Related
http://forum.xda-developers.com/showthread.php?t=638835
Is running now on my tilt. Seems a little bit zippier than previous builds as far as everything else goes there is not much change, wifi and bluetooth enable but I have not had devices around me to test functionality.
If you read the thread that is linked there are not much changes in this build only a few minor ones which I think have already been fixed with the updates we got from poly. This is not the release we need to be watching for from what I have read it will be the next couple releases that are in beta testing right now.
I will play with this for a couple days and if all seems well as far as stability and if I have the time I will post a d/l link but I personally see no need for the update
garringm said:
Is running now on my tilt. Seems a little bit zippier than previous builds as far as everything else goes there is not much change, wifi and bluetooth enable but I have not had devices around me to test functionality.
If you read the thread that is linked there are not much changes in this build only a few minor ones which I think have already been fixed with the updates we got from poly. This is not the release we need to be watching for from what I have read it will be the next couple releases that are in beta testing right now.
I will play with this for a couple days and if all seems well as far as stability and if I have the time I will post a d/l link but I personally see no need for the update
Click to expand...
Click to collapse
Running this on Kaiser? Some more info would be nice
lggyxx said:
Running this on Kaiser? Some more info would be nice
Click to expand...
Click to collapse
After playing around with it yesterday heres what I have
- No incoming calls
- No GPS
- Bluetooth works
- Wifi works
- Use of live wallpapers causing problems with phone going through soft reset, or locking up.
I did not fool around with it too long before going back to polymods build
But like I said previously if you read about the release this is not really a big step forward it looks to me as just a bunch of the small bug fixes put together into one big build. I am not a developer but somehow I got it to work. It does seem to be a little zippier than previous releases though. If you use Launcher2 you have to be very precise with your lcd.density to see the app tray correctly. If you dig further into the link that was posted we would be best to wait for future releases as these should have some big fixes and tweaks which are in the works now
This is my port of Cyanogen's latest Eclair build, v5.07-stable.
It is basically mssmison's 5.07-test3 build updated, I used the same process he did to port this one.
Included Apps:
-Connectbot
-Astro
-RogueTools
-LinPack
-HomeSwitcher
Notes:
-No major problems found so far (besides Eclair-specific problems like the Camera not working).
-Speed is comparable to other Eclair builds, maybe even a bit zippier at times.
-It should be fully compatible with any themes/mods made for Cyanogenmod v5.07-stable. (Although my attempt at flashing this theme sent my phone into an "android.power wakeup" loop, so be cautious!)
--Darkstar theme isn't working either, thx for trying @thebulletfromhell!
-It is set to 120DPI by default, so if running anything other than 320x240, you'll have to use RogueTools to adjust it. I am currently running it at 320x240x120dpi and haven't experienced many problems, except the top and bottom of the Dialer are cutoff, button's still reachable though. (If someone wants to help me fix this, please do, I just don't know where to start)
-Wifi support for the Kaiser is built in, should work out of the box!
-Starting with v1.2, Userinit.conf is added to the root of your SD, by default it has 16MB of Compcache, but this can be adjusted by editing the file.
Download! [Last updated on 5/29/10]
Changelog:
v1.3
-Removed userinit.conf, now everything is run directly from /system/bin/userinit.sh
-32MB Compcache by default
-Removed overclocking from the get-go. You can set it manually via RogueTools.
-Userinit.sh now renice's com.android.phone to try and improve ringing delay.
v1.2.1
-Removed redundant wlan.ko
-Replaced wlan.ko with kallt_kaffe's
-Reverted a change to userinit.sh that was causing awful performance
v1.2
-Removed Dropbox, Speedtest, Twicca, Shazam, 3Banana Notes, and LiveWallpapers
-Added Camera back (Fixes FC when trying to crop a wallpaper)
-Fixed Facebook Sync
-Userinit.conf is added to the root of SD card on first boot. This allows you to control Compcache, swap, and many other settings.
Click to expand...
Click to collapse
Thanks go out to mssmision for his port+quick guide to porting, Cyanogen for the build, and all the other developers that worked on getting Android running on this phone! You guys have made this phone so much more usable.
Woah, it's weird being in a different forum.
What is updated in this new version (1.1)? I'm still running the first one you posted in the Vogue forums (on a Vogue) and it's working great.
Cool!
Gonna try this one out.
Thanks a lot!
pastaeter said:
Cool!
Gonna try this one out.
Thanks a lot!
Click to expand...
