Code:
Code:
/* *** Disclaimer
* Your Warranty is now Void!
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* BOOM goes the Dynamite
*/
introduction
Hello everyone,
the goal of this kernel is to be stable and have many features
Features
-Compiled With Linaro 7.3
-CPU Governors:All stock+bioshock,blu_active,impulse,chill,relaxed,despair,intelliactive
-I/O sched: All stock+Sio,Sioplus,Zen,Fiops,Maple
-Disabled force-encrypition and Pre-rooted(magisk)(only stock version)
-Various options for input boost and touchboost
-KCAL V2
-Faux Sound
-Adreno idler
-WQ Power saving
-Blacklight dimmer
-Wireguard
-Boeffla wl blocker
-Some patches to optimize performance and battery life
-Minor fixs
-Other features and tweaks(check github)
Installation instructions
Stock:
-adb reboot bootloader
-fastboot flash boot boot.img
or
-fastboot boot boot.img(if you want to test it)
-fastboot reboot
Other versions
-reboot in recovery
-wipe cache and dalvik cache(recommanded)
-flash kernel
DOWNLOADS
PIE
Oreo
STOCK(DEPRECATED)
LOS14.1 & LOS14.1 Based(DEPRECATED)
CAF N based(DEPRECATED)
Thanks To
Code:
-Google
-Nexbit
-franciscofranco
-flar2
-frap129
-nathanchance
-all of commited in their sources & all of xda developers
XDA:DevDB Information
Pop kernel, Kernel for the Nextbit Robin
Contributors
linckandrea
Source
Pop kernel(STOCK)
Pop kernel(N/O/P)
Version Information
Status: Testing
Created 2017-11-17
Last Updated 2019-01-30
reserved
Thanks. Nice to see something new for our device.
Thank you for this. I'm going to test it out. I'm really happy to see a stock kernel with added features. I'm already rooted with SuperSU, I hope it won't conflict with magisk root in the kernel.
Subscribed to this thread, I am looking forward to knowing how good this kernel is for everyone.
L3R0N said:
Thank you for this. I'm going to test it out. I'm really happy to see a stock kernel with added features. I'm already rooted with SuperSU, I hope it won't conflict with magisk root in the kernel.
Click to expand...
Click to collapse
I think it is better to unroot before flashing the kernel(to avoid any complications)
Update
I added and changed many things in this version...
Changelog
1.Added Kcal V2
2.added Faux Sound control
3.Added fsync on/off support.
4.Msm: vidc: disable CPU L2 cache PC during video sessions
5.Added wakelock toggle for some wakelock(I will remove it in the next one to put boeffla_wl_blocker)
6.Add Impulse governor
7.General improves and bug fixes(see Github commits history)
DOWNLOAD
Benchmark result
governor:interactive
I/O sched Fiops
note:the results are relative
How is the battery life for you?
What was it before and whats its now?
/root said:
How is the battery life for you?
What was it before and whats its now?
Click to expand...
Click to collapse
Pretty good ( SOT:4/5h with 4g)
I'm working on a version for LOS 14.1 (Probably also works on LOS based roms) who wants to do testers, send me a pm
linckandrea said:
I'm working on a version for LOS 14.1 (Probably also works on LOS based roms) who wants to do testers, send me a pm
Click to expand...
Click to collapse
I'd be more than happy to test for you.
Is this kernel for 7.1.1 nougat or marshmallow stock?
StLucia said:
Is this kernel for 7.1.1 nougat or marshmallow stock?
Click to expand...
Click to collapse
This is for Stock Nougat (7.1.1).
L3R0N said:
I'd be more than happy to test for you.
Click to expand...
Click to collapse
thank you but it is no longer necessary
New Update
I've created a version for LOS 14.1 and LOS 14.1-based
Changelog:
1.Disable some kernel debug
2.Disable add_random
3.Add chill and relaxed governor
4.Optimized KSM
5.General improves and bug fixes(see Github commits history)
DOWNLOAD
DOWNLOAD(LOS14.1 & LOS14.1 based)
Thanks to @TheC92 @Sparubens @NurKeinNeid
for being a tester, and giving me their opinion on the kernel
linckandrea said:
New Update
I've created a version for LOS 14.1 and LOS 14.1-based
Changelog:
1.Disable some kernel debug
2.Disable add_random
3.Add chill and relaxed governor
4.Optimized KSM
5.General improves and bug fixes(see Github commits history)
Click to expand...
Click to collapse
Downloaded twice but get Error 1 when flashing.
