Related
Okay, let’s get this out of the way first. These are minimalist cases! They’re meant for people who would prefer going bare back, because the best is nothing at all. Scuffs, scratches, and the last time you looked, things that just shouldn’t be there, no protection can be too risky. Even though that’s what you want.
A hardcase gives you the absolute minimum coverage, so it can be as close to nothing as possible.
They won’t protect well against drops with any substantial height, drunk stumbling Friday nights, Nexus Frisbee, or if your name happens to be Freddy Fumblefingers. Please buy something softer, thicker, rubberier, or with multiple layers, because sir or madam, these cases will not be able to keep up with you.
They will protect well against scrapes, dirty tables, fake bumping into people to say “hello”, or if your better half has long sharp nails and you need a protective shield.
Currently I am using my white Ringke Slim as a baseline for comparison. It’s a great minimalist case. Fits snug and solid, and was exactly what I was looking for. I looked at eBay and saw a bunch of cases for $0.99. I figured, I’ve spent more money on dumber things, let’s take a shot and see how these compare.
I ended up buying 5 cases in 3 different styles. I limited myself to the top end only, the crème de la crème, the $0.99 category. Yes I know, big spender. Each of these cases also included free shipping. I don’t know how, but each one, all in, is literally just under a buck.
*EDIT: Some of you may be worried because you scratched the corners of your Nexus 5/heard people have scratched the corners of their Nexus 5 with hardcases (Ringke Slim, Spigen Ultra Fit, etc.) If you think you might have problems scratching your Nexus 5 taking a hardcase off, watch these video tutorials I've made. And stop worrying!
http://forum.xda-developers.com/showthread.php?t=2601790
Card Trick:
Properly bending the case over corners (1 at a time): Use the camera cutout with your index finger as the pivot point/fulcrum to make it easier to bend the case out and over the corner.
http://www.ebay.ca/itm/Hard-Plastic-Back-Cover-Case-Skin-For-NEW-LG-Google-Nexus-5-4-E960-Candy-Color-/251377476993?pt=US_Cell_Phone_Screen_Protectors&var=&hash=item3a8743e581
First up was the candy color hardcase, in dark blue. “You’re my boy Blue!” (UPDATE: Not Recommended. Case design is not consistent, see below)
The pictures just don’t do justice to how deep of a blue this is. It’s fantastic. Build quality wise, other than the spot where you can clearly see they took it off the mold, it’s not bad. The button cut outs are correct. The headphone and micro USB cut outs are also good. The camera cutout is acceptable and there is enough space to make sure nothing is blocked, but it isn’t quite centered.
It’s a smooth plastic so it may be slippery depending on your hands. If they’re moist, no problem, but if you have dry hands, have a decent grip. Like the back of the black Nexus 5, this finish is a bit of a fingerprint magnet.
There are no sharp edges, and the plastic is a little softer and more malleable than the Ringke Slim (it’s thinner plastic). While the case fits snugly with no risk of coming off, the softer material makes it easier to bend to put on/take off the phone. Though there is less corner coverage than the Ringke Slim. The lip over the front is also miniscule, so while you could place it face down and not have the screen touch the table, you probably wouldn’t want to take the chance.
Overall, this case has an amazing shade of blue. But other than that, it’s definitely just an average case, along the “get what you pay for line.” Okay deal for a buck but don’t expect much more. If you want a case with colors that are really intense and pop, this one will suit you well. I’ll use it on occasions when I feel like there’s just not enough color around.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Znamir81 ordered the same blue Candy color case as above and got something completely different. Maybe the seller sent him the wrong case, but either way, should probably skip the Candy Color cases. The power button cutout is different, it is larger and includes the simtray/eject. See this post for full details.
Some examples:
Click to expand...
Click to collapse
http://www.ebay.ca/itm/Case-Semi-Clear-Ultra-Slim-Skin-Shield-Cover-For-LG-Google-Nexus-5-D820-w-s-Film-/321261886455?pt=US_Cell_Phone_PDA_Cases&var=&hash=item4accb35bf7
Next up are a pair of semi-transparent frosted hardcases. I got these in blue and black. They each came with a screen protector (I don’t use screen protectors so can’t comment) which was a nice gesture for a buck. They also included little keychain nub touchscreen pens. You can tell they’re cheap and hollow, but when you’re in a pinch, or maybe if you don’t want to take off your mitts in the cold, they might come in handy. I tested them and they work quite well.
Both cases were made well, no complaints. No sharp edges, no remnants of the mold where it was detached either. The material is again smooth plastic, but with a neat absorbent coating or something. My hands were semi wet/warm and I was leaving fingerprints and smudge marks all over the place. But looking at the case, the fingerprints would just dry up and disappear. It was neat, don’t know how long it will last but it was nice how I didn’t have to wipe it, it just went away on its own. Definitely not fingerprint magnets.
The cases fit snugly, and the lip is enough that if you would like to put it face down you could. Corner coverage again is minimal, and less than the Ringke Slim, a little bit more than my boy Blue up there.
The colors, while I quite like them, don’t meld too well with the black Nexus 5. The nice bright blue, turned into a dirty teal color, and the black just looked smoke gray. I think these cases would look fantastic on the white Nexus 5 (especially during the summer months). I do like that you can see the Nexus branding through the case though.
You can also see dark spots around the edges, those are where the case has more pressure against the phone than on other areas. It’s more prominent on the black Nexus 5, but I’m sure it would be minimalized or not show at all with the white.
I quite like these cases, but due to the color of the phone, I’ll probably only use them at the gym for wear and tear. The black phone really dulls the colors, but otherwise I highly recommend them (for white Nexus 5 owners) as the build quality, finish, and finger print magic are quite good. The screen protector, and touchscreen nubs are a good bonus. Fantastic deal for $0.99.
Click to expand...
Click to collapse
Here are a few pics of the semi transparent on a white Nexus 5 from EddyOS. Those of you with a white Nexus 5 who are interested in the semi transparent cases, know that they will look much better on your phone.
Click to expand...
Click to collapse
http://www.ebay.ca/itm/HOT-QuickSand-Matte-Hard-Skin-Cover-Case-For-LG-Google-Nexus-5-D820-w-s-Film-/321261912603?pt=US_Cell_Phone_PDA_Cases&var=&hash=item4accb3c21b
Last is a pair of quicksand cases. There are some bigger brands that people have mentioned here that do this style, such as Bear Motion and Poetic. So let’s see how a generic version at a fraction of the price compares. These cases also came with screen protectors and touchscreen nub keychains as a bonus.
