So prior to this I did unlock the bootloader and rooted it, and had TWRP installed. I flashed a stock rom (NASH_NPXS26.122-68-4_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip) and after the reboot this is the error I keep receiving and no I cannot reboot into recovery or anything but fastboot mode. Any suggestions why this happened and if I can do anything to restore the original OS? By the way, it won't even let me unlock the bootloader anymore..I am about to give up. Thanks in advance for any input on this matter!
Here's some info that I get in Command Prompt through adb/fastboot
C:\fastboot>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_tmo-641a15b-171208
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: NA_UMTS
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: MSM8998 2.1 (0)
(bootloader) serialno: ZY224BC8FR
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: 26D3CF6A
(bootloader) securestate: flashing_locked
(bootloader) verity-state: logging (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Fall-through from charger boot mode
(bootloader) imei: 356503080380945
(bootloader) meid:
(bootloader) date: 07-25-2017
(bootloader) sku: XT1789-04
(bootloader) carrier_sku:
(bootloader) battid: SNN5987A
(bootloader) battery-voltage: 4114
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/nash_tmo_c/nash:7.1.1/NPX
(bootloader) ro.build.fingerprint[1]: S26.122-68-4/8:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.26.226.8.nash_tmo_c.
(bootloader) ro.build.version.full[1]: tmo.en.US
(bootloader) ro.build.version.qcom: LA.UM.5.7.r1-09300-8x98.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.21-perf-gcdf0207 (huds
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9 2015012
(bootloader) kernel.version[2]: 3 (prerelease) (GCC) ) #1 SMP PREEMPT Th
(bootloader) kernel.version[3]: u Nov 2 09:10:45 CDT 2017
(bootloader) qe: "qe 0/0"
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: tmo
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.164s
GET OEM UNLOCK DATA
C:\fastboot>fastboot oem unlock data
...
(bootloader) ***************************************
(bootloader) WARNING: This command erases user data!
(bootloader) Please re-run this command to confirm.
(bootloader) ***************************************
OKAY [ 0.025s]
finished. total time: 0.026s
C:\fastboot>fastboot oem unlock data
...
(bootloader) warranty void fuse fail
OKAY [ 0.263s]
finished. total time: 0.264s
[
Why would you use a nougat flash all when you have the Oreo bootloader. You need to go into download move and blank flash now. It's your only hope and I don't know if you can with a locked bootloader
Good Night, I request the unlocking code of the bootloader to be able to recover my cell phone, I bought it recently and I arrived 5 days ago to Argentina, I bought it with the SIM Unlocked and it worked perfectly until an Android version was updated and when it was reboot the system does not start android, it stays on a screen where a legend appears and says: "Your device is corrupt. It can not be trusted and will not boot" and below a URL: "motorola.com/unlockbootloader" then download a firmware Verizon original to install from "fastboot" with flashall and it does not work because you can not install the boot.img, system and oem.img. and I can not enter the recovery mode or factory mode.
Fastboot: Platform Tools r27.0.1 (Android SKD Last Verision)
Firmware (ROM):
- Nash Verizon XT1789-01 v8.0.0_ODX27.109-34_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
- Nash Retail v8.0.0_OPX27.109-34_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
- fastboot_nash_verizon_oem_vzw_user_8.0.0_ODXS27.109-34-4_4_release-keys-cid2_vzw.tar
- nash_verizon_oem_vzw_user_8.0.0_ODXS27.109-34-4_4_release-keys-cid2_vzw
Executing ".\Windows\fastboot.exe -s ZY224GBN8V flash boot boot.img"
target reported max download size of 536870912 bytes
sending 'boot_a' (23353 KB)...
