Need some help, please. - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

I've got a SGS3 i747M. It was on the Bell network in Canada. It hasn't been used for awhile, so I thought I would get some use from it. I had the phone unlocked a few days ago. It was running Android 4.0.1. For most of it's use it ran custom roms. Never factory updated. I wiped it and installed via odin 3.12, the factory Android 4.0.1. It was running fine. So I thought I should root it. I got CF-Auto Root d2can-d2vl-sghi747m and unzipped it. This where I think I screwed up. In Odin 3.12 I put the .tar MD5 file the first box labelled BL. I think it was supposed to go into AP the second box. So now the phone won't boot, won't go into download mode and won't go into recovery mode. What happens when I press the 3 buttons to go into download mode is the phone will vibrate, I let go of the buttons and I see the Samsung logo and in the upper left hand corner of the screen some blue text. So is there anyway to save this phone??
Thanks,
Chevy

No download mode no fix.

You could try a USB jig but I don't think it will help.
You could also try the debrick method: https://forum.xda-developers.com/showthread.php?t=2660566
The Canadian s3 forum is here: http://forum.xda-developers.com/galaxy-s3-att
The only remedy may be to have it flashed using a hardware box like an Octopus.

I got it working again. I realized after I posted that it was in the wrong forum.

Related

[Q] did I brick my wifes phone?

Just got this phone for my wife and decided to root it for her. I have the note ii and had no problem with mine using the same method. I used the Samsung galaxy 3 toolkit v2.3.0. Chose option 2 for sprint and then option 2 rooting options. Then # 3 all in one. I already had the drivers on the pc and the phone was set for usb debugging. THe software flashed the phone but when it came back up I get the "samsung" boot screen then the sound of it booting up. The only problem it is a black screen with a blue led light. Thats it, tried to reboot into recovery and download mode but there is nothing there. just reboots to black screen. Now I do have one of those jtag usb ends I have order just in case I needed it and I can boot it into download mode and I can use odin but I have no idea what I need to do to "fix" it. Tried to use the recovery option in the toolbox but that didnt work. Also tried team epic's root tar file but that didnt work either and I am out of ideas. The only thing I know is my wife is going to kill me if I can't get this fixed.
Please help!
ps...since this phone is one day old if i cant fix it I would like to take it back to sprint for another one but I need some way to reset the counter using the download method only or I am hosed.
Q
quantum3 said:
Just got this phone for my wife and decided to root it for her. I have the note ii and had no problem with mine using the same method. I used the Samsung galaxy 3 toolkit v2.3.0. Chose option 2 for sprint and then option 2 rooting options. Then # 3 all in one. I already had the drivers on the pc and the phone was set for usb debugging. THe software flashed the phone but when it came back up I get the "samsung" boot screen then the sound of it booting up. The only problem it is a black screen with a blue led light. Thats it, tried to reboot into recovery and download mode but there is nothing there. just reboots to black screen. Now I do have one of those jtag usb ends I have order just in case I needed it and I can boot it into download mode and I can use odin but I have no idea what I need to do to "fix" it. Tried to use the recovery option in the toolbox but that didnt work. Also tried team epic's root tar file but that didnt work either and I am out of ideas. The only thing I know is my wife is going to kill me if I can't get this fixed.
Please help!
ps...since this phone is one day old if i cant fix it I would like to take it back to sprint for another one but I need some way to reset the counter using the download method only or I am hosed.
Q
Click to expand...
Click to collapse
I dont have my Galaxy S3 yet, but it sounds like all you would need is to flash a stock rom through odin. Look in the android development sub-forum and find a stock odinable rom.
I'm with the above poster. Try an odin repair.
And let this be a lesson to you. Don't mess with the wifey's toys, Murphy's law will bite you every time and she'll remember "forever" and dredge it up when you least expect it.
I hate Murphy's law...but you are so right.
I went to this thread:
http://forum.xda-developers.com/showthread.php?t=1774722
and downloaded SPR Image (JB 4.1.1) and it installed bootloader, system etc (the works) and when I rebooted it worked. I still don't have CWM and I dont even know if i have root BUT it works and I am now out of the doghouse! Thanks for all the help and if you think of anything else I need to know please tell me and thanks again...
PS.. installed goomanager and was able to get TWRP so the phone is rooted. next is the rom toolbox so I can back everything up!

