When putting my device on wireless charger I get ui as shown in fotographs added.
Unfortunatly this ui shows up too, when I put it in my wireless charging car dock. Due to vibritations etc while driving, it shows up very often and overlays running apps like navigation, which is very anoying if you miss turns.
Thats why I am searching for a way to temporarily dissable (toggle on/off) this ui
Related
Hi everyone,
just came across this interesting Wiki guide. It explains how to make a cell phone battery last longer between charges, and how to prolong the overall life of the battery. To many of you, it will already be common knowledge, but there are still alot of interesting pointers mentioned.
For example, it states that lithium-ion batteries should be charged for about 5-6 hours and we should ignore the phone telling you that the battery is full... it states that this is normal but is not accurate if the battery is not initialized. It goes on to say that we should NOT fully discharge a lithium-ion battery, because unlike Ni-Cd batteries, a lithium-ion batteries life is shortened every time you fully discharge them. Instead, charge them when the battery meter shows one bar left. Lithium-ion batteries, like most rechargeable batteries have a set amount of chargers in them.
Please share your findings, opinions, and any further tests you have carried out to improve battery performance for your Desire.
Thanks.
Battery Saving Tips:
There are loads of "tweaks" you can make to imporve battery life span:
1. Lower screen brightness. Go to Settings -> Sound & display -> Brightness. Slide the brightness switch to the left to lower it or check the "Automatic brightness" box to let the phone use its sensors to adjust the screen according to the ambient light. You can also find dedicated screen brightness widgets in Android Market.
2. Turn off 3G, WiFi, GPS, and Bluetooth when you don't need them. The easiest way to manage these wireless radios is to use the Settings widget preinstalled on your phone. Tap the + button on your home screen -> Widget -> Settings. Once your chosen widgets are on any of your home screens, a simple tap turns each one on/off. You can also use "Power Control" widget found in home screen -> Widget -> Power Control. There are other widgets that do this in Android Market (e.g. SwitchPro), but these are already preinstalled and they're a nice-looking set.
3. Disable WiFi and 3G network notifications. Go to Settings -> Wireless & networks -> Wi-Fi settings. Uncheck the Network notification box so your phone isn't constantly scanning and looking for open networks to tell you about. For 3G, go to Settings -> Wireless & networks -> Mobile Networks.
4. Disable "always on" mobile data. This is one of the biggest battery savers. Go to Settings -> Wireless & networks -> Mobile networks. Tap "Enable always-on mobile data" to uncheck the box. I haven't found a negative consequence of disabling this feature, as Gmail and other apps/functions still work perfectly.
5. Turn off background data. If you're not using Google services, go to Settings -> Accounts & sync and uncheck the Background data box so that applications cannot sync, send, and receive data whenever they want to.
6. Lower the screen timeout interval. The phone's screen can be set to automatically turn off when you don't interact with it for a predetermined amount of time: 15 seconds, 30 seconds, 1 minute, 2 minutes, 10 minutes, or never. Depending on what you're doing, a too-short interval can become annoying (especially if you didn't disable your lock screen), so choose wisely.
7. Manually turn off the screen when not in use. Since the screen timeout function ensures that the phone's screen will turn off (unless you have it set to "never turn off"), it can be tempting to put the phone down when you're done using it and just let the screen turn off by itself. Instead, give the power button at the top of the phone a quick push to turn it off manually.
8. Turn off auto-sync. Go to Settings -> Accounts & sync -> Auto-sync.
9. Change auto-sync frequency (Weather, News, Stocks, Twitter, etc). If you don't want to turn off auto-sync, you can adjust how frequently data is retrieved/updated. The settings vary depending on the app (and some don't offer the setting at all), but it's generally found in the same place: Settings -> Accounts & sync. Select an account from the list and then tap "Account settings" to change the sync frequency.
10. Disable wireless network location services when not needed. Go to Settings -> Location -> Use wireless networks. Note that this (or one of the other options) needs to be enabled if you want to see and/or use your location in apps like Maps.