OKAY [ 0.501s]
writing 'boot_a'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.677s
All devices are flashed
- Output of ($ fastboot getvar all):
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_verizon-641a15b-180105
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: NA
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: MSM8998 2.1 (0)
(bootloader) serialno: ZY224GBN8V
(bootloader) cid: 0x0002
(bootloader) channelid: 0x83
(bootloader) uid: 9F4B8317
(bootloader) securestate: oem_locked
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 353310080085406
(bootloader) meid:
(bootloader) date: 02-26-2018
(bootloader) sku: XT1789-01
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) battery-voltage: 3895
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/nash_verizon/nash:8.0.0/O
(bootloader) ro.build.fingerprint[1]: DXS27.109-34-7/7:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.211.7.nash_verizo
(bootloader) ro.build.version.full[1]: n.verizon.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.4.r1-04300-8x98.0
(bootloader) version-baseband: M8998_20207.117.02.41R NNS
(bootloader) kernel.version[0]: Linux version 4.4.78-perf-g5b2c98f (huds
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 20150
(bootloader) kernel.version[2]: 123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Tue Mar 6 13:14:08 CST 2018
(bootloader) git:abl: MBM-3.0-nash_verizon-641a15b-180105
(bootloader) git:xbl: MBM-3.0-nash_verizon-9869834-180105
(bootloader) gitEmoticono sacando la lenguamic: MBM-3.0-nash_verizon-9869834-180105
(bootloader) git:rpm: MBM-3.0-nash_verizon-b13e14f-180105
(bootloader) git:tz: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:hyp: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:devcfg: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:cmnlib: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:cmnlib64: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:keymaster: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:storsec: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) gitEmoticono sacando la lenguarov: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) qe: "qe 0/0"
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: vzw
(bootloader) current-slot: _a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 2
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
all: listed above
finished. total time: 0.189s
- Output of ($ fastboot oem get_unlock_data):
(bootloader) Unlock data:
(bootloader) 3A35130008804560#5A593232344742
(bootloader) 4E3856004D6F746F205A200000#4212
(bootloader) B74E17B007DBC5F909223CA69E4C23F
(bootloader) 990D9#9F4B831700000000000000000
(bootloader) 0000000
OKAY [ 0.016s]
finished. total time: 0.016s
Verizon model cannot be unlocked or recovered. Call Motorola/Lenovo/Verizon. Tue bootloader is locked down and needs official methods. You most likely will not be able to unlock it depending on it's imei which would be cross referenced when trying to unlock. If you're unbootable, and don't have unlock bootloader checked in Android OS, good luck trying to unlock it.
Uzephi said:
Verizon model cannot be unlocked or recovered. Call Motorola/Lenovo/Verizon. Tue bootloader is locked down and needs official methods. You most likely will not be able to unlock it depending on it's imei which would be cross referenced when trying to unlock. If you're unbootable, and don't have unlock bootloader checked in Android OS, good luck trying to unlock it.
Click to expand...
Click to collapse
Is it possible to install a retail or verizon firmware without unlocking the bootloader and recovering my cell phone?
VFArts said:
Good Night, I request the unlocking code of the bootloader to be able to recover my cell phone, I bought it recently and I arrived 5 days ago to Argentina, I bought it with the SIM Unlocked and it worked perfectly until an Android version was updated and when it was reboot the system does not start android, it stays on a screen where a legend appears and says: "Your device is corrupt. It can not be trusted and will not boot" and below a URL: "motorola.com/unlockbootloader" then download a firmware Verizon original to install from "fastboot" with flashall and it does not work because you can not install the boot.img, system and oem.img. and I can not enter the recovery mode or factory mode.
Fastboot: Platform Tools r27.0.1 (Android SKD Last Verision)
Firmware (ROM):
- Nash Verizon XT1789-01 v8.0.0_ODX27.109-34_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
- Nash Retail v8.0.0_OPX27.109-34_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
- fastboot_nash_verizon_oem_vzw_user_8.0.0_ODXS27.109-34-4_4_release-keys-cid2_vzw.tar
- nash_verizon_oem_vzw_user_8.0.0_ODXS27.109-34-4_4_release-keys-cid2_vzw
Executing ".\Windows\fastboot.exe -s ZY224GBN8V flash boot boot.img"
target reported max download size of 536870912 bytes
sending 'boot_a' (23353 KB)...
OKAY [ 0.501s]
writing 'boot_a'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.677s
All devices are flashed
- Output of ($ fastboot getvar all):
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_verizon-641a15b-180105
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: NA
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: MSM8998 2.1 (0)
(bootloader) serialno: ZY224GBN8V
(bootloader) cid: 0x0002
(bootloader) channelid: 0x83
(bootloader) uid: 9F4B8317
(bootloader) securestate: oem_locked
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 353310080085406
(bootloader) meid:
(bootloader) date: 02-26-2018
(bootloader) sku: XT1789-01
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) battery-voltage: 3895
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/nash_verizon/nash:8.0.0/O
(bootloader) ro.build.fingerprint[1]: DXS27.109-34-7/7:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.211.7.nash_verizo
(bootloader) ro.build.version.full[1]: n.verizon.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.4.r1-04300-8x98.0
(bootloader) version-baseband: M8998_20207.117.02.41R NNS
(bootloader) kernel.version[0]: Linux version 4.4.78-perf-g5b2c98f (huds
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 20150
(bootloader) kernel.version[2]: 123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Tue Mar 6 13:14:08 CST 2018
(bootloader) git:abl: MBM-3.0-nash_verizon-641a15b-180105
(bootloader) git:xbl: MBM-3.0-nash_verizon-9869834-180105
(bootloader) gitEmoticono sacando la lenguamic: MBM-3.0-nash_verizon-9869834-180105
(bootloader) git:rpm: MBM-3.0-nash_verizon-b13e14f-180105
(bootloader) git:tz: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:hyp: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:devcfg: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:cmnlib: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:cmnlib64: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:keymaster: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:storsec: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) gitEmoticono sacando la lenguarov: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) qe: "qe 0/0"
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: vzw
(bootloader) current-slot: _a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 2
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
all: listed above
finished. total time: 0.189s
- Output of ($ fastboot oem get_unlock_data):
(bootloader) Unlock data:
(bootloader) 3A35130008804560#5A593232344742
(bootloader) 4E3856004D6F746F205A200000#4212
(bootloader) B74E17B007DBC5F909223CA69E4C23F
(bootloader) 990D9#9F4B831700000000000000000
(bootloader) 0000000
OKAY [ 0.016s]
finished. total time: 0.016s
Click to expand...