SGH-I747 AT&T Softbricked Maybe Hard

Hi guys I just bought a SGH-I747 AT&T and the issue with it is it goes into Download mode just fine, works with Odin 3.7 loads a stock rom and then it sais reset but the phone doesn't reset just goes to black screen and then Odin sais Pass. I press the power button and Samsung appers and vibrates and goes back to black. When I try Recovery mode it show the blue writing on the left upper and the Samsung and then it goes to black screen. I put two different stock roms and same story. Kies won't recognize it and I installed recovery-clockwork-touch-6.0.4.3-d2att.tar to try to get into recovery mode and of course no luck. Don't know the history on this, so if anyone could help I would really appreciate it. Thanks in advance.
gica69 said:
Hi guys I just bought a SGH-I747 AT&T and the issue with it is it goes into Download mode just fine, works with Odin 3.7 loads a stock rom and then it sais reset but the phone doesn't reset just goes to black screen and then Odin sais Pass. I press the power button and Samsung appers and vibrates and goes back to black. When I try Recovery mode it show the blue writing on the left upper and the Samsung and then it goes to black screen. I put two different stock roms and same story. Kies won't recognize it and I installed recovery-clockwork-touch-6.0.4.3-d2att.tar to try to get into recovery mode and of course no luck. Don't know the history on this, so if anyone could help I would really appreciate it. Thanks in advance.
Click to expand...
Click to collapse
I found out that the phone had 4.1.1 on it and the guy tried to flash 4.2.2 and upon doing the odin mode flashing odin gave Firmware upgrade encountered an issue Please select recovery mode in Kies & try again So these are just some helpful facts for anyone who has gone through it. Thanks in advance for any help
gica69 said:
I found out that the phone had 4.11 on it and the guy tried to flash 4.22 and upon doing the odin mode flashing odin gave Firmware upgrade encountered an issue Please select recovery mode in Kies & try again So these are just some helpful facts for anyone who has gone through it. Thanks in advance for any help
Click to expand...
Click to collapse
What firmware were you trying to flash via Odin and are you sure the seller didn't previously flash (or try to flash) the 4.3 on it? If it wasn't higher than 4.3, then you may try recovery via Kies as follows ....
Install and launch Samsung Kies on your PC (not Kies 3). Open the Tools menu and select Firmware Upgrade and Initialization
Do not connect your phone to your PC yet. Remove the battery cover and record device info written in the battery compartment
In Kies, enter your phone model (SGH-I747)
Enter the phone serial number and click OK to all the security questions. Follow all the instructions on Kies
Connect the phone when prompted and follow the rest of the instructions
Wait for firmware upgrade to complete
Good luck!
If this doesn't work, then you may try flashing the 4.1.1 stock image via Odin. Look for the correct stock image via the following thread ...
http://forum.xda-developers.com/showthread.php?t=1739426
The one you want for Samsung Galaxy S3 AT&T (4.1.1) is I747UCDLK3
PLEASE don't try any of the above if you were already on the 4.3 bootloader as things will only get worse.
Larry2999 said:
What firmware were you trying to flash via Odin and are you sure the seller didn't previously flash (or try to flash) the 4.3 on it? If it wasn't higher than 4.3, then you may try recovery via Kies as follows ....
Install and launch Samsung Kies on your PC (not Kies 3). Open the Tools menu and select Firmware Upgrade and Initialization
Do not connect your phone to your PC yet. Remove the battery cover and record device info written in the battery compartment
In Kies, enter your phone model (SGH-I747)
Enter the phone serial number and click OK to all the security questions. Follow all the instructions on Kies
Connect the phone when prompted and follow the rest of the instructions
Wait for firmware upgrade to complete
Good luck!
If this doesn't work, then you may try flashing the 4.1.1 stock image via Odin. Look for the correct stock image via the following thread ...
http://forum.xda-developers.com/showthread.php?t=1739426
The one you want for Samsung Galaxy S3 AT&T (4.1.1) is I747UCDLK3PLEASE don't try any of the above if you were already on the 4.3 bootloader as things will only get worse.
Click to expand...
Click to collapse
I have already tried the I747UCDLK3 not from the link you gave me though. I did notice that the one you mentioned is a rooted stock do you think I should still do it? The rom flashes fine no errors in Odin but when it sais RESET the phone turns off the download mode and vibrates once then goes black then later Odin sais Pass but I cannot start it it just bootloops and vibrates and it stays that way As far as the Kies procedure you gave me don't I have to be in recovery mode for it to see the phone? I cannot get to that mode just download mode. Let me know thanks for your help
gica69 said:
I have already tried the I747UCDLK3 not from the link you gave me though. I did notice that the one you mentioned is a rooted stock do you think I should still do it? The rom flashes fine no errors in Odin but when it sais RESET the phone turns off the download mode and vibrates once then goes black then later Odin sais Pass but I cannot start it it just bootloops and vibrates and it stays that way As far as the Kies procedure you gave me don't I have to be in recovery mode for it to see the phone? I cannot get to that mode just download mode. Let me know thanks for your help