I ordered Black and Orange. At first I was going to order the Bear Motion case, but when they didn’t have black, the $0.99 club came calling.
Firstly the colors, the black is fantastic, just a slightly off black, gritty, scattered color. The “orange” on the other hand, yeah… Not quite the citrus fruit I was looking for. It’s more of a watermelon pink orange. I don’t have a problem with that; I love watermelons and their mushy, juicy, deliciousness. But for a phone, wrong fruit for me. I’ll probably give it away, or save it for a bright summer day.
Build quality is excellent! The material is durable and malleable. I love the texture of it. It’s grippy without being tacky/sticky, and it feels like something you just want to hold. I actually don’t miss the phone being naked when the quicksand is on it. I would love a phone manufacturer to make a phone with a quicksand style back!
Fit and finish are perfect. All of the cutouts line up correctly, everything is centered and it is snugly fit. There is a good amount of lip on the front to place it face down if you like and there is more corner coverage than either of the previous 2 styles. The coverage on the top corners is equivalent to the Ringke Slim, while the bottom is slightly less but still comparable.
Honestly, this is the best $0.99 I’ve ever spent, and it’s replacing my Ringke Slim as my primary case. I’ve ordered all of the remaining colors for random days when I’m in the mood for a ridiculous bright green or sky blue. Gray will be nice too.
Overall, this is the minimalist case deal of deals for me. $0.99 gets a fantastically built case, perfectly lined camera and button cutouts, screen protector (don’t know quality), and touchscreen nub.
Click to expand...
Click to collapse
The only down side to any of the cases I’ve listed, is of course the delivery time. A buck doesn’t get you next day air, it’s in the ballpark of 3 – 4 weeks. If that’s no problem, and you’re a fan of minimalism, consider skipping the big names, and join the $0.99 club!
Few more black quicksand case pics from today. Just because I still can't get over how this can only be $0.99!
Click to expand...
Click to collapse
Here are the rest of the colors for the Quicksand cases:
Gray:
Click to expand...
Click to collapse
Sky Blue:
Click to expand...
Click to collapse
Lime Green:
Click to expand...
Click to collapse
Feb 21, 2014 "B-Type" Quicksand Cases:
Mini Review:
NOTE: For these ones, just do an ebay search for “Nexus 5 Quicksand” and you will see them.
This is the seller I used. I suggest doing your own ebay search to see if there are sellers offering the cases with a lower price. At this current moment, the seller I used is at $2.05 and I saw some for around $1.98.
http://www.ebay.com/itm/Thin-Quicksand-Frosted-Hard-Case-Cover-Skin-For-Google-Nexus-LG-5-/171189921854?pt=US_Cell_Phone_PDA_Cases&var=&hash=item27dbb6e83e
Okay, here are the “B-Type” Quicksand cases. These ones differ from the ones I reviewed in the OP in a couple of ways. The camera cutout is slightly different. It has an upside down tear drop versus a light bulb style cutout. All of the remaining cutouts, power, volume rocker, headphone jack, and USB port are all accurate and centred. The camera and flash also line up nicely in the middle of the tear drop.
The more noticeable difference you will see between these ones and the original Quicksand cases (other than the camera cutout) are the Quicksand finish itself, and finer “neatness” details. This case is a little bit more “rough around the edges,” not in a sense of actually being “rough” to the touch, but more along the lines of not being completely neat and tidy. For example there are a couple spots on the bottom and top where there are a couple of extra bits from the moulding process remaining. They aren’t sharp or really all that noticeable unless you are actively looking/focusing on finding them, but they are there.
The other is the finish. This Quicksand finish is ever so slightly different. The finish is a little less “quicksandy” (yeah yeah not a real word) and a little more “plasticy”/rubbery with texture. It still has a quicksand finish, and you can tell it’s there, but it is not as prominent. It still feels nice in the hand, grips well, and won’t slide around. It’s seems like a quicksand “lite” I guess. One thing I did notice was that this finish seems incredibly durable, like it is meant to take a beating. To me it seems as if they took a quicksand case, and gave it one more protective coating dip or something. It lost a bit of the quicksand, but gained a bit of toughness. Not an entirely bad tradeoff. I have no problems with the durability of the normal Quicksand cases, but it can’t hurt to have a little extra shielding.
So, ultimately it’s not quite as clean and “finished” as the original Quicksand cases, but it’s still pretty good in my book. Also, since the original Quicksand cases are no longer $0.99, going up to $2.99+ now, these ones are still an okay buy at around $2.00 shipped. Also, you get more colour choices, so that’s a bonus. If you can find the original Quicksand cases in the colour of your choosing, I still recommend them first. But if you can’t find the colour you want, these ones aren’t a bad backup and are still pretty good cases. You’ll never beat the original $0.99 Quicksand cases, but I still like these too. And as you’ll see, the red is a nice deep red too!
Red “B-Type” Quicksand Case:
I really like the shade of red this case came in. I've been wanting a red case for a while, but the original Quicksands didn't come in it. Only that watermelon pink-orange colour... This shade is quite nice. It isn't overly bright (like an orange-red) or very dark (like a blood red), but a nice deep saturated red. They did well with this shade.
White "B-Type" Quicksand Case:
The white is white. By that I mean not "off white" or "eggshell" but white. It gives a good Stormtrooper look. I think with the slightly different coating this has, that I don't believe it will stain as easily. The lighter colours of the original Quicksand cases (like my lime green case) tended to pick up stains a little bit easily, but this slightly different coating seems like it will hold up a bit better against that (we'll see of course). So stick with the darker colours for the original Quicksand cases, but if you want to venture into lighter colours, these ones might be the better option.
Watermelon Pink-Orange Original Quicksand vs. Red "B-Type" Quicksand:
Here's a comparison between the original and B-Type Quicksand cases. You can see the different camera cutout as well as clear difference in colour. Whoever marketed that watermelon pink-orange case as "Red" should be smacked in the back of the head. Whoever said it would be good to call that case "Orange" as well, should also be smacked in the back of the head. It's clearly a Watermelon Pink-Orange....
But you can see what a real red actually looks like. The pictures don't show the finer details, but there are a couple imperfections on the top and bottom of the red case (and white) that I was mentioning earlier. You might be able to see them in the pictures of the white case + phone.
Wrap Up:
So I'm not disappointed with these cases. Sure, they're not as good as the original cases, but they're not far off. They also do gain a bit more of a durable finish, even if it does lose some of the Quicksand goodness. If the original Quicksand cases are the base line of 100%, I'd put these ones at 80% - 90%. Still pretty good, not perfect, but you won't be disappointed if you buy it. Also, with the additional colour choices, and lower price (now that the originals are no longer $0.99) I'd say they're still a good buy.
