Moto Z2 Force - XT1789-01 (Update Fail) - Moto Z2 Force Questions & Answers

Good Night, I request the unlocking code of the bootloader to be able to recover my cell phone, I bought it recently and I arrived 5 days ago to Argentina, I bought it with the SIM Unlocked and it worked perfectly until an Android version was updated and when it was reboot the system does not start android, it stays on a screen where a legend appears and says: "Your device is corrupt. It can not be trusted and will not boot" and below a URL: "motorola.com/unlockbootloader" then download a firmware Verizon original to install from "fastboot" with flashall and it does not work because you can not install the boot.img, system and oem.img. and I can not enter the recovery mode or factory mode.
Fastboot: Platform Tools r27.0.1 (Android SKD Last Verision)
Firmware (ROM):
- Nash Verizon XT1789-01 v8.0.0_ODX27.109-34_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
- Nash Retail v8.0.0_OPX27.109-34_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
- fastboot_nash_verizon_oem_vzw_user_8.0.0_ODXS27.109-34-4_4_release-keys-cid2_vzw.tar
- nash_verizon_oem_vzw_user_8.0.0_ODXS27.109-34-4_4_release-keys-cid2_vzw
Executing ".\Windows\fastboot.exe -s ZY224GBN8V flash boot boot.img"
target reported max download size of 536870912 bytes
sending 'boot_a' (23353 KB)...
OKAY [ 0.501s]
writing 'boot_a'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.677s
All devices are flashed
- Output of ($ fastboot getvar all):
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_verizon-641a15b-180105
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: NA
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: MSM8998 2.1 (0)
(bootloader) serialno: ZY224GBN8V
(bootloader) cid: 0x0002
(bootloader) channelid: 0x83
(bootloader) uid: 9F4B8317
(bootloader) securestate: oem_locked
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 353310080085406
(bootloader) meid:
(bootloader) date: 02-26-2018
(bootloader) sku: XT1789-01
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) battery-voltage: 3895
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/nash_verizon/nash:8.0.0/O
(bootloader) ro.build.fingerprint[1]: DXS27.109-34-7/7:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.211.7.nash_verizo
(bootloader) ro.build.version.full[1]: n.verizon.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.4.r1-04300-8x98.0
(bootloader) version-baseband: M8998_20207.117.02.41R NNS
(bootloader) kernel.version[0]: Linux version 4.4.78-perf-g5b2c98f (huds
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 20150
(bootloader) kernel.version[2]: 123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Tue Mar 6 13:14:08 CST 2018
(bootloader) git:abl: MBM-3.0-nash_verizon-641a15b-180105
(bootloader) git:xbl: MBM-3.0-nash_verizon-9869834-180105
(bootloader) gitEmoticono sacando la lenguamic: MBM-3.0-nash_verizon-9869834-180105
(bootloader) git:rpm: MBM-3.0-nash_verizon-b13e14f-180105
(bootloader) git:tz: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:hyp: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:devcfg: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:cmnlib: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:cmnlib64: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:keymaster: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:storsec: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) gitEmoticono sacando la lenguarov: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) qe: "qe 0/0"
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: vzw
(bootloader) current-slot: _a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 2
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
all: listed above
finished. total time: 0.189s
- Output of ($ fastboot oem get_unlock_data):
(bootloader) Unlock data:
(bootloader) 3A35130008804560#5A593232344742
(bootloader) 4E3856004D6F746F205A200000#4212
(bootloader) B74E17B007DBC5F909223CA69E4C23F
(bootloader) 990D9#9F4B831700000000000000000
(bootloader) 0000000
OKAY [ 0.016s]
finished. total time: 0.016s

Verizon model cannot be unlocked or recovered. Call Motorola/Lenovo/Verizon. Tue bootloader is locked down and needs official methods. You most likely will not be able to unlock it depending on it's imei which would be cross referenced when trying to unlock. If you're unbootable, and don't have unlock bootloader checked in Android OS, good luck trying to unlock it.

Uzephi said:
Verizon model cannot be unlocked or recovered. Call Motorola/Lenovo/Verizon. Tue bootloader is locked down and needs official methods. You most likely will not be able to unlock it depending on it's imei which would be cross referenced when trying to unlock. If you're unbootable, and don't have unlock bootloader checked in Android OS, good luck trying to unlock it.
Click to expand...
Click to collapse
Is it possible to install a retail or verizon firmware without unlocking the bootloader and recovering my cell phone?