Click to expand...
Click to collapse
If you were successful in flashing via Odin, I would have suggested you try doing a hard wipe/reset in recovery. However, you said you can't get to recovery mode so this may not work. What happens when you try booting into recovery mode?
For Kies, you wouldn't have to be in recovery mode for the firmware restore to happen. Normally, you would have to connect your (powered-on) phone to your PC for it to be recognized by Kies. However, as you can't power on, we are forcing Kies to prepare the specific required firmware for your device by manually entering in the device information. Thus, when the phone is connected, you have firmware ready to make it work.
It may also be that the firmware you downloaded and flashed via Odin may not be the correct or full version. There are so many sources of "stock" firmware these days that one can never be too sure. You may go to Sammobile.com to download the stock firmware and compare the size of the extracted file to the one you used. The odin flashable tar.md5 file should be about 1.1Gb in size.
Larry2999 said:
If you were successful in flashing via Odin, I would have suggested you try doing a hard wipe/reset in recovery. However, you said you can't get to recovery mode so this may not work. What happens when you try booting into recovery mode?
For Kies, you wouldn't have to be in recovery mode for the firmware restore to happen. Normally, you would have to connect your (powered-on) phone to your PC for it to be recognized by Kies. However, as you can't power on, we are forcing Kies to prepare the specific required firmware for your device by manually entering in the device information. Thus, when the phone is connected, you have firmware ready to make it work.
It may also be that the firmware you downloaded and flashed via Odin may not be the correct or full version. There are so many sources of "stock" firmware these days that one can never be too sure. You may go to Sammobile.com to download the stock firmware and compare the size of the extracted file to the one you used. The odin flashable tar.md5 file should be about 1.1Gb in size.
Click to expand...
Click to collapse
When I go in recovery it shows blue writing in left upper corner and Samsung logo and then black screen. I think I did use the Sammobile firmware at 1.1. My clock in download mode shows 6. I don't think that would affect it though. Could it be that Odin doesn't really write the firmware that's why flashing doesn't change anything? I don't think the jig would do anything maybe sending it for a jtag reflash is the trick.
I am lost for now. If you guys can think of anything new let me know and thanks again.
gica69 said:
When I go in recovery it shows blue writing in left upper corner and Samsung logo and then black screen. I think I did use the Sammobile firmware at 1.1. My clock in download mode shows 6. I don't think that would affect it though. Could it be that Odin doesn't really write the firmware that's why flashing doesn't change anything? I don't think the jig would do anything maybe sending it for a jtag reflash is the trick.
I am lost for now. If you guys can think of anything new let me know and thanks again.
Click to expand...
Click to collapse
You didn't mention if you tried the Kies option. I had a similar problem once when upgrade to 4.1.1 via Kies failed during the process and that was how I was able to recover. However, since you bought this from the secondary market, there is no way of telling for certain what the previous owner did wrong which would have been useful for recovery options.
One of the nice things about Odin is that you usually know the results immediately. If it says Pass, therefore, that's likely what it means. So Odin did flash something. But what did it flash? The counter you saw in download mode shows how many custom system installations there have been and 6 does show there has been some previous heavy tinkering with the phone. As you are still able to get into download modes, I would suggest you try flashing custom recovery (TWRP or CWM) via Odin. If this works and you are able to get into recovery mode, you may then try doing a hard wipe/reset via recovery. You may also try flashing the other (rooted) 4.1.1 file via Odin. At this stage, you really have nothing to lose in trying all options. I guess if you can get into recovery mode, the problem is almost solved as this leaves plenty of options.
A jig wouldn't help as that only gets you to download mode which, for now, you don't have a problem with. JTag should always be a last resort option only. Let me know how far it goes and good luck!
When flashing in Odin, did you check auto reboot? If you did, try flashing again but uncheck auto-reboot. When you see Reset in the status windows, disconnect the USB cable, pull out the battery, wait a few seconds until the phone completely shuts down, put back in the battery, get into recovery, wipe cache, do a factory reset, and reboot.
audit13 said:
When flashing in Odin, did you check auto reboot? If you did, try flashing again but uncheck auto-reboot. When you see Reset in the status windows, disconnect the USB cable, pull out the battery, wait a few seconds until the phone completely shuts down, put back in the battery, get into recovery, wipe cache, do a factory reset, and reboot.
Click to expand...
Click to collapse
This damn phone is starting to annoy me. I can still get into download mode but my phone gets usb device not recognized now. I have access to another I747 phone so my question is if I have access to the pit file from that phone can anything be done with the Debrick utility and a SD card with only download mode access? Thanks in advance.