Click to collapse
Fixed!
how to fixed it?
VFArts said:
Fixed!
Click to expand...
Click to collapse
So you unlock your bootloader I have a xt1789-01 I need the bootloader unlock so I root my phone
Okay guys This stupid phone is doing my head in.
Bought the chinese version of Moto z2 Play. (XT1710-08)
Went to the TWRP website, downloaded the recover they said was compatible and it broke the phone. Twrp 3.2.3-0 addison.
Anyway. The phone wont boot into OS, and it wont boot into recovery.
Gets stuck on the MOTO screen when trying to boot into OS, and i get the Start Up Failed error when trying to go into recovery.
Can anybody link me to some tutorials or something or tell me how to fix this?
I wanted to put Oreo on this device.
Thanks in advance.
Nathan.
try this tut:
https://forum.xda-developers.com/z2-play/development/twrp-moto-z2-play-t3729531
I have the same problem
Mine also stuck in the Bootloader, every time boot normal, recovery, even charge to the wall outlet always go to the boot loader.
I already try many STOCK ROM to reflash using Fastboot Mode as the only tools that can run (The ADB Shell come up with no device)...
Always Failed to Flash Partition GPT.BIN
C:\mfastboot>mfastboot.exe flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (45 KB)...
OKAY [ 0.031s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Committing 'gpt.default.xml'
(bootloader) - flashing 'gpt_main0.bin' to 'partition:0'
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
(bootloader) Failed to write EFI backup GPT header.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 0.125s
GETVAR ALL DATA
C:\mfastboot>mfastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8953-C0.CD
(bootloader) product: albus
(bootloader) board: albus
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: 3
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB SKHYNIX HCG8a4 RV=08 PV=A2 FV=00000000000000A2
(bootloader) ram: 4GB SKHYNIX LP3 DIE=8Gb M5=06 M6=03 M7=00 M8=5F
(bootloader) cpu: MSM8953
(bootloader) serialno: ZY22XXXXXX
(bootloader) cid: 0x0032
(bootloader) channelid: 0xc7
(bootloader) uid: 8006F83500000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 534773760
(bootloader) reason: Volume down key pressed
(bootloader) imei: 35XXXXXXXXXXXXX
(bootloader) meid:
(bootloader) date: 07-13-2017
(bootloader) sku: XT1710-09
(bootloader) carrier_sku:
(bootloader) battid: SNN5985A
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint: <not found>
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full: <not found>
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g046197e (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Thu Aug 2 07:47:40 CDT 2018
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: git=bd19194
(bootloader) tz.git: git=5fefee4-dirty
(bootloader) devcfg.git: git=5fefee4-dirty
(bootloader) keymaster.git: git=5fefee4-dirty
(bootloader) cmnlib.git: git=5fefee4-dirty
(bootloader) cmnlib64.git: git=5fefee4-dirty
(bootloader) prov.git: git=5fefee4-dirty
(bootloader) aboot.git: git=MBM-NG-VC0.CD-0-g361b83a
(bootloader) frp-state: protected (144)
(bootloader) ro.carrier: retid
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.125s
Please somebody help with this problem...
Hi just on the off chance anyone see's this and can advise.
Family updated their G5 with OTA security update. OTA screwed the device (soft-brick can still access recovery and adb via pc), they reckon it's out of warranty so not worth taking in.
I'm following : https://forum.xda-developers.com/g5/development/official-stock-moto-g5-cedric-firmware-t3733897 to try to reinstate stock rom and revive the device. However, a little concerned that as the device is not user development mode enabled that i may hit hurdles (e.g. hard brick the bugger).
oem is marked as locked and i have a "fastboot flash mode (secure)" warning in bootloader. Is this going to mess with my plans?
Device is XT1675 (retail) which i understand is out of OTA so little confused as to why the initial error but am certain owner has not tampered in any way with the device. Before you ask, Motorola's solution was 'pay a repair guy'.
