actually is making problem today.
_wook_ said:
If you had backup, then you was able to restore it properly, but now, however, when you make backup, it is readonly no matter what.
I will try to see what actually is making problem today.
Click to expand...
Click to collapse
thank you
TWRP updated to 2.8.1.0
There are some problems with 2.8.1.0 recovery, download links removed, will try to fix ASAP
Rox said:
There are some problems with 2.8.1.0 recovery, download links removed, will try to fix ASAP
Click to expand...
Click to collapse
nice to see this..i have root on my s3 neo..just need TWRP and custom roms.
Just for the record: As Rox stated to me before, Read Only file system on /sdcard/ is indeed bug related to firmware version. I updated to latest and there is no issue any more.
_wook_ said:
Just for the record: As Rox stated to me before, Read Only file system on /sdcard/ is indeed bug related to firmware version. I updated to latest and there is no issue any more.
Click to expand...
Click to collapse
i have 4.4.2 version and that bug exists..there is no update for my phone..i have fixed it with a app and now its all ok.
smokerman said:
i have 4.4.2 version and that bug exists..there is no update for my phone..i have fixed it with a app and now its all ok.
Click to expand...
Click to collapse
What app did you used?
I downgraded my phone while ago to be able to root it and I kept old sw version. At the moment we have same sw version though.
_wook_ said:
What app did you used?
I downgraded my phone while ago to be able to root it and I kept old sw version. At the moment we have same sw version though.
Click to expand...
Click to collapse
i rooted my phone and im using sdfix from playstore.
Can I just flash SuperSU + KNOX Removal, directly from stock recovery, without flashing TWRP?
Thanks!
I think you cant .. you can try ..
CWM v6.0.5.1 recovery for S3 Neo
---------------------------------------------------------------------------------------------------------------------------------------------------------
Installation:
1st Method ( Flashable ZIP )
1. Download CWM flashable zip for S3 Neo and transfer it to your phone
2. Boot your device into recovery ( Vol Up + Home+ Power )
3. Install TWRP flashable zip
4. Now you have TWRP recovery on your device ( Boot with vol up + home + power )
2nd Method ( Odin method )
1. Download recovery.tar.md5
2. Download ODIN and Samsung USB drivers
3. Boot device in download mode ( Vol down + home + power )
4. Press volume up ( continue ) and connect phone with PC
5. Make sure Odin recognizes your phone ( There should write somethiing like "0:[COM11]" in first box and it will be yellow )
6. Press PDA and navigate to recovery.tar.md5
7. Make sure Re-partition is unchecked
8. Press "Start" and wait few seconds
9. Device will reboot and you will have CWM recovery on your device ( Boot with vol up + home + power )
3rd method ( Terminal emulator - requires rooted device )
1. Download cwm.img and transfer it to your phone ( i will use /sdcard but it is optional)
2. Download Terminal Emulator from playstore
3. Open Teminal emulator and type
NOTE: It is VERY IMPORTANT to write this correctly because you are risking to hard brick your device if you mistype number, double check before pressing enter
Code:
su
dd if=/sdcard/cwm.img of=/dev/block/mmcblk0p15
or to be 100% sure you can write this, effect is same
Code:
su
dd if=/sdcard/cwm.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Note: You can change path to recovery.img to your optional
4. Now you have TWRP recovery on your device ( Boot with vol up + home + power )
Enjoy!
---------------------------------------------------------------------------------------------------------------------------------------------------------
If you want to support my work you can donate me coffe. Use "Send payment" option on paypal ( [email protected] ) because "Donate" option is not available in my contry. Thanks.
---------------------------------------------------------------------------------------------------------------------------------------------------------
thanks work fine for me good job :good::good::good:
good job Rox and thank you
download link is broken
uzzo85 said:
download link is broken
Click to expand...
Click to collapse
tested just now link are work
spawk said:
tested just now link are work
Click to expand...
Click to collapse
thanks man, right now it work!!
I'm sorry but...although I have 11 posts, I still can't see the flashable zip link...
nicese said:
I'm sorry but...although I have 11 posts, I still can't see the flashable zip link...