Go into download and let us know what is shown on the screen.
audit13 said:
Go into download and let us know what is shown on the screen.
Click to expand...
Click to collapse
Odin Mode
Product Name: SGH-I747
Custom Binary Downloads: Yes (6 Counts)
Current Binary: Samsung Official
System Status: Official
Qualcomm Secure Boot: Enable
Green Android Icon Downloading...
Do not turn off target!!!
OK I plugged the USB in and out a few times and it allows to write every few tries. Back to my question can I do something in download mode if I have another i747 that I can copy stuff from? I also tried the suggestion to uncheck auto-reset pull the usb cable then the battery and try to go to recovery but it doesn't.Any suggestions are welcomed.
Try flashing a stock 4.1.1 rom from sammobile using Odin. Do not check auto reboot. When you see reset in the status window, disconnect the usb cable, pull the battery, replace the battery, boot into recovery, and wipe. I have done this numerous times on my i747m after flashing custom ROMs.
audit13 said:
Try flashing a stock 4.1.1 rom from sammobile using Odin. Do not check auto reboot. When you see reset in the status window, disconnect the usb cable, pull the battery, replace the battery, boot into recovery, and wipe. I have done this numerous times on my i747m after flashing custom ROMs.
Click to expand...
Click to collapse
I will try it again I think I already did but when I put the battery back and click the Vol+ Home Power I get the blue writing and then black screen. Should I wait like 10 min on the black screen or it should be quick. Thanks
Keep holding the buttons until the blue writing disappears and the green android appears with the green progress bar.
audit13 said:
Keep holding the buttons until the blue writing disappears and the green android appears with the green progress bar.
Click to expand...
Click to collapse
Is there an unbrick.img for 4.1.1 or 4.1.2 I noticed that there are files for 4.3 that allow you to go in recovery and erase stuff reinstall. Let me know cause I sure couldn't find it.
If u can get it into download mode u are never ever hard bricked my friend...take it from a guy who had to dust off his old galaxy sll last weekend & still can't get into d/l mode on my s3 after a week & even with a jig lol
Sent from my SGH-T989 using xda app-developers app
gica69 said:
Is there an unbrick.img for 4.1.1 or 4.1.2 I noticed that there are files for 4.3 that allow you to go in recovery and erase stuff reinstall. Let me know cause I sure couldn't find it.
Click to expand...
Click to collapse
The unbricking image only helps you get into download mode from where you can work your way up the rest of the food chain. As you can already get into download mode without difficulties, I doubt if that's what you really need. You are also able to flash ROMs successfully in download mode via Odin so you've gone far up on the food chain already. Perhaps you are not doing the recovery thing correctly enough. Like Audit said, you need to continue holding down the Volume Up and Menu buttons whilst releasing the Power button after you see the first flash until the recovery menu appears and then do a hard wipe/reset.
Perhaps you could also try flashing TWRP via Odin if CWM isn't working.
Larry2999 said:
The unbricking image only helps you get into download mode from where you can work your way up the rest of the food chain. As you can already get into download mode without difficulties, I doubt if that's what you really need. You are also able to flash ROMs successfully in download mode via Odin so you've gone far up on the food chain already. Perhaps you are not doing the recovery thing correctly enough. Like Audit said, you need to continue holding down the Volume Up and Menu buttons whilst releasing the Power button after you see the first flash until the recovery menu appears and then do a hard wipe/reset.
Perhaps you could also try flashing TWRP via Odin if CWM isn't working.
Click to expand...
Click to collapse
I already tried holding the Home and Volume up buttons for 4-5 minutes at which point my fingers got a bit tired. The reason I wanted the unbrick.img is that I am now having issues with the computer recognizing the device in usb. I plugged and unplugged so many times that it no longer works that way so I wanted to do it via sd card. The unbrick.img gets you in recovery mode and download mode as it allows you to boot from the card not from the internal HD. But the only ones I have seen are for the 4.3 issues. And I tried It but did not put my device in recovery.
gica69 said:
I already tried holding the Home and Volume up buttons for 4-5 minutes at which point my fingers got a bit tired. The reason I wanted the unbrick.img is that I am now having issues with the computer recognizing the device in usb. I plugged and unplugged so many times that it no longer works that way so I wanted to do it via sd card. The unbrick.img gets you in recovery mode and download mode as it allows you to boot from the card not from the internal HD. But the only ones I have seen are for the 4.3 issues. And I tried It but did not put my device in recovery.
Click to expand...
Click to collapse
I couldn't find one either although you may be able to create yours using the command line posted in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2549068
You may also try using a jig to get back into download mode. Have you, however, considered exercising any buyer protection options you have on the phone since, it would appear, the guy sold you a lemon?