Click to expand...
Click to collapse
I'm deadly afraid of scratching my phone with slim cases. How is the material? Have you gotten any scratches from it?
FuMMoD said:
I'm deadly afraid of scratching my phone with slim cases. How is the material? Have you gotten any scratches from it?
Click to expand...
Click to collapse
Which one?
I haven't had any issues with scratches with any of them. My phone is still perfect. I also tend to baby my electronics though, and am very careful when putting on/taking them off. I also did swap around all of these cases a bunch of times as well as the Ringke Slim and still have no scratch issues.
In general all of these cases had more flex and were a softer hard plastic (bit of an oxymoron but you get the idea) in comparison to the Ringke Slim which is excessively rigid. I also didn't have any scratch problems with the Ringke Slim though, as some others have mentioned they did.
In any case, these cases are all easier to bend outward and are very smooth. There are no sharp edges on any of them. There's always a risk especially with how soft the side plastic is on the black Nexus 5, but I think if you're very careful you won't have a problem.
mmmmBACON said:
Which one?
I haven't had any issues with scratches with any of them. My phone is still perfect. I also tend to baby my electronics though, and am very careful when putting on/taking them off. I also did swap around all of these cases a bunch of times as well as the Ringke Slim and still have no scratch issues.
In general all of these cases had more flex and were a softer hard plastic (bit of an oxymoron but you get the idea) in comparison to the Ringke Slim which is excessively rigid. I also didn't have any scratch problems with the Ringke Slim though, as some others have mentioned they did.
In any case, these cases are all easier to bend outward and are very smooth. There are no sharp edges on any of them. There's always a risk especially with how soft the side plastic is on the black Nexus 5, but I think if you're very careful you won't have a problem.
Click to expand...
Click to collapse
That's great! The blue looks amazing, so i'll probably be ordering a few. They're all 1.68 though, how did you get them for .99?
FuMMoD said:
That's great! The blue looks amazing, so i'll probably be ordering a few. They're all 1.68 though, how did you get them for .99?
Click to expand...
Click to collapse
All of the links I provided were from the exact seller I used. They all still say $0.99 (USD)
I'm not sure how you're getting $1.68.
Those are links to the Canadian eBay.
*edit: sorry, I did see the $1.68...
I guess on the candy color cases they raised the prices. It was $0.99 when I ordered in November. It still says that price as well until you choose a case. Sorry.
The other ones are still $0.99.
mmmmBACON said:
All of the links I provided were from the exact seller I used. They all still say $0.99 (USD)
I'm not sure how you're getting $1.68.
Those are links to the Canadian eBay.
*edit: sorry, I did see the $1.68...
I guess on the candy color cases they raised the prices. It was $0.99 when I ordered in November. It still says that price as well until you choose a case. Sorry.
The other ones are still $0.99.
Click to expand...
Click to collapse
The cases are all great, thanks for the review and pictures. I ordered 4 of the quicksand ones and that dark royal blue hard case. :good::good::good:
FuMMoD said:
The cases are all great, thanks for the review and pictures. I ordered 4 of the quicksand ones and that dark royal blue hard case. :good::good::good:
Click to expand...
Click to collapse
No problem, glad I could help.
Let me know what you think when you eventually get them. I'm sure they ship them by sail boat on calm days.
I definitely agree on your 4 quicksand choices! I think it's just such a good deal.
I bought the blue case for exactly the same reason. The color is just intense. It does suck that they raised the price though. But $1.68 is still dirt cheap in comparison to most cases.
i was about to make a new thread and say i got a hard case for 3$ locally (toronto) and a bumper case that im in love with.
anyways the hard case like you mentioned was shockingly good, no sharp edges, no left over molds, its nice and smooth
and best part of all its not super hard plastic, you can bend it and its semi flexible sort of .
its the black version of the (solid) blue one you got.
the bumper is also shockingly good for 5$ and its the one im currently using
the only question i have is, doesnt the quicksand kind of feel rough on the phone ? since the inside of the case is also the same rough material ? logic tells me that putting it on and taking it will scratch the phone since the case kind of acts like sand paper ? sorry for my ignorance !!
I've got same one, Unfortunately it came with chipped of corner but function is still good also seller send me a replacement one so all is well :victory:
mmmmBACON said:
join the $0.99 club!
Click to expand...
Click to collapse
I hate you man... Last hour or two I've spent on ebay browsing $0.99 covers and clicking 'Buy it now' more often than not. You've got me addicted!
damn them not delivering to the UK, its a conspiracy i tell you!
Giroyac said:
i was about to make a new thread and say i got a hard case for 3$ locally (toronto) and a bumper case that im in love with.
anyways the hard case like you mentioned was shockingly good, no sharp edges, no left over molds, its nice and smooth
and best part of all its not super hard plastic, you can bend it and its semi flexible sort of .
its the black version of the (solid) blue one you got.
the bumper is also shockingly good for 5$ and its the one im currently using
the only question i have is, doesnt the quicksand kind of feel rough on the phone ? since the inside of the case is also the same rough material ? logic tells me that putting it on and taking it will scratch the phone since the case kind of acts like sand paper ? sorry for my ignorance !!
Click to expand...
Click to collapse
Nice, $3 is still pretty good, especially without the wait time. And $5 for a bumper is good too.
After seeing that these $0.99 cases that I figured would be just cheap pieces of garbage were comparable or better (the quicksand for me) than cases 10 - 20x their price; I don't think I'm going to bother with a bigger brand name anymore on any future phone.
The 3 - 4 week wait is worth it when I can buy a variety of different styles of cases and swap them around for the price of 1 Spigen or Ringke. I still think my Ringke Slim is a great case, but I've been spoiled by $0.99 haha.
As for the quicksand texture, don't think of it as a coarse scratching material. Think of it along the lines of 1000 grit smooth sandpaper, but not sand, instead a textured/coated plastic. It's difficult to describe really, but it's not a material that will scrape the phone up. It just adds a nice grip.
Znamir81 said:
I hate you man... Last hour or two I've spent on ebay browsing $0.99 covers and clicking 'Buy it now' more often than not. You've got me addicted!
Click to expand...
Click to collapse
Haha, at least it's a cheap addiction! You're not burning a hole in your wallet at $0.99. :good:
Great reviews. Think I'm going to have to pick up a few different quicksand case colors.
Sent from my Nexus 5 using Tapatalk
jonyid said:
damn them not delivering to the UK, its a conspiracy i tell you!