Click to expand...
Click to collapse
+1
Sent from my GT-I9301I
There is no flashable zip file, only image file (3rd method) via adb/terminal emulator or via flashify & co.
Thanks, the 3rd method didn't work but I solved with Flashify :good:
Updated link in 3rd method, now cwm recovery is flashing and wiping faster ! And it can be installed on both variants ( GT-I9300I AND GT-I9301I )
thanks it worked perfectly and easily installed .
edit : damn it , flashing is realy fast
Now you can flash CWM using odin
Rox said:
CWM v6.0.5.1 recovery for S3 Neo
---------------------------------------------------------------------------------------------------------------------------------------------------------
Installation:
2nd Method ( Odin method )
1. Download recovery.tar
2. Download ODIN and Samsung USB drivers
3. Boot device in download mode...
---------------------------------------------------------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse
The recovery.tar link is dead. Can you reapload, please?
Edit: I think this is the new link
does it work for I9301I
Odin fails.
If I try to flash with odin the recovery.tar, it fails. I'm using GT-I9301I. Please help! Thanks!
I will check it...
Odin Stuck in Recovery.img using the recovery.tar given in the method 2.
Sorry for bother again Rox, but I can't install this CWM on my device. Odin fails
Odin file updated now, there shouldnt be troubles with odin flashing anymore
Background
I have a Note 7 (SM-930FD Exynos processor which is the version sold mainly in Singapore and Philippines) installed Note FE rom and running fine for month. For what ever reason last night I rebooted the phone and encounter the deadly 'Custom binary blocked by fro lock' (in red) message. After many hours in panic mode, this is how I manage to 'rescue' it. Credits to those folks who posted the solution. I am just posting this for the ease of those searching. Credits goes to those who posted the various file and methods.
Steps :
1. Download the stock rom from here : https://firmwarex.net/samsung-note-7-sm-n930f-stock-rom-flash-file/
- I use the file : FirmwareX.Net_SM-N930FD_N930FXXU2BPI7_N930FOLB2BPI5_XXV_6.0.1_Full.rar (2.3gb), download through google drive (fast)
- password is 'FirmwareX.Net'
- Getting the original firmware for your device is the most difficult step. Note 7 original firmware is not hosted on sammobile
2. Download Odin from : https://odindownload.com/download/
- I use SamsungOdin 3.12.3
- unzip all the file from the firmware .rar file
- there should be 5 .md5 files extracted from the firmware rar file.
- load the files into the correct box, file name starting with AP goes to AP, etc
- for your ease, see the Odin screenshot attached below
3. Boot your Note 7 into download mode
- hold [Power] + [Volume Down] + [Home Button]
- when presented with an option to go into recovery mode, press volume up
- Here is some instruction with pictures : https://www.fonepaw.com/solution/enter-samsung-recovery-download-mode.html
4. Plug the phone in. Click on the start button.
5. Once completed successfully it will auto reboot and you Note 7 will reboot into the original Samsung Rom.
- Note : all previous data will be gone! (there is no known way to save it - as far as I know. I am glad I am able to recover it the use of the phone).
- Highly recommended : enable developer mode and select OEM unlock to prevent future 'Custom Binary blocked by frp issue'
- See here for instruction : https://www.the***********.com/enable-oem-unlocking-on-android/
6. Rejoice and give thanks!
What's Next?
1. I installed TWRP boot for the ability to install custom rom : https://forum.xda-developers.com/note-7/development/recovery-official-twrp-galaxy-note-7-t3446047
2. I installed this Aurora ROM (Andriod 8) and it works perfectly on my SM-930FD (need to follow the instructions to the letter!).