VFArts said:
Good Night, I request the unlocking code of the bootloader to be able to recover my cell phone, I bought it recently and I arrived 5 days ago to Argentina, I bought it with the SIM Unlocked and it worked perfectly until an Android version was updated and when it was reboot the system does not start android, it stays on a screen where a legend appears and says: "Your device is corrupt. It can not be trusted and will not boot" and below a URL: "motorola.com/unlockbootloader" then download a firmware Verizon original to install from "fastboot" with flashall and it does not work because you can not install the boot.img, system and oem.img. and I can not enter the recovery mode or factory mode.
Fastboot: Platform Tools r27.0.1 (Android SKD Last Verision)
Firmware (ROM):
- Nash Verizon XT1789-01 v8.0.0_ODX27.109-34_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
- Nash Retail v8.0.0_OPX27.109-34_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
- fastboot_nash_verizon_oem_vzw_user_8.0.0_ODXS27.109-34-4_4_release-keys-cid2_vzw.tar
- nash_verizon_oem_vzw_user_8.0.0_ODXS27.109-34-4_4_release-keys-cid2_vzw
Executing ".\Windows\fastboot.exe -s ZY224GBN8V flash boot boot.img"
target reported max download size of 536870912 bytes
sending 'boot_a' (23353 KB)...
OKAY [ 0.501s]
writing 'boot_a'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.677s
All devices are flashed
- Output of ($ fastboot getvar all):
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_verizon-641a15b-180105
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: NA
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: MSM8998 2.1 (0)
(bootloader) serialno: ZY224GBN8V
(bootloader) cid: 0x0002
(bootloader) channelid: 0x83
(bootloader) uid: 9F4B8317
(bootloader) securestate: oem_locked
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 353310080085406
(bootloader) meid:
(bootloader) date: 02-26-2018
(bootloader) sku: XT1789-01
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) battery-voltage: 3895
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/nash_verizon/nash:8.0.0/O
(bootloader) ro.build.fingerprint[1]: DXS27.109-34-7/7:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.211.7.nash_verizo
(bootloader) ro.build.version.full[1]: n.verizon.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.4.r1-04300-8x98.0
(bootloader) version-baseband: M8998_20207.117.02.41R NNS
(bootloader) kernel.version[0]: Linux version 4.4.78-perf-g5b2c98f (huds
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 20150
(bootloader) kernel.version[2]: 123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Tue Mar 6 13:14:08 CST 2018
(bootloader) git:abl: MBM-3.0-nash_verizon-641a15b-180105
(bootloader) git:xbl: MBM-3.0-nash_verizon-9869834-180105
(bootloader) gitEmoticono sacando la lenguamic: MBM-3.0-nash_verizon-9869834-180105
(bootloader) git:rpm: MBM-3.0-nash_verizon-b13e14f-180105
(bootloader) git:tz: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:hyp: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:devcfg: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:cmnlib: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:cmnlib64: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:keymaster: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) git:storsec: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) gitEmoticono sacando la lenguarov: MBM-3.0-nash_verizon-7d478e6-180105
(bootloader) qe: "qe 0/0"
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: vzw
(bootloader) current-slot: _a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 2
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
all: listed above
finished. total time: 0.189s
- Output of ($ fastboot oem get_unlock_data):
(bootloader) Unlock data:
(bootloader) 3A35130008804560#5A593232344742
(bootloader) 4E3856004D6F746F205A200000#4212
(bootloader) B74E17B007DBC5F909223CA69E4C23F
(bootloader) 990D9#9F4B831700000000000000000
(bootloader) 0000000
OKAY [ 0.016s]
finished. total time: 0.016s
Click to expand...
Click to collapse
Fixed!

how to fixed it?

VFArts said:
Fixed!
Click to expand...
Click to collapse
So you unlock your bootloader I have a xt1789-01 I need the bootloader unlock so I root my phone

Related

Help!!! T mobile moto z2 force - boot/bootloader problems

So prior to this I did unlock the bootloader and rooted it, and had TWRP installed. I flashed a stock rom (NASH_NPXS26.122-68-4_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip) and after the reboot this is the error I keep receiving and no I cannot reboot into recovery or anything but fastboot mode. Any suggestions why this happened and if I can do anything to restore the original OS? By the way, it won't even let me unlock the bootloader anymore..I am about to give up. Thanks in advance for any input on this matter!
Here's some info that I get in Command Prompt through adb/fastboot
C:\fastboot>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_tmo-641a15b-171208
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: NA_UMTS
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: MSM8998 2.1 (0)
(bootloader) serialno: ZY224BC8FR
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: 26D3CF6A
(bootloader) securestate: flashing_locked
(bootloader) verity-state: logging (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Fall-through from charger boot mode
(bootloader) imei: 356503080380945
(bootloader) meid:
(bootloader) date: 07-25-2017
(bootloader) sku: XT1789-04
(bootloader) carrier_sku:
(bootloader) battid: SNN5987A
(bootloader) battery-voltage: 4114
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/nash_tmo_c/nash:7.1.1/NPX
(bootloader) ro.build.fingerprint[1]: S26.122-68-4/8:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.26.226.8.nash_tmo_c.
(bootloader) ro.build.version.full[1]: tmo.en.US
(bootloader) ro.build.version.qcom: LA.UM.5.7.r1-09300-8x98.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.21-perf-gcdf0207 (huds
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9 2015012
(bootloader) kernel.version[2]: 3 (prerelease) (GCC) ) #1 SMP PREEMPT Th
(bootloader) kernel.version[3]: u Nov 2 09:10:45 CDT 2017
(bootloader) qe: "qe 0/0"
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: tmo
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.164s
GET OEM UNLOCK DATA
C:\fastboot>fastboot oem unlock data
...
(bootloader) ***************************************
(bootloader) WARNING: This command erases user data!
(bootloader) Please re-run this command to confirm.
(bootloader) ***************************************
OKAY [ 0.025s]
finished. total time: 0.026s
C:\fastboot>fastboot oem unlock data
...
(bootloader) warranty void fuse fail
OKAY [ 0.263s]
finished. total time: 0.264s
[
Why would you use a nougat flash all when you have the Oreo bootloader. You need to go into download move and blank flash now. It's your only hope and I don't know if you can with a locked bootloader

Moto z2 play stuck in bootloader with no recovery.