Click to expand...
Click to collapse
There are other sellers that sell the same stuff, you don't have to use the one I did.
http://www.ebay.co.uk/itm/UK-QuickSand-Matte-Hard-Skin-Cover-Case-for-LG-Google-Nexus-5-D820-Green-Film-/271331661823?pt=UK_MobilePhones_MobilePhonesCasesPouches&var=&hash=item3f2ca097ff
This seller has the blue and black quicksand and is located in the UK.
http://www.ebay.co.uk/itm/Hard-PC-Snap-On-Plastic-Back-Case-Cover-Shell-for-LG-Google-Nexus-5-/231088070573?pt=UK_MobilePhones_MobilePhonesCasesPouches&var=&hash=item35cdec1fad
This one has all of the candy colors and ships to the UK.
http://www.ebay.co.uk/itm/UK-Shield-Case-Semi-Clear-Ultra-Slim-Skin-Cover-for-LG-Google-Nexus-5-D820-/281217108571?pt=UK_MobilePhones_MobilePhonesCasesPouches&var=&hash=item4179d88a5b
These are the semi-transparent cases, ships to the UK.
If you do a http://www.ebay.co.uk search and just look up "Nexus 5 hard case" you should find the same cases that ship to you. They're all coming from the same factories anyway, I'm sure they wouldn't exclude the UK. It's probably just because the links I posted were for the Canadian site.
Thought I'd go for a white semi-transparent case, worth a go for 99p!
mmmmBACON said:
Haha, at least it's a cheap addiction! You're not burning a hole in your wallet at $0.99. :good:
Click to expand...
Click to collapse
Well, just ordered quicksand in all colors (ordered black one before) and I'm thinking if maybe I should have bought two or three pieces of each color. You know, just in case
Znamir81 said:
Well, just ordered quicksand in all colors (ordered black one before) and I'm thinking if maybe I should have bought two or three pieces of each color. You know, just in case
Click to expand...
Click to collapse
The quicksand cases are such a good buy. Once i get the order and if i really like it ill place another order so i can have replacements lol.
mmmmBACON said:
Okay, let’s get this out of the way first. These are minimalist cases! They’re meant for people who would prefer going bare back, because the best is nothing at all. Scuffs, scratches, and the last time you looked, things that just shouldn’t be there, no protection can be too risky. Even though that’s what you want.
A hardcase gives you the absolute minimum coverage, so it can be as close to nothing as possible.
They won’t protect well against drops with any substantial height, drunk stumbling Friday nights, Nexus Frisbee, or if your name happens to be Freddy Fumblefingers. Please buy something softer, thicker, rubberier, or with multiple layers, because sir or madam, these cases will not be able to keep up with you.
They will protect well against scrapes, dirty tables, fake bumping into people to say “hello”, or if your better half has long sharp nails and you need a protective shield.
Currently I am using my white Ringke Slim as a baseline for comparison. It’s a great minimalist case. Fits snug and solid, and was exactly what I was looking for. I looked at eBay and saw a bunch of cases for $0.99. I figured, I’ve spent more money on dumber things, let’s take a shot and see how these compare.
I ended up buying 5 cases in 3 different styles. I limited myself to the top end only, the crème de la crème, the $0.99 category. Yes I know, big spender. Each of these cases also included free shipping. I don’t know how, but each one, all in, is literally just under a buck.
The only down side to any of the cases I’ve listed, is of course the delivery time. A buck doesn’t get you next day air, it’s in the ballpark of 3 – 4 weeks. If that’s no problem, and you’re a fan of minimalism, consider skipping the big names, and join the $0.99 club!
Click to expand...
Click to collapse
Thanks for the review, I ended up buying black and blue quicksand cases.
Can anyone with the second and/or third case let us know how tight the cases are? I know some scratch up the corners of the phone during installation
Znamir81 said:
Well, just ordered quicksand in all colors (ordered black one before) and I'm thinking if maybe I should have bought two or three pieces of each color. You know, just in case
Click to expand...
Click to collapse
I don't think the quicksands I have will wear out anytime soon. But I'm probably going to buy extras anyway, they're just such great cases. Also, just in case they up the price! I don't think I could handle any blasphemy like $1.50 or something!! haha.
OregonLawyer said:
Thanks for the review, I ended up buying black and blue quicksand cases.
Click to expand...
Click to collapse
No problem, hope you enjoy them.
henry_gale said:
Can anyone with the second and/or third case let us know how tight the cases are? I know some scratch up the corners of the phone during installation
Click to expand...
Click to collapse
Well I reviewed the cases in the OP, so I guess I might have the 2nd and/or 3rd one! :good:
In terms of tightness, they're snug, and there's no risk of them falling off. They don't wiggle in the case or anything. They fit the same as the Ringke Slim. All of the cases I mentioned though (including the 2nd/3rd you were referring) are easier to put on and take off than the Ringke Slim I have that I was comparing them to.
This is because the type of polycarbonate these cases are using is not as rigid and stiff as the Ringke Slim (or Spigen Ultra Fit). They have a little bit more of a flex and give to them. When you are installing or removing the phone you can bend the sides out further, minimizing the rub against the corners of the phone. The Ringke Slim (and Spigen Ultra Fit) are very stiff cases, so some people were scraping the corners as they tried to pull the phone out because they didn't or couldn't bend the case out enough. The corners on the cases listed in the OP are also rounded and tapered more, and there are no sharp edges.
So rounded corners plus a little more flexible polycarbonate, and if you take care when putting it on (ie: don't just snap it in) and taking it off (ie: bend the corners out, not just pull on the side of the case), you should have no issues.
Do keep in mind though, I've never had the scraping problem with my Ringke Slim either. I followed the same procedure with these cases as I did with the Ringke, and have had no issue. It was in fact much easier.
This is going to be a long post, so I figured I would just make a new thread. I welcome anyone else to add their reviews, opinions, and pictures here as well (or if you disagree with me, let me know). The other thread was getting quite long anyway, so a new one full of reviews from people who have it would be nice.
So, does it live up to the hype? How sexy is that Nexus logo? I know some of you already have it, but here’s my take on it.
