Hello good day, i have a Samsung SIII i747 and dont show emai and baseband have a
build number: imm76d.i747ucalg1
android version: 4.0.4
what can i do in this situation?? Explain me with more details.
I just restore factory... and no response of signal, but all the rest of functions runs ok!!!
Thanks all
When you say you restored factory, I'm assuming you mean factory reset and not flashing the stock firmware, is that correct. And do you mean imei when you wrote emai?
The first thing you need to do is Flash the stock firmware via Odin. That often resolves these problems.
Beyond that I'd need more information on how the problem occurred to begin with.
Sent from my SGH-T999 using Tapatalk
Related
Hi everyone, new android user here! I'll try to make this as brief as possible:
Recently purchased a used Unlocked Galaxy S3.
Currently using Bell Carrier on it and it works fine.
I noticed that even after restoring SuperSU was installed.
Checked download mode -> odin installed with custom binary
Checked to see if the phone has root access -> it does not
I wanted to try and flash it with a official ROM to completely restore factory settings but I don't know what the original carrier is so I don't know what ROM to download. I called a couple carriers but they have no record of the IMEI.
I'm fairly new to android and my past two days of google searching hasn't accomplished anything relative to my problem (although I know a lot more about the rooting community!) so I thought I'd ask here.
Is there any way to know what's going on here?
Can I restore the phone to factory firmware/ROM/etc.?
Here is some phone information:
Model: SGH-I747M
Android Version: 4.1.1
Baseband: I747MVLDLK4
Kernel: 3.0.31-538866
Build Number: JRO03L.I747MVLDLK4
Any help would be greatly appreciated!
Just go and download this program http://www.samsung.com/ca/support/usefulsoftware/KIES/JSP
Go to Tools > Firmware Install and Initialization
It will ask you for your model number and Serial number. It will use those to determine what stock ROM is correct for your phone.
It will then flash you to stock, just as Odin would, including the stock recovery.
theXact said:
Hi everyone, new android user here! I'll try to make this as brief as possible:
Recently purchased a used Unlocked Galaxy S3.
Currently using Bell Carrier on it and it works fine.
I noticed that even after restoring SuperSU was installed.
Checked download mode -> odin installed with custom binary
Checked to see if the phone has root access -> it does not
I wanted to try and flash it with a official ROM to completely restore factory settings but I don't know what the original carrier is so I don't know what ROM to download. I called a couple carriers but they have no record of the IMEI.
I'm fairly new to android and my past two days of google searching hasn't accomplished anything relative to my problem (although I know a lot more about the rooting community!) so I thought I'd ask here.
Is there any way to know what's going on here?
Can I restore the phone to factory firmware/ROM/etc.?
Here is some phone information:
Model: SGH-I747M
Android Version: 4.1.1
Baseband: I747MVLDLK4
Kernel: 3.0.31-538866
Build Number: JRO03L.I747MVLDLK4
Any help would be greatly appreciated!
Click to expand...
Click to collapse
It definitely looks like you are on the stock Jelly Bean firmware from Samsung. I747M is the Canadian model (747 is ATT). Your build number also looks to be the stock 4.1.1 based on the DLK4 build number! Just as the last guy said, grab kies or use Odin to go back to complete stock if you are not happy with what you have now. If your phone is showing custom binary flashes and you want to get rid of that, give Triangle Away a try! Good luck. :good:
Lumixz said:
Just go and download this program *link removed since I'm a newbie*
Go to Tools > Firmware Install and Initialization
It will ask you for your model number and Serial number. It will use those to determine what stock ROM is correct for your phone.
It will then flash you to stock, just as Odin would, including the stock recovery.
Click to expand...
Click to collapse
Thank you! That worked like a charm! The device is now in a "normal" state and the binaries are "official".
BAM1789 said:
]It definitely looks like you are on the stock Jelly Bean firmware from Samsung. I747M is the Canadian model (747 is ATT). Your build number also looks to be the stock 4.1.1 based on the DLK4 build number! Just as the last guy said, grab kies or use Odin to go back to complete stock if you are not happy with what you have now. If your phone is showing custom binary flashes and you want to get rid of that, give Triangle Away a try! Good luck.
Click to expand...
Click to collapse
Thanks for the advice! I'm not too concerned about the flash count, that's only really important your warranty to to be valid, right? But I'll look into it, it may be worth it anyway.
Thanks again everyone!
I am in need of some help. I tried to upgrade my rom last night on my Galaxy Note 2 SGH-i317M, and somehow the baseband is now missing. I was using it with Winds network without any issues before this problem.
Can someone give me some info as to how I would re-install the baseband?
Any help would be appreciated because I don't have a backup phone to use.
Reinstall official firmware. Either 4.3 if you updated or 4.1.2.
Hi, I have just flashed Rooted Note 2 on 4.3 to the latest stock ROM which I downloaded from the SamMobile and now it will not register on the network.
The new version I flashed was the same as the old as i found it with the CSC N7100BTUEMK2 on sam mobile.
I checked the IMEI and it says 00499010640000 in status menu which is different from the one under the battery.
I did not perform a backup of anything as I was not worried about losing any data.
Any ideas what has happened to it and how to get the IMEI correct again?