[Q] galaxy s3 I747 wont boot past Samsung Galaxy s3 Logo, Did i brick my phone???

I was trying to carrier unlock my phone, and to do that i tried to downgrade it 4.3 to 4.1.1, and only after i had pressed the button, i had noticed that this might brick my phone in a comment in one of the forums, this is what i did:
http://forum.xda-developers.com/showthread.php?t=2625461
after following this and trying to run odin with it, odin returned "FAIL", and due to my high level of stupidity at the time, i tried to use the original 4.1.1 as my PDA in odin right after, i didnt reboot or anything, just pressed start again with the other tar.md5 file....
so now i cannot go past the samsung galaxy s3 logo when booting. I CAN go into download mode though, but i have no clue what i am supposed to do afterwards
i have the Galaxy S 3 i747 (was 4.3 before the whole mess) at&t carrier, i am trying to unlock it because i am travelling and need a phone.
please help me fix it, i do not care about the warranty since i dont have it anymore anyways, as long as the phone is working
also, if possible, i also need to unlock it afterwards, any help is HIGHLY appreciated, thanks!
baruchadi said:
I was trying to carrier unlock my phone, and to do that i tried to downgrade it 4.3 to 4.1.1, and only after i had pressed the button, i had noticed that this might brick my phone in a comment in one of the forums, this is what i did:
http://forum.xda-developers.com/showthread.php?t=2625461
after following this and trying to run odin with it, odin returned "FAIL", and due to my high level of stupidity at the time, i tried to use the original 4.1.1 as my PDA in odin right after, i didnt reboot or anything, just pressed start again with the other tar.md5 file....
so now i cannot go past the samsung galaxy s3 logo when booting. I CAN go into download mode though, but i have no clue what i am supposed to do afterwards
i have the Galaxy S 3 i747 (was 4.3 before the whole mess) at&t carrier, i am trying to unlock it because i am travelling and need a phone.
please help me fix it, i do not care about the warranty since i dont have it anymore anyways, as long as the phone is working
also, if possible, i also need to unlock it afterwards, any help is HIGHLY appreciated, thanks!
Click to expand...
Click to collapse
Downgrading your boot loader from 4.3 is a guaranteed brick. I'm not sure if the brick will get you to the Samsung screen.
If you're already assuming its bricked reboot into recovery and do a full wipe. Restore a nandroid of something if you have one or try flashing a custom ROM. Because Odin failed maybe it never flashed the boot loader.
Worth a try
Sent from my SGH-I747M using XDA Free mobile app
baruchadi said:
I was trying to carrier unlock my phone, and to do that i tried to downgrade it 4.3 to 4.1.1, and only after i had pressed the button, i had noticed that this might brick my phone in a comment in one of the forums, this is what i did:
http://forum.xda-developers.com/showthread.php?t=2625461
after following this and trying to run odin with it, odin returned "FAIL", and due to my high level of stupidity at the time, i tried to use the original 4.1.1 as my PDA in odin right after, i didnt reboot or anything, just pressed start again with the other tar.md5 file....
so now i cannot go past the samsung galaxy s3 logo when booting. I CAN go into download mode though, but i have no clue what i am supposed to do afterwards
i have the Galaxy S 3 i747 (was 4.3 before the whole mess) at&t carrier, i am trying to unlock it because i am travelling and need a phone.
please help me fix it, i do not care about the warranty since i dont have it anymore anyways, as long as the phone is working
also, if possible, i also need to unlock it afterwards, any help is HIGHLY appreciated, thanks!
Click to expand...
Click to collapse
Welcome to the forum! Wished you'd come in much earlier though as you would have found you CANNOT downgrade from 4.3 to 4.1.1 to free unlock. Sorry, but once you are on 4.3, the surest way to unlock is to obtain the unlock code from the carrier or purchase one online. Sounds like you do have a soft brick. If your phone is still booting to the Samsung logo, then it's only a soft brick. Attempting to downgrade the 4.3 bootloader usually results in a hard brick so you may be in luck.
To fix this first, try to see if you can boot to recovery mode and do a hard wipe/factory reset. If you are able to boot to recovery (or download) mode then you have little to worry about. If the reset does not work, you can flash custom recovery via Odin and follow the instructions in the thread below to restore stock 4.3. Afraid, you have to revert to full stock 4.3 to get the phone back in working order and don't even think about 4.1.1.
http://forum.xda-developers.com/showthread.php?t=2658486
If you are not able to get to recovery, then you can see if you can boot from a debrick image following the instructions (on the first page) of the thread below ...
http://forum.xda-developers.com/showthread.php?t=2549068
Once your phone is working normally, you can request the unlock code from AT&T via the request form below. If eligible, they should provide this. Otherwise, you would have to buy one online ....
https://www.att.com/deviceunlock/client/en_US/
Let me know if you need any further help.
KorGuy123 said:
Downgrading your boot loader from 4.3 is a guaranteed brick. I'm not sure if the brick will get you to the Samsung screen.