Code:
Archive: /sdcard/Download/Pop.kernel(ether-LOS).zip
inflating: anykernel.sh
inflating: Image.gz-dtb
unzip: crc error
ls: /tmp/anykernel/tools: No such file or directory
Unzip failed. Aborting...
umount: can't umount /system: Invalid argument
Updater process ended with ERROR: 1
linckandrea said:
New Update
I've created a version for LOS 14.1 and LOS 14.1-based
Changelog:
1.Disable some kernel debug
2.Disable add_random
3.Add chill and relaxed governor
4.Optimized KSM
5.General improves and bug fixes(see Github commits history)
Click to expand...
Click to collapse
LOS ver.
Is it a version with additional updates in the test version? git has a new commit, but the newly downloaded file is the same as the test version.
L3R0N said:
Downloaded twice but get Error 1 when flashing.
Click to expand...
Click to collapse
strange try to download it with pc and after unzip it
TheC92 said:
LOS ver.
Is it a version with additional updates in the test version? git has a new commit, but the newly downloaded file is the same as the test version.
Click to expand...
Click to collapse
Is the same version you tested
(Because is stable)
linckandrea said:
strange try to download it with pc and after unzip it.
Click to expand...
Click to collapse
It does unzip but with a crc error. I've downloaded 6 times already.
Related
-------------------------------------------------------
-Sneaky Kernel-
-------------------------------------------------------
Search before asking
-------------------------------------------------------
What is zRam? Look here Link and here Link
-This kernel is only for Unlocked STOCK FW (Might work with MIUI, didn't test)-
-----------------------------------------------------------------------------------------------------------------------
Code:
[U]Sneaky-RC1[/U]
* Linux kernel base updated from 3.0.8 to [B]3.0.101[/B]
* Wifi Modules re compiled to match the current version
* Small fixes to Dynamic FSYNC
* Reduced Android Logger RAM Usage
* Kernel Compiled with SLQB Allocator instead of SLUB
* Added SYSF entry to make Gentle Fair Sleepers toogable - /sys/kernel/sched/gentle_fair_sleepers (insert a 0)
* Updated and added VR IO Scheduler
* Frandom Support added to Kernel so You can use [B]CrossBreeder app[/B] [URL="http://forum.xda-developers.com/showthread.php?
* ZRAM Enabled - If you want to enable and use it flash the attached zip file
* VM Cache Pressure - Reduced from 100 to 25
* Enabled more I/O Schedulers
* USB OTG Support - Untested
* Dynamic FSync Enabled by default - Can be disabled with Trickster mod.
[U]Governors:[/U] [URL="http://forum.xda-developers.com/showthread.php?t=1369817"]Link[/URL] and [URL="http://forum.xda-developers.com/showthread.php?t=2005306"]Link[/URL]
K3hotplug (Default)
interactive
ondemand
performance
Zzmoove 0.7 [URL="http://forum.xda-developers.com/showpost.php?p=40405578&postcount=603"]Info Link[/URL] - Need some more tunning, currently unstable.
[U]I/O Schedulers:[/U] [URL="http://forum.xda-developers.com/showthread.php?t=1369817"]Link[/URL]
Noop
ROW (Default)
CFQ
Deadline
Zen
Sio
Sio Plus
-----------------------------------------------------------------------------------------------------------------------
Known Issues:
Post #3
-----------------------------------------------------------------------------------------------------------------------
Download section:
Post #2
-----------------------------------------------------------------------------------------------------------------------
How to flash:
CWM file in a custom recovery
-----------------------------------------------------------------------------------------------------------------------
How to tweak:
Use any CPU control app to change I/O scheduler and Governor
Trickster MOD Kernel Settings
[APP]Zram & Swap Control [CACHE & PARTITION]
-----------------------------------------------------------------------------------------------------------------------
Credit:
AndreiLux
yank555.lu
Xda
Perka - for the Post Template
Huawei
Surdu_Petru
ZaneZam
DooMLoRD
Linus Torvalds
and all the devs I cherry-pick from
-----------------------------------------------------------------------------------------------------------------------
Remember! You flash your Ascend P6 not me
-----------------------------------------------------------------------------------------------------------------------
If you want to add Sneaky to your ROM its fine.
-----------------------------------------------------------------------------------------------------------------------
Sources can be found in my Github Here
-----------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------
Downloads Enjoy!
-----------------------------------------------------------------
Code:
[SIZE="3"]Flashing Instructions
Recovery Package: Put Zip File in SD or External SD and flash through TWRP Recovery.
Fastboot: Open the .zip file and extract boot.img from it.