I understand this is something to do with an efs file but in what way it has become faulty from flashing the same rom I cannot decipher
Any help much appreciated! :good:
stevelav said:
Hi, I have just flashed Rooted Note 2 on 4.3 to the latest stock ROM which I downloaded from the SamMobile and now it will not register on the network.
The new version I flashed was the same as the old as i found it with the CSC N7100BTUEMK2 on sam mobile.
I checked the IMEI and it says 00499010640000 in status menu which is different from the one under the battery.
I did not perform a backup of anything as I was not worried about losing any data.
Any ideas what has happened to it and how to get the IMEI correct again?
I understand this is something to do with an efs file but in what way it has become faulty from flashing the same rom I cannot decipher
Any help much appreciated! :good:
Click to expand...
Click to collapse
From my experience:
1) Reflash the ROM.
2) Flash a custom ROM.
Both worked for me.
N7105 rocking AOSB with AGNi kernel,
Click "Thanks" if I was of any help!
Thanks, I have reflashed the current 4.3 rom UEMK9 and a slightly older UEMK4 with a DEMJ9 radio.
I have tried lots of radios - DM3, XXDME4, XXMI6, XXMJ5, XXMJ2, and some other modem.bin
From what I understand its when you go from newer to older roms that you get IMEI problems, so its prob useless to try pre 4.3
Its all a bit confusing to me and which rom has which radio seems like an arcane mystery.
It is quite possible that I flashed a same version 4.3 rom but my old radio was different and not knowing it was such a minefield on Galaxy phones I never checked that or bothered with a back up.
I may have to resort to paying the people at unlocksamsung online £26 to reset my IMEI
Can anyone tell me, is it just the radio that causes the IMEI problem and should I just trawl through flashing radio zips until my IMEI comes back so I can save the efs file?
BTY everything else seems ok SN is correct and wifi works fine, I just can't get on a network without my correct IMEI
Thx
i also have the same issue on my note 2 gt-n7100 and now phone does no respond to the touch post rooting and all..i am tired of rooting and unrooting the phone like 100 times allready and now my phone is stuck in loop
To keep things short, I flashed stock Touchwiz 4.4.2 via Odin on my Note 2(Wind mobile) because my mom likes the Samsung gimmicky features but I have a problem. I have no cellphone service. I flashed this T889VVLUDNH2_T889VYVLDNH2_T889VVLUDNH2_HOME.tar. The phone says my IMEI is null and the servicemode is blank. I hope someone can help me.
If it helps, I was running lollipop 5.1.1 roms before I wiped everything to flash touchwiz via odin.
SHINee2 said:
To keep things short, I flashed stock Touchwiz 4.4.2 via Odin on my Note 2(Wind mobile) because my mom likes the Samsung gimmicky features but I have a problem. I have no cellphone service. I flashed this T889VVLUDNH2_T889VYVLDNH2_T889VVLUDNH2_HOME.tar. The phone says my IMEI is null and the servicemode is blank. I hope someone can help me.
If it helps, I was running lollipop 5.1.1 roms before I wiped everything to flash touchwiz via odin.
Click to expand...
Click to collapse
I had same problem make sure you flash a proper Radio for your phone model and a kernal..
lb704 said:
I had same problem make sure you flash a proper Radio for your phone model and a kernal..
Click to expand...
Click to collapse
Same problem here.
By Radio you mean a modem.bin file via Odin?
About 2-3 years ago I used to be really into installing custom roms on this phone and what not.
Anyway ever since I've had this phone I've messed up the motherboard twice and had ended up
buying a replacement twice.
Model #: SPH-L710
Android Version: 4.4.2
Baseband version: L710VPUDOH1
Kernel version: 3.4.0-2851177
Ok here are my two questions.
1. I tried to update the PRL, Profile and Firmware while connected to my home wi-fi unsuccessfully INTERNAL ERROR 407.
Do I need to be on a data plan for this to work??
2. Would restoring the phone to stock do anything? I see many stock images for this phone but baseband version ending
in ND8. Would the ND8 image work on this device?
Thanks in advance!
ryuja1 said:
About 2-3 years ago I used to be really into installing custom roms on this phone and what not.
Anyway ever since I've had this phone I've messed up the motherboard twice and had ended up
buying a replacement twice.
Model #: SPH-L710
Android Version: 4.4.2
Baseband version: L710VPUDOH1
Kernel version: 3.4.0-2851177
Ok here are my two questions.
1. I tried to update the PRL, Profile and Firmware while connected to my home wi-fi unsuccessfully INTERNAL ERROR 407.
Do I need to be on a data plan for this to work??
2. Would restoring the phone to stock do anything? I see many stock images for this phone but baseband version ending
in ND8. Would the ND8 image work on this device?
Thanks in advance!
Click to expand...
Click to collapse
What carrier were you on when you had service? Nd8 is for sprint. Yes it will work for that model. However nj2 is a little newer. Just don't try anything older than nd8, that is before Knox and will brick.
For example, do not flash anything from mk5.
Nd8 is fine (sprint)
Nj2 is fine (sprint)
Nj3 is fine (virgin/boost)
Ndc is fine (virgin/boost)
Oh1, is weird, some are for the triband. If you flash OH1, just make sure you don't see SPH L710T in the name anywhere. That "T" at the end means triband.