Click to collapse
Let me know how it goes.
drkow19 said:
Woah, it's weird being in a different forum.
What is updated in this new version (1.1)? I'm still running the first one you posted in the Vogue forums (on a Vogue) and it's working great.
Click to expand...
Click to collapse
The updated version has wifi working for Kaiser, and some compcache tweaks done to /system/bin/userinit.conf. The first version I think I disabled compcache entirely, and it really showed once you got the build fully loaded.
any screens? how to install themes on Kaiser? Little guide please...
just downloaded going to give it a try
all live wallpapers dont work and show force close (exclude polar clock)
but its cool and fast (default it set at 450MHz and i set it to 500MHz)
Bench at 500MHz: MFLOPS:2.141
Times: 2.53s
Norm Res: 3.36
Precision: 2.224...
Maybe you add-in many of not neccessary app..
and one very good thing.. i have i think 320x428 and 120DPi in RogueTools. and its less blurry than thats sets in myn
Congrats for good rom.
exist CM with sense 2.1 on kaiser?
Compared to super eclair it has a few advantages:
-language dutch is included and fully working
-more options: look at call settings.
-market is fully working (for now), but no paid apps (super eclair market broke after using a time, not all apps can be found).
But less free ram.
Not really worth upgrading for me (I have 2 kaisers).
i've installed this build on my kaiser and it works great.
tested the wifi, the market, both work great. bluetooth turns on but i haven't had the chance to send or receive any files or to connect it to my wireless headsets.
did not test the data yet.
installed helix launcher and i think it moves a little bit faster than the regular home screen.
thank for the upload
mazz8y said:
any screens? how to install themes on Kaiser? Little guide please...
Click to expand...
Click to collapse
Here's a guide to installing to NAND. The build is not themed at all, so you can check out the official Cyanogen thread for screenshots, they should look identical (besides a smaller res).
Michga said:
all live wallpapers dont work and show force close (exclude polar clock)
but its cool and fast (default it set at 450MHz and i set it to 500MHz)
Bench at 500MHz: MFLOPS:2.141
Times: 2.53s
Norm Res: 3.36
Precision: 2.224...
Maybe you add-in many of not neccessary app..
Click to expand...
Click to collapse
Yeah I just noticed the Live Wallpapers crash, didn't try this out before. Not sure if it's possible to fix it, I don't remember them working on any other Eclair builds.
Also, I noticed that /system is running low on space, so I will definitely try to trim some fat by removing pre-installed apps.
Michga said:
exist CM with sense 2.1 on kaiser?
Click to expand...
Click to collapse
Not that I know of. But there is a QVGA Android phone with Sense coming out sometime this summer, and I'm sure someone will attempt to port it.
From the vogue thread...
Great build, I'm running it right now, and it thus far seems to be fast and stable! (bumped up the o/c to 500)
Two pieces of feedback...
If you can get facebook sync to work with the most current facebook app (the one with the "inbox" button rather than the "take photo" button it would be amazing. As of now, the only way to get facebook sync to work is to run the Moto Droid apk, which is the previous version.)
Anyway to get full market from the getgo? I have marketenabler working, but it isn't always consistent.
That being said, amazing build. Good work.
Click to expand...
Click to collapse
@GeJohnO: Looks like this is a known issue with the original Cyanogen
A few known issues;
* Facebook from market breaks sync for Market users (see forum for alternative apk) - only on Dream, Sapphire is OK. Blame Facebook.
Click to expand...
Click to collapse
I'll look into including whatever alternate APK in the next build.
Also I found that taking out the Camera app causes Gallery to FC when trying to crop a wallpaper, so I'll fix that as well.
I just got a text message from the 24th of this months with super ecalir lite, I don't know if this version hzs those issues too?
aqtrans said:
This is my port of Cyanogen's latest Eclair build, v5.07-stable.
It is basically mssmison's 5.07-test3 build updated, I used the same process he did to port this one.
Included Apps:
-Connectbot
-Twicca
-3banana Notes
-Astro
-RogueTools
-Dropbox
-LinPack
-Speedtest
-MetaMorph
-HomeSwitcher
(I will probably cut this down a lot in future builds, kind of made this for my own personal use and threw in all the Apps I usually reinstall)
Notes:
-No major problems found so far (besides Eclair-specific problems like the Camera not working).
-Speed is comparable to other Eclair builds, maybe even a bit zippier at times.
-It should be fully compatible with any themes/mods made for Cyanogenmod v5.07-stable. (Although my attempt at flashing this theme sent my phone into an "android.power wakeup" loop, so be cautious!)
