I have mistakenly installed wrong twrp recovery and after this i am not able to boot into my device.
When connected to PC its creating many Local Drives.
Please help me how to get my phone working.
I have tried QFIL method and getting below error:
COM Port number:3
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
Related
BROM ERROR:S_FT_ENABLE_DRAM_FAIL(4032)
[EMI] ENABLE DRAM FAILED!
[HINT]:
PLEASE CHECK YOUR LOAD MATCHES TO YOUR TARGET WHICH IS TO BE DOWNLOADED.
I have an LG G3 D855.
I mess my phone. I format the partitions. I have no recovery and download mode. I tried BoardDiag usingn v10e and v10b tot files. The download mode icon appears but after that, everything is black and detected in pc as Qualcomm.
I tried using kdz in BoardDiag. I Extracted DD85530B then chaing the .bins to .mbn. I succesfully flashed it. It dont have recovery mode, the android logo is dead and it has a red mark on it. But it has Download mode. When I try to flash using Flashtool, i get "Model Information Check Fail" error.
I read some thread. Some threads said that using 8974 Dll would fix that flash tool error. I tried. But it just lead to another error. I encountered the "CrossDll [] to [D855]" I'm stuck. I Don't know what to do. Someone please help me :'( :crying::crying::crying:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
I already tried that bro. No chance.
I flashed D85530B using board dia tool. I can access Download mode so I use Flashtool.
But it stuck at 6% iwth error:
[ 1:28:41] Port Close
[ 1:28:41] MasterBinBoardDLProcess() Error.
[ 1:28:41] ¡Ú¡Ú ERROR REASON : LAF_ERROR_PACKET_TIMEOUT
[ 1:28:41] CBasicComControl::IsConnected, the port(COM41) connection is not detected
[ 1:28:41] RunProcess() is fail.
[ 1:28:41] CBasicComControl::IsConnected, the port(COM41) connection is not detected
[ 1:28:41] [ 1:28:41] We can't communicate with Phone[KILO_Packet]
I hope someone will help me.
Hey Guys,
I got here an N910F from a good friend to repair it.
She told me that the Phone was not more turning on after an Update.
When I get the phone into the Downloading mode(sd card method and all) I get this
ddi: mmc_read failed
ODIN MODE (HIGH SPEED)
Product Name: SM-N910F
...
UDC START
ODIN: flash read failure
Error: There is no pit binary.
MMC: mmc_read fail
I tryed to flash it with an DBT(Debranded German) Android 6.0.1 Rom and I still get that error.
What can I do now?
I have a Lenovo A6020l36, and I'm trying to flash stock ROM, but no success. Tried to flash with QFIL, but I'm getting this error:
ERROR: function: sahara_rx_data:237 Unable to read packet header. Only read 0 bytes.
ERROR: function: sahara_main:924 Sahara protocol error
ERROR: function: main:303 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download
can someone help me??
Redownload stock rom and reinstall Qfil. Do you have OEM Unlock toggled? if not, the bootloader could be refusing to install the stock rom and you'll need to install a custom rom before. And don't try to install a lower android version. It could give errors or bugs after installing the rom.
I installed ui 4.0 triel version I faced some minor problems and would like to go back to ui 3.0 to wait for the stable version of ui 4.0 I used a tool OppoRealme-OFP-Flash_1.0-x64_Windows and I downloaded all roms I used everything and fastboot stuck
Until I experimented and put a recovery rate
These commands were used
1-reboot to recovery
boot booting device (blackscreen)
2-vol up+power butten sometimes
3-fastboot(reboot to recovery and wipe data
4- not booting devices loop fastboot\
5- open cmd type:
6-fastboot getvar current-slot
7-fastboot --set-active=a
7-reboot to recovery(wipe data)
8-reboot devices aftar wipe data 100%
Someone help me if he has an account MsmDownloadTool
I send you pm
go to fastboot connect you phone with your pc use the opporealmeofp flash tool and wait untill flash is done. After flash open cmd in adb folder and use the command
fastboot getvar current-slot
fastboot --set-active=a or b (if current slot a change it to b and if current slot b then change it to a)
hope it will help
mdsiyam said:
انتقل إلى fastboot وقم بتوصيل هاتفك بجهاز الكمبيوتر الخاص بك ، واستخدم أداة الفلاش opporealmeofp وانتظر حتى ينتهي الفلاش. بعد فلاش افتح cmd في مجلد adb واستخدم الأمر
fastboot getvar فتحة الحالية
fastboot --set-active = a أو b (إذا كانت الفتحة الحالية ، قم بتغييرها إلى b وإذا كانت الفتحة الحالية b ، فقم بتغييرها إلى a)
آمل أن يساعد
Click to expand...
Click to collapse
I ran into a tougher problem
I think I disabled everything, even the partition
2023-01-21 10:37:03.001 13: C:\Users\sadka\Downloads\Compressed\q3s\q3s.elf
2023-01-21 10:37:03.001
2023-01-21 10:37:03.002 10:37:02: ERROR: function: sahara_rx_data:276 Unable to read packet header. Only read 0 bytes.
2023-01-21 10:37:03.005
2023-01-21 10:37:03.006 10:37:02: ERROR: function: sahara_main:982 Sahara protocol error
2023-01-21 10:37:03.007
2023-01-21 10:37:03.007 10:37:02: ERROR: function: main:320 Uploading Image using Sahara protocol failed
2023-01-21 10:37:03.008
2023-01-21 10:37:03.009
2023-01-21 10:37:03.009 Download Fail:Sahara Fail:QSaharaServer Failrocess fail
2023-01-21 10:37:03.016 Finish Get GPT
Thanks for your help, I appreciate this