If you're already assuming its bricked reboot into recovery and do a full wipe. Restore a nandroid of something if you have one or try flashing a custom ROM. Because Odin failed maybe it never flashed the boot loader.
Worth a try
Sent from my SGH-I747M using XDA Free mobile app
Click to expand...
Click to collapse
I tried wiping everything, i also wiped cache, still didn't boot, thanks though!
Larry2999 said:
Welcome to the forum! Wished you'd come in much earlier though as you would have found you CANNOT downgrade from 4.3 to 4.1.1 to free unlock. Sorry, but once you are on 4.3, the surest way to unlock is to obtain the unlock code from the carrier or purchase one online. Sounds like you do have a soft brick. If your phone is still booting to the Samsung logo, then it's only a soft brick. Attempting to downgrade the 4.3 bootloader usually results in a hard brick so you may be in luck.
To fix this first, try to see if you can boot to recovery mode and do a hard wipe/factory reset. If you are able to boot to recovery (or download) mode then you have little to worry about. If the reset does not work, you can flash custom recovery via Odin and follow the instructions in the thread below to restore stock 4.3. Afraid, you have to revert to full stock 4.3 to get the phone back in working order and don't even think about 4.1.1.
http://forum.xda-developers.com/showthread.php?t=2658486
If you are not able to get to recovery, then you can see if you can boot from a debrick image following the instructions (on the first page) of the thread below ...
http://forum.xda-developers.com/showthread.php?t=2549068
Once your phone is working normally, you can request the unlock code from AT&T via the request form below. If eligible, they should provide this. Otherwise, you would have to buy one online ....
https://www.att.com/deviceunlock/client/en_US/
Let me know if you need any further help.
Click to expand...
Click to collapse
I am able to get to recovery, but the first link isn't very clear.... i am not really familiar with odin and all this other stuff... lol, i am now downloading the files it says to download in the first link though, can you maybe tell me in a quick list what exactly im supposed to do?
thanks!
baruchadi said:
I tried wiping everything, i also wiped cache, still didn't boot, thanks though!
I am able to get to recovery, but the first link isn't very clear.... i am not really familiar with odin and all this other stuff... lol, i am now downloading the files it says to download in the first link though, can you maybe tell me in a quick list what exactly im supposed to do?
thanks!
Click to expand...
Click to collapse
It's time to start reading. Before doing any flashing/modding, you should make sure you understand what you're doing and know the risks.
Now as for Odin, it's quite straight forward. Phone needs to be in download mode, you put the PDA file in Odin and flash (if it's a Odin one-click, just need to hit start). One thing is to not interrupt it! Especially if flashing bootloaders cause that will brick your phone. Also, don't downgrade bootloaders.
There are a few guides in the sticky, I suggest you take an hour or two reading them so things like that don't happen again (or that you know what to do if it does).
GL!
baruchadi said:
I tried wiping everything, i also wiped cache, still didn't boot, thanks though!
I am able to get to recovery, but the first link isn't very clear.... i am not really familiar with odin and all this other stuff... lol, i am now downloading the files it says to download in the first link though, can you maybe tell me in a quick list what exactly im supposed to do?
thanks!
Click to expand...
Click to collapse
Alright. If wipe/reset didn't work, you'll need to restore full stock 4.3 via custom recovery. Here's what we need to do....
1) Download the Odin flashable *.Tar file for custom recovery. I prefer TWRP because of the GUI so that's where I'm pointing you to ...
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
2) Download the stock restore file for 4.3 from the thread below... If you are using TWRP, then the first link is the one you need
http://forum.xda-developers.com/showthread.php?t=2658486
3) Copy the stock restore zip file to a good quality (micro) SD card
4) I presume you have Odin already so you will use this to flash custom recovery to your phone. Run Odin.exe on your PC. If you are using Odin v.3.09 then you need the AP tab. For all other versions, use the PDA tab. Navigate to the custom recovery *.Tar file you downloaded earlier and place this in the PDA (or AP tab). Leave the default settings as is and do not check/uncheck any boxes other than the default settings.
5) Boot the phone to download mode via the 3-button combo (Volume Down/Home/Power). When you get to Odin (Download) mode, press volume up to continue. Connect the phone to your PC with a good quality micro USB cable. Wait until Odin has recognized the device then click on the Start button to start firmware installation (flashing). Wait for the flashing to end and the <Pass> message. Disconnect the phone from the PC and pull the battery to stop auto reboot.
6) Place the micro SD card with the stock restore zip in your phone. Replace the battery and boot to recovery mode. If you were successful with the firmware flashing above, it should boot you to custom recovery.
7) Select install from external card and navigate to the stock restore zip file. Select this file and swipe the screen to start firmware installation. Wait for installation to complete. Then clear your cache/dalvik and reboot to system.
This will hopefully do it.