UPDATE:
Unsurprisingly, the instrs didn't work and i hit a hurdle. flashing boot resulted in an error "validation failed". Seems the error thinks that i'm trying to flash an old version... There doesn't appear to be a more recent G5 rom available so am i screwed?
deedb said:
Hi just on the off chance anyone see's this and can advise.
Family updated their G5 with OTA security update. OTA screwed the device (soft-brick can still access recovery and adb via pc), they reckon it's out of warranty so not worth taking in.
I'm following : https://forum.xda-developers.com/g5/development/official-stock-moto-g5-cedric-firmware-t3733897 to try to reinstate stock rom and revive the device. However, a little concerned that as the device is not user development mode enabled that i may hit hurdles (e.g. hard brick the bugger).
oem is marked as locked and i have a "fastboot flash mode (secure)" warning in bootloader. Is this going to mess with my plans?
Device is XT1675 (retail) which i understand is out of OTA so little confused as to why the initial error but am certain owner has not tampered in any way with the device. Before you ask, Motorola's solution was 'pay a repair guy'.
Click to expand...
Click to collapse
Run the "fastboot getvar all" command and paste the whole output into your reply (delete lines with a personal data such as IMEI and serial number first). According to it, I should be able to send you a link for a fastboot firmware that won't hardbrick your device (hardbrick occurs if older gpt and/or bootloader is flashed).
Btw, you can find the bootloader status (unlocked or not) in the bootloader menu. "Flashing unlocked" means it's unlocked, "oem_locked" means it isn't. However, it shouldn't matter as long as you flash the digitally signed stock firmware of the same or newer version (flashing an older one will immediately hardbrick your device, as I already wrote).
deedb said:
UPDATE:
Unsurprisingly, the instrs didn't work and i hit a hurdle. flashing boot resulted in an error "validation failed". Seems the error thinks that i'm trying to flash an old version... There doesn't appear to be a more recent G5 rom available so am i screwed?
Click to expand...
Click to collapse
Use lenovo Moto smart assistant app in pc and select recovery mode and it will flash the whole firmware.
Andrej_SK said:
Run the "fastboot getvar all" command and paste the whole output into your reply (delete lines with a personal data such as IMEI and serial number first). According to it, I should be able to send you a link for a fastboot firmware that won't hardbrick your device (hardbrick occurs if older gpt and/or bootloader is flashed).
Btw, you can find the bootloader status (unlocked or not) in the bootloader menu. "Flashing unlocked" means it's unlocked, "oem_locked" means it isn't. However, it shouldn't matter as long as you flash the digitally signed stock firmware of the same or newer version (flashing an older one will immediately hardbrick your device, as I already wrote).
Click to expand...
Click to collapse
Thanks for your reply and sorry for being so tardy with mine. bootloader is definitely locked "oem_locked".
getvar results as follows;
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8937-B8.31
(bootloader) product: cedric
(bootloader) board: cedric
(bootloader) secure: yes
(bootloader) hwrev: P5
(bootloader) radio: 7
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SKHYNIX HAG4a2 RV=08 PV=A5 FV=000000000
(bootloader) ram: 2GB SKHYNIX LP3 DIE=8Gb M5=06 M6=04 M7=00 M8=
(bootloader) cpu: MSM8937
(bootloader) cid: 0x0032
(bootloader) channelid: 0x41
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 535822336
(bootloader) reason: UTAG "bootmode" configured as fastboot
(bootloader) date: 07-09-2017
(bootloader) sku: XT1675
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Jan 6 22:37: 2 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/cedric/cedric:8.
(bootloader) ro.build.fingerprint[1]: 8.85-13-2/d04a4:user/rele
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.28.211.2.ce
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-08600-89xx.0
(bootloader) version-baseband: M8937_22.29.02.69R CEDRIC_EMEA_C
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g339
(bootloader) kernel.version[1]: [email protected]) (gcc version 4
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Tue Oct 9 13:5
(bootloader) kernel.version[3]: 2018
(bootloader) sbl1.git: git=MBM-NG-VB8.31-0-g77d3670
(bootloader) rpm.git: git=bd76357-dirty
(bootloader) tz.git: git=26cc248
(bootloader) devcfg.git: git=26cc248
(bootloader) keymaster.git: git=26cc248
(bootloader) cmnlib.git: git=26cc248
(bootloader) cmnlib64.git: git=26cc248
(bootloader) prov.git: git=26cc248
(bootloader) aboot.git: git=MBM-NG-VB8.31-0-g0b9dae9
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: retgb
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
deedb said:
Thanks for your reply and sorry for being so tardy with mine. bootloader is definitely locked "oem_locked".
getvar results as follows;
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8937-B8.31
(bootloader) product: cedric
(bootloader) board: cedric
(bootloader) secure: yes
(bootloader) hwrev: P5
(bootloader) radio: 7
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SKHYNIX HAG4a2 RV=08 PV=A5 FV=000000000
(bootloader) ram: 2GB SKHYNIX LP3 DIE=8Gb M5=06 M6=04 M7=00 M8=
(bootloader) cpu: MSM8937
(bootloader) cid: 0x0032
(bootloader) channelid: 0x41
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 535822336
(bootloader) reason: UTAG "bootmode" configured as fastboot
(bootloader) date: 07-09-2017
(bootloader) sku: XT1675
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Jan 6 22:37: 2 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/cedric/cedric:8.