Connect the phone to the PC and:
* Open CMD and type:
* adb reboot bootloader
* fastboot flash boot boot.img
* fastboot reboot
For the Zram Script, upack it and move it to /system/etc/init.d
----------------------------------------------------------------------
If you want to support me press the thx button and buy me a beer
----------------------------------------------------------------------[/SIZE]
Known Issues
-This kernel is only for B118CN and B120CN FW, don't test in others without unlock bootloader-
-----------------------------------------------------------------------------------------------------------------------
Code:
[SIZE="4"][B]-Currently not working with HDS Pilot Set of Scripts [URL="http://forum.xda-developers.com/showthread.php?t=2580436"]Link HERE[/URL] -[/B] If you want to run his set of scripts, before flashing this kernel go to /system/etc/init.d and delete the file named "50InsmodModules"[/SIZE]
[/indent][/CENTER]
Last One
Nice to see more devs for our P6. Great work with this kernel.
I have a question about it. It`s any chance to OC a kernel for P6?
krave95 said:
Nice to see more devs for our P6. Great work with this kernel.
I have a question about it. It`s any chance to OC a kernel for P6?
Click to expand...
Click to collapse
Probably yes, but since there is no documentation about Huawei's K3V2 Chip it might be a little harder to get. We'll see how things play for our Phone ...
I am glad you liked how I posted my Kernel, but did you need to copy it all?
http://forum.xda-developers.com/showthread.php?t=2168812
Anyway, thx.
Perka said:
I am glad you liked how I posted my Kernel, but did you need to copy it all?
http://forum.xda-developers.com/showthread.php?t=2168812
Anyway, thx.
Click to expand...
Click to collapse
Sorry about that, honestly I really like it and didn't think it would be an issue. If you disagree I can remove it. Again I'm sorry if this offends You in anyway... Mentioned you in the OP though as credit for the template
jimbo77 said:
Sorry about that, honestly I really like it and didn't think it would be an issue. If you disagree I can remove it. Again I'm sorry if this offends You in anyway... Mentioned you in the OP though as credit for the template
Click to expand...
Click to collapse
Not offended. Use it
jimbo77 said:
Last One
Click to expand...
Click to collapse
Thanks A Lot Will Test And Give Feedback ASAP.
hope this will open new doors for our phones
Link with sources added to OP...
Sneaky Kernel RC1
Changelog:
Code:
Sneaky-RC1
* Linux kernel base updated from 3.0.8 to [B]3.0.101[/B]
* Wifi Modules re compiled to match the current version
* Small fixes to Dynamic FSYNC
* Reduced Android Logger RAM Usage
* Kernel Compiled with SLQB Allocator instead of SLUB
* Added SYSF entry to make Gentle Fair Sleepers toogable - /sys/kernel/sched/gentle_fair_sleepers (insert a 0)
* Updated and added VR IO Scheduler
* Frandom Support added to Kernel so You can use [B]CrossBreeder app[/B] [URL="http://forum.xda-developers.com/showthread.php?t=2113150"]Here[/URL]
Downloads will be added to 2nd Post in a moment, once I build the zip with the Wifi Modules
EDIT: Sneaky_RC1 Uploaded to 2nd POST! Happy Flashing!!
EDIT2: Make a Backup in case your Wifi doesn't work after flashing the kernel...
wow thanx so much for the work ! hope you will keep it up !
Uploaded new version of the .zip file that successfully flashes both kernel and wifi modules, make sure to use the RC1 version.
Any feedback on the kernel yet?
jimbo77 said:
Uploaded new version of the .zip file that successfully flashes both kernel and wifi modules, make sure to use the RC1 version.
Any feedback on the kernel yet?
Click to expand...
Click to collapse
Well you stated it's for stock, so I'm not reporting a bug, just want to let users know: It doesn't work on CM. com.android.phone has stopped.
When I'm back on stock I'll test and report.
PulseDroid said:
Well you stated it's for stock, so I'm not reporting a bug, just want to let users know: It doesn't work on CM. com.android.phone has stopped.
When I'm back on stock I'll test and report.
Click to expand...
Click to collapse
I´ll spin a build with CM support... Did you test on CM 10.1 or PacMAN ROM?
If the phone boots then it must be just an issue with the ramdisk.. Thanks for the feedback...
jimbo77 said:
I´ll spin a build with CM support... Did you test on CM 10.1 or PacMAN ROM?
If the phone boots then it must be just an issue with the ramdisk.. Thanks for the feedback...
Click to expand...
Click to collapse
CM - Ought to be yes, because when I deleted Phone.apk and Telephonyprovider.apk to test the kernel out, it worked.
jimbo77 said:
I´ll spin a build with CM support... Did you test on CM 10.1 or PacMAN ROM?
If the phone boots then it must be just an issue with the ramdisk.. Thanks for the feedback...
Click to expand...
Click to collapse
Hello !
You can use my modified ramdisk for CM on your kernel ! Is the same ramdisk for CM & also Pac-Man !