[Q] help - i think my phone is temporary bricked

hi,
so i just got my s6 edge for sprint shipped to me (it wasn't activated to any service when i got it). here is the order of events i took:
1) tried to activate my service, but there was a delay in porting the #
2) while waiting for them to port it, i rooted it, installed twrp and a rom (this was when it was on 5.0.2)
3) they called and said they were ready to port, but the new rom didn't have the activation software in it. so i stalled them and said i would call back. i then reverted back to stock using odin.
4) got the number ported and was fine using the phone at that point.
5) this is where the day turned bad...... i didn't realize that coincidentally today, a new firmware was released to 5.1.1 and the phone auto-updated to it while i wasn't looking
6) i went to go re-root it using the same 5.02 root and now my phone is stuck. it's sitting on the "Samsung Galaxy S6 Edge, Powered by Android" screen and in the top left in red it says "RECOVERY IS NOT SEANDROID ENFORCING"
7) i tried to restore it back to the stock using odin, but it errored in the download mode (i don't remember the error off hand)
i can get into download mode, and that's about it. i had to let the phone's battery die on it's own to turn it off (this phone gets super hot, btw)
so i guess what i need to know is how to restore back to factory default again, now that it thinks it's on 5.1.1. is there any hope?
I'm in the same boat as you, I think the only hope is to wait until the firmware is available to download and install it via Odin. Let me know if you've had any luck getting it up and running again. I had to switch back to my old phone for the time being.
bbacon said:
I'm in the same boat as you, I think the only hope is to wait until the firmware is available to download and install it via Odin. Let me know if you've had any luck getting it up and running again. I had to switch back to my old phone for the time being.
Click to expand...
Click to collapse
check this post, download the tar and flash it in odin. it worked for my phone!
http://forum.xda-developers.com/showpost.php?p=61650724&postcount=142
it got me into a recovery image that worked and i was able to factory reset in there. my phone is booting properly now. (after it reboots when done, it took a bit on the first title screen to do anything, just be patient)
Thanks man, that worked great. Although I found out in the process of trying to fix it the past few days, I must have flashed a non-compatible kernel because once it boots the touch screen is unresponsive. I guess I'll have to wait until the firmware download is available after all. Thanks again for the help though

Failed to mount /data and frozen after factory reset, HELP!