(bootloader) ro.build.fingerprint[1]: 8.85-13-2/d04a4:user/rele
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.28.211.2.ce
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-08600-89xx.0
(bootloader) version-baseband: M8937_22.29.02.69R CEDRIC_EMEA_C
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g339
(bootloader) kernel.version[1]: [email protected]) (gcc version 4
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Tue Oct 9 13:5
(bootloader) kernel.version[3]: 2018
(bootloader) sbl1.git: git=MBM-NG-VB8.31-0-g77d3670
(bootloader) rpm.git: git=bd76357-dirty
(bootloader) tz.git: git=26cc248
(bootloader) devcfg.git: git=26cc248
(bootloader) keymaster.git: git=26cc248
(bootloader) cmnlib.git: git=26cc248
(bootloader) cmnlib64.git: git=26cc248
(bootloader) prov.git: git=26cc248
(bootloader) aboot.git: git=MBM-NG-VB8.31-0-g0b9dae9
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: retgb
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
Click to expand...
Click to collapse
Open this site https://mirrors.lolinet.com/firmware/moto/cedric/official/RETAIL/, download the firmware with "OPPS28.85-13-2" in the filename, extract the full content of the downloaded zip into the folder where's your adb/fastboot installed and flash it using the commands below. You can download the "OPPS28.85-13-4" firmware also, but "OPPS28.85-13-2" will be just enough to do not brick your phone (difference: 13-4 is firmware with december 2018 security patch while 13-2 is firmware with october 2018 security patch).
Commands to flash (data in the internal storage will be wiped):
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Hello, can someone help me find a firmware that will remove the brick in my xt1671? My Getvar all result is:
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8937-B8.31(*)
(bootloader) product: cedric
(bootloader) board: cedric
(bootloader) secure: yes
(bootloader) hwrev: P5
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG QX13MB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=1F
(bootloader) cpu: MSM8937
(bootloader) serialno: 2c35acf3
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: C0F87BA300000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
(bootloader) imei: 000000000000000
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: git=MBM-NG-VB8.31-0-g0b9dae9
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.063s
Thank you!
Maylo0292 said:
Hello, can someone help me find a firmware that will remove the brick in my xt1671? My Getvar all result is:
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8937-B8.31(*)
(bootloader) product: cedric
(bootloader) board: cedric
(bootloader) secure: yes
(bootloader) hwrev: P5
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG QX13MB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=1F
(bootloader) cpu: MSM8937
(bootloader) serialno: 2c35acf3
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: C0F87BA300000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
(bootloader) imei: 000000000000000
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: git=MBM-NG-VB8.31-0-g0b9dae9
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.063s
Thank you!
Click to expand...
Click to collapse
There are some important lines such as "(bootloader)ro.build.fingerprint[0]" and "(bootloader)ro.build.fingerprint[1]" missing. It seems that your device was previously hardbricked and now, it is booted (into the fastboot) using the sdcard only, isn't it?
Maylo0292 said:
Hello, can someone help me find a firmware that will remove the brick in my xt1671? My Getvar all result is:
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8937-B8.31(*)
(bootloader) product: cedric
(bootloader) board: cedric
(bootloader) secure: yes
(bootloader) hwrev: P5
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG QX13MB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=1F
(bootloader) cpu: MSM8937
(bootloader) serialno: 2c35acf3
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: C0F87BA300000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
(bootloader) imei: 000000000000000
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: git=MBM-NG-VB8.31-0-g0b9dae9
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.063s
Thank you!
Click to expand...
Click to collapse
Here you can get the firmware. https://mirrors.lolinet.com/firmware/moto/cedric/official/
And remove serial no from getvar.
Andrej_SK said:
There are some important lines such as "(bootloader)ro.build.fingerprint[0]" and "(bootloader)ro.build.fingerprint[1]" missing. It seems that your device was previously hardbricked and now, it is booted (into the fastboot) using the sdcard only, isn't it?
Click to expand...
Click to collapse
Thanks for answering. Just turn on fastboot even without the SD Card, when trying to flash any firmware gives errors because the bootloader locked. Any suggestions?