Okay guys This stupid phone is doing my head in.
Bought the chinese version of Moto z2 Play. (XT1710-08)
Went to the TWRP website, downloaded the recover they said was compatible and it broke the phone. Twrp 3.2.3-0 addison.
Anyway. The phone wont boot into OS, and it wont boot into recovery.
Gets stuck on the MOTO screen when trying to boot into OS, and i get the Start Up Failed error when trying to go into recovery.
Can anybody link me to some tutorials or something or tell me how to fix this?
I wanted to put Oreo on this device.
Thanks in advance.
Nathan.
try this tut:
https://forum.xda-developers.com/z2-play/development/twrp-moto-z2-play-t3729531
I have the same problem
Mine also stuck in the Bootloader, every time boot normal, recovery, even charge to the wall outlet always go to the boot loader.
I already try many STOCK ROM to reflash using Fastboot Mode as the only tools that can run (The ADB Shell come up with no device)...
Always Failed to Flash Partition GPT.BIN
C:\mfastboot>mfastboot.exe flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (45 KB)...
OKAY [ 0.031s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Committing 'gpt.default.xml'
(bootloader) - flashing 'gpt_main0.bin' to 'partition:0'
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
(bootloader) Failed to write EFI backup GPT header.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 0.125s
GETVAR ALL DATA
C:\mfastboot>mfastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8953-C0.CD
(bootloader) product: albus
(bootloader) board: albus
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: 3
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB SKHYNIX HCG8a4 RV=08 PV=A2 FV=00000000000000A2
(bootloader) ram: 4GB SKHYNIX LP3 DIE=8Gb M5=06 M6=03 M7=00 M8=5F
(bootloader) cpu: MSM8953
(bootloader) serialno: ZY22XXXXXX
(bootloader) cid: 0x0032
(bootloader) channelid: 0xc7
(bootloader) uid: 8006F83500000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 534773760
(bootloader) reason: Volume down key pressed
(bootloader) imei: 35XXXXXXXXXXXXX
(bootloader) meid:
(bootloader) date: 07-13-2017
(bootloader) sku: XT1710-09
(bootloader) carrier_sku:
(bootloader) battid: SNN5985A
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint: <not found>
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full: <not found>
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g046197e (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Thu Aug 2 07:47:40 CDT 2018
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: git=bd19194
(bootloader) tz.git: git=5fefee4-dirty
(bootloader) devcfg.git: git=5fefee4-dirty
(bootloader) keymaster.git: git=5fefee4-dirty
(bootloader) cmnlib.git: git=5fefee4-dirty
(bootloader) cmnlib64.git: git=5fefee4-dirty
(bootloader) prov.git: git=5fefee4-dirty
(bootloader) aboot.git: git=MBM-NG-VC0.CD-0-g361b83a
(bootloader) frp-state: protected (144)
(bootloader) ro.carrier: retid
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.125s
Please somebody help with this problem...