Good luck !
with rc1 the wifi is not working on b120cn
STAX KERNEL FOR AOSP ROMS
Code:
/* *** Disclaimer
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This kernel is based on AICP's 4.4 Kernel, so it won't work on official cyanogen. But should work on AICP, CAF PA, CAF CM, MAHDI & AOKP. (tested only in AICP)
Changelog:
Code:
v1.0 (initial):
-Governor "ondemand" as default (with a lot of optimizations)
-ROW as default I/O scheduler
-Sweep2Sleep
-Disabled a lot of debug spams
-Lower min_brightness (Much better for dark places (movie theater, etc) )
-Optimizations in gpu and processor
-Kernel bumped (should work with KK bootloader)
-Compiled with Linaro 4.9 (A15 optimizated) using -O2 flag
-All the AICP's kernel stuff:
-FAUX SOUND
-Intelliplug
-Updated Kernel (3.4.104)
-Powersuspend
-Better lowmemorykiller
-Etc & etc...
Credits:
AICP Team (for the kernel base) :good:
Savoca (helps me a lot) :angel:
Dorimanx (helps me too) :highfive:
FranciscoFranco (some kernel tweaks)
RenderBroken (some kernel tweaks)
Downloads:
MEGA Mirror
Source
XDA:DevDB Information
STAX KERNEL, Kernel for the LG G2
Contributors
daniel.stuart14
Kernel Special Features: This kernel have all the stuff from AICP's kernel, and my modifications. Like sweep2sleep, lower min_brightness, better ondemand gov, etc.
Version Information
Status: Alpha
Current Beta Version: 1.0
Beta Release Date: 2014-11-24
Created 2014-11-25
Last Updated 2014-11-25
O yee thanks bro.work ****ing nice cool on d803
---------- Post added at 02:21 AM ---------- Previous post was at 02:20 AM ----------
daniel.stuart14 said:
STAX KERNEL FOR AOSP ROMS
Code:
/* *** Disclaimer
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This kernel is based on AICP's 4.4 Kernel, so it won't work on official cyanogen. But should work on AICP, PA, MAHDI & AOKP. (tested only in AICP)
Changelog:
Code:
v1.0 (initial):
-Governor "ondemand" as default (with a lot of optimizations)
-ROW as default I/O scheduler
-Sweep2Sleep
-Disabled a lot of debug spams
-Lower min_brightness (Much better for dark places (movie theater, etc) )
-Optimizations in gpu and processor
-Kernel bumped (should work with KK bootloader)
-Compiled with Linaro 4.9 (A15 optimizated) using -O2 flag
-All the AICP's kernel stuff:
-FAUX SOUND
-Intelliplug
-Updated Kernel (3.4.104)
-Powersuspend
-Better lowmemorykiller
-Etc & etc...
Credits:
AICP Team (for the kernel base) :good:
Savoca (helps me a lot) :angel:
Dorimanx (helps me too) :highfive:
FranciscoFranco (some kernel tweaks)
RenderBroken (some kernel tweaks)
Downloads:
MEGA Mirror
Source
XDA:DevDB Information
STAX KERNEL, Kernel for the LG G2
Contributors
daniel.stuart14
Kernel Special Features: This kernel have all the stuff from AICP's kernel, and my modifications. Like sweep2sleep, lower min_brightness, better ondemand gov, etc.
Version Information
Status: Alpha
Current Beta Version: 1.0
Beta Release Date: 2014-11-24
Created 2014-11-25
Last Updated 2014-11-24
Click to expand...
Click to collapse
Upload on dropbox or some .mega not work with folder
Just a note, it'll only work on unofficial KK PA because houston's builds use his own sources. And looks nice! Might take for a spin one day when I get a new screen.
leos0000 said:
O yee thanks bro.work ****ing nice cool on d803
---------- Post added at 02:21 AM ---------- Previous post was at 02:20 AM ----------
Upload on dropbox or some .mega not work with folder
Click to expand...
Click to collapse
Never quote an op, ever.
Keep it up mate! everyone here for sure is happy right now for the new kernel you've contributed to our community :good:
tsunamical said:
Just a note, it'll only work on unofficial KK PA because houston's builds use his own sources. And looks nice! Might take for a spin one day when I get a new screen.
Click to expand...
Click to collapse
You're right! I change the OP. Thx!
1.1 is coming! With changes in the gpu driver & power driver. For a better battery/graphics.
thanks for the kernel mate !! good work
Thanks for your precious time and effort and most of all thank you for supporting F320!! Looking forward to test this out and a Lollipop kernel from you..Keep up the good work.
Does it work on stock 4.4?
no
kaedeyip said:
Does it work on stock 4.4?
Click to expand...