---------- Post added at 06:19 PM ---------- Previous post was at 06:10 PM ----------
Maylo0292 said:
Thanks for answering. Just turn on fastboot even without the SD Card, when trying to flash any firmware gives errors because the bootloader locked. Any suggestions?
Click to expand...
Click to collapse
It doesn't matter that your bootloader is locked - you're flashing official firmware images via fastboot - that's what they are designed for
You are more likely flashing incorrect firmware or firmware that is too old
Without the error output who knows
TheFixItMan said:
It doesn't matter that your bootloader is locked - you're flashing official firmware images via fastboot - that's what they are designed for
You are more likely flashing incorrect firmware or firmware that is too old
Without the error output who knows
Click to expand...
Click to collapse
I have tried to install the latest firmware version from the RETAIL and several companies and I always get the following result in fastboot:
C:\Users\Escritorio\Downloads\Firmware>fastboot flash partition gpt.bin
target reported max download size of 535822336 bytes
sending 'partition' (45 KB)...
OKAY [ 0.061s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote failure)
finished. total time: 0.172s
C:\Users\Escritorio\Downloads\Firmware>fastboot flash bootloader bootloader.img
target reported max download size of 535822336 bytes
sending 'bootloader' (5179 KB)...
OKAY [ 5.047s]
writing 'bootloader'...
(bootloader) Validating 'bootloader.default.xml'
(bootloader) Committing 'bootloader.default.xml'
(bootloader) - flashing 'emmc_appsboot.mbn' to 'aboot'
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition aboot
FAILED (remote failure)
finished. total time: 5.291s
C:\Users\Escritorio\Downloads\Firmware>fastboot flash logo logo.bin
target reported max download size of 535822336 bytes
sending 'logo' (2242 KB)...
OKAY [ 2.173s]
writing 'logo'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition logo
FAILED (remote failure)
finished. total time: 2.215s
C:\Users\Escritorio\Downloads\Firmware>fastboot flash boot boot.img
target reported max download size of 535822336 bytes
sending 'boot' (16384 KB)...
OKAY [ 16.292s]
writing 'boot'...
(bootloader) Image boot failed validation
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 16.495s
C:\Users\Escritorio\Downloads\Firmware>fastboot flash recovery recovery.img
target reported max download size of 535822336 bytes
sending 'recovery' (16484 KB)...
OKAY [ 15.957s]
writing 'recovery'...
(bootloader) Image recovery failed validation
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 16.179s
C:\Users\Escritorio\Downloads\Firmware>fastboot flash dsp adspso.bin
target reported max download size of 535822336 bytes
sending 'dsp' (16384 KB)...
OKAY [ 15.551s]
writing 'dsp'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition dsp
FAILED (remote failure)
finished. total time: 15.579s
C:\Users\Escritorio\Downloads\Firmware>fastboot flash oem oem.img
target reported max download size of 535822336 bytes
sending 'oem' (148900 KB)...
OKAY [141.870s]
writing 'oem'...
(bootloader) Image o failed validation
(bootloader) Invalid signed image
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 141.946s
Maylo0292 said:
I have tried to install the latest firmware version from the RETAIL and several companies and I always get the following result in fastboot:
C:\Users\Escritorio\Downloads\Firmware>fastboot flash partition gpt.bin
target reported max download size of 535822336 bytes
sending 'partition' (45 KB)...
OKAY [ 0.061s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote failure)
finished. total time: 0.172s
...
Click to expand...
Click to collapse
That's why does it fail. You are trying to flash older firmware.
Try to flash this one https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip (clicking the link will start the download. Source here https://mirrors.lolinet.com/firmware/moto/cedric/official/RETAIL/).
Maylo0292 said:
(bootloader) Security version downgrade
Click to expand...
Click to collapse
What the above post says - this error means the firmware you are trying to flash is too old
gpt and bootloader must be the same or newer than what is already on your device
Andrej_SK said:
That's why does it fail. You are trying to flash older firmware.
Try to flash this one https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip (clicking the link will start the download. Source here https://mirrors.lolinet.com/firmware/moto/cedric/official/RETAIL/).
Click to expand...
Click to collapse
Thank you very much for answering. It's just the firmware that I downloaded and installed and which gives me that error that I mentioned. Do you know where I can get the most current?
---------- Post added at 11:15 PM ---------- Previous post was at 11:09 PM ----------
TheFixItMan said:
What the above post says - this error means the firmware you are trying to flash is too old
gpt and bootloader must be the same or newer than what is already on your device
Click to expand...
Click to collapse
Thank you very much for answering.
It's strange for me to get that error, I downloaded and installed the firmware CEDRIC_RETAIL_8.1.0_OPPS28.85-16-6_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
Do you know which one I should install to fix it?