XT 1789-04 Can't Get Passed Bootloader

Hey all,
Okay. I have (apparently) the 1789-04 version of the Z2 Force. However, the phone insists, for the most part, internally, that it is an AT&T phone, not the TMO variant, which would be the variant indicated by the model number. This has lately become an issue due to the fact that the other day I was in camera mode on the phone, and POOF it bricked all over me, and I've tried to flash all kinds of stock firmware onto the phone. ATT firmwares flash successfully across the board, but just end up doing a bootloader boot loop, sometimes asking me to factory data reset the phone. TMO stock firmware fails at the point where the boot image flashes with the error "Preflash validation error". I've tried all kinds of firwmares, the most recent, slightly older ones.
The device shows in the bootloader as OEM locked, but when I flash the TMO bootloader, it starts off with the bootloader unlocked warning. Total bonkers. When the ATT is flashed, it never boots, so no point. I only get as far as the Motorola screen. I cannot get the phone to go to blankflash, as the command fastboot oem blankflash (no quotes) produces an error that says something along the the lines of that not being authorized. I would LOVE for my phone to be forced into a spot where I could use blankflash and go from there. Anyway, here's the getvar, if you guys have any suggestions, that would be great.
C:\Users\zacha>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_tmo-641a15b-180130
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: NA_UMTS
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: MSM8998 2.1 (0)
(bootloader) serialno: ZY2249JTJC
(bootloader) cid: 0x0001
(bootloader) channelid: 0x84
(bootloader) uid: 3D66704C
(bootloader) securestate: oem_locked
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 536870912
(bootloader) reason: Fall-through from normal boot mode
(bootloader) imei: 353311080795291
(bootloader) meid:
(bootloader) date: 07-28-2017
(bootloader) sku: XT1789-04
(bootloader) carrier_sku:
(bootloader) battid: SNN5987A
(bootloader) battery-voltage: 3695
(bootloader) iccid: 89014103270252934039
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint: <not found>
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full: <not found>
(bootloader) ro.build.version.qcom: LA.UM.6.4.r1-04300-8x98.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.78-perf-g0f8e904 (huds
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Tue May 28 02:06:00 CDT 2019
(bootloader) git:abl: MBM-3.0-nash_tmo-641a15b-180130
(bootloader) git:xbl: git:xbl
(bootloader) gitmic: gitmic
(bootloader) git:rpm: git:rpm
(bootloader) git:tz: git:tz
(bootloader) git:hyp: git:hyp
(bootloader) git:devcfg: git:devcfg
(bootloader) git:cmnlib: git:cmnlib
(bootloader) git:cmnlib64: git:cmnlib64
(bootloader) git:keymaster: git:keymaster
(bootloader) git:storsec: git:storsec
(bootloader) gitrov: gitrov
(bootloader) qe: "qe 0/0"
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: att
(bootloader) current-slot:
(bootloader) running-bl-slot: _b/_b
(bootloader) running-boot-lun: 3
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: yes
(bootloader) slot-unbootable:_b: yes
(bootloader) slot-retry-count:_a: 0
(bootloader) slot-retry-count:_b: 0
all: listed above
finished. total time: 0.206s
zjcook23 said:
Hey all,
Okay. I have (apparently) the 1789-04 version of the Z2 Force. However, the phone insists, for the most part, internally, that it is an AT&T phone, not the TMO variant, which would be the variant indicated by the model number. This has lately become an issue due to the fact that the other day I was in camera mode on the phone, and POOF it bricked all over me, and I've tried to flash all kinds of stock firmware onto the phone. ATT firmwares flash successfully across the board, but just end up doing a bootloader boot loop, sometimes asking me to factory data reset the phone. TMO stock firmware fails at the point where the boot image flashes with the error "Preflash validation error". I've tried all kinds of firwmares, the most recent, slightly older ones.
The device shows in the bootloader as OEM locked, but when I flash the TMO bootloader, it starts off with the bootloader unlocked warning. Total bonkers. When the ATT is flashed, it never boots, so no point. I only get as far as the Motorola screen. I cannot get the phone to go to blankflash, as the command fastboot oem blankflash (no quotes) produces an error that says something along the the lines of that not being authorized. I would LOVE for my phone to be forced into a spot where I could use blankflash and go from there. Anyway, here's the getvar, if you guys have any suggestions, that would be great.
C:\Users\zacha>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_tmo-641a15b-180130
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: NA_UMTS
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: MSM8998 2.1 (0)
(bootloader) serialno: ZY2249JTJC
(bootloader) cid: 0x0001
(bootloader) channelid: 0x84
(bootloader) uid: 3D66704C
(bootloader) securestate: oem_locked
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 536870912
(bootloader) reason: Fall-through from normal boot mode
(bootloader) imei: 353311080795291
(bootloader) meid:
(bootloader) date: 07-28-2017
(bootloader) sku: XT1789-04
(bootloader) carrier_sku:
(bootloader) battid: SNN5987A
(bootloader) battery-voltage: 3695
(bootloader) iccid: 89014103270252934039
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint: <not found>
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full: <not found>
(bootloader) ro.build.version.qcom: LA.UM.6.4.r1-04300-8x98.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.78-perf-g0f8e904 (huds
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Tue May 28 02:06:00 CDT 2019
(bootloader) git:abl: MBM-3.0-nash_tmo-641a15b-180130
(bootloader) git:xbl: git:xbl
(bootloader) gitmic: gitmic
(bootloader) git:rpm: git:rpm
(bootloader) git:tz: git:tz
(bootloader) git:hyp: git:hyp
(bootloader) git:devcfg: git:devcfg
(bootloader) git:cmnlib: git:cmnlib
(bootloader) git:cmnlib64: git:cmnlib64
(bootloader) git:keymaster: git:keymaster
(bootloader) git:storsec: git:storsec
(bootloader) gitrov: gitrov
(bootloader) qe: "qe 0/0"
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: att
(bootloader) current-slot:
(bootloader) running-bl-slot: _b/_b
(bootloader) running-boot-lun: 3
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: yes
(bootloader) slot-unbootable:_b: yes
(bootloader) slot-retry-count:_a: 0
(bootloader) slot-retry-count:_b: 0
all: listed above
finished. total time: 0.206s
Click to expand...
Click to collapse
Try Flash/rescue option in
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Another note is that both att and tmo models are xt 1789-04, so the if your phone is telling you it's an att then there is no way to unlock the bootloader.
Sent from my moto z4 using XDA Labs
sd_shadow said:
Try Flash/rescue option in
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Click to expand...
Click to collapse
Tried this multiple times but my phone can't get past fastboot so I can't check the USB debugging or even have the phone detected by the LMSA. when i manually tell the program that it's an xt-1789-04, it will get as far as cmd: getvar:serialno before saying it can't match the product with the model number.