3. Don't worry, now that you have the Original Samsung ROM for your SM-930FD device, any screw up you can use Odin to flash the original rom again! Never ever get bricked again! Hoorah!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official TWRP 3.6.1-* For Galaxy S20 / S20+ / S20 UltraOnly for exynos variants - G980F / G981B / G985F / G986B / G988B (Europe - Global, Single/Dual-SIM)
Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this recovery before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Kernel Features:
N986BXXU3FVC5 kernel source (OneUI 4.1 / March 2022 sourcecode)
disabled uh/defex/proca/knox/rkp/rooting protection/logging/audit/useless features
Recovery Features:
Android 11 tree
built in full 64 mode
toybox/busybox support
compatible with Android 12.0 and above
Downloads:
Galaxy S20 (x1s / G980F / G981B)
Galaxy S20+ (y2s / G985F / G986B)
Galaxy S20 Ultra (z3s / G988B)
AVB disabled vbmeta
* official TWRP builds are not up yet, you can find latest test builds in post #2, below
Instructions:
Odin (Windows)
Prerequisites: Samsung USB drivers, Odin v3.14.1
If you already have the bootloader unlocked you can skip to step 6.
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
Download appropriate TWRP .tar file according to your device
Download AVB disabled vbmeta .tar
Open Odin v3.14.1 and place the downloaded TWRP .tar file in AP tab, downloaded vbmeta .tar file in CP tab and click Start - once you press start grab the phone and press vol up + power to force it boot straight in TWRP after flashing
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
Heimdall (Linux)
Install heimdall & additional required packages:
Code:
sudo apt-get update
sudo apt-get install heimdall-flash android-tools-fastboot android-tools-adb libusb-0.1-4 libusb-1.0-0 libusb-1.0-0-dev
If you already have the bootloader unlocked you can skip to step 6.
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
Download appropriate TWRP .img file according to your device
Download AVB disabled vbmeta .img
Open your preferred terminal in linux and type (replace red lines with the path of downloaded img files):
Code:
sudo heimdall flash --RECOVERY /path/to/recovery.img --VBMETA /path/to/vbmeta.img
and press enter - once you press enter grab the phone and press vol up + power to force it boot straight in TWRP after flashing
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
TWRP
Download .img file for your device and install from your current TWRP with Install image - browse to image location and select - Recovery
dd (Requires root)
Download .img file for your device, place it in the root of your /sdcard folder, rename it to twrp.img then run the following commands via adb shell or a terminal emulator app:
Code:
su
dd if=/sdcard/twrp.img of=/dev/block/platform/13100000.ufs/by-name/recovery
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
Sources:
Device trees - x1s / y2s / z3s
Kernel - https://github.com/corsicanu/android_kernel_samsung_universal9830/tree/android-11.0
Recovery - https://github.com/omnirom/android_bootable_recovery
Credits:
TeamWin, geiti94, jesec, dyneteve, ianmacd, testers, donors and anyone else involved in making this possible
As always, if you like what i do, you can always send me some pizza/coffee/drugs/drinks or anything else via paypal.me/corsicanu
Compatibility and changelog:
06.05.2022 - Initial TWRP 3.6.1 release
Compatibility: Android 12 (OneUI 4.0 & 4.1)
Security patch: N/A
Misc links:
TeamWin official website
Telegram Support Group
Telegram Channel
Bootloaders / modems zips
Latest Magisk stable or canary
Further reading:
Full guide of how to unlock/root your device
Background on Android Verified Boot
Rollback protection
FAQ
Q: Can i use this recovery with other firmware then mentioned in compatibility?
A: Only with same Android version or Rollback protection might kick in and you won't be able to pass the lockscreen.
Q: Where do i get vbmeta.img?
A: From here, download the one you need according to install instructions.
Q: TWRP can't mount data partition, what to do?
A: Make sure you formatted data partition.
Q: Phone is not booting even after 20 minutes
A: Try to reboot. If still not booting, make sure you flashed multidisabler zip / formatted data partition.
Q: How to format data partition?
A:
Q: Phone is showing only Samsung logo
A: Try to reboot. If still not booting, consider installing an older TWRP build or a more recent firmware. If you still don't succeed, post here some details about your device and previous firmware and we might be able to help.
Q: Why do i need to format data partition?
A: Because old firmware encrypted your data partition and new rom can't decrypt and use that content / root needs access to data partition to place misc files / phone not booting after flashing root until data partition gets formatted.