Click to collapse
the thread title says AOSP not stock
can you make F2FS Kernel too @daniel.stuart14
D802 user here!
@bart452 Patch
thanks in advance!
fLipz said:
can you make F2FS Kernel too @daniel.stuart14
D802 user here!
@bart452 Patch
thanks in advance!
Click to expand...
Click to collapse
I'm just doing some changes in GPU, and when I finish it, I'll start to port F2FS.
1.1 is coming.
Currently using this. I'll post battery stats sometime later, and I haven't had any crashes, reboots, or SoDs either.
Sent From Capsule Corp.
Hello
Does it works with SOKP rom ?
Thanks in advance
Envoyé de mon LG-D802 en utilisant Tapatalk
Keep getting "Folders not yet supported" error while trying to download... Never encountered this before so do you have another download link or know of a fix??? Thanks in advance and thank you for your contribution to our community!
undeadking said:
Keep getting "Folders not yet supported" error while trying to download... Never encountered this before so do you have another download link or know of a fix??? Thanks in advance and thank you for your contribution to our community!
Click to expand...
Click to collapse
Are you downloading from a PC or your phone?
Sent From Capsule Corp.
Guys, I'm 99% sure that v1.1 will come today.
I'll create a mirror in mediafire, too.
guys, I have a problem with LCD of my device. (black lines), and I'll send it to LG.
So, for now, I'll stop the updates.
daniel.stuart14 said:
guys, I have a problem with LCD of my device. (black lines), and I'll send it to LG.
So, for now, I'll stop the updates.
Click to expand...
Click to collapse
Check out the permanent screen damage thread in G2 General... Ive went through 3 G2's due to the issue- thermally governed TWRP dr87's or blastagator's 2.8.0.1/2.8.1.1 are mandatory with this device... Oh and DON'T SEND TO LG! Verizon swapped all of mine at the store- maybe give that a try before mailing it off...
undeadking said:
Check out the permanent screen damage thread in G2 General... Ive went through 3 G2's due to the issue- thermally governed TWRP dr87's or blastagator's 2.8.0.1/2.8.1.1 are mandatory with this device... Oh and DON'T SEND TO LG! Verizon swapped all of mine at the store- maybe give that a try before mailing it off...
Click to expand...
Click to collapse
Yeah, I was using the blastagator's 2.8.1.1.
Here in brazil, the LG take care about warranty, not the carrier.
But thx,
Mady's Xtended Kernel for OnePlus 5/T Unified
Standard Disclaimer:-
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this Kernel before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you.
*/
General Information:-
Code:
This is only kernel and not a ROM. Be sure to flash a ROM first and then the kernel to boot into system. Or otherwise don't come yelling that it didn't booted...:p We are good in helping only if you're good at reading and explaining, if not then please don't flash this.
Credits:-
Code:
@martinusbe
@Sultanxda
@ GZR Team
@ Devs from whom we have used the commits.
@ Users flashing & Testing this.
@ Lastly our Team Xtended (Yeah we too worked hard by sleeping 9-10 hours every night and even in days whenever got some free time)
@SuperDroidBond - I don't even know why I am in the credit list...;)
@simedrut - Why I'm in the credit list? :)
Features in Kernel:-
Code:
* / *
* Latest Upstream From GZR-Kernels.
* Block Unnecessary Wake-ups
* Default Boeffola Wake-locks Included
* Some normal inits.
* / *
Future Plans:-
Code:
* / *
* Wireguard.
* smartmax gov
* alucard gov
* other if any, we feel good to add.
* / *
Some Information:-
1) Battery/SOT ?
Ans:- This is contradictory thing so let the kernel settle and then check yourself and report back.
2) How frequent kernel gets updated ?
Ans:- It can be daily or weekly or hourly as well.......
3) Feature request ?
Ans:- Always Welcome. We will appreciate, if the request comes with proper commits and links.
4) What all ROM/s it's working ?
Ans:- ROMs working - Nitrogen OS, Z-unleashed, Cardinal Xtended (test 8.1 build), GZOSP & based ROMs. Others please do flash and let us know so that we can update the same in the list.
5) I am interested in testing ?
Ans:- Please join our Telegram Testing Group - Xtended Testing
Download Information:-
Mady's Xtended Kernel
Lastly, We love to have feedback related ethical improvements, feature improvements or something from which we can learn.
Code:
[B][U]Good Words:-[/U][/B]
Both Good & Bad Friends are important. Good friends will give you memories while Bad Friends will give lessons.
XDA:DevDB Information
Mady's Xtended Kernel, Kernel for the OnePlus 5
Contributors
simedrut, mady51, martinusbe
Source Code: https://github.com/mady51/kernel_oneplus_msm8998
Kernel Special Features: This is GZR-Kernel with all due permissions from GZR Team
Version Information
Status: Stable
Current Stable Version: Latest
Stable Release Date: 2018-03-18
Created 2018-03-19
Last Updated 2019-03-25
Reserved
Reserved
Unified ?