"Invalid partition name boot" error

I'm currently on a bootloop on a rooted device that was working fine, and trying to flash a firmware so it can reset (tried factory reset to no deal)
When I try to flash the boot.img I get:
C:\adb\update>fastboot flash boot boot.img
target reported max download size of 268435456 bytes
sending 'boot' (32768 KB)...
OKAY [ 1.048s]
writing 'boot'...
(bootloader) Invalid partition name boot
FAILED (remote failure)
finished. total time: 1.054s
I also tried to flash lineage 17.1 but get "erase permission denied"
baigun said:
I'm currently on a bootloop on a rooted device that was working fine, and trying to flash a firmware so it can reset (tried factory reset to no deal)
When I try to flash the boot.img I get:
C:\adb\update>fastboot flash boot boot.img
target reported max download size of 268435456 bytes
sending 'boot' (32768 KB)...
OKAY [ 1.048s]
writing 'boot'...
(bootloader) Invalid partition name boot
FAILED (remote failure)
finished. total time: 1.054s
I also tried to flash lineage 17.1 but get "erase permission denied"
Click to expand...
Click to collapse
What does getvar all say? (remove the imei before posting)
Code:
fastboot getvar all
sd_shadow said:
What does getvar all say? (remove the imei before posting)
Code:
fastboot getvar all
Click to expand...
Click to collapse
C:\Users\Kon>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-lima_32_retail-613092d79-210317
(bootloader) product: lima
(bootloader) board: lima
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 2
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SAMSUNG 4X6KMB RV=08 PV=00 FV=0000000000000003
(bootloader) ram: 2GB UNKNOWN LP4 DIE=4Gb M5=00 M6=00 M7=00 M8=00
(bootloader) cpu: MT6771V/WL
(bootloader) serialno: 0066225513
(bootloader) cid: 0x0032
(bootloader) channelid: 0x19
(bootloader) uid: C4BECDAB9137B413000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 268435456
(bootloader) reason: Volume down key pressed
(bootloader) imei: 355555112592799
(bootloader) imei2: 355555112592807
(bootloader) meid:
(bootloader) date: 05-13-2020
(bootloader) sku: XT2015-2
(bootloader) carrier_sku: XT2015-2
(bootloader) battid: SB18C55376
(bootloader) iccid:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Wed Jan 2 21:46:38 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/lima_32/lima:10/QMDS30.47
(bootloader) ro.build.fingerprint[1]: -19-4/71fae:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.mtk: alps-mp-q0.mp1.tc2sp-V1.53
(bootloader) version-baseband: MT6771_V70.02.01.108R
(bootloader) kernel.version[0]: Linux version 4.14.141+ ([email protected]
(bootloader) kernel.version[1]: build) (gcc version 4.9.x 20150123 (prer
(bootloader) kernel.version[2]: elease) (GCC)) #1 SMP PREEMPT Mon Jan 25
(bootloader) kernel.version[3]: 04:26:14 CST 2021
(bootloader) frp-state: protected (144)
(bootloader) ro.carrier: retbr
(bootloader) current-slot: a
(bootloader) running-boot-lun: 0
(bootloader) running-slot: _a
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-bootable:_a: yes
(bootloader) slot-bootable:_b: no
(bootloader) slot-retry-count:_a: 0
(bootloader) slot-retry-count:_b: 0
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) pcb-part-no: SB28C73269
all: listed above
finished. total time: 0.126s
baigun said:
C:\Users\Kon>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-lima_32_retail-613092d79-210317
(bootloader) product: lima
(bootloader) board: lima
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 2
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SAMSUNG 4X6KMB RV=08 PV=00 FV=0000000000000003
(bootloader) ram: 2GB UNKNOWN LP4 DIE=4Gb M5=00 M6=00 M7=00 M8=00
(bootloader) cpu: MT6771V/WL
(bootloader) serialno: 0066225513
(bootloader) cid: 0x0032
(bootloader) channelid: 0x19
(bootloader) uid: C4BECDAB9137B413000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 268435456
(bootloader) reason: Volume down key pressed
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 05-13-2020
(bootloader) sku: XT2015-2
(bootloader) carrier_sku: XT2015-2
(bootloader) battid: SB18C55376
(bootloader) iccid:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Wed Jan 2 21:46:38 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/lima_32/lima:10/QMDS30.47
(bootloader) ro.build.fingerprint[1]: -19-4/71fae:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.mtk: alps-mp-q0.mp1.tc2sp-V1.53
(bootloader) version-baseband: MT6771_V70.02.01.108R
(bootloader) kernel.version[0]: Linux version 4.14.141+ ([email protected]
(bootloader) kernel.version[1]: build) (gcc version 4.9.x 20150123 (prer
(bootloader) kernel.version[2]: elease) (GCC)) #1 SMP PREEMPT Mon Jan 25
(bootloader) kernel.version[3]: 04:26:14 CST 2021
(bootloader) frp-state: protected (144)
(bootloader) ro.carrier: retbr
(bootloader) current-slot: a
(bootloader) running-boot-lun: 0
(bootloader) running-slot: _a
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-bootable:_a: yes
(bootloader) slot-bootable:_b: no
(bootloader) slot-retry-count:_a: 0
(bootloader) slot-retry-count:_b: 0