-It is set to 120DPI by default, so if running anything other than 320x240, you'll have to use RogueTools to adjust it. I am currently running it at 320x240x120dpi and haven't experienced many problems, except the top and bottom of the Dialer are cutoff, button's still reachable though. (If someone wants to help me fix this, please do, I just don't know where to start)
-Wifi support for the Kaiser is built in, should work out of the box!
Download!
Thanks go out to mssmision for his port+quick guide to porting, Cyanogen for the build, and all the other developers that worked on getting Android running on this phone! You guys have made this phone so much more usable.
Click to expand...
Click to collapse
Add the darkstar theme to not working as well. It put it in a permanent loop
thebulletfromhell said:
Add the darkstar theme to not working as well. It put it in a permanent loop
Click to expand...
Click to collapse
The darkstar theme hasn't been released for 5.0.7 stable. The most current release is for test5. This may be why it's not working for you
I tried mssmison's test 3 out, and it was problematic. A lot of stuff would end up resetting the phone, back to the start up animation. Haven't tried this one yet, but my experience with Eclairs have been bad so far.
Wish there was a way to run Android on both NAND and SD cards. That way, I can test them out on the SD card, without destroying my NAND installation.
Running this port since yesterday and I must say I'm really impressed. Fast, responsive and also it seems not to drain battery as fast as other builds.
Any chance of getting Corporate Calendar in the next version (currently Exchange sync works only for Mail and Contacts in this build).
Version 1.2 posted! Changelog in the OP.
I tried adding the modded Market, but it kept FC'ing whenever an app would go to install. Looking at the thread, it seems like a known issue, without a fix that I could find
robuser007 said:
I just got a text message from the 24th of this months with super ecalir lite, I don't know if this version hzs those issues too?
Click to expand...
Click to collapse
I haven't experienced any such issues. As far as I know, I've been receiving texts on time, without delay.
thebulletfromhell said:
Add the darkstar theme to not working as well. It put it in a permanent loop
Click to expand...
Click to collapse
Added a note to the OP about this. Thanks!
aqtrans said:
Version 1.2 posted!
Click to expand...
Click to collapse
Suggestions for 1.3
- Remove /system/etc/wifi/wlan.ko (not needed)
- Replace wlan.ko /system/lib/modules/wlan.ko with the attached version (I believe it works better for Polaris users)
I was about to suggest increasing the wlan scan interval but I noticed that you hade allready done that.
I've had problems with builds that have sensors.msm7k.so all by itself so I added the sapphire sensors before I installed v1.1 as a precaution but I'll try without doing that once I reinstall with v1.2 and I'll let you know how it goes.
This is a legend port, aiming to be a clean Sense 2.2 release with at least all hardware stuff working. The camera is a tough cookie and for now I can't get it to work. Might find time to continue to work on this in the future, but it will take time if ever.
Native (froyo) app2sd should work for apps which support it. Old school app2sd should work if you have a ext2/3/4 partition.
Default speed is 614/352 (smartass) - use SetCPU or similar app to change this.
Download:
Sengle-0.7.2 (Multiupload)
Sengle-0.7.2 (Desean)
Instructions:
I have flashed this over my old version (Sengle 0.7) and it seems to work fine.
If you have problems which are not in the known issues, you might want to try to do a full wipe (data, cache and ext partition) and install it cleanly.
Note: even if you do not wipe anything the dalvik cache is rebuilt, so the first boot will be very slow - have patience. Additionally, I had one restart of the sense and sound not working on the first boot. It was fixed after the second reboot.
Changes:
- Compcache enabled (should help avoid sense reloading)
- JIT enabled
- Wifi hack cleaned up (no more "error" when disabling wifi)
- RTL fix updated (also fixes Gmail and such now)
- Reboot menu (same one that was optional in 0.7)
- Cleanups by Elelinux for the setup wizard and widgets, as well as the identity of the hero and keypad.
- New install script by Elelinux
Regarding JIT: I have enabled JIT, even though the legend official sense, which this ROM is based on, is not built for sense.
HTC, wakeup! JIT was added in 2.2, and today 2.3 was released....
Anyway let me know if you find any trouble with this.
Known Bugs/Problems:
OpenGL issues
Camera
Wifi hotspot
LWP
Google navigation exits when showing the map, GPS Status exits randomly, Google Sky Map fails to load
Sound with navigation programs (or something like this)
Voice recorder says storage full.
Notification lights problems (I thought I got this one working )