Maple Syrup:
White:http://www.puremobile.ca/lg-aaa75187802-hardshell-nexus-5-white
Black: http://www.puremobile.ca/lg-aaa75187801-hardshell-nexus-5-black
Football:
White: http://www.puremobile.com/lg-aaa75187802-hardshell-nexus-5-white
Black: http://www.puremobile.com/lg-aaa75187801-hardshell-nexus-5-black
Cup-o-Tea:
White: http://www.mobilefun.co.uk/lg-official-nexus-5-bumper-white-p42340.htm
Black: http://www.mobilefun.co.uk/lg-official-nexus-5-bumper-black-p42351.htm
Red: http://www.mobilefun.co.uk/lg-official-nexus-5-shell-case-red-p42344.htm
I was lucky enough to pick it up when it was $14.99, then got a 10% discount on top of it before they caught on and bumped the price/killed the discount. So all in, came to $14.16 CAD. Not bad for an OEM case. It’s currently listed as $17.99 in Canada/US, and £24.99 in UK. For Canada and US that’s still a pretty good price, but UK I think is getting the shaft here.
Now you probably already know I love my quicksand hardcases. To me nothing is going to beat those $0.99 lovelies. The look, feel, and texture of the quicksand cases can’t be beat in my eyes. But, sometimes a guy just wants that NEXUS logo showing proud. It’s an amazing phone, and deserves attention every now and then.
That’s where this case was supposed to come in. I have a lot of hardcases already (10+); the prospect of an OEM hardcase with NEXUS printed down the centre was too hard to pass up. It was enough to consider occasionally pulling me away from my quicksands. Pearly white, tri-side coverage, sleek and thin, stormtrooper/panda look, and the NEXUS logo down the middle. It could have been perfect. But alas, unicorns don’t exist and puremobile lied to me as well…
When I asked them, they confirmed to me the Nexus logo was there. I said I would cancel my order if it wasn’t, as that was the only reason I ordered it. They said yes… but it really wasn’t…
Anyway, enough of my wallowing in self-pity… Is this case still good despite the logo being absent? I know my main reason for ordering it is gone, but if it’s still a great case, those of you who don’t care about the logo might be in for a treat. So let’s get to reviewing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Construction:
The material is standard issue polycarbonate hard plastic. I have the white case, so can’t comment on black. It is a matte finish similar (if not the same) as my white Ringke Slim. It has a nice feel, albeit a bit slippery if you have dry hands. Also, when I say feel, I mean it’s almost nonexistent. This case adds next to no bulk. I would consider this more of a skin (a hard skin) than an actual case.
This case is thin. I mean super thin. When Ringke Slim and Spigen Ultra Fit say they’re thin, this case takes a gander at them and tells them they’ve been eating too much cake! That is good and bad. For me, I’m a minimalist, I want a case that’s there, but isn’t there. Scuff and scratch protection is all I want, and this case literally follows ONLY that, anyone expecting this to give you any protection beyond scratch only is dreaming. Take this into consideration, my quicksand cases seem like otterboxes in comparison to this.
With how thin this case is, you should realize that it will offer ZERO impact protection. I can’t emphasize that enough. Since there is next to no bulk, there is next to no case. It is very thin, so dropping your phone with this case on, is like dropping your phone naked (which is why I said the case is more like a hard skin). So for those of you who may drop your phones, don’t buy it. For minimalists, you may like it.
Honestly, this case reminds me of the 0.3mm TPU cases that were available on ebay. Only this is a better plastic and higher quality mold. If I didn’t know any better, I would seriously say those 0.3mm cases were the “beta test” design for this case. (If you saw my opinion on those 0.3mm cases, I hated them…) The different type of plastic used and the slightly more rigid feel, make it substantially better than the 0.3mm TPU cases.
You can see here, the striking similarities between the LG Hardshell and the 0.3mm TPU ebay cases:
Fit on the Phone:
This hardcase has tri-side coverage. Most hardcases as you know stick to covering the sides, the back, and some of the corners. And they snap into place with a lip that hooks over the sides/face of the phone. This also creates that “face down” gap that lifts the screen off when you place your phone screen down (don’t know why people would do that though…).
The LG hardshell gets rid of the lip and hook method of securing the case to the phone and adds top coverage in its place. This fundamentally changes how the case attaches to the phone. It is not hooked on and snapped in place. It follows the contours of the phone and hugs the sides tightly. Since the phone is wider in the back and narrower in the front (Dat Azz), the case follows those dimensions and holds itself in place just by shape alone. By hugging the sides instead of snapping in place, the LG hardcase does not create the face down gap. So, if you have this case, don’t put your phone screen down.
You can see the design difference and lack of lip the LG hardcase has vs. one of my quicksand cases.
The fact that this case does not snap on also means it will be less likely to scratch the corners of your phone. This case does not attach in the same way as a normal hardcase (it attaches by hugging the sides only) (remember Dat Azz). There is no lip to catch on the corners, so you can slide it on and off without worrying as much about scratches.
The downside of course, is the lack of the ability to place your phone face down. If you’re the type of person who likes to put your phone down like that, be aware. Again, this case is more of a skin than an actual case. For pure minimalists, this case is fantastic (I just want the damn NEXUS logo….)
Here you can see that face down, the case is actually lifted off of the table. That’s full on screen contact there.
The volume and power buttons I also find to be a bit odd to press. There is no problem pressing them, but the narrow cutouts make the feel a bit weird. It’s hard to explain, but I prefer the cutouts to be a little bigger, like standard hardcases where the cutout goes behind the back a bit.
Build Quality:
Okay, this is a bit tricky. In terms of design, button cutouts, and everything lining up perfectly, it does the job very well. The camera and flash cutouts are perfect, the volume and power button cutouts are centred nicely, and the headphone jack cutout lines up perfect as well. Don’t worry about not fitting fatter headphone jacks on with this case attached. The case is so thin that it doesn’t even matter. In terms of cutouts and fit, this case did very well.
Now the tricky part, since this case is so thin, the actual case itself is quite flimsy. There is only so much strength you can get out of a ridiculously thin piece of plastic (remember, think hard skin vs. case). It bends very easily, and honestly, I think if you bent it a little too much it would crack easily, make a crease in the plastic, or even tear. Add in cold weather, and I think it could crack with a gentle bump if the plastic got cold enough. If you were to compare this case vs. a quicksand in terms of strength, feel, and durability; the quicksand case easily takes it no question. If you were to compare this case vs. a Ringke Slim or Spigen Ultra fit, this case takes it in terms of fit/finish/detail, but both the Ringke Slim and Spigen Ultra Fit are more durable cases.
So in terms of build quality, this is a mixed bag.