I have what's probably a unique situation, though I hope not. For background info, I bought two I747s, one white and one blue, each with issues, but I intended to put parts together to end up with one good one.
When I did a factory reset on the blue one via the recovery menu, it returned a bunch of errors along the lines of "failed to mount /data." Then when it rebooted it would hang on the Samsung logo. Back in recovery mode it returns more of the same errors just booting into recovery mode, and factory reset still returns more of the same errors and doesn't fix anything. I flashed 4.3 with Odin in an attempt to fix it, but I got the boards mixed up, and that one had 4.4 on it, not 4.1 like I thought. I'm pretty sure it's hard bricked now (that whole can't downgrade thing) because it's unresponsive to everything. Though my computer does recognize that it's plugged in, more on that later.
So I figured, fine, I screwed up, I'll just use the other board with 4.1 on it from the white phone. Except when I did a factory reset on that one, it did the exact same thing! Same errors, same problem stuck at the Samsung logo. Except this time I'm not flashing sh*t until I know exactly what I need to do to fix it. In another post where the guy had the same issue with 4.1.1, it was solved by flashing 4.3 with Odin. And another post where the guy had no idea what version he had, he just knew it was lower than 4.3, his problem was also solved by flashing 4.3, But since my last efforts failed miserably, I'm very reluctant to try it until I get some knowledgeable input. I don't remember exactly which version is on there, it's 4.1.something. I'd also prefer not to upgrade beyond 4.1 because I'd like to unlock it and from what I'm reading you can only do it for free if you're on 4.1. So I guess I need a link to an Odin flashable 4.1 package?
As for the poor blue phone that used to have 4.4.something, and was mistakenly flashed with 4.3, I've heard about JTAG but I don't quite understand it, and I'm not sure it would work in my case since a lot of what I'm reading says that bricking which occurs from downgrading is often unfixable. However, Windows recognizes that a device is plugged in when I attach it via USB. It shows up in the Device Manager as QHSUSB_DLOAD. I am currently researching more on this and the method of booting from an SD card, except I don't have an SD card reader at the moment.
Any assistance, advice, links, information, and plain ole encouragement are always welcome and appreciated.
For the phone running 4.1, flash any stock rom in Odin. After flashing, boot into recovery and perform a factory reset, then boot the phone and use the free method to sim unlock. The important thing is to have the stock 4.1.1 dialler in order to access the hidden menu options?
For home hard bricked phone, you will have to try the debrick image method. If it doesn't work, a jtag service should be able to force flash a rom to the phone.
Wow, that was like a crazy fast reply!
What if the phone is 4.1.2? Can I still flash 4.1.1? I'm on the hunt for a 4.1.1 stock rom now.
Yes, you can flash 4.1.1 from 4.1.2.
audit13 said:
Yes, you can flash 4.1.1 from 4.1.2.
Click to expand...
Click to collapse
Apparently not always. I downloaded and flashed 4.1.1 with Oden 3.07, it rebooted, showed the android image like it was updating, progress bar finished, and then it just went blank. Now both phones are in the same condition of being hard bricked and showing QHSUSB_DLOAD in the device manager.
This is strange. I have downgraded approximately 10 i747m phones from 4.1.2 to 4.1.1, unlocked using the free method, and re-flashed back to 4.1.2 after unlocking.
http://forum.xda-developers.com/showthread.php?t=2371897
What options did you check in Odin? Where did you get the 4.1.1 ROM? I ask because the stock ATT 4.1.1 rom was apparently removed from sammobile.com.
How did you confirm that the phone was running 4.1.2?
I checked only auto reboot in Odin.
I found this link sammobile.com/firmwares/database/SGH-I747/ in this thread http://forum.xda-developers.com/galaxy-s3-att/help/downgrade-att-running-stock-4-4-2-rom-t3170938 , 7th post
The download was going absurdly slow, so I googled the exact file name being downloaded which was, I747UCDLK3_I747ATTDLK3_ATT, and found a google drive link at https://drive.google.com/file/d/0B_UTWXKFnZoNVFdSVjJEZlMwZjA/edit which was the first result after searching for the file name if that link doesn't work. I'm downloading the slow one now to compare it to the one I got from google drive.
I'm unsure if the phone was 4.1.1 or 4.1.2, that's why I asked if it's possible to flash 4.1.1 on top of 4.1.2. I was only trying to do a factory reset originally and had no intentions of flashing anything. I just wanted to wipe out all the crap on it from the previous user so I had only glanced at the version out of curiosity to see if it was unlockable via the free method. I remember it was 4.1.something.
I have an SD card reader on order. Hopefully I'll be able to unbrick one of them.
Do you, or anyone else, have any idea why a simple factory reset would cause errors like I described and then hang on reboot? At that point both phones were 100% factory and I hadn't done anything to them except put a battery in them to power them on. I've done a factory reset on four other S3s and this didn't happen.
It is definitely possible to flash 4.1.1 over 4.1.2 because the bootloader could not be downgraded until the mjb version.
That's what I've been reading. So where did I go wrong? Any idea why a factory reset would screw up like that?
Did you confirm the bootloader before flashing?
audit13 said:
Did you confirm the bootloader before flashing?
Click to expand...
Click to collapse
No, because I had no intentions of flashing it when I tried to do a factory reset. Then after that went bad it wouldn't boot, and I don't know how to check the boatloader when a phone will only go into recovery mode.
Where did you see reference to 4.1? It's possible that the modem or baseband was 4.1 but the bootloader was 4.3.
Under about device and then Android version. The one where if you tap it a lot you get the jellybean android that pops up. It wasn't the baseband version because that's a much longer number with the model number in it.
That screen doesn't tell you the bootloader.
As I said, I didn't check for the bootloader version before I ran into trouble because I only wanted to do a factory reset and I didn't intend to flash anything. I wouldn't imagine that it would have a different bootloader than the OS version unless that can happen without any user intervention because the previous owner was only concerned with selfies and games. She certainly didn't modify anything.
I cant explain what happened. This has never happened to me after flashing about 10 phones.
I believe it has something to do with the errors that were produced while trying to do a factory reset. What bothers me is that both phones did the exact same thing. Normally I'd say it was something I did, except that I didn't do anything but put a battery in them, boot up, find lots of junk installed, and then attempt a factory reset. On the first phone, I rebooted into recovery and tried it from there. On the second phone I tried it from inside the OS. Same results on both. The phones ran fine before that.
Any advice on how to do the boot from an SD card, or how to do the JTAG thing? I've been reading a lot but the information jumps around a lot. I'm comfortable with soldering and have an IT background if that helps.
It's possible that the recovery was corrupt or the partitions were corrupt.
Whenever I factory reset a phone, I always boot into recovery to do that, not from within the ROM.
Sounds to me like you did nothing wrong.
Did the previous owner have the phone from the time it was new?
Edit: for the phone that you flashed with 4.1.1, Odin said "pass" in the status window and the it auto rebooted?
audit13 said:
Did the previous owner have the phone from the time it was new?
Edit: for the phone that you flashed with 4.1.1, Odin said "pass" in the status window and the it auto rebooted?
Click to expand...
Click to collapse
I don't know for sure if she had it from new. Yes, for both phones Odin said pass in the window and then it rebooted. I had walked away when Odin finished with the first phone. I came back and it was dead. The second one I watched and it showed the android with the wireframe in his guts and the progress bar which moved across, and then it just went blank.
There were error messages about the partitions when I did the factory reset IIRC. Perhaps the recovery or the partition was corrupted like you said. It's just odd that both had the exact same identical problem with the exact same results. That's why I think that it must have been something I did, except that I didn't DO anything other than initiate a factory reset.
I took an i747m and reflashed stock the Telus 4.4.2 ROM.
In download mode, you should see the green Android guy with the words "Downloading...Do not turn off target" and a blue progress bar moving from left to right.
I did not check reset in Odin. Once it finished flashing the ROM, I removed the USB cable, removed the battery, replaced the battery, and booted the phone. I the Android guy with the wire frame for a few seconds, the screen went blank, and the phone started up with the Samsung logo.
Since you were getting errors with mounting the different partitions, you may have needed to flash the PIT and PDA files but I can't really say for sure as I have never encountered this problem.
I normally verify everything before I use Odin because phones that I have been given to fix have had all sorts of weird configurations.
You'll have to try the debrick guide. of use a jtag service. You could also do what I did and that is to look for people with phones that have a damaged screen and buy they at a steep discount.

Categories

Resources