11. Turn off window animations. To turn it off, go to Settings -> Sound & display -> Animation -> No animations.
12. Don't use a live wallpaper. Use a static wallpaper instead.
13. Use a dark wallpaper. Some say that dark wallpapers are more energy efficient than light wallpapers. Others say it doesn't make any difference. Either way, there's no harm in using a dark wallpaper so you may as well do it.
14. Change WiFi sleep policy. This may sound counter-intuitive, but leaving WiFi on when the phone isn't being used and the screen is off is actually better than letting it sleep. When WiFi sleeps, 3G wakes up to sync, get email, and retrieve other data. 3G will eat up more battery than WiFi, so go to Settings -> Wireless & networks -> Wi-Fi Settings. Press the Menu button and tap Advanced, then Wi-Fi sleep policy. Choose "Never" from the pop-up menu.
15. Monitor your running services (or consider using a task killer). Just because Android 2.1 is supposed to an intelligent operating system that will manage your running apps for you doesn't mean it will always do things the way you want them to be done.
You can take matters into your own hands by going to Settings -> Applications -> Running services, where you can view what your phone is doing and manually stop certain activities. You can also download a third-party task killer from Android Market and kill selected apps to free up some resources and potentially save some power. Task killers are a polarizing topic in the Android community, so tread lightly when looking for recommendations or asking for help with them.
16. Choose your home screen widgets carefully. Widgets that need access to the internet to update information (e.g., Facebook, Twitter, Engadget, Slacker Radio, Weather, Stocks, News, Mail) can suck up a lot of juice if not managed well, so choose them carefully and set their sync/update frequencies to a reasonable interval.
17. Disable notification lights. This may not be practical if you're someone who really needs/wants to know when something happens on your phone when you're not looking, but for everyone else, feel free to turn off those notifications. Go to Settings -> Sound & display -> Notification flash and uncheck all the boxes.
18. Turn off phone vibration. If the ringer is on, why do you need the phone to vibrate? You're already in a loud environment that drowns out the ring; answering the call won't quiet your surroundings so you can hear what the person at the end of the line is saying.
And if your phone is set to silent, then an incoming call should be silent. Yes, the buzzing vibration may not be disruptive as your ringtone, but people still hear it.
So go to Settings -> Sound & display -> Phone vibrate and turn it off.
19. Turn off audible touch tones. In Settings -> Sound & display, uncheck Audible selection and turn off Audible touch tones.
20. Turn off haptic feedback. Once you get the hang of typing on the phone's on-screen keyboard, you can turn off the haptic feedback that was turned on by default. Go to Settings -> Language & keyboard -> Touch Input -> Text input -> Vibrate when typing.
You can disable haptics in other areas of the system by going to Settings -> Sound & display -> Haptic feedback.
I just plug mine into the USB of my computer (which is on most of the time) when I'm at home. Apart from that I use my phone how I want to. If battery life becomes unbearable I'll get a spare battery.
Not too sure about the 5h charge. It doesn't make sense. First once the battery is full, its full. It depends on how this is measured, but usually when max voltage has been reached, the 100% is shown.
The charger of the Desire is 1A, while the battery is 1.4A. If its actually charging at 1A, a -completely- empty battery is fully charged after around 1.5 hours. Even if it were charging at a lousy 0.5A, battery should be fully charged after 3 hours.
So no idea where that figure comes from (perhaps very very low amp charging on other cellphones ).
And most important tips are indeed no full discharge, and (kinda hard to do) keeping the battery cool. Most important factors on battery life.
Removing Nimbuzz upped by Battery life by about 300%, not worrying about it any more now.
I read some article said the lithium-ion battery is based on the time of your recharging. That means the the total one full recharge is under counting. Say you used your battery from 100% to 50% and recharge it to 100% for the first day. two days later your battery goes to 50% again and you rechage it to 100% again. That is the total one full recharge. each lithium-ion battery can go over 2000 full recharging(I am not so sure it is the number). so it is nothing to do with the time you charging your battery.
badgerz said:
Removing Nimbuzz upped by Battery life by about 300%, not worrying about it any more now.
Click to expand...
Click to collapse
what is nimbuz?
Raminder1992 said:
what is nimbuz?
Click to expand...
Click to collapse
Looking on the market, it is an IM/Skype combo thing... I reckon his battery life improved vastly as he set it to constantly stay signed in/syncing every 15 minutes which will completely kill any battery performance...
