Moto G5 XT1672 FlashBlank - Moto G5 Questions & Answers

Hello everyone, I have a Moto G5 (XT1672) and I unlocked the bootloader, and when I went to upgrade the android, on the rainbow screen of installing the update, it simply hung up and did not call anymore, and when I connect it on charger, it simply flashes the white LED ....
I installed the stockrom.net rom stock, the version that was on the phone, which was from android 7.0.
What can this be????
Heeeeeeeeeeeeeeeeeeeeeeeelp!!!!

Lordstark73 said:
Hello everyone, I have a Moto G5 (XT1672) and I unlocked the bootloader, and when I went to upgrade the android, on the rainbow screen of installing the update, it simply hung up and did not call anymore, and when I connect it on charger, it simply flashes the white LED ....
I installed the stockrom.net rom stock, the version that was on the phone, which was from android 7.0.
What can this be????
Heeeeeeeeeeeeeeeeeeeeeeeelp!!!!
Click to expand...
Click to collapse
Today I had the same problem. Please, can anyone help us?
I have tried every button combinations about 20s - 180s. Nothing happen..... When connect it to the computer nothing happens to. No driver is detected. Moto is just dead. Only blink the white led when connected to the wall or computer.

Lordstark73 said:
Hello everyone, I have a Moto G5 (XT1672) and I unlocked the bootloader, and when I went to upgrade the android, on the rainbow screen of installing the update, it simply hung up and did not call anymore, and when I connect it on charger, it simply flashes the white LED ....
I installed the stockrom.net rom stock, the version that was on the phone, which was from android 7.0.
What can this be????
Heeeeeeeeeeeeeeeeeeeeeeeelp!!!!
Click to expand...
Click to collapse
Hello, I'm having the same problem here in Brazil, I read in some Google+ problems that replacing the main board is the only alternative.
But I watched a video of the Moto G4 where Bob Tutoriais (YouTube) can access it through the Qualcomm driver. Could you try to watch and know if you have any similar method? Thank you for your attention.

The problem is that when you connect the device to computer, nothing happens... The motherboard seems not responding... I contacted Motorola today and tomorrow I'll send the device to maintenance.

Has anyone got it?

Sorry, your phone just died. There's no recovery.
Hardbrick. It corrupted the Bootloader partition, so it doesn't exist anymore. The only solution at this time is to replace the motherboard by an new one, in the future we can do Blank Flash, but Motorola did not make these files available.
---------- Post added at 05:11 AM ---------- Previous post was at 05:06 AM ----------
https://forum.xda-developers.com/g5/how-to/urgent-dont-update-stock-rom-unlocked-t3691079

Complicates even more now, I do not know how much a plate is for him ...

Help
I need some urgent help !!!
My Moto G5XT1672 came into hardbrick after an update via OTA. I can not find anything to fix it! I saw in some tutorials of other models a formula using a blankflash, but I can not find it for my model !!! another way is using the medusa box pro, but in my city no assistance has this box !!! help me please.......

Luzini said:
I need some urgent help !!!
My Moto G5XT1672 came into hardbrick after an update via OTA. I can not find anything to fix it! I saw in some tutorials of other models a formula using a blankflash, but I can not find it for my model !!! another way is using the medusa box pro, but in my city no assistance has this box !!! help me please.......
Click to expand...
Click to collapse
Please stop spamming xda threads with the same question - its against the xda rules to which you agreed to when you signed up
There are currently no known working blank flash files for this device
You can try the mmcblk0 method but if it doesn't work for you there's nothing you can do other than pay for a motherboard replacement or a repair shop with tools to re-image the phone

TheFixItMan said:
Please stop spamming xda threads with the same question - its against the xda rules to which you agreed to when you signed up
There are currently no known working blank flash files for this device
You can try the mmcblk0 method but if it doesn't work for you there's nothing you can do other than pay for a motherboard replacement or a repair shop with tools to re-image the phone
Click to expand...
Click to collapse
If you want this is Cedric blankflash

h3sh11 said:
If you want this is Cedric blankflash
Click to expand...
Click to collapse
Where did you get this from
If it was from vache site it's already confirmed not working
If its the one posted in general section - again confirmed not working

h3sh11 said:
If you want this is Cedric blankflash
Click to expand...
Click to collapse
Unknown or damaged file
TheFixItMan said:
Where did you get this from
If it was from vache site it's already confirmed not working
If its the one posted in general section - again confirmed not working
Click to expand...
Click to collapse
+1 :good:

TheFixItMan said:
Where did you get this from
If it was from vache site it's already confirmed not working
If its the one posted in general section - again confirmed not working
Click to expand...
Click to collapse
takoa said:
Unknown or damaged file
+1 :good:
Click to expand...
Click to collapse
Yes It's the Vache blankflash, I tried last night and it does not even work, we can only wait for someone to start working on the mmcblk0 file :good:

Lordstark73 said:
Hello everyone, I have a Moto G5 (XT1672) and I unlocked the bootloader, and when I went to upgrade the android, on the rainbow screen of installing the update, it simply hung up and did not call anymore, and when I connect it on charger, it simply flashes the white LED ....
I installed the stockrom.net rom stock, the version that was on the phone, which was from android 7.0.
What can this be????
Heeeeeeeeeeeeeeeeeeeeeeeelp!!!!
Click to expand...
Click to collapse
guiasaph said:
Today I had the same problem. Please, can anyone help us?
I have tried every button combinations about 20s - 180s. Nothing happen..... When connect it to the computer nothing happens to. No driver is detected. Moto is just dead. Only blink the white led when connected to the wall or computer.
Click to expand...
Click to collapse
Derovile said:
Hello, I'm having the same problem here in Brazil, I read in some Google+ problems that replacing the main board is the only alternative.
But I watched a video of the Moto G4 where Bob Tutoriais (YouTube) can access it through the Qualcomm driver. Could you try to watch and know if you have any similar method? Thank you for your attention.
Click to expand...
Click to collapse
Solution is here
click here to goto my unbrick thread