Maylo0292 said:
Thank you very much for answering.
It's strange for me to get that error, I downloaded and installed the firmware CEDRIC_RETAIL_8.1.0_OPPS28.85-16-6_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
Do you know which one I should install to fix it?
Click to expand...
Click to collapse
I don't own this device
I suggest you download the most recent for your region
Eg
Retin = India
Retgb = United Kingdom
Reteu = Europe
You get the idea
Obviously if you flashed an ota from a different region you may have to use firmware from that region as it maybe newer than yours which is why you should never flash otas outside of the about phone section of your phone unless they come direct from the manufacturer and not via a 3rd party website
Maylo0292 said:
Thank you very much for answering. It's just the firmware that I downloaded and installed and which gives me that error that I mentioned. Do you know where I can get the most current?
---------- Post added at 11:15 PM ---------- Previous post was at 11:09 PM ----------
Thank you very much for answering.
It's strange for me to get that error, I downloaded and installed the firmware CEDRIC_RETAIL_8.1.0_OPPS28.85-16-6_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
Do you know which one I should install to fix it?
Click to expand...
Click to collapse
That's weird, as you are always getting security downgrade error, but OPPS28.85-16-6 is the latest available official build for Moto G5 ever released by Lenovo (https://support.motorola.com/in/en/softwareupgrade). Are you sure that you are trying to flash the correct firmware?
Andrej_SK said:
That's weird, as you are always getting security downgrade error, but OPPS28.85-16-6 is the latest available official build for Moto G5 ever released by Lenovo (https://support.motorola.com/in/en/softwareupgrade). Are you sure that you are trying to flash the correct firmware?
Click to expand...
Click to collapse
I reinstalled the firmware PPS28.85-16-6 and it no longer gives the downgrade error but now the following comes out in the fastboot:
C:\Users\Escritorio\Downloads\CEDRIC_RETAIL_8.1.0_OPPS28.85-16-6_cid50_subsidy-D
EFAULT_regulatory-DEFAULT_CFC.xml>fastboot flash partition gpt.bin
target reported max download size of 535822336 bytes
sending 'partition' (45 KB)...
OKAY [ 0.003s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Committing 'gpt.default.xml'
(bootloader) - flashing 'gpt_main0.bin' to 'partition:0'
(bootloader) Flashing primary GPT image...
(bootloader) Failed to write primary GPT.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 0.065s
C:\Users\Escritorio\Downloads\CEDRIC_RETAIL_8.1.0_OPPS28.85-16-6_cid50_subsidy-D
EFAULT_regulatory-DEFAULT_CFC.xml>fastboot flash bootloader bootloader.img
target reported max download size of 535822336 bytes
sending 'bootloader' (5179 KB)...
OKAY [ 0.197s]
writing 'bootloader'...
(bootloader) Validating 'bootloader.default.xml'
(bootloader) Committing 'bootloader.default.xml'
(bootloader) - flashing 'emmc_appsboot.mbn' to 'aboot'
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition aboot
FAILED (remote failure)
finished. total time: 0.409s
C:\Users\Escritorio\Downloads\CEDRIC_RETAIL_8.1.0_OPPS28.85-16-6_cid50_subsidy-D
EFAULT_regulatory-DEFAULT_CFC.xml>fastboot flash boot boot.img
target reported max download size of 535822336 bytes
sending 'boot' (16384 KB)...
OKAY [ 0.628s]
writing 'boot'...
(bootloader) Image boot failed validation
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.800s
Do you know why this is?
---------- Post added at 06:55 PM ---------- Previous post was at 06:51 PM ----------
TheFixItMan said:
I don't own this device
I suggest you download the most recent for your region
Eg
Retin = India
Retgb = United Kingdom
Reteu = Europe
You get the idea
Obviously if you flashed an ota from a different region you may have to use firmware from that region as it maybe newer than yours which is why you should never flash otas outside of the about phone section of your phone unless they come direct from the manufacturer and not via a 3rd party website
Click to expand...
Click to collapse
Thank you. I went back to flashing the firmware PPS28.85-16-6 that you suggested to me and now it gives the following in fastboot:
C:\Users\Escritorio\Downloads\CEDRIC_RETAIL_8.1.0_OPPS28.85-16-6_cid50_subsidy-D
EFAULT_regulatory-DEFAULT_CFC.xml>fastboot flash partition gpt.bin
target reported max download size of 535822336 bytes
sending 'partition' (45 KB)...
OKAY [ 0.003s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Committing 'gpt.default.xml'
(bootloader) - flashing 'gpt_main0.bin' to 'partition:0'
(bootloader) Flashing primary GPT image...