Hello everybody. I have switched from a Galaxy S4 to a G4 and one thing I miss (or haven't enabled) is the desktop dock. On my S4 I just put it in the dock (also a Samsung) and it triggers dock mode and then I use Desk Clock Plus. But on G4 nothing gets triggered. Does anybody know if there is such a mode and if there is... am I missing a setting somewhere? Or maybe the Samsung dock is incompatible...
Thanks.
settings, display, daydream dont lock phone while putting it on dock (start up settings both, in daydream)
I have it on dock and it doesn't work. I have an workaround by using the slow charging notification (I have a 700mah power adapter to stress the battery as little as possible) and Trigger app to read the notification and launch the Desktop Clock. But it is just a workaround not the answer.
I want it to launch only when docked otherwise it works correctly if I allow day-dreaming when charging.
I've seen the method on the Tab S forum of XDA developers for amending the boot image but nothing yet for the Tab S2 8.0 (SM-T7130. Is anyone working on this?
My objective is to use my Tab S2 as a 'head unit' in my car and have it boot up in landscape mode. I've already changed the bootsamsung.qmg and bootsamsungloop.qmg with my own files and they are working fine in landscape. However, I don't know how to amend the boot image. The instructions for the Tab S don't appear to work for this model. Well, they didn't for me.
I'd much appreciate a pointer in the right direction.
Hi,
I am trying to do the same thing as you, use it as a head unit. How is it working out for you so far? Any issues?
Thank you
Nothing yet - and I'm unable to devote any time to it at the moment. Good luck with your search for a solution.
Well, I am in the design phase right now, just ordered the tablet.
Getting the boot logo in landscape mode is the least of my concern, I am more concern about everything else, specially how the tablet integrate with the rest of the hardware
checksum123 said:
Well, I am in the design phase right now, just ordered the tablet.
Getting the boot logo in landscape mode is the least of my concern, I am more concern about everything else, specially how the tablet integrate with the rest of the hardware
Click to expand...
Click to collapse
I can help with other stuff (than the boot logo 'problem') as I've set my TabS2 to provide a sort of Driver Information System (DIS) for my campervan.
Some of the changes I've made are as follows:
1. Auxiliary output from vehicle radio to 3.5mm jack on TabS2 so it can use the vehicle's excellent speakers. Bought the connector on the internet but some modern vehicles come with a connector fitted.
2. Fused electrical connection from 12V Cigar Lighter feed through 12V-to-USB (5V) mini-connector (also bought on internet) to TabS2.
3. Wifi reversing camera (GoVue RVS-020813) connected to reversing light 12V power feed. (Wifi because I didn't want to hardwire through the vehicle).
4. Created a slide-in frame on dashboard using plastic name holders, with draught-excluder tape behind to hold TabS2 off vibrating stuff.
5. Rooted the TabS2.
6. System/bin/lpm file moved sideways and replaced with one that contains
#!/system/bin/sh
su
/system/bin/reboot
which forces the TabS2 to boot when power is applied (via mini-USB connector). ie. when the vehicle is switched on and power then goes to the 12V cigar-lighter circuit and also the spur connection via the 12V-to-USB connector to the TabS2.
7. Replaced the boot animation (not boot logo) with my own animation in landscape. For which I used Samsung Theme Designer (look on Youtube for how to do this).
8. Enforced landscape mode (for post-boot animation) using the 'Set Orientation' app for those applications I have that are otherwise restricted to portrait mode (the inbuilt portrait/landscape setting doesn't work for these).
9. Bought/installed 'Sygic for Truck' navigation app.
10. Installed 'Govue' app to use with reversing camera.
11. Using 'Cronoid' app got it to fire up Sygic on boot.
12. Using 'Automagic' (premium) created flow to check for reversing camera (ie. when actually reversing vehicle, reversing camera gets power and Govue wifi pops up. This daemon checks for it). When it is detected the Govue app fires up to display the picture. This flow also checks for when vehicle stops reversing (forward gear or neutral selected); it then kills the Govue app and displays Sygic navigation.