Will I keep it?:
I was contemplating whether or not I would keep this case. If it impressed me enough despite not having the NEXUS logo on it, I would keep it. Honestly, after testing it out for a while, it’s going back. I like the minimalism and look, but the actual feel in hand for me was a turn off. It reminded me too much of the 0.3mm TPU cases, and this is what I thought of those when I posted it here. http://forum.xda-developers.com/showpost.php?p=49827734&postcount=44
The slipperiness, narrow power and volume cutouts, and it being a bit too flimsy for my liking really sealed the deal of the trip back. The surprising thing for me is, I would probably still send it back even if it did have the NEXUS logo on it. For some reason, I just don’t like the way it feels in the hand. It might be my love for the quicksand cases clouding my judgment, but it just doesn’t feel as nice in my hand. And that’s a big factor in a case for me. Looks are one thing, but feel is definitely important as well.
Surprisingly, this case, after the [email protected]#$ of information and wondering if it would ever come out, turned out to be a bit of a disappointment for me. Maybe I overhyped myself, or was just expecting too much, but I’m just not that impressed.
I think it all boils down to just feeling a bit too cheap and flimsy for my liking. For an OEM case, it just doesn’t hold up. I still think my $0.99 Quicksand cases have this beat hands down.
Feel free to add in your own reviews, as I’m sure there are a lot of people who will disagree with me
Pros:
- Perfectly centred cutouts
- Thinness (double edged sword here)
- Minimalism taken to the extreme
Cons:
- Narrow volume / power cutouts
- Flimsy/cheap feeling (due to the thinness... which is quite the conundrum)
- No face down lip (if you place your phone face down)
- No NEXUS logo
Awesomely done review! Thanks for taking the time to do this review even though you're not keeping the case. Very good read
Good review. I don't really see the point in such a thin case. Adds bulk, decreases the feel of the device, and adds zero protection.
Sent from my Nexus 5 using Tapatalk
_jordan_ said:
Good review. I don't really see the point in such a thin case. Adds bulk, decreases the feel of the device, and adds zero protection.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Thin cases such as these are meant for protection against scratches and small bumps. Personally, I don't like using a case any thicker than these thin hard shells
mine came in today, and even sans the nexus logo this is by far the best case for me. I don't drop my phone and want it for scratch protection only so I want as close to nothing as possible. this fits like a glove. even the spigen ultra fit was too big for me, but this is definitely thinner. the black feels similar to the black nexus, but is slightly more slick. it reminds me of the bear motion super slim, with just a bit more grip. I'm very disappointed there is no nexus logo, it's the only thing that is holding this back from being truly perfect, but I'll be keeping this and stop looking for other cases
I like how it makes the black Nexus look like the white version. I'll probably keep mine once I get it. How's the material with picking up stains or smudges? I hate how all whites cases I've owned get dirty after a week.
On a side note, do you happen to know which eBay listing has a Quicksand case in red, not watermelon color. Thanks.
Sent from my Nexus 5 using xda app-developers app
I was just about to write an in-depth review, but you beat me to it.
For me, this is the perfect case. The fit is precise and covers what can be covered, it's extremely thin (by far the slimmest case I've used), and it has the very same soft touch finish as a naked Nexus 5. However, if you're the adventurous sort, this case probably isn't for you; it has no lip (the case sits a hair lower than the front face), it's not made of sturdy plastic, and the jury is out on whether or not the white will stain over time. It's clearly not meant to protect your phone from a fall, but it will protect it from normal day-to-day use for most. But other than that, this is about as near naked as you could hope for if you're in the market for a minimal case.
Hopefully Bacon doesn't mind, but I've attached a few more macro shots for good measure...
Ngo93 said:
Awesomely done review! Thanks for taking the time to do this review even though you're not keeping the case. Very good read
Click to expand...
Click to collapse
Thanks, and no problem.
Atticustrd said:
I like how it makes the black Nexus look like the white version. I'll probably keep mine once I get it. How's the material with picking up stains or smudges? I hate how all whites cases I've owned get dirty after a week.
On a side note, do you happen to know which eBay listing has a Quicksand case in red, not watermelon color. Thanks.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Well I didn't use it terribly long (I am returning it, so it's wiped clean and repackaged haha) and I wanted to keep it in new shape. But from the time I used it smudges were not visible. It's a matte finish, so it won't show smudges clearly. As for stains, I couldn't tell you. It just came out so most people haven't even had it for more than a couple of days.
As for the quicksand cases, the original ones I bought don't have it in red (only watermelon/orange/pink, or whatever colour that is supposed to be). There is this one (I've ordered white and red, they haven't arrived yet) but it isn't the exact same design, and some other xda members who have it say it isn't as high of quality as the one's I've posted about before. I had to get it though because I just wanted white and red quicksand cases to go along with the rest I've got.
http://www.ebay.com/itm/Ultra-Thin-Quicksand-Matte-Frosted-Case-Cover-Hard-for-Google-Nexus-5-/380788789723?pt=US_Cell_Phone_PDA_Cases&var=&hash=item58a8c7d1db
Jason_MCG said:
I was just about to write an in-depth review, but you beat me to it.
For me, this is the perfect case. The fit is precise and covers what can be covered, it's extremely thin (by far the slimmest case I've used), and it has the very same soft touch finish as a naked Nexus 5. However, if you're the adventurous sort, this case probably isn't for you; it has no lip (the case sits a hair lower than the front face), it's not made of sturdy plastic, and the jury is out on whether or not the white will stain over time. It's clearly not meant to protect your phone from a fall, but it will protect it from normal day-to-day use for most. But other than that, this is about as near naked as you could hope for if you're in the market for a minimal case.
Hopefully Bacon doesn't mind, but I've attached a few more macro shots for good measure...
Click to expand...
Click to collapse
Sorry about that. I didn't see one up and I got a request to do a review when I received it. Also I welcome the pictures! The more the better. And other reviews as well (I did put an "s" in the thread title). I know my opinion isn't going to match everyone else.
I was seriously surprised that I didn't like this case. I'm a minimalist and I thought this would be exactly what I was looking for. But for some reason, just a bunch of little things compounded into my not liking it.
mmmmBACON said:
Sorry about that. I didn't see one up and I got a request to do a review when I received it. Also I welcome the pictures! The more the better. And other reviews as well (I did put an "s" in the thread title). I know my opinion isn't going to match everyone else.
I was seriously surprised that I didn't like this case. I'm a minimalist and I thought this would be exactly what I was looking for. But for some reason, just a bunch of little things compounded into my not liking it.
Click to expand...
Click to collapse
Don't apologize - it's a great review! I just didn't want you to think I was trying to hijack or anything.
I briefly entertained the thought of returning it because it is so thin and it's like you said: it's not going to really protect the phone. I'm not a clumsy person, but falls do happen...I just don't want my love of minimal to be an Achilles heel.