(bootloader) Failed to write primary GPT.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 0.065s
C:\Users\Escritorio\Downloads\CEDRIC_RETAIL_8.1.0_OPPS28.85-16-6_cid50_subsidy-D
EFAULT_regulatory-DEFAULT_CFC.xml>fastboot flash bootloader bootloader.img
target reported max download size of 535822336 bytes
sending 'bootloader' (5179 KB)...
OKAY [ 0.197s]
writing 'bootloader'...
(bootloader) Validating 'bootloader.default.xml'
(bootloader) Committing 'bootloader.default.xml'
(bootloader) - flashing 'emmc_appsboot.mbn' to 'aboot'
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition aboot
FAILED (remote failure)
finished. total time: 0.409s
C:\Users\Escritorio\Downloads\CEDRIC_RETAIL_8.1.0_OPPS28.85-16-6_cid50_subsidy-D
EFAULT_regulatory-DEFAULT_CFC.xml>fastboot flash boot boot.img
target reported max download size of 535822336 bytes
sending 'boot' (16384 KB)...
OKAY [ 0.628s]
writing 'boot'...
(bootloader) Image boot failed validation
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.800s
Do you know why this is?
Did you start the flashing process with
fastboot oem fb_mode_set
Then
fastboot flash gpt
fastboot flash bootloader
And so on
If so then probably same issue
If you have an sd card with the mmcblk0 image on it then you can test your device is working correctly
Flash everything from the latest firmware except gpt & bootloader
Restart the phone back to bootloader with the sd card in
Use volume keys to select the start normally option
Your phone should boot
If you want to boot the phone without the SD card you need to find firmware which will allow gpt and bootloader to flash
TheFixItMan said:
Did you start the flashing process with
fastboot oem fb_mode_set
Then
fastboot flash gpt
fastboot flash bootloader
And so on
If so then probably same issue
If you have an sd card with the mmcblk0 image on it then you can test your device is working correctly
Flash everything from the latest firmware except gpt & bootloader
Restart the phone back to bootloader with the sd card in
Use volume keys to select the start normally option
Your phone should boot
If you want to boot the phone without the SD card you need to find firmware which will allow gpt and bootloader to flash
Click to expand...
Click to collapse
I started flashing with those commands but I get the same results, I think it's a serious problem in the EMMC so I'll take it to support. Thank you very much for the help.
Hello! I'm in a stupor, there's no way to revive my G7 play (XT1952-1)
P/n: PAE70020RU
The bootloader cannot be unlocked with commands, everything returns with errors. If I try to turn on phone, I see a lot of inscriptions on the screen, among them "failed to validate boot image"
If I try unlock bootloader I have
Spoiler: fastboot oem unlock
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem get_unlock_data
...
(bootloader) Unlock data:
(bootloader) read datablock error
(bootloader) Failed
OKAY [ 0.020s]
or
Spoiler: fastboot getvar all
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader[0]: MBM-2.1-channel_retail-4376d256f0a-2
(bootloader) version-bootloader[1]: 10129
(bootloader) product: channel
(bootloader) board: channel
(bootloader) secure: yes
(bootloader) hwrev: PVTB
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG QD63MB RV=08 PV=01 FV=0000000000000001
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: SDM632
(bootloader) serialno: 97a4c6b2
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: EDC9602200000000000000000000
(bootloader) securestate: oem_locked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 536870912
(bootloader) reason: Fall-through from normal boot mode
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: MBM-2.1-channel_retail-4376d256f0a-210129
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
(bootloader) current-slot: b
(bootloader) running-boot-lun: 0
(bootloader) running-slot: _b
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: Yes
(bootloader) slot-successful:_b: Yes
(bootloader) slot-bootable:_a: Yes
(bootloader) slot-bootable:_b: Yes
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 6
(bootloader) pcb-part-no:
all: listed above
finished. total time: 0.196s
What should I do?
RSA answer: This device is not supported
upd: If I try https://forum.xda-developers.com/t/hard-bricked-moto-g7-play.4096413/post-82634585, I recieve
< waiting for device >
That's all
Try with this tool (make EFS backup if you can because after installing Stock ROM from here, you will lose signal and you will have to flash EFS again)
Rescue and Smart Assistant Tool - Motorola
<h6><span style="color:#FFFFFF"><strong>Our Rescue and Smart Assistant tool</strong><br />can help diagnose and resolve issues on your<br />Motorola phone or Lenovo phone/tablet.</span></h6>
www.motorola.com
Note: even without opening the program, it does install Bootloader/Fastboot neccesary drivers, so you can download official TWRP for Moto G7 Play (Channel) and use the command fastboot boot (recovery name).img, then do an EFS backup on SD Card, or do it on internal storage then put it on your pc when on TWRP