Something new to try
It's really pleasing to see that team is going on right direction, and thanks @mady51 brother to share your work.
Really great and appreciating..[emoji106]
This is for custom ROMs only, correct?
Veliion said:
This is for custom ROMs only, correct?
Click to expand...
Click to collapse
I'd assume so, all the supported ROMs in the OP are AOSP based.
Veliion said:
This is for custom ROMs only, correct?
Click to expand...
Click to collapse
Yes
@simedrut how about idle drain for you ?
mukesh22584 said:
@simedrut how about idle drain for you ?
Click to expand...
Click to collapse
2%/h... Very good here
simedrut said:
2%/h... Very good here
Click to expand...
Click to collapse
2% is bad bro. Check bbs and share me
X2 version is up!
Upstreamed to latest linux stable (4.4.123) and more improvements for battery life and perfomance.
DOWNLOAD KERNEL LINK
update time - MadKernel-Unified-OP5T-Pie-4.zip
changes -
kernel: time: reduce ntp wakeups
disable crc check
msm: kgsl: Increase worker thread priority
arm64: crypto: Improve target optimization flags & other flags for optimization
qcom-cpufreq: Use CLKFLAG_NO_RATE_CACHE
wl_blocker: add more wakelocks to the default block list
drivers/slimbus: Overclock slimbus
Optimized Console FrameBuffer for upto 70% increase in Performance
various - queue work on system_power_efficient_wq
msm: slimbus: some more tweaks and added new freqs
arm64: bpf: optimize JMP_CALL
mm: Decrease swappiness
Introducing KLapse - A kernel level livedisplay module v4.0
Interactive tweaks
CpuIdle tweaks
reduce wlan wakelock time even more
cpu-boost optimizatoins
thermal optimization
Improve stability & camera power consumption
Added AdrenoBoost (disabled by default)
disable RX Unicast wakelocks
lots of other tweaks and optimizations.
flash and enjoy
simedrut said:
2%/h... Very good here
Click to expand...
Click to collapse
Idle drain should be less than 1% unless you are playing music
Added to the OnePlus 5 Index Thread here.
update - MadKernel-Unified-Op5T-Pie-5.zip
changes -
Interactive tweaks for better battery without loss in smoothness
reduce some latency
thermal tweaks
Tripndroid tweaks
fixed ssusb wakelock issue (mostly) which keeping device awake when plug/unplug
msm8998-gpu.dtsi: Enable NAP state
add no-wakeup-src-in-hostmode
-thanks
mady51 said:
changes -
fixed ssusb wakelock issue (mostly) which keeping device awake when plug/unplug
Click to expand...
Click to collapse
@sleepwalking0593 Maybe try this kernel (the above is from the latest changelog)?
shadowstep said:
@sleepwalking0593 Maybe try this kernel (the above is from the latest changelog)?
Click to expand...
Click to collapse
But i didn't get this wakelocks on derpfest. I have uploaded my screenshots in derpfest group. I'm not defaming or lying about anything. I have shifted back to oos now because of bad idle drain. I might flash it if i use custom ROM.
mady51 said:
update - MadKernel-Unified-Op5T-Pie-5.zip
changes -
Interactive tweaks for better battery without loss in smoothness
reduce some latency
thermal tweaks
Tripndroid tweaks
fixed ssusb wakelock issue (mostly) which keeping device awake when plug/unplug
msm8998-gpu.dtsi: Enable NAP state
add no-wakeup-src-in-hostmode
-thanks
Click to expand...
Click to collapse
Can you link me the commit that fixed ssusb wakelock issue,i can link it to Franco so that he can fix in his kernel too. Thanks. Also Sian for codename phoenix ROM.
Introduction:
Affinity Kernel is a custom kernel based on the latest Stable Linux 4.4 release from kernel.org.
This kernel is developed with performance and great battery life in mind offering some goodies cherry-picked from other popular kernels such as Flash Kernel, ElementalX, blu_spark, Boeffla Kernel, Sultan Kernel and Franco Kernel.
The kernel is always up to date with mainline linux kernel and is regulary updated with the latest fixes.
The goal is to provide a butter smooth experience, simmilar to what you get with the latest Pixel devices.
Affinity Kernel is based on the official kernel source released by OnePlus.
Code:
/*
* Your warranty is not void (Thank you OnePlus!).