Nice, many thanks for the development!
Updated first post with official pages from twrp.me, but since the builds are not up yet, i posted latest test builds in post #2.
Regards
corsicanu said:
Official TWRP 3.6.1-* For Galaxy S20 / S20+ / S20 UltraOnly for exynos variants - G980F / G981B / G985F / G986B / G988B (Europe - Global, Single/Dual-SIM)
Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this recovery before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Kernel Features:
N986BXXU3FVC5 kernel source (OneUI 4.1 / March 2022 sourcecode)
disabled uh/defex/proca/knox/rkp/rooting protection/logging/audit/useless features
Recovery Features:
Android 11 tree
built in full 64 mode
toybox/busybox support
compatible with Android 12.0 and above
Downloads:
Galaxy S20 (x1s / G980F / G981B)
Galaxy S20+ (y2s / G985F / G986B)
Galaxy S20 Ultra (z3s / G988B)
AVB disabled vbmeta
* official TWRP builds are not up yet, you can find latest test builds in post #2, below
Instructions:
Odin (Windows)
Prerequisites: Samsung USB drivers, Odin v3.14.1
If you already have the bootloader unlocked you can skip to step 6.
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
Download appropriate TWRP .tar file according to your device
Download AVB disabled vbmeta .tar
Open Odin v3.14.1 and place the downloaded TWRP .tar file in AP tab, downloaded vbmeta .tar file in CP tab and click Start - once you press start grab the phone and press vol up + power to force it boot straight in TWRP after flashing
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
Heimdall (Linux)
Install heimdall & additional required packages:
Code:
sudo apt-get update
sudo apt-get install heimdall-flash android-tools-fastboot android-tools-adb libusb-0.1-4 libusb-1.0-0 libusb-1.0-0-dev
If you already have the bootloader unlocked you can skip to step 6.
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
Download appropriate TWRP .img file according to your device
Download AVB disabled vbmeta .img
Open your preferred terminal in linux and type (replace red lines with the path of downloaded img files):
Code:
sudo heimdall flash --RECOVERY /path/to/recovery.img --VBMETA /path/to/vbmeta.img
and press enter - once you press enter grab the phone and press vol up + power to force it boot straight in TWRP after flashing
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
TWRP
Download .img file for your device and install from your current TWRP with Install image - browse to image location and select - Recovery
dd (Requires root)
Download .img file for your device, place it in the root of your /sdcard folder, rename it to twrp.img then run the following commands via adb shell or a terminal emulator app:
Code:
su
dd if=/sdcard/twrp.img of=/dev/block/platform/13100000.ufs/by-name/recovery
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
Sources:
Device trees - x1s / y2s / z3s
Kernel - https://github.com/corsicanu/android_kernel_samsung_universal9830/tree/android-11.0
Recovery - https://github.com/omnirom/android_bootable_recovery
Credits:
TeamWin, geiti94, jesec, dyneteve, ianmacd, testers, donors and anyone else involved in making this possible
As always, if you like what i do, you can always send me some pizza/coffee/drugs/drinks or anything else via paypal.me/corsicanu
Click to expand...
Click to collapse
Very good job, all working great.
Thanks bro
Zelo dobro delo, vse deluje odlično
Server down? Anybody else?
Great! Thank you so much!!
Edit: Everything's working so far (mtp too), S20+ (y2s) \m/
Seems to be down for G988B
inthedark22 said:
Server down? Anybody else?
View attachment 5607839
Click to expand...
Click to collapse
Few posts above i mentioned that pages are up but builds aren't ready yet.
I posted latest test builds on #2 post.
Possible to add support for SM-G981N?
Hello,
When flashing the multi disabler 3.2 there's a log message :
"Disabling restoration of stock recovery... Found /vendor/recovery-from-boot.p. Disabling... Failed."
Is it normal ?
EDIT : I rebooted and lost TWRP, when I went back into recovery it was the Android one.
naboum said:
Hello,
When flashing the multi disabler 3.2 there's a log message :
"Disabling restoration of stock recovery... Found /vendor/recovery-from-boot.p. Disabling... Failed."