I was looking at those Quicksand case couple days ago, let me know how those two cases turn-out. White and red are the exact color I'm looking to get next. I Pre-ordered the Spigen ultra fit case in red.
Sent from my Nexus 5 using xda app-developers app
Poetic quicksand is really nice for about 4 bucks. Shipping is faster than the 2.99 generic quicksand. Both are extremely sleek and nicer than the lg case
Sent from my Nexus 5 using Tapatalk
Jason_MCG said:
Don't apologize - it's a great review! I just didn't want you to think I was trying to hijack or anything.
I briefly entertained the thought of returning it because it is so thin and it's like you said: it's not going to really protect the phone. I'm not a clumsy person, but falls do happen...I just don't want my love of minimal to be an Achilles heel.
Click to expand...
Click to collapse
No worries.
Yeah, that was one of the main things I was thinking about. I love minimalism, and I don't need drop protection as I baby all of my devices, but if a drop did ever happen, this isn't protecting anything. With the (white) case on I feel I would be more likely to drop it compared to the (black) phone naked. It's quite slippery unless your hands have some moisture to them.
Atticustrd said:
I was looking at those Quicksand case couple days ago, let me know how those two cases turn-out. White and red are the exact color I'm looking to get next. I Pre-ordered the Spigen ultra fit case in red.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Will do.
If you check out the mobilefun site (UK) there is the listing for Red as well as black and white - this has only appeared today.
No pictures as yet but im guessing this matches the red nexus 5 in colour.
How about scratches when you try to take off the case? Because the Ringke case had scratch all the corners of my phone
Tapatalked with my Nexus5(AKA The Hammerhead)
Great review. I have to say it's infinitely superior to the 99p 0.3mm case I received (which had sharp edges and was rough to the touch, nothing like this OEM case). It's very similar to the OEM HTC One hard shell in that it doesn't have a lip but I much prefer that. My phone is always face up so it's a non-issues for me.
Yes, it's expensive foe us UK early adopters but I'm sure it'll end up cheaper once it's on eBay a bit more but I don't care
EDIT: @mmmmBACON - does it work with a wireless charger? I'd imagine so but just checking
It should be noted that the black version has the same soft touch feel as the black nexus and is not slippery at all. Great minimalist case.
dsmpampis said:
How about scratches when you try to take off the case? Because the Ringke case had scratch all the corners of my phone
Tapatalked with my Nexus5(AKA The Hammerhead)
Click to expand...
Click to collapse
If you read the OP I talked about this case and any issues with scratched corners. I also have a Ringke Slim and have never had scratched corners. I made some videos on how to remove hardcases without scratching your phone.
Take a look here: http://forum.xda-developers.com/showthread.php?t=2601790
EddyOS said:
Great review. I have to say it's infinitely superior to the 99p 0.3mm case I received (which had sharp edges and was rough to the touch, nothing like this OEM case). It's very similar to the OEM HTC One hard shell in that it doesn't have a lip but I much prefer that. My phone is always face up so it's a non-issues for me.
Yes, it's expensive foe us UK early adopters but I'm sure it'll end up cheaper once it's on eBay a bit more but I don't care
EDIT: @mmmmBACON - does it work with a wireless charger? I'd imagine so but just checking
Click to expand...
Click to collapse
Thanks, it is definitely better quality than those 0.3mm TPU cases, but the feel in hand to me was too similar. Not the type of material and texture, but the shape, contours, and button layout. I think maybe if I had never bought those 0.3mm cases I might have liked this case more, but those were such crap, and this one was just similar enough in feel to remind me of them.
And there are no problems with wireless charging with this case on.
pemz82 said:
If you check out the mobilefun site (UK) there is the listing for Red as well as black and white - this has only appeared today.
No pictures as yet but im guessing this matches the red nexus 5 in colour.
Click to expand...
Click to collapse
Updated the OP with a link to the Red case as well.
mmmmBACON said:
If you read the OP I talked about this case and any issues with scratched corners. I also have a Ringke Slim and have never had scratched corners. I made some videos on how to remove hardcases without scratching your phone.
Take a look here: http://forum.xda-developers.com/showthread.php?t=2601790
.
And there are no problems with wireless charging with this case on.
Click to expand...
Click to collapse
The second time I took off the case, I tried your way from the video but I scratched the 2 left corners.....maybe I made something wrong.....
Sent from my iPad using Tapatalk
dsmpampis said:
The second time I took off the case, I tried your way from the video but I scratched the 2 left corners.....
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Did you try the card method (video #2), that works for EVERY hardcase I own and I still don't have any scratched corners. I don't know what to tell you otherwise.
Has anyone used these before on their P9? I've just ordered some as not been able to find a decent case I like.
They seem very reasonably priced compared to others.
Unfortunately I cannot post links yet.
Never heard of them, but would like to see pics. The dbrand skin I had came off on the top. The sticker layer above the camera is simply too thin.
I was going to get the dbrand one but I think they were about $20 for one. I shall post a couple of pics when they arrive, which hopefully won't be too long.
Hey Matt,
my phone has not arrived yet but I ordered from Xtremeskins too now because the skins are dirt cheap and look really promising. Also, when I watch this video: https://www.youtube.com/watch?v=9YrK0rkbFRc the leather skin looks really nice and georgous.
Once I get my phone and applied the skin I will post pictures here. Also am looking forward to see your pictures.
Best
Kon
I've used a black leather skin from dbrand for a while now and I reckon it's made of a similar fabric (3M vinyl).
The texture and touch is quite nice and come as close as can be to genuine leather. The cut and fit from dbrand is astonishing though I couldn't tell for xtremskins.
My skins arrived. I ordered orange and red carbon look. The first impression was nice. They look good and feel even nicer. Applying them was easy with help of their videos on their website.
The fit: I would give it 99%. Only on the sim tray and on the logo (see pictures) it is a little unaligned. Nothing that gets in the way of the beauty of this skin.
It feels very nice and adds a good grip to your phone. Suddenly, I dont feel like it is gonna fall off my hands any second...thats good.
However, the glue is not the best. On the sides it just doesnt seem like it is sticking properly. I have to constantly press it down and align it again. If the glue was a little better Id probably give it a 10/10 but if I knew dbrand had a better glue Id buy them there to be honest. I will update my review in a few days, however, I feel like this wont hold for long..sad though
Some more pictures
update: I have to revise my previous statement, dbrand doesn't even offer protection for the sides on the P9...maybe I now know why
oTToToTenTanz said:
Some more pictures
update: I have to revise my previous statement, dbrand doesn't even offer protection for the sides on the P9...maybe I now know why
Click to expand...