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
Upstreamed to the latest Linux Stable 4.4.x
Upstreamed to the latest CAF tag LA.UM.6.4.r1-11500-8x98.0 & LA.UM.7.4.r1-04800-8x98.0
Tunable with Kernel Adiutor and others
Additional CPU gorvernors
Sound Control
Adreno Idler by @arter97
Full WireGuard implementation
Sweep2Sleep gesture
Fast charging on USB
FS fsync toggle (enabled by default)
Additional IO schedulers (Maple, FIOPS, SIO, ZEN)
Qualcomm MDSS v2 (sRGB + KCAL)
dm(avb)-verity disabled
Faster app cold-launch
IO Tuning
Optimized with oFast and O3
Westwood TCP algorithm as default
Full Treble compatibility with Treble related fixes
Individual Input Boost frequency for each cluster
Disabled the BCL battery driver
Backlight Dimmer by @flar2
Boeffla Wakelock blocker v1.1.0
CDROM emulation
init.d support
ARM target optimizations
Passes SafetyNet check
Crypto Routines optimizations
High Brightness mode
Adreno driver improvements
EAS
Dynamic SchedTune Boost v3
KLAPSE Driver
Decreased swappiness
Installation:
Before you install the kernel, make sure you have
a backup of boot partition in case something goes wrong!
If you are coming from stock kernel:
Reboot into TWRP
Flash the Affinity Kernel.zip
Reboot
If you are coming from another custom kernel:
Reboot into TWRP
Dirty flash your rom or restore boot backup if you have any
Reboot recovery
Flash the Affinity Kernel.zip
Reboot
Updating:
Just flash the latest Affinity Kernel build over the previous one
Downloads:
{Mod edit}
On ROMs like Dirty Unicorns, WLAN won't work because the wlan module is required
to load on device initcall rather than late initcall like other ROMs do. There's a workaround for it but
it breaks WLAN on all ROMs that have the module built inline or the CAF way
{Mod edit}
Thanks to:
@joshuous for his EAS commits and Dynamic Sched Boost
@osm0sis for his AnyKernel2 installer
@nathanchance for his android-linux-stable project and helping me
@Lord Boeffla for Boeffla Wakelock Blocker and LED control
@Sultanxda for his fixes and other stuff
@eng.stk for his tweaks
@flar2 for his Sweep2Sleep gesture driver
@tanish2k09 for KLAPSE Driver
And all those folks contributing to Linux Kernel
XDA:DevDB Information
Affinity Kernel, Kernel for the OnePlus 5
Contributors
LinuxUser0227
Source Code: https://github.com/hejsekvojtech/Affinity-OnePlus5
Kernel Special Features: Fast, Battery friendly, Stable, Up to date
Version Information
Status: Stable
Current Stable Version: r24
Stable Release Date: 2018-09-27
Created 2018-09-27
Last Updated 2019-04-06
Compatible with Magisk? If so dirty flash followed by Magisk fine? ?
New Kernel for OOS, amazing, i try this
thx a lot
Nice that you asked me whether you could use my mod... And not even thank me....
RogerF81 said:
Nice that you asked me whether you could use my mod... And not even thank me....
Click to expand...
Click to collapse
Sorry, I forgot. The thread will be updated
Im_Mattgame said:
Compatible with Magisk? If so dirty flash followed by Magisk fine?
Click to expand...
Click to collapse
Yes, you can flash Magisk after flashing Affinity Kernel
Nice I'm going to test it.
Added to the OnePlus 5 Index Thread here.
Affinity Kernel r2 is up!
This build includes just some small changes, mainly new IO schedulers and governors
Here's the changelog:
Enabled all TCP congestion algorithms (westwood is still default)
Enabled full support for Xbox gamepad
Added new IO schedulers:
SIO
ZEN
FIOPS
Added new governor - blu_active
Set Maple IO scheduler as default
Use the same input_boost values as Pixel 2
You can get it HERE
Dash charge doesn't work on r1.
obol2 said:
Dash charge doesn't work on r1.
Click to expand...
Click to collapse
Works for me on both r1 and r2
obol2 said:
Dash charge doesn't work on r1.
Click to expand...
Click to collapse
everything works great!
Khaos said:
Yes, you can flash Magisk after flashing Affinity Kernel
Click to expand...
Click to collapse
So if Magisk is already installed, do you have to flash magisk again after flashing kernel or do you have to uninstall/reinstall after Affinity?
Thanks
bigjailerman said:
So if Magisk is already installed, do you have to flash magisk again after flashing kernel or do you have to uninstall/reinstall after Affinity?
Thanks
Click to expand...
Click to collapse
Nope, you don't have to reflash Magisk after installing Affinity
Thanks for fast reply!!
new kernel! i try it
Affinity Kernel r3 is up!