13. To ensure everything could be controlled via the screen (a bit difficult getting to the buttons on the edges when you're driving along), I downloaded one-touch 'ScreenOff' and 'Power Off Click' icon apps for sleep and power-off, respectively. The 'Handy Soft Keys' app allows a touch at the top of the screen which will display icons to avoid using the physical buttons. The volume is easily controlled with swipe down from the top and moving the displayed slider as needed. (Note that the power cannot be switched off while there is power via the mini-USB connector, which also means that when it is being charged it will always be booted up).
The Tab S2 is a very good bit of kit. The reason for the sliding method of attachment is because it is far too useful to devote entirely to 'Head unit' duties. I use it as my everyday slate (it also means it isn't on show to potential thieves when I park up).
Was all the above necessary. It's a moot point. I enjoyed doing it. At that time I was able to spend the hours researching the techniques on the internet.
Hope this gives you some ideas.
Nice!!!
Looks like you got everything figure out, thank you for all the tips, will sure come in handy when I start the install.
I went to Best Buy to get the S2, but saw the Tab A right next to it. I finally decided to get the Tab A 10.1 inches (2016 version) which has an octacore cpu and 2gb ram/16gb rom. Unlike you I plan to use this solely in my car, so I am planning a permanent install. My dash has a big opening, so the 10.1 inch will fit nicely, I am planning to fabricate a custom bezel to mold the tab case into a metra stock bezel, might be a tight fit, but I want it to look factory when done. I have a 2015 nissan murano.
As far as the sound, I was planning on using a usb dac, since now marshmallow support usb sound, but now that you mention it, I might just use the 3.5mm jack to feed my clarion eqs755 which is then connected to my kenwood amp. This will save me from buying a DAC.
How is the sound from the 3.5mm jack compared to the usb sound with a DAC?
What are you using for bluetooth?
The wireless backup camera is a good idea, will do the same. I thought that the camera will open the app once it detects power (by you shifting to reverse), no additional app is required?
I did not want to root mine, but looks like I need to, since that is the only way to be able to use the usb port for data and charge the tablet at the same time.
I also plan to use my steering wheel connectors to control the tablet (vol+/vol-, ok google, switching between app, etc...)
Will let you know as I progress...
Would be nice to see some pics of your install.
Here are the components I bought so far:
These will allow me to tab into my existing speakers, since I added a amp:
https://www.amazon.com/gp/product/B009B8EJYU/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
Clarion eq, connects to my amp and sub:
https://www.amazon.com/gp/product/B00S7G1TW2/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
Galaxy Tab A case to fabricate into my dash:
https://www.amazon.com/gp/product/B01LX4TJY1/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
12V to 5V power adapter to charge the tablet and usb hub
https://www.amazon.com/gp/product/B00OHHT7ZG/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1
OTG cable:
https://www.amazon.com/gp/product/B00NSBVNCM/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1
Right angle connector for the sound:
https://www.amazon.com/gp/product/B...e_11?ie=UTF8&psc=1&smid=A04372963GF4ZZEA1VT47
To connect tablet to eq:
https://www.amazon.com/gp/product/B00DI89NPE/ref=ox_sc_act_title_10?ie=UTF8&psc=1&smid=AQJ30SX0INWVM
I plan to use this for the bluetooth, will connect it to my eq using an rca splitter, for hands free call and bluetooth streaming from phone:
https://www.amazon.com/dp/B0168GBMC...TF8&colid=218K2YEKLKIR3&coliid=I3IWHA254QICIF
I installed Tablet Talk to get my calls and text messages forwarded to the tablet. When I get a call I can answer from the tablet, but the sound will use my Bluetooth.
I wanted to use samsung own SideSync app, since I also have a samsung note 4 phone, for hands free calls, but it only works when connected to the same WIFI network. Tablet Talk works with WIFI/Hotspot and bluetooth.
https://www.amazon.com/dp/B0168GBMC...TF8&colid=218K2YEKLKIR3&coliid=I3IWHA254QICIF
For my steering wheel control:
https://www.amazon.com/dp/B0168GBMC...TF8&colid=218K2YEKLKIR3&coliid=I3IWHA254QICIF
Fleximaster said:
I can help with other stuff (than the boot logo 'problem') as I've set my TabS2 to provide a sort of Driver Information System (DIS) for my campervan.
