Restoring STOCK on Sprint Galaxy S3 device - Sprint Samsung Galaxy S III

About 2-3 years ago I used to be really into installing custom roms on this phone and what not.
Anyway ever since I've had this phone I've messed up the motherboard twice and had ended up
buying a replacement twice.
Model #: SPH-L710
Android Version: 4.4.2
Baseband version: L710VPUDOH1
Kernel version: 3.4.0-2851177
Ok here are my two questions.
1. I tried to update the PRL, Profile and Firmware while connected to my home wi-fi unsuccessfully INTERNAL ERROR 407.
Do I need to be on a data plan for this to work??
2. Would restoring the phone to stock do anything? I see many stock images for this phone but baseband version ending
in ND8. Would the ND8 image work on this device?
Thanks in advance!

ryuja1 said:
About 2-3 years ago I used to be really into installing custom roms on this phone and what not.
Anyway ever since I've had this phone I've messed up the motherboard twice and had ended up
buying a replacement twice.
Model #: SPH-L710
Android Version: 4.4.2
Baseband version: L710VPUDOH1
Kernel version: 3.4.0-2851177
Ok here are my two questions.
1. I tried to update the PRL, Profile and Firmware while connected to my home wi-fi unsuccessfully INTERNAL ERROR 407.
Do I need to be on a data plan for this to work??
2. Would restoring the phone to stock do anything? I see many stock images for this phone but baseband version ending
in ND8. Would the ND8 image work on this device?
Thanks in advance!
Click to expand...
Click to collapse
What carrier were you on when you had service? Nd8 is for sprint. Yes it will work for that model. However nj2 is a little newer. Just don't try anything older than nd8, that is before Knox and will brick.
For example, do not flash anything from mk5.
Nd8 is fine (sprint)
Nj2 is fine (sprint)
Nj3 is fine (virgin/boost)
Ndc is fine (virgin/boost)
Oh1, is weird, some are for the triband. If you flash OH1, just make sure you don't see SPH L710T in the name anywhere. That "T" at the end means triband.

Related

[Q] Galaxy S3 Unknown ROM

Hi everyone, new android user here! I'll try to make this as brief as possible:
Recently purchased a used Unlocked Galaxy S3.
Currently using Bell Carrier on it and it works fine.
I noticed that even after restoring SuperSU was installed.
Checked download mode -> odin installed with custom binary
Checked to see if the phone has root access -> it does not
I wanted to try and flash it with a official ROM to completely restore factory settings but I don't know what the original carrier is so I don't know what ROM to download. I called a couple carriers but they have no record of the IMEI.
I'm fairly new to android and my past two days of google searching hasn't accomplished anything relative to my problem (although I know a lot more about the rooting community!) so I thought I'd ask here.
Is there any way to know what's going on here?
Can I restore the phone to factory firmware/ROM/etc.?
Here is some phone information:
Model: SGH-I747M
Android Version: 4.1.1
Baseband: I747MVLDLK4
Kernel: 3.0.31-538866
Build Number: JRO03L.I747MVLDLK4
Any help would be greatly appreciated!
Just go and download this program http://www.samsung.com/ca/support/usefulsoftware/KIES/JSP
Go to Tools > Firmware Install and Initialization
It will ask you for your model number and Serial number. It will use those to determine what stock ROM is correct for your phone.
It will then flash you to stock, just as Odin would, including the stock recovery.
theXact said:
Hi everyone, new android user here! I'll try to make this as brief as possible:
Recently purchased a used Unlocked Galaxy S3.
Currently using Bell Carrier on it and it works fine.
I noticed that even after restoring SuperSU was installed.
Checked download mode -> odin installed with custom binary
Checked to see if the phone has root access -> it does not
I wanted to try and flash it with a official ROM to completely restore factory settings but I don't know what the original carrier is so I don't know what ROM to download. I called a couple carriers but they have no record of the IMEI.
I'm fairly new to android and my past two days of google searching hasn't accomplished anything relative to my problem (although I know a lot more about the rooting community!) so I thought I'd ask here.
Is there any way to know what's going on here?
Can I restore the phone to factory firmware/ROM/etc.?
Here is some phone information:
Model: SGH-I747M
Android Version: 4.1.1
Baseband: I747MVLDLK4
Kernel: 3.0.31-538866
Build Number: JRO03L.I747MVLDLK4
Any help would be greatly appreciated!
Click to expand...
Click to collapse
It definitely looks like you are on the stock Jelly Bean firmware from Samsung. I747M is the Canadian model (747 is ATT). Your build number also looks to be the stock 4.1.1 based on the DLK4 build number! Just as the last guy said, grab kies or use Odin to go back to complete stock if you are not happy with what you have now. If your phone is showing custom binary flashes and you want to get rid of that, give Triangle Away a try! Good luck. :good:
Lumixz said:
Just go and download this program *link removed since I'm a newbie*
Go to Tools > Firmware Install and Initialization
It will ask you for your model number and Serial number. It will use those to determine what stock ROM is correct for your phone.
It will then flash you to stock, just as Odin would, including the stock recovery.
Click to expand...
Click to collapse
Thank you! That worked like a charm! The device is now in a "normal" state and the binaries are "official".
BAM1789 said:
]It definitely looks like you are on the stock Jelly Bean firmware from Samsung. I747M is the Canadian model (747 is ATT). Your build number also looks to be the stock 4.1.1 based on the DLK4 build number! Just as the last guy said, grab kies or use Odin to go back to complete stock if you are not happy with what you have now. If your phone is showing custom binary flashes and you want to get rid of that, give Triangle Away a try! Good luck.
Click to expand...
Click to collapse
Thanks for the advice! I'm not too concerned about the flash count, that's only really important your warranty to to be valid, right? But I'll look into it, it may be worth it anyway.
Thanks again everyone!