Here's the changelog:
Upstreamed to Linux Kernel 4.4.159
Added Backlight Dimmer
You can get it HERE
with r3 my phone reboot alone
gege0202 said:
with r3 my phone reboot alone
Click to expand...
Click to collapse
What do you mean ? Does it not boot ? Or does it go in a loop ? Does it give you a blue led black screen ?
Please be more specific
Thanks for your work. I'm using this kernel with Oneplus 5T OB17 and works great.
THUNDERSTORM CAF KERNEL
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Tested on both AOSP/LineageOS (Oreo & Pie) treble based ROMs
Maybe work on Oreo and Pie stock AndroidOne ROMs
* Have a WonderFull Battery & Performance *
Features:
Pie CAF & Prima Tag: LA.UM.7.5.r1-04100-8x96.0
Linux Upstream: 3.18.135
KCAL color control
exFAT Support (sdfatfs)
NTFS readonly support
Wireguard VPN Support
Gaming performance (v1): lowlatency / 1000Hz
CPU governors: darkness, zzmoove, interactive, performance, conservative, userspace, powerspace, ondemand (default)
IO schedulers: noop, deadline, bfq, zen, maple, cfq (default)
TCP congestion algorithms: cubic, reno, westwood (default)
Fsync on/off support
IP Tables TTL support
Adreno Idler included
Sound gain control
Installer uncluded fix for Wi-Fi SELinux permission
Download:
ThunderStorm-CAF-daisy-zero-20190302-1022_v2.zip (16.37 MB)
MD5: 9789 e3e543f75c95e8e77f77e696 6153
Installations:
Backup boot.img if you want to go back
Backup /system/lib/modules and /vendor/lib/modules folders
Flash Zip file with any TWRP recovery, reboot and enjoy
Notice: If you have Magisk with modules installed maybe you get bootloop. Try reinstall Magisk after kernel. If not help, burn Magisk on fire!
Right way: flash stock boot.img, then custom kernel, then other stuff like twrp and magisk
Issues:
- dt2w
- missed sound in call on the Pie base
XDA:DevDB Information
ThunderStorm CAF Kernel for Xiaomi Mi A2 Lite "daisy"
Contributors
RevanthTolety (owner)
Source Code of ThunderStorm kernel:
https://github.com/Revanth/kernel_xiaomi_msm8953/commits/lineage-16.0-thunder
Kernel config for "daisy"
https://github.com/eremitein/xiaomi_daisy_kernel_config_thunderstorm
NOTICE: This kernel just compiled by me with my config. All respect going to RevanthTolety, big thanks him for efforts! When he tests and releases his kernel for "daisy" device, this my thread will be closed by me, because it will not be necessary. Now users have the opportunity to evaluate this kernel and share their wishes and comments on this thread. I hope it will be the benefit of all
Kernel Special Features:
Version Information
Status v2: Stable
Release Date: 2019-02-19 (UTC +5)
Created: 2019-02-19
Last Updated: 2019-03-02
.
//reserved
Screenshots from settings
Nice you got zzmove good work!
let's tes this one! i haven't good experience on GENOME CAF not very stable ... yet
Thread opened.
Lupin The Third
Enjoy!
Lupin The Third
Bokoko006 said:
Nice you got zzmove good work!
Click to expand...
Click to collapse
say thanks to RevanthTolety
i'm just modify config for daisy and compiled the kernel
Lupin The Third said:
Thread opened.
Lupin The Third
Click to expand...
Click to collapse
Why is thread closed?
Bokoko006 said:
Why is thread closed?
Click to expand...
Click to collapse
Maintenance. But, it's opened now. So...
No sound in call 10.0.3.0 pie
Unpacking ramdisk failed. Aborting
TheDoop said:
Unpacking ramdisk failed. Aborting
Click to expand...
Click to collapse
I had this once, when I installed a custom kernel over a custom kernel both with anykernel installer. Try to flash stock first via fastboot!
istall method updated in OP
Voodoojonny said:
I had this once, when I installed a custom kernel over a custom kernel both with anykernel installer. Try to flash stock first via fastboot!
Click to expand...
Click to collapse
Thanks. now installing
Overunity01 said:
No sound in call 10.0.3.0 pie
Click to expand...
Click to collapse
+1
Can any one provide antutu score
Medo22 said:
Can any one provide antutu score
Click to expand...
Click to collapse
not very good
Overunity01 said:
No sound in call 10.0.3.0 pie
Click to expand...
Click to collapse
Voodoojonny said:
+1
Click to expand...
Click to collapse
it's a strange, for me all work
may you send me logs?
eremitein said:
it's a strange, for me all work
may you send me logs?
Click to expand...
Click to collapse
I will do later - perhaps this evening. Since I needed my phone I directly went back to stock...