Related

[SamSung Note 4 - SM-N910A] HardBrick - QHSUSB_BULK help

OEM battery was replaced with new batteries bought off amazon. After the new update, suddenly it started randomly rebooting on me. and next thing it knew, if would show me a Samsung Logo screen and be stuck on it.
I saw some suggestion and I did the remove battery and held the power button and down vol. it reboots.. and every it auto restart and goes to the downloading screen... i just remove the batter and restart the process.
I accidentally on my reboot select the boot from bootloader, and from there it Hardbrick. It no longer turns on, as good as dead, but when I plugged into the PC... I hear 3 beeps... and QHSUSB_BULK driver not found.
I bought a jig, and see if it would help me go into the Bootup Mode, but it was still unresponsive
I was hoping if anyone is able to offer me some guidance
we are able to unbrick it
......if we had someone to help use with the development by just spending the extra few minutes on helping us
What kind of help do you need?
I saw post about Jtag service saying that they cab fix it, should I give them a try?
I have a device that did the same exact thing. Started acted funny, then just hardbricked on a battery pull. Same error message on computer when plugged in, despite locating correct drivers, etc. I am really upset because I've lost a lot of pictures and videos of my little girl. I wrote to a jtag repair person & they felt jtag would not help. And of course I've done all the usual stuff, new battery, all the button combos, etc. It's deader that a door nail, no charging light, vibrations, nothing. I've not dropped it, gotten it wet, nothing.....it just died. And a few few days short of my upgrade, too! Go figure. Anyhow, if ANYONE can PLEASE offer any help, that would be awesome. Even if just as much for me to recover my pics from the emc.
XenophobiaDX said:
What kind of help do you need?
I saw post about Jtag service saying that they cab fix it, should I give them a try?
Click to expand...
Click to collapse
we all know about JTAG
but we want a person who owns an AT&T Samsung Galaxy Note 4 who is still in Android Lollipop
Because if we found a person on it
we can create an unbrick image to boot it
alexanderdab said:
we all know about jtag
but we want a person who owns an at&t samsung galaxy note 4 who is still in android lollipop
because if we found a person on it
we can create an unbrick image to boot it
Click to expand...
Click to collapse
right here. Just dont know how
viewsfromthepi said:
right here. Just dont know how
Click to expand...
Click to collapse
what version of Android are you on?
AlexanderDAB said:
what version of Android are you on?
Click to expand...
Click to collapse
Lollipop
viewsfromthepi said:
Lollipop
Click to expand...
Click to collapse
what is your Baseband version
alexanderdab said:
what is your baseband version
Click to expand...
Click to collapse
n910aucu2doi3
viewsfromthepi said:
n910aucu2doi3
Click to expand...
Click to collapse
can you temp root with Kingroot
AlexanderDAB said:
can you temp root with Kingroot
Click to expand...
Click to collapse
Yes
viewsfromthepi said:
Yes
Click to expand...
Click to collapse
If you have a computer, and if you can root with kingroot
Use the batch file on a Windows based computer
And please create the unbrick image
Please, for everyone who has a bricked AT&T Note 4
And link me to the unbrick image
AlexanderDAB said:
If you have a computer, and if you can root with kingroot
Use the batch file on a Windows based computer
And please create the unbrick image
Please, for everyone who has a bricked AT&T Note 4
And link me to the unbrick image
Click to expand...
Click to collapse
Question. Will my information be copied?
viewsfromthepi said:
Question. Will my information be copied?
Click to expand...
Click to collapse
It will not, it only copies the Bootloader mechanisms into an image
AlexanderDAB said:
It will not, it only copies the Bootloader mechanisms into an image
Click to expand...
Click to collapse
Ok. Will upload when I have a chance
viewsfromthepi said:
Ok. Will upload when I have a chance
Click to expand...
Click to collapse
THANK YOU
I NEED TO UNBRICK THE PHONE ;u;
I hope my work can help the community can help to root this phone
Its been 2 Years, 3 Months and 20 Days since this phone came out
viewsfromthepi said:
I hope my work can help the community can help to root this phone
Its been 2 Years, 3 Months and 20 Days since this phone came out
Click to expand...
Click to collapse
Yes it has
The "unrootable unlockable" Verizon Note 4 has a bootloader unlock and root, twrp, customs roms and kernel
meaning anything is possible
AlexanderDAB said:
Yes it has
The "unrootable unlockable" Verizon Note 4 has a bootloader unlock and root, twrp, customs roms and kernel
meaning anything is possible
Click to expand...
Click to collapse
Kingroot is too bugy it reboots. Any alternatives?