Is it normal ?
EDIT : I rebooted and lost TWRP, when I went back into recovery it was the Android one.
Click to expand...
Click to collapse
I'm still trying to find the issue, for whatever reason multidisabler needs a second flash to work as far as i seen on my device. So for now please flash multidisabler 2 times in a row, until i find a better solution to this.
Regards
I did this with my S10e and S10 without a hitch. They were SM-G970F and SM-G973F. Now I have an S20, SM-G9810. I flashed Hong Kong firmware (CRC TGY), Android 11, G9810ZHS3DUL3 (because I am trying to use microG in place of play store, which I was able to do on both the previous S10 models).
This is not working. After I flash the magisk patched AP (with CP and CSC and BL), reboot to download, then TWRP (x1s) in AP and vbmeta_disabled in CP successfully, but when I hold Vol + and Bixby, this is the error I receive:
RPMB fuse Set
RPMB PROVISIONED
CURRENT BINARY: Custom (0x30F)
FRP LOCK : OFF
OEM LOCK : ON (U)
KG STATUS : CHECKING
WARRANTY VOID " 0x1 (0xE03)
QUALCOMM SECUREBOOT : ENABLE
RP SWREV : B3(1,1,1,3,1,1) K3 S3
SECURE DOWNLOAD : ENABLE
SPU(VALID):5
HDM STATUS : NONE
DID : 200412620E856811
I have USB debugging enabled. I have root access. But, I cannot use Odin to flash TWRP. I tried adb sideload also, even after granting ADB root permission in the magisk manager (but I don't know if that includes recovery ADB sideload). The recovery was the stock recovery as I cannot flash TWRP.
josephgrab said:
I did this with my S10e and S10 without a hitch. They were SM-G970F and SM-G973F. Now I have an S20, SM-G9810. I flashed Hong Kong firmware (CRC TGY), Android 11, G9810ZHS3DUL3 (because I am trying to use microG in place of play store, which I was able to do on both the previous S10 models).
This is not working. After I flash the magisk patched AP (with CP and CSC and BL), reboot to download, then TWRP (x1s) in AP and vbmeta_disabled in CP successfully, but when I hold Vol + and Bixby, this is the error I receive:
RPMB fuse Set
RPMB PROVISIONED
CURRENT BINARY: Custom (0x30F)
FRP LOCK : OFF
OEM LOCK : ON (U)
KG STATUS : CHECKING
WARRANTY VOID " 0x1 (0xE03)
QUALCOMM SECUREBOOT : ENABLE
RP SWREV : B3(1,1,1,3,1,1) K3 S3
SECURE DOWNLOAD : ENABLE
SPU(VALID):5
HDM STATUS : NONE
DID : 200412620E856811
I have USB debugging enabled. I have root access. But, I cannot use Odin to flash TWRP. I tried adb sideload also, even after granting ADB root permission in the magisk manager (but I don't know if that includes recovery ADB sideload). The recovery was the stock recovery as I cannot flash TWRP.
Click to expand...
Click to collapse
SM-G9810 is snapdragon, doesn't show up in supported devices either, so why did you even try this?
Finally, thanks so much for officially porting TWRP to the s20 exy family, been waiting since release .
i have the problem that i cant boot into system anymore after flashing twrp. it always boots to recovery.
factory restet or wipe date after flashing twrp didnt help.
btw ill try to install it to Android 11. shouldnt that work too? cant find any other working guide for twrp on S20 for Android 11
J0KER! said:
i have the problem that i cant boot into system anymore after flashing twrp. it always boots to recovery.
factory restet or wipe date after flashing twrp didnt help.
btw ill try to install it to Android 11. shouldnt that work too? cant find any other working guide for twrp on S20 for Android 11
Click to expand...
Click to collapse
What if you try multidisabler this time?
corsicanu said:
What if you try multidisabler this time?
Click to expand...
Click to collapse
oh of course i installed that too. forgot to mention.. still no success