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) pcb-part-no: SB28C73269
all: listed above
finished. total time: 0.126s
Click to expand...
Click to collapse
I don't see anything wrong there.
Try a different USB port or PC
See if there is an update to the SDK platform-tools
Tried an older stock rom, android 9, it worked, tried to update and now I get
"dm-verity corruption
This device can't be trusted,
please press the power button to boot or the phone will power off in 5s."
Did I brick my phone? :c
new getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-lima_32_retail-dd9cedf-190906
(bootloader) product: lima
(bootloader) board: lima
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 2
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SAMSUNG 4X6KMB RV=08 PV=00 FV=0000000000000003
(bootloader) ram: 2GB UNKNOWN LP4 DIE=4Gb M5=00 M6=00 M7=00 M8=00
(bootloader) cpu: MT6771V/WL
(bootloader) serialno: 0066225513
(bootloader) cid: 0x0032
(bootloader) channelid: 0x19
(bootloader) uid: C4BECDAB9137B413000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 268435456
(bootloader) reason: Volume down key pressed
(bootloader) imei: 355555112592799
(bootloader) imei2: 355555112592807
(bootloader) meid:
(bootloader) date: 05-13-2020
(bootloader) sku: XT2015-2
(bootloader) carrier_sku: XT2015-2
(bootloader) battid: SB18C55376
(bootloader) iccid:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Mon Jun 14 1: 4:28 UTC 2021"
(bootloader) ro.build.fingerprint[0]: motorola/lima_32/lima:9/PMD29.70-3
(bootloader) ro.build.fingerprint[1]: 7-1/5022a:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.41.1.lima_32.reta
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.mtk: alps-mp-p0.mp1.tc2sp-V1.47
(bootloader) version-baseband: MT6771_V9.04.01.79R
(bootloader) kernel.version[0]: Linux version 4.4.146 ([email protected]
(bootloader) kernel.version[1]: 54) (gcc version 4.9.x 20150123 (prerele
(bootloader) kernel.version[2]: ase) (GCC) ) #1 SMP PREEMPT Fri Sep 6 07
(bootloader) kernel.version[3]: :50:09 CDT 2019
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: retbr
(bootloader) current-slot: a
(bootloader) running-boot-lun: 0
(bootloader) running-slot: _a
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-bootable:_a: yes
(bootloader) slot-bootable:_b: no
(bootloader) slot-retry-count:_a: 0
(bootloader) slot-retry-count:_b: 0
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) pcb-part-no: SB28C73269
all: listed above
finished. total time: 0.129s
baigun said:
Tried an older stock rom, android 9, it worked, tried to update and now I get
"dm-verity corruption
This device can't be trusted,
please press the power button to boot or the phone will power off in 5s."
Did I brick my phone? :c
new getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-lima_32_retail-dd9cedf-190906
(bootloader) product: lima
(bootloader) board: lima
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 2
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SAMSUNG 4X6KMB RV=08 PV=00 FV=0000000000000003
(bootloader) ram: 2GB UNKNOWN LP4 DIE=4Gb M5=00 M6=00 M7=00 M8=00
(bootloader) cpu: MT6771V/WL
(bootloader) serialno: 0066225513
(bootloader) cid: 0x0032
(bootloader) channelid: 0x19
(bootloader) uid: C4BECDAB9137B413000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 268435456
(bootloader) reason: Volume down key pressed
(bootloader) imei: 355555112592799
(bootloader) imei2: 355555112592807
(bootloader) meid:
(bootloader) date: 05-13-2020
(bootloader) sku: XT2015-2
(bootloader) carrier_sku: XT2015-2
(bootloader) battid: SB18C55376
(bootloader) iccid:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Mon Jun 14 1: 4:28 UTC 2021"
(bootloader) ro.build.fingerprint[0]: motorola/lima_32/lima:9/PMD29.70-3
(bootloader) ro.build.fingerprint[1]: 7-1/5022a:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.41.1.lima_32.reta
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.mtk: alps-mp-p0.mp1.tc2sp-V1.47
(bootloader) version-baseband: MT6771_V9.04.01.79R
(bootloader) kernel.version[0]: Linux version 4.4.146 ([email protected]
(bootloader) kernel.version[1]: 54) (gcc version 4.9.x 20150123 (prerele
(bootloader) kernel.version[2]: ase) (GCC) ) #1 SMP PREEMPT Fri Sep 6 07
(bootloader) kernel.version[3]: :50:09 CDT 2019
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: retbr
(bootloader) current-slot: a
(bootloader) running-boot-lun: 0
(bootloader) running-slot: _a
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-bootable:_a: yes
(bootloader) slot-bootable:_b: no
(bootloader) slot-retry-count:_a: 0
(bootloader) slot-retry-count:_b: 0
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) pcb-part-no: SB28C73269
all: listed above
finished. total time: 0.129s
Click to expand...
Click to collapse
It's never a good idea to downgrade a Moto and then install an OTA update.
Try LMSA's Rescue option
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
I used an up to date stock and it resolved, thank you sd_shadow for the support, I dunno what exactly was causing both problems, but it went good eventually