Click to collapse
Here's how mine ended up;
imgur . com/a/B21ls
cutouts were pretty accurate, no issues with the sides
using that tpu case to preserve the skin and phone even more
Nice, thanks for posting the link. Since you also use a case it is a little different to my use case I think Anyway, looks good
Hey Kon,
Apologies for only just replying to your post now but not had the chance due to ill health. The Orange carbon one looks good in the pictures although I wasn't keen on how it looked on the phone. I have a white glitter one on mine which actually looks decent. The material on it seems to be thicker than the Orange carbon one. I did have an issue with keeping the corners down but as I now have a bumper case on it doesn't matter too much. I decided to leave the Huawei lettering covered just to keep a clean look on the back. I'll get some pictures of it put on here tomorrow as soon as I charge up my other phone.
Matt
I'm thinking about getting a skin but I've never used one before. I'd like something that has decent grip. Which brand would you recommend?
Sent from my LG-H872 using Tapatalk
Hands down the Slickwrap - any of the three leather from the natural series. I have wasted money in dbrand and the other vinyl from SW as well.
I regret not buying the natural series. It's amazing, I have seen it on a friend's phone and got so jealous.
chanakyashah said:
Hands down the Slickwrap - any of the three leather from the natural series. I have wasted money in dbrand and the other vinyl from SW as well.
I regret not buying the natural series. It's amazing, I have seen it on a friend's phone and got so jealous.
Click to expand...
Click to collapse
Leather and Natural are 2 different series. Which one are you referring to?
Sent from my LG-H872 using Tapatalk
The last three inside the natural series.
---------- Post added at 07:55 PM ---------- Previous post was at 07:54 PM ----------
https://www.slickwraps.com/natural-series-wraps-skins-for-lg-g6.html
Thank you. Just impulse bought your suggestion. Memorial Day sale with 50% off MEM50
Dann.
Wish I can see this before ordering my dbrand. That does look slick!
I ended up returning the Wooden "Natural Series" Slickwraps skin I bought recently, and don't recommend anyone else order one of those. The trouble is that its edges are sharp, and stick up from the back. This may be exacerbated by the slight rounding on the back of the G6, but it made holding the phone with this skin on it really bothersome. I haven't got my money back from Slickwraps, and frankly don't expect to, I've read elsewhere that these companies basically never do that. I've also read that they Photoshop these edges down on the photos on their site.
All that said, I am still interested in the Alacantara Slickwraps skin, which is like suede, but my only hesitation there is that from some reason those don't have a little extra bit to go around the cameras. If anyone's tried a "Natural Series" leather skin, I'm also curious if that's more comfortable to hold, or if that has issues too.
Never tried Dbrand before but I did order the carbon fiber wrap from Slickwraps and love it. I currently only have the Back/Front and Camera Lens skinned. Here is a gallery of shots I put together of my titanium LG G6 with the carbon fiber skin from slickwraps. I would recommend them to anybody.
Carbon Fiber Skin From Slickwraps (Titanium LG G6)
patrickneil said:
.. The trouble is that its edges are sharp, and stick up from the back. This may be exacerbated by the slight rounding on the back of the G6, but it made holding the phone with this skin on it really bothersome...
Click to expand...
Click to collapse
Yep, patrickneil is spot on. It's almost awesome. But it is clearly a 1mm wood sticker. I've applied it perfectly yet the bottom has an arc between the phone and slickwrap, filling up with dust and hair.
I have filed down every other edge so that it feels better but it was a lot of effort. A little false advertising on slickwraps behalf.
Anyone here use either Dbrand or slickwraps front decals with a screen protector? is it possible?
Toast is the best when it comes to skins. Real wood, less than a millimeter thick. Toastmade.com
ledvedder said:
I'm thinking about getting a skin but I've never used one before. I'd like something that has decent grip. Which brand would you recommend?
Sent from my LG-H872 using Tapatalk
Click to expand...
Click to collapse
I have ordered the Nillkin Frost Shield and Nature series clear case(Gray).... Yet to receive them.. will share my findings soon...
I have used Nillkin in the past with my old Oneplus One and they have served me well...
I've had the dbrand skin in a Ringke Fusion case for a few months now and I don't know if there's much else for me to add. Dbrand's quality speaks for themselves at this point. i've started using their skin since my galaxy s7, then lg g5, lg g6 and now pixel 2 xl.
Installation:
Super easy since it is just the back. There are many videos on youtube that shows you how to do it. The whole process took me less than 5 minutes. Key is to use your hair dryer to soften the edges so it molds to the curvature of the phone and also smooth out the edges in the end to make it feel more seamless.
Quality:
This texture/pattern is very different than the matte ones (on their site it's called 'True Color') I'm used to. It doesn't have that mild gritty texture, instead you can feel the 'carbon fiber' pattern as you brush you hand across it. It definitely provides a bit more grip to the back of the phone. I'm not really into this neon green color and I may update this post with photos of their 'true color' green. The skin will definitely protect the phone from scratches, but because it has some thickness to it as well, I think it will protect the phone from potential minor dents. I do take my phone in and out of the case quite a bit for when I fly my drone so that the phone fits in the phone holder of the remote control, and there have been no signs of lifting (can't say the same for the precise fit cutouts; definitely not case friendly). I use the Ringke Fusion case for those who wonder.
Customer service:
I have to comment on this because I have dealt with this company before when I had the Samsung Galaxy s7 and it was exceptional. I foolishly pressed the wrong button and selected the option "without button cutouts" for the front skin. When I received the skin, I saw that there was no button cutout, I contacted dbrand about it. They reviewed the order and told me that I likely selected the wrong option before checking out, but they replaced it anyway without any hassle. I even offered to ship back the one sent out to me, and they said it's not necessary. I guess that's the kind of customer service you would expect when you pay $20 for some stickers...but then again it was my mistake! lol Shipping was blazing fast, but then I am from Toronto and I believe their warehouse is in Mississauga.
Overall:
Good quality, easy to install. however, it is pricey. after shipping and all, comes out to be around $31 CDN just for back coverage x 2 (free shipping if you buy over $20 USD) about $15 CDN a piece which is more than the case itself! however, for clumsy people like myself and with my luck, I will likely drop the phone at some point when it just so happens to be out of the case. Thus, this sort of adds as an extra layer of protection.
Thanks for the review will have a look.
couldn't resist anymore. ripped off the neon green carbon fiber and replaced with the true color green.