[Q] N7100 No Wifi after "Emergency Calls" FIX and WiFi Fix (STOCK 4.3)

Hello Everybody,
I would like to begin by saying how much I've learned in xda-devs in the last few days just by searching around the forum and Fixing different things here and there.
This is such a great community that I decided to register
OK so heres the deal:
Last week i bought a Note-2 (N7100) running Samsung Android 4.1.2 (Israel Version) + Rooted
I wanted to upgrade to 4.3 but 4.3 isn't yet released in Israel according to sammobile.com and other people I asked.
I found a Stock Deodexed Pre-Rooted ROM here on the forums (I think version was MK4), Flashed it, and lost cellular abilities (there is signal but emergency calls only) and WiFi.
Flashed WiFi FIX by Dr. Ketan, and by installing Devil's kernel (Patched_N7100_MK4_KERNEL.zip) and GT-N7100_ModemMJ9.zip I was able to gain 3G Functionality back.
Phone was working great for a few days, but then I decided to upgrade to Dito Note v3.2 because i wanted Note-3 Functionality.
After flashing it, I lost the ability to register to network again, started receiving "UIds on the system are inconsistent " and phone crashed every few minutes, screen stoped working every now and then.
I immediately looked for a different ROM to flash, (couldn't find the original ROM I flashed but i found DrKetan_Custom_ROM_V6_1).
So i wipe the phone, cache, sd-card and everything besides formatting the internal storage, Installed this ROM but still had the same issues with ULDS on the system, phone crashes and display shuts down while phone is still working).
Desperate, I downloaded Stock firmware (With KNOX) and flashed it to my device (I used Odin 3.09 and flashed everything, BL,CP,AP,CSC that was included within the original ROM). this was the Seri-Lanka firmware if I remember right.
This time phone boots without complaining about system files, but got "Emergency calls only" (IMEI and S/N still ok!).
In addition, I now have bootloader with KNOX.
I then thought, maybe the modem version is incompatible with the Cellular frequencies in my country (Israel Freqs: 850,2100), so i looked for countries with similar freq and downloaded official firmware for Thailand.
Flashed it with ODIN (same as before, BL,CP,AP,CSC basically everything) device boots fine, WiFi was working, but couldn't register on network ("emergency calls only") even if you can see your provider while manual scanning, registers successfuly apparently,but still no service.
Fraustrated, I rooted the device (Knox turned 0x1 but it doesn't really matter to me cause no warranty anyway), installed Philiz and flashed the 2 Fixes I mentioned at the begining (Devils kernel + Mj9 modem).
This resolved "Emergency calls only" issue, but now i cannot open WiFi at all!.
I tried to flash WiFi fix that i found in this forums but it didn't work. I've given everything I have in the last 2 days trying to fix this issue but I cant seem to solve this problem.
Now I'm just thankful that I can start/receive phone calls with my device.
I can't seem to understand, how did I not have signal with stock ROM?
could it be EFS was corrupted somehow so that only MJ9 Modem + Devil's Kernel read it?
How can i FIX WiFi?
Included screen-shots of "About Phone" and "*#1234#"
Thanks ahead,
psycintosh said:
I can't seem to understand, how did I not have signal with stock ROM?
could it be EFS was corrupted somehow so that only MJ9 Modem + Devil's Kernel read it?
How can i FIX WiFi?
Included screen-shots of "About Phone" and "*#1234#"
Thanks ahead,
Click to expand...
Click to collapse
did you seen this
cosmyndemeter said:
did you seen this
Click to expand...
Click to collapse
Yes, this is the exact post that i followed to solve "Emergency calls only" issue, but unfortunately I still don't have WiFi
psycintosh said:
Yes, this is the exact post that i followed to solve "Emergency calls only" issue, but unfortunately I still don't have WiFi
Click to expand...
Click to collapse
try this wifi fix
cosmyndemeter said:
try this wifi fix
Click to expand...
Click to collapse
Just flashed this with Odin 3.09 but it didn't solve Wi-Fi Issues. isn't this fix for devices without the original Bootloader?
psycintosh said:
Just flashed this with Odin 3.09 but it didn't solve Wi-Fi Issues. isn't this fix for devices without the original Bootloader?
Click to expand...
Click to collapse
try to flash stock firmware with stock kernel with kies. here you find a guide and let me know if it solved the problem
cosmyndemeter said:
try to flash stock firmware with stock kernel with kies. here you find a guide and let me know if it solved the problem
Click to expand...
Click to collapse
OK Thanks very much for all of your help.
Does it matter what version of 4.3 I choose to flash via Kies?
In Israel only version 4.1.2 is available and I know that going back from 4.3 most likely will erase my IMEI / S/N.
If i choose a stock rom from SamMobile does it matter what country it comes from?
I don't really understand why are there different modems to different countries, aren't all versions alike?
cosmyndemeter said:
try to flash stock firmware with stock kernel with kies. here you find a guide and let me know if it solved the problem
Click to expand...
Click to collapse
OK so i flashed with Kies 3 and now Wifi is back but again, "Emergency calls only"..
any idea?
psycintosh said:
OK so i flashed with Kies 3 and now Wifi is back but again, "Emergency calls only"..
any idea?
Click to expand...
Click to collapse
try this fix
flash via recovery (phliz or twrp)
i have the same problem, and like you, i tried all fixes, but, with nothing solution. I've been thinking that there is no solution, just sell the bad phone and buy a new one, and then no more experience with :crying:
r0ckside0710 said:
i have the same problem, and like you, i tried all fixes, but, with nothing solution. I've been thinking that there is no solution, just sell the bad phone and buy a new one, and then no more experience with :crying:
Click to expand...
Click to collapse
I don't belive in this approach, I know for sure that there is a way.
after re-flashing with Kies and getting "Emergency Calls" again, i tried to flash only the modem, and i saw that i lost connection with cellular but Wi-Fi was still working. only after flashing Devil's kernel it seems that Wi-Fi stops working..
I just got home and i'm not expecting any calls until tomorrow, I will look around maybe an alternative kernel will solve our problems..
psycintosh said:
I don't belive in this approach, I know for sure that there is a way.
after re-flashing with Kies and getting "Emergency Calls" again, i tried to flash only the modem, and i saw that i lost connection with cellular but Wi-Fi was still working. only after flashing Devil's kernel it seems that Wi-Fi stops working..
I just got home and i'm not expecting any calls until tomorrow, I will look around maybe an alternative kernel will solve our problems..
Click to expand...
Click to collapse
Maybe we just need the correct kernel and modem, the problem is that no one's development. Another solution would be to discover how to downgrade from 4.3 to 4.1. For now, our only option is to wait for more solutions and development
r0ckside0710 said:
Maybe we just need the correct kernel and modem, the problem is that no one's development. Another solution would be to discover how to downgrade from 4.3 to 4.1. For now, our only option is to wait for more solutions and development
Click to expand...
Click to collapse
OK, so as I promised yesterday, I had the time to dig in to this subject yesterday and I managed to find a solution to get both, WiFi and Cellular working (together!)
Here are the steps i took:
1) Installed Stock ROM 4.3 with MK4 as the main and BL version (this will install Knox but i already had it) and modem version MJ9 (Odin 3.09)
2) Root the device with CF-Auto-Root-t03g-t03gxx-gtn7100
3) Install custom Recovery (I used philz_touch_6.07.9-n7100.tar.md5)
4) Very important! After device boots it automatically attempts to perform update with samsung! DO NOT LET IT as it will install updated modem version. it is important that we have MK4 Kernel and MJ9 Modem for this to work.
5) Flash via recovery the following files:
a) Patched_N7100_MK4_KERNEL - This installs a patched Kernel only this time because we didn't let phone update version after boot, it will be compatible with Phones version.
b) GT-N7100_ModemMJ9 - This patches the MJ9 Modem.
After performing all the above steps I finally managed to get Cellular connectivity and WiFi together. Hope it works for other people as well.
I still don't understand why Stock Kernel with Stock MJ9 modem won't work, what do those patches contain that allows me to get connectivity to cellular network?
This device is not black-list and IMEI is still original and S/N but for some reason won't work with stock.
Seems to me like some of the ROMs maybe modify EFS so that only patched Kernel and MJ9 Modem will work and it's not backwards compatible.
Can anyone confirm this? and if so, is there a way to convert the "modified" EFS version to stock compatible version? or is the EFS file encrypted with propriety Samsung encryption?
You can download the referred files here
is good to know that you resolved your problem! Only one question, this is the rom of my country, will serve me? Or that rom should I use? The specifications are from sammobile.com
Model: GT-N7100
Country: Mexico (Telcel)
Version: Android 4.3
Changelist: 2194881
Build date: Mon, 25 Nov 2013 16:04:50 +0000
Product Code: TCE
PDA: N7100UBUEMK4
CSC: N7100TCEEML1
MODEM: N7100UBUEMJ4
r0ckside0710 said:
is good to know that you resolved your problem! Only one question, this is the rom of my country, will serve me? Or that rom should I use? The specifications are from sammobile.com
Model: GT-N7100
Country: Mexico (Telcel)
Version: Android 4.3
Changelist: 2194881
Build date: Mon, 25 Nov 2013 16:04:50 +0000
Product Code: TCE
PDA: N7100UBUEMK4
CSC: N7100TCEEML1
MODEM: N7100UBUEMJ4
Click to expand...
Click to collapse
Hi, as you can see modem version for you is ending with MJ4 so it's not the same as my version.
Look for a version that has modem version ending with MJ9 and then apply the patch (because patch is for MJ9 modem, and not any other modem from my understanding)
Hope you get your device working!!
More explanation
Here are the steps i took:
1) Installed Stock ROM 4.3 with MK4 as the main and BL version (this will install Knox but i already had it) and modem version MJ9 (Odin 3.09)
2) Root the device with CF-Auto-Root-t03g-t03gxx-gtn7100
3) Install custom Recovery (I used philz_touch_6.07.9-n7100.tar.md5)
4) Very important! After device boots it automatically attempts to perform update with samsung! DO NOT LET IT as it will install updated modem version. it is important that we have MK4 Kernel and MJ9 Modem for this to work.
5) Flash via recovery the following files:
a) Patched_N7100_MK4_KERNEL - This installs a patched Kernel only this time because we didn't let phone update version after boot, it will be compatible with Phones version.
b) GT-N7100_ModemMJ9 - This patches the MJ9 Modem.
Hi there, and thanks a lot for your effort, I am really confused about step number 4, I haven't detected any update from Samsung's side, can you please provide more explanation?
Thanks

[Q] drop service on aosp..

i seem to be having problems maintaining service in areas i know i should have it. i was on insane kit kat previously, i used to have to put in airplane mode or hot reboot just to get service again. everytime i would turn screen off it would drop service again. i even flashed the nb4 modem...so i switched to gpe 4.4.4 had great service..now again...in areas i had 4g i have nothing...not sure what to do at this point..tried both touchwiz and aosp roms...tried nb4...frustrated...anyone have any clue as to what else i am doing wrong? i alwasys enable roaming...always change network if needed to the most options...at a loss....
What bootloader are you on?
i am not sure...
serio22 said:
What bootloader are you on?
Click to expand...
Click to collapse
not sure what boot loader..how do i tell? is there a place to look?
not sure
Heffler said:
not sure what boot loader..how do i tell? is there a place to look?
Click to expand...
Click to collapse
i didnt start on 4.4.4...never had the official update to kit kat. only jelly bean. rooted then...been on custom roms since...never flashed anything except the nb4 modem while was on insane kk because i thought that might solve problem...
So you did the update to 4.3? Get phone info from playstore and under firmware info it will tell you what bootloader you are currently on.
bootloader
serio22 said:
So you did the update to 4.3? Get phone info from playstore and under firmware info it will tell you what bootloader you are currently on.
Click to expand...
Click to collapse
m919uvuamdl is my bootloader...ummm its also identical to the baseband version...not sure if that means anything...
Check your baseband version in settings, more, about device see if it matches up. To my understanding, you had flashed the NB4 modem correct? It might have failed
serio22 said:
Check your baseband version in settings, more, about device see if it matches up. To my understanding, you had flashed the NB4 modem correct? It might have failed
Click to expand...
Click to collapse
it matches up...m919....so this means i have to re odin flash the nb4? does the basband change on every rom you flash?
Yes Odin the NB4 modem, and no it does not change when you flash ROMs.. It probably just failed to flash, make sure you flash it twice
no go...
serio22 said:
Yes Odin the NB4 modem, and no it does not change when you flash ROMs.. It probably just failed to flash, make sure you flash it twice
Click to expand...
Click to collapse
flashed it twice with odin...i was told to open modem.bin file with the phone button in odin...although if its updating the bootloader...wouldnt i use the boot loader button? but no way was gonna test without checking...so only did with phone button..
Its not updating the bootloader, its updating the modem
Having the same exact issue - cell signal was working to make calls when I got the phone and for a while on an older SOKP rom.
Flashed a newer version and now signal is weaker, data/text works, but making a call fails saying "out of service area" and cell signal completely drops out for 10-15sec before returning for data/text.
I've flashed FROM MDL modem to MK2 and NB4 both and no improvement.
Flashed back to the older SOKP version, no fix.
Flashed other AOSP/GPE roms, no fix.
Flashed Wicked v10, no fix.
Flashed back to stock, no fix.
Flashed back MDL modem, no fix.
Checked IMEI, not stolen or blacklisted.
This is an SGH-M919 S4, but is unlocked (otherwise would not be getting ANY data/text signal either).
My next step is to make sure AT&T has the correct IMEI in their system and see if that helps at all.
But I'm really at my wits' end as to why it all of a sudden flaked out for phone calls.
[UPDATE] Went to AT&T and updated my IMEI number in their system. Signal strength has improved enough and I'm not able to make calls.

[Q] ATT S3 Upgrade to 4.4

I am not very much familiar with all intricacies of Android system but i have played around rooting and putting customer firmwares on few devices.
I have AT&T Galaxy S3 with following detals:
Baseband: I747UCUEMJB
Version: 4.3
I had the device rooted in the past but recently un-rooted it and reset the flash counter as well and did factory reset. Did all that since i wanted to use ISIS and couldn't make it work on a rooted S3. Seems it used to work before till they updated ISIS app to patch it.
Now AT&T got 4.4 update and my phone detects it, downloads it but while installing fails at 32%. I have seen many threads where people faced similar issues due to their phones being rooted. Seems something on my phone didn't reset to default.
I found one post which mentions that i can download UCUEMJB_to_UCUFNE4_Firmware_update.zip and load it to phone using TWRP. As i understand, this will update the baseband but android version still remains at 4.3 (?). Is that the path i should be looking for or i am shooting in wrong direction? I want to stay on default firmware since i like to use ISIS till they keep running those cashback promos
Would appreciate some feedback.
Download MJB firmware (thread in General) and flash with Odin. You can stop there or try the ota again.
DocHoliday77 said:
Download MJB firmware (thread in General) and flash with Odin. You can stop there or try the ota again.
Click to expand...
Click to collapse
Thanks for the reply.
Just to confirm so that i don't mess up, i will apply the following(is modem same as firmware?) and then try OTA.
I747UCUEMJB: modem_CWM_I747UCUEMJB.zip
No. The modem is only one part of the firmware. Firmware includes bootloaders, kernel, system, modem and more.

Samsung siii i747 no emai and baseband

Hello good day, i have a Samsung SIII i747 and dont show emai and baseband have a
build number: imm76d.i747ucalg1
android version: 4.0.4
what can i do in this situation?? Explain me with more details.
I just restore factory... and no response of signal, but all the rest of functions runs ok!!!
Thanks all
When you say you restored factory, I'm assuming you mean factory reset and not flashing the stock firmware, is that correct. And do you mean imei when you wrote emai?
The first thing you need to do is Flash the stock firmware via Odin. That often resolves these problems.
Beyond that I'd need more information on how the problem occurred to begin with.
Sent from my SGH-T999 using Tapatalk

Categories

Resources