Some of the changes I've made are as follows:
1. Auxiliary output from vehicle radio to 3.5mm jack on TabS2 so it can use the vehicle's excellent speakers. Bought the connector on the internet but some modern vehicles come with a connector fitted.
2. Fused electrical connection from 12V Cigar Lighter feed through 12V-to-USB (5V) mini-connector (also bought on internet) to TabS2.
3. Wifi reversing camera (GoVue RVS-020813) connected to reversing light 12V power feed. (Wifi because I didn't want to hardwire through the vehicle).
4. Created a slide-in frame on dashboard using plastic name holders, with draught-excluder tape behind to hold TabS2 off vibrating stuff.
5. Rooted the TabS2.
6. System/bin/lpm file moved sideways and replaced with one that contains
#!/system/bin/sh
su
/system/bin/reboot
which forces the TabS2 to boot when power is applied (via mini-USB connector). ie. when the vehicle is switched on and power then goes to the 12V cigar-lighter circuit and also the spur connection via the 12V-to-USB connector to the TabS2.
7. Replaced the boot animation (not boot logo) with my own animation in landscape. For which I used Samsung Theme Designer (look on Youtube for how to do this).
8. Enforced landscape mode (for post-boot animation) using the 'Set Orientation' app for those applications I have that are otherwise restricted to portrait mode (the inbuilt portrait/landscape setting doesn't work for these).
9. Bought/installed 'Sygic for Truck' navigation app.
10. Installed 'Govue' app to use with reversing camera.
11. Using 'Cronoid' app got it to fire up Sygic on boot.
12. Using 'Automagic' (premium) created flow to check for reversing camera (ie. when actually reversing vehicle, reversing camera gets power and Govue wifi pops up. This daemon checks for it). When it is detected the Govue app fires up to display the picture. This flow also checks for when vehicle stops reversing (forward gear or neutral selected); it then kills the Govue app and displays Sygic navigation.
13. To ensure everything could be controlled via the screen (a bit difficult getting to the buttons on the edges when you're driving along), I downloaded one-touch 'ScreenOff' and 'Power Off Click' icon apps for sleep and power-off, respectively. The 'Handy Soft Keys' app allows a touch at the top of the screen which will display icons to avoid using the physical buttons. The volume is easily controlled with swipe down from the top and moving the displayed slider as needed. (Note that the power cannot be switched off while there is power via the mini-USB connector, which also means that when it is being charged it will always be booted up).
The Tab S2 is a very good bit of kit. The reason for the sliding method of attachment is because it is far too useful to devote entirely to 'Head unit' duties. I use it as my everyday slate (it also means it isn't on show to potential thieves when I park up).
Was all the above necessary. It's a moot point. I enjoyed doing it. At that time I was able to spend the hours researching the techniques on the internet.
Hope this gives you some ideas.
Click to expand...
Click to collapse
How did you get the Tab S2 to boot on power EXACTLY? I've been trying for DAYS and i can't seem to get it to work. It's rooted and everything, tried altering the lpm file and it just shows the grey battery icon each time.
Hi guys, why I can't see the button top right to enable wireless display?
Noticed that as well when swiping down and not finding the wifi or bt icons to enable them. I also noticed that when i plugged the phone on t o charge the charging icon in the battery displayed that it was charging. Then when i went to pull down the USB connecting options drop down menu it wasnt there. Then once it did appear it was on the last option i used "transfering pics" instead of defaulting to "charging" like every other phone ive ever owned.
How can I fix it?
Wireless display is not officially supported by Google, so you won't find it in our phone. The only option is Google Cast (to Chromecast).
dhabsot said:
Wireless display is not officially supported by Google, so you won't find it in our phone. The only option is Google Cast (to Chromecast).
Click to expand...
Click to collapse
do you have root access if yes there's some props you have to add it to build prop
let me know if your phone rooted
Is there a way to disable that clock that appears only when wirelessly charging that takes the place of the AOD. I find it annoying that you cannot see the info on the display (notifications, etc) when this clock appears. I tried looking for a setting but can't find it anywhere. Any help would be aporeciated.