Help [hardbricked device] urgent need of help asap

Ok so i was just rooting when my phone decides to die during so commands in adb. :crying:
Now i cant turn on the phone or boot into fastboot or bootloader. everytime i plug it in the charging light just flashes. Also my computer recognises the device as qualcomm hs-usb qdloader 9008 . ive read around the internet and ive found two methods. blank flash and qfil. issue is those tutorials were made for the moto g5 plus. I have searched around the internet and im beginnign to lose hope now. Can someone tell me how to fix this or give me the right blankflash version.
much appreciated
Im sorry that i cant post a useful reply for your problem that you cant even boot into fastboot / hardbricked phone.
The following link is for all those that are stuck in fastboot mode / boot loop.
This post says its for indian version, but i have EU version (1676) and it worked for me to get back my phone as it was when bought:
https://forum.xda-developers.com/g5-plus/how-to/lock-bootloader-moto-g5-plus-indian-t3638835
Kim Il said:
Im sorry that i cant post a useful reply for your problem that you cant even boot into fastboot / hardbricked phone.
The following link is for all those that are stuck in fastboot mode / boot loop.
This post says its for indian version, but i have EU version (1676) and it worked for me to get back my phone as it was when bought:
https://forum.xda-developers.com/g5-plus/how-to/lock-bootloader-moto-g5-plus-indian-t3638835
Click to expand...
Click to collapse
Thanks but unfortunately still cant access bootloader or fastboot to do so :/
rajibahmed said:
Thanks but unfortunately still cant access bootloader or fastboot to do so :/
Click to expand...
Click to collapse
if you cant access bootloader take it to a repair shop - you need specialist software and hardware to re-image your phone
how on earth did you do that - you do know to root this device its just a simple zip flashing in recovery mode - no fancy commands or anything required once you have unlocked the bootloader via the very easy to follow guide on the moto unlock bootloader website
TheFixItMan said:
if you cant access bootloader take it to a repair shop - you need specialist software and hardware to re-image your phone
how on earth did you do that - you do know to root this device its just a simple zip flashing in recovery mode - no fancy commands or anything required once you have unlocked the bootloader via the very easy to follow guide on the moto unlock bootloader website
Click to expand...
Click to collapse
Its a long story. Basically i rooted it successfully but one of my favourite apps (snapchat) wasnt letting me sign in because i was rooted. I tried everything to mkae it work. Eventually i tried to unroot sign in and reroot to make it work. At that moment something went terribly wrong idk what but now im hardbricked.
rajibahmed said:
Its a long story. Basically i rooted it successfully but one of my favourite apps (snapchat) wasnt letting me sign in because i was rooted. I tried everything to mkae it work. Eventually i tried to unroot sign in and reroot to make it work. At that moment something went terribly wrong idk what but now im hardbricked.
Click to expand...
Click to collapse
If you are using LineageOS all you had to do was just go into dev settings switch root to disable & restart the phone
If you used magisk just use the magisk uninstaller then reflash the kernel
I don't understand why you touched the bootloader partition
TheFixItMan said:
If you are using LineageOS all you had to do was just go into dev settings switch root to disable & restart the phone
If you used magisk just use the magisk uninstaller then reflash the kernel
I don't understand why you touched the bootloader partition
Click to expand...
Click to collapse
I dunno y either. Luckily I had insurance on it so now I got a new device
Although even though I'm sorted it think we need a way to fix hardbricked devices because the Moto g5plus and g4s have fixes but I haven't found any that work for Cedric devices
rajibahmed said:
Although even though I'm sorted it think we need a way to fix hardbricked devices because the Moto g5plus and g4s have fixes but I haven't found any that work for Cedric devices
Click to expand...
Click to collapse
How did u fix
infixremix said:
How did u fix
Click to expand...
Click to collapse
I had insurance so I just replaced the whole device
rajibahmed said:
I had insurance so I just replaced the whole device
Click to expand...
Click to collapse
Wtf insurance covers it ?
infixremix said:
Wtf insurance covers it ?
Click to expand...
Click to collapse
Ish. I had Argos insurance and they basically take any dead device. Plus they don't check if it's been tampered with . I just said it didn't turn on
rajibahmed said:
Ish. I had Argos insurance and they basically take any dead device. Plus they don't check if it's been tampered with . I just said it didn't turn on
Click to expand...
Click to collapse
Motorola warranty takes hardbricked dvices with locked bootlloadder?
CypherPotato said:
Motorola warranty takes hardbricked dvices with locked bootlloadder?
Click to expand...
Click to collapse
How the hell did u hradbrick ur device without an unlocked bootloader. And idk I think that after you start tampering with the os and system it kills ur warranty. You'll have to chat with someone at Motorola

Hard Bricked, only white light blinks while connecting to PC

First unlocked bootloader,flashed TWRP, was flashing RR,,,>>Got error
Second Again Flashed Stock ROM, Flashed OTA.zip via adb sideload,phone rebooted>>Phone got dead
Only white light blinks while connecting to PC.
Reached Service centre, they saying warranty voided pay 75% of your phone(INR 16999) to get new motherboard replaced.
Saw many threads from XDA mai forum,tried too, but was unsucessful
Please Help
vaibhavxol said:
First unlocked bootloader,flashed TWRP, was flashing RR,,,>>Got error
Second Again Flashed Stock ROM, Flashed OTA.zip via adb sideload,phone rebooted>>Phone got dead
Only white light blinks while connecting to PC.
Reached Service centre, they saying warranty voided pay 75% of your phone(INR 16999) to get new motherboard replaced.
Saw many threads from XDA mai forum,tried too, but was unsucessful
Please Help
Click to expand...
Click to collapse
Where did you go wrong?
Did you flash an older stock ROM than which was installed in your phone before you unlocked BL?
Was the RR file completely downloaded? What error did you get while flashing RR?
vaibhavxol said:
First unlocked bootloader,flashed TWRP, was flashing RR,,,>>Got error
Second Again Flashed Stock ROM, Flashed OTA.zip via adb sideload,phone rebooted>>Phone got dead
Only white light blinks while connecting to PC.
Reached Service centre, they saying warranty voided pay 75% of your phone(INR 16999) to get new motherboard replaced.
Saw many threads from XDA mai forum,tried too, but was unsucessful
Please Help
Click to expand...
Click to collapse
Why did you flash ota via adb sideload?
Very bad idea - why? Because I bet that ota wasn't meant for your firmware version
Only ever update your phone through the about phone section on a totally unmodified stock rom with stock recovery
Sorry but you will have to take it to a repair shop to either get it reimaged or get a new board that has the firmware already on it
vaibhavxol said:
First unlocked bootloader,flashed TWRP, was flashing RR,,,>>Got error
Second Again Flashed Stock ROM, Flashed OTA.zip via adb sideload,phone rebooted>>Phone got dead
Only white light blinks while connecting to PC.
Reached Service centre, they saying warranty voided pay 75% of your phone(INR 16999) to get new motherboard replaced.
Saw many threads from XDA mai forum,tried too, but was unsucessful
Please Help
Click to expand...
Click to collapse
Just recovered from the same situation lol [emoji23].... You've to flash Albus blanflash ... There's guide on the necessary steps on another hard brick recovery thread on XDA
Sent from my XT1686 using Tapatalk
Repaired
sandy108 said:
Just recovered from the same situation lol [emoji23].... You've to flash Albus blanflash ... There's guide on the necessary steps on another hard brick recovery thread on XDA
Sent from my XT1686 using Tapatalk
Click to expand...
Click to collapse
Now can i get back to stock rom or default bootloader ?
And pplease tell which rom you currently using ?
psychopac said:
Where did you go wrong?
Did you flash an older stock ROM than which was installed in your phone before you unlocked BL?
Was the RR file completely downloaded? What error did you get while flashing RR?
Click to expand...
Click to collapse
I repaird it, have albus bootloader in it
RIP Moto G5's Bootloader Partition
This happened to me too and the only fix was the Warranty replacing the entire Motherboard.
U can try Qualcomm mode (qfil) or blank flash but motorola doens't have released that files (and never will)
CypherPotato said:
RIP Moto G5's Bootloader Partition
This happened to me too and the only fix was the Warranty replacing the entire Motherboard.
U can try Qualcomm mode (qfil) or blank flash but motorola doens't have released that files (and never will)
Click to expand...
Click to collapse
So how much did replacing it cost?
sandy108 said:
So how much did replacing it cost?
Click to expand...
Click to collapse
0,00 $
Warranty covered it
It's easy, only say that u don't known what happened and (wtf is an bootloader?)
CypherPotato said:
0,00 $
Warranty covered it
It's easy, only say that u don't known what happened and (wtf is an bootloader?)
Click to expand...
Click to collapse
and how vaibhavxol unbricked?
Ellcid01 said:
and how vaibhavxol unbricked?
Click to expand...
Click to collapse
replacing the entire motherboard.
@CypherPotato You seriously achieved that? They didn't check for BL unlock status?
I just bricked mine, still uncertain what happened, left it doing an update (OTA) with a 30-35% battery... dunno if the battery ran out during the update thus bricking it or the update with the unlocked BL did it.
Same situation as described, no response while connected to the PC only a blinking led.
Checking for battery drain issues (also present in the G series) by letting it charge for a while.
But commom, what Moto have in their heads, replacing the whole motherboard seems quite dumb, releasing the files can't be that hard. Loved my old Nexus 5, hardbricked it like 3 times and didn't take 1 hour to find how to undo it.
Nich_F said:
@CypherPotato You seriously achieved that? They didn't check for BL unlock status?
I just bricked mine, still uncertain what happened, left it doing an update (OTA) with a 30-35% battery... dunno if the battery ran out during the update thus bricking it or the update with the unlocked BL did it.
Same situation as described, no response while connected to the PC only a blinking led.
Checking for battery drain issues (also present in the G series) by letting it charge for a while.
But commom, what Moto have in their heads, replacing the whole motherboard seems quite dumb, releasing the files can't be that hard. Loved my old Nexus 5, hardbricked it like 3 times and didn't take 1 hour to find how to undo it.
Click to expand...
Click to collapse
Yeah... Motorola sucks until don't released Osprey (Moto G 2015) blankflash files, since the bootloader is locked for an only and one shipped ROM you cannot update in stock rom anymore, and I don't known the risks of re-locking the bootloader inside an non-shipped stock rom. The best you can do is create an system-dump backup before flashing new roms.
Unlocking the bootloader probally will break all device warranties, because you don't will able to flash another rom anymore.
The unique and unknown solution is reflashing the entire device's memory, that we will need to use the Qualcomm's blank flash files and Cedric blank flash files to rewrite the entire internal memory.
The flashing LED only indicates the device failed to start, but he still alive.
---------- Post added at 09:37 PM ---------- Previous post was at 09:34 PM ----------
I found this tutorial in the internet for fixing an Moto G4 Plus hardbrick, maybe it's possible to Moto G5 too.
http://moto-g4-plus-com-hardbrick-resolvido.webnode.com/passo-a-passo/
The link is in Portuguese, but u can normally translate it.

LG G4 815 problem

hello guys
i bought a new lg g4 for my girl
i was surprised because it can't upgrade to android marshmallow via phone
i decide to update it via LG up
installation take place and when it get to 100% the phone shutdown
but screen was black there is only vibration, blue led and the sound of volume up and down when pressed
LG up still recognise the phone version
but when i want to reupdate it tells me that the version is wrong (i used the same as the first one)
i tried many versions but same result
please guys help me to get back the phone it's a real loss for me
thanks
mini-mario said:
hello guys
i bought a new lg g4 for my girl
i was surprised because it can't upgrade to android marshmallow via phone
i decide to update it via LG up
installation take place and when it get to 100% the phone shutdown
but screen was black there is only vibration, blue led and the sound of volume up and down when pressed
LG up still recognise the phone version
but when i want to reupdate it tells me that the version is wrong (i used the same as the first one)
i tried many versions but same result
please guys help me to get back the phone it's a real loss for me
thanks
Click to expand...
Click to collapse
https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
Also spend some time searching how things work when flashing etc...
mini-mario said:
hello guys
i bought a new lg g4 for my girl
i was surprised because it can't upgrade to android marshmallow via phone
i decide to update it via LG up
installation take place and when it get to 100% the phone shutdown
but screen was black there is only vibration, blue led and the sound of volume up and down when pressed
LG up still recognise the phone version
but when i want to reupdate it tells me that the version is wrong (i used the same as the first one)
i tried many versions but same result
please guys help me to get back the phone it's a real loss for me
thanks
Click to expand...
Click to collapse
What version from Where did you Use?
uweork said:
What version from Where did you Use?
Click to expand...
Click to collapse
lollipop v10
RuedasLocas said:
https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
Also spend some time searching how things work when flashing etc...
Click to expand...
Click to collapse
thanks sir but i think it talks about normal flashing not my bricked phone
mini-mario said:
thanks sir but i think it talks about normal flashing not my bricked phone
Click to expand...
Click to collapse
Many times a phone becomes a brick because the tutorial "how to flash" was underestimated, people read them too fast, download any file, install everything randomly, everything very fast.... and later, oh... I ruined my phone!
Not saying that was your case, but it won't hurt you if you take a look again to the tutorials, and others fails and solutions.
Good luck!
mini-mario said:
lollipop v10
Click to expand...
Click to collapse
And what MM Version?
From which source?
Some more information about the way you bricked your phone
uweork said:
And what MM Version?
From which source?
Some more information about the way you bricked your phone
Click to expand...
Click to collapse
thanks guys for ur concern
after few trys i get to the download mode
please if there is a sure guide to process
thanks
mini-mario said:
thanks guys for ur concern
after few trys i get to the download mode
please if there is a sure guide to process
thanks
Click to expand...
Click to collapse
it was lg h815 v10 lollipop
mini-mario said:
it was lg h815 v10 lollipop
Click to expand...
Click to collapse
try this version
https://forum.xda-developers.com/showpost.php?p=73642302
Hi guys, I have prblem with rear camera in my lg g 4 . I chenged it with a new, but the prblem persit. Ftocmare appa crashes and I tried to restore it in anyway possible but nothing. Before go to retailer I would ask you I f you ha ve some hit and and shere our experience.
Thank You
K

XT1789-05 Verizon Rom Problem!!!

Hi and thanks for helping me,
I installed Verizon rom on my device, after that it's stuck in the welcome screen
Please wait, this may take a few minutes
I locked the bootloader, I thought it will help, but still stuck
now I can't unlock bootloader and I can't enter to Android OS
please help me how can fix this issue
thanks a lot
here is video
this is stuck over 30 min
http://ahmn.co/Upload/IMG_0161.MOV
I did reset factory from the recovery, I removed sim card, insert sim card, reboot, shutdown, safe mode, nothing changed
I can't flash new firmware because the device is: flashing_locked
I need help please
Codename for Verizon was XT1789-01. You need to give correct information.
mr_5kool said:
Codename for Verizon was XT1789-01. You need to give correct information.
Click to expand...
Click to collapse
My Phone Hardware is XT1789-05 and I loaded XT1789-01 Software, because that I have problem
If tell me how can skip android initial setup in Android 8 Wizard, problem will solve
It's weird.
AHMN48 said:
My Phone Hardware is XT1789-05 and I loaded XT1789-01 Software, because that I have problem
If tell me how can skip android initial setup in Android 8 Wizard, problem will solve
Click to expand...
Click to collapse
https://youtu.be/CxM5IP6bsgQ
sd_shadow said:
https://youtu.be/CxM5IP6bsgQ
Click to expand...
Click to collapse
Dear it's not about FPR, check the video again
I stuck at first page, I can't go further
http://ahmn.co/Upload/IMG_0161.MOV
AHMN48 said:
Dear it's not about FPR, check the video again
I stuck at first page, I can't go further
http://ahmn.co/Upload/IMG_0161.MOV
Click to expand...
Click to collapse
From what I can tell the XT1789-05 is a dual-sim and the XT1789-01 is a single-sim device.
I suspect that is the problem, or it just didn't flash correctly.
Either way locking the bootloader should only be done if firmware is stock unrooted and working correctly.
My only suggestion is trying the rescue option in.
MOTO Smart Assistant
Update your Moto with (Lenovo) MOTO Smart Assistant (PC)
Sent from my Rockchip RK3288 Chromebook using XDA Labs
sd_shadow said:
From what I can tell the XT1789-05 is a dual-sim and the XT1789-01 is a single-sim device.
I suspect that is the problem, or it just didn't flash correctly.
Either way locking the bootloader should only be done if firmware is stock unrooted and working correctly.
My only suggestion is trying the rescue option in.
MOTO Smart Assistant
Update your Moto with (Lenovo) MOTO Smart Assistant (PC)
Sent from my Rockchip RK3288 Chromebook using XDA Labs
Click to expand...
Click to collapse
I already tested with Lenovo Assist, it's didn't work as well!!!!
I stuck in the hell with no way out
AHMN48 said:
I already tested with Lenovo Assist, it's didn't work as well!!!!
I stuck in the hell with no way out
Click to expand...
Click to collapse
You can try using an USB C to LAN Adapter to connect to the internet.
Xargon1989 said:
You can try using an USB C to LAN Adapter to connect to the internet.
Click to expand...
Click to collapse
your idea is so good, I tried with Belkin USB-C to Ethernet and it doesn't work, I returned and Now I want to buy UNI based on their website will work with Android
also, what do you think about Wifi Wsky It's compatible with Android 8 too, because I find QR setup and it need to Wifi, right now can't find any Wifi but with this device will find Wifi, right?
thanks a lot
Xargon1989 said:
You can try using an USB C to LAN Adapter to connect to the internet.
Click to expand...
Click to collapse
I bought Uni USB-C to Ethernet Adaptor, Belkin USB-C to Ethernet Adaptor, there is a connection between phone and Modem, the Green and Orange Light will work fine, but no internet!!!!
I bought Wifi Adaptor as well, it doesn't work either!!!!
Now, recently Android 9 came for Verizon, there is any way to update my current Android 8 to Android 9 via ADB Sideload (Recovery Mode) or Update from SD Card???
Or someone please help me or guide me, basically my phone died and I can't do anything!!!!
:crying:

Categories

Resources