Question Unable to unlock bootloader of motog60

I am trying to unlock the bootloader of my device but it dosent work on the motorola website the steps to unlock bootloader are:
1) reboot to bootloader
2) connect your phone to pc
3) then in cmd type fasboot oem get_unlock_data
After this we should get a string that we have to copy and paste on the website but, every time i run the command in step 3 i get an error saying (bootloader) FAILED
I dont understand what am i doing wrong ? I have unlocked the oem from developer options too.
Please help!
Xplo!t_A said:
I am trying to unlock the bootloader of my device but it dosent work on the motorola website the steps to unlock bootloader are:
1) reboot to bootloader
2) connect your phone to pc
3) then in cmd type fasboot oem get_unlock_data
After this we should get a string that we have to copy and paste on the website but, every time i run the command in step 3 i get an error saying (bootloader) FAILED
I dont understand what am i doing wrong ? I have unlocked the oem from developer options too.
Please help!
Click to expand...
Click to collapse
Try a different usb port, cable and pc
These can all cause this error.
sd_shadow said:
Try a different usb port, cable and pc
These can all cause this error.
Click to expand...
Click to collapse
tried on a WIN7 pc with all drivers installed properly and used a different cable. Here is my console output:
C:\Users\awadh>fastboot oem get_unlock_data
...
(bootloader) Failed to get unlock data.
OKAY [ 0.047s]
finished. total time: 0.047s
Xplo!t_A said:
tried on a WIN7 pc with all drivers installed properly and used a different cable. Here is my console output:
C:\Users\awadh>fastboot oem get_unlock_data
...
(bootloader) Failed to get unlock data.
OKAY [ 0.047s]
finished. total time: 0.047s
Click to expand...
Click to collapse
Try a factory reset
sd_shadow said:
Try a factory reset
Click to expand...
Click to collapse
Did a factory reset still no change.
Did you enable OEM unlock in developer settings? I was just wondering if unlocking this device could be difficult because of ThinkShield security
vatsalc said:
Did you enable OEM unlock in developer settings? I was just wondering if unlocking this device could be difficult because of ThinkShield security
Click to expand...
Click to collapse
Did that too form the dev settings. Still the problem persists
Here is the output of "fastboot get_var all" of my device if it helps.
C:\Users\awadh>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-hanoip_r
(bootloader) product: hanoip
(bootloader) board: hanoip
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: EUAPEM
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 128GB SKhynix H9HQ15AECMBDAR FV
(bootloader) ram: 6GB SKHYNIX LP4x DIE=16Gb M5-M8
(bootloader) cpu: SM7150 1.0
(bootloader) serialno: ZF6526V5GC
(bootloader) cid: 0x0032
(bootloader) channelid: 0xc0
(bootloader) uid: 3B77226B
(bootloader) securestate: oem_locked
(bootloader) factory-modes: disabled
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 805306368
(bootloader) reason: Volume down key pressed
(bootloader) meid:
(bootloader) date: 05-12-2021
(bootloader) sku: XT2135-2
(bootloader) carrier_sku: XT2135-2
(bootloader) battid: SB18D01687
(bootloader) battery-voltage: 3821
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) poweroffalarm: 0
(bootloader) ro.carrier: retin
(bootloader) ro.build.fingerprint[0]: motorola/ha
(bootloader) ro.build.fingerprint[1]: /RRI31.Q1-4
(bootloader) ro.build.fingerprint[2]: se-keys
(bootloader) ro.build.version.qcom: LA.UM.9.1.r1-
(bootloader) version-baseband[0]: M7150_09.297.01
(bootloader) version-baseband[1]: CUST
(bootloader) kernel.version[0]: Linux version 4.1
(bootloader) kernel.version[1]: roid-build) (clan
(bootloader) kernel.version[2]: droid NDK, GNU ld
(bootloader) kernel.version[3]: f) 2.27.0.2017031
(bootloader) kernel.version[4]: un 11 07:59:53 CD
(bootloader) git:xbl: MBM-3.0-hanoip_retail-e9068
(bootloader) git:xbl_config: MBM-3.0-hanoip_retai
(bootloader) git:aop: MBM-3.0-hanoip_retail-4bfd5
(bootloader) git:tz: MBM-3.0-hanoip_retail-994049
(bootloader) git:hyp: MBM-3.0-hanoip_retail-99404
(bootloader) git:devcfg: MBM-3.0-hanoip_retail-99
(bootloader) git:cmnlib: MBM-3.0-hanoip_retail-99
(bootloader) git:keymaster: MBM-3.0-hanoip_retail
(bootloader) git:storsec: MBM-3.0-hanoip_retail-9
(bootloader) gitrov: MBM-3.0-hanoip_retail-9940
(bootloader) git:abl: MBM-3.0-hanoip_retail-aea4f
(bootloader) git:qupfw: MBM-3.0-hanoip_retail-6ac
(bootloader) git:uefisecapp: MBM-3.0-hanoip_retai
(bootloader) frp-state: no protection (77)
(bootloader) current-slot: b
(bootloader) running-bl-slot: _b/_b
(bootloader) running-boot-lun: 3
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: yes
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 6
(bootloader) logical-block-size: 0x1000
(bootloader) erase-block-size: 0x1000
(bootloader) is-userspace: no
(bootloader) pcb-part-no: SB28D03162
(bootloader) primary-display: tm_ili7807s_fhd_vid
(bootloader) secondary-display:
all: listed above
finished. total time: 1.217s
Xplo!t_A said:
Here is the output of "fastboot get_var all" of my device if it helps.
C:\Users\awadh>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-hanoip_r
(bootloader) product: hanoip
(bootloader) board: hanoip
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: EUAPEM
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 128GB SKhynix H9HQ15AECMBDAR FV
(bootloader) ram: 6GB SKHYNIX LP4x DIE=16Gb M5-M8
(bootloader) cpu: SM7150 1.0
(bootloader) serialno: ZF6526V5GC
(bootloader) cid: 0x0032
(bootloader) channelid: 0xc0
(bootloader) uid: 3B77226B
(bootloader) securestate: oem_locked
(bootloader) factory-modes: disabled
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 805306368
(bootloader) reason: Volume down key pressed
(bootloader) meid:
(bootloader) date: 05-12-2021
(bootloader) sku: XT2135-2
(bootloader) carrier_sku: XT2135-2
(bootloader) battid: SB18D01687
(bootloader) battery-voltage: 3821
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) poweroffalarm: 0
(bootloader) ro.carrier: retin
(bootloader) ro.build.fingerprint[0]: motorola/ha
(bootloader) ro.build.fingerprint[1]: /RRI31.Q1-4
(bootloader) ro.build.fingerprint[2]: se-keys
(bootloader) ro.build.version.qcom: LA.UM.9.1.r1-
(bootloader) version-baseband[0]: M7150_09.297.01
(bootloader) version-baseband[1]: CUST
(bootloader) kernel.version[0]: Linux version 4.1
(bootloader) kernel.version[1]: roid-build) (clan
(bootloader) kernel.version[2]: droid NDK, GNU ld
(bootloader) kernel.version[3]: f) 2.27.0.2017031
(bootloader) kernel.version[4]: un 11 07:59:53 CD
(bootloader) git:xbl: MBM-3.0-hanoip_retail-e9068
(bootloader) git:xbl_config: MBM-3.0-hanoip_retai
(bootloader) git:aop: MBM-3.0-hanoip_retail-4bfd5
(bootloader) git:tz: MBM-3.0-hanoip_retail-994049
(bootloader) git:hyp: MBM-3.0-hanoip_retail-99404
(bootloader) git:devcfg: MBM-3.0-hanoip_retail-99
(bootloader) git:cmnlib: MBM-3.0-hanoip_retail-99
(bootloader) git:keymaster: MBM-3.0-hanoip_retail
(bootloader) git:storsec: MBM-3.0-hanoip_retail-9
(bootloader) gitrov: MBM-3.0-hanoip_retail-9940
(bootloader) git:abl: MBM-3.0-hanoip_retail-aea4f
(bootloader) git:qupfw: MBM-3.0-hanoip_retail-6ac
(bootloader) git:uefisecapp: MBM-3.0-hanoip_retai
(bootloader) frp-state: no protection (77)
(bootloader) current-slot: b
(bootloader) running-bl-slot: _b/_b
(bootloader) running-boot-lun: 3
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: yes
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 6
(bootloader) logical-block-size: 0x1000
(bootloader) erase-block-size: 0x1000
(bootloader) is-userspace: no
(bootloader) pcb-part-no: SB28D03162
(bootloader) primary-display: tm_ili7807s_fhd_vid
(bootloader) secondary-display:
all: listed above
finished. total time: 1.217s
Click to expand...
Click to collapse
CID should be good
Code:
(bootloader) cid: 0x0032
You're not using a VPN or something else that would alter your internet access?
sd_shadow said:
CID should be good
Code:
(bootloader) cid: 0x0032
You're not using a VPN or something else that would alter your internet access?
Click to expand...
Click to collapse
Nope
finally after the latest security patch update some how i was able to get unlock data for bootloader
Hi! I have a Motorola G60, I opened the bootloader, but couldn't find any modified ROMs for it. I didn't change anything, I didn't root.
How to lock the bootloader?
Fastboot oem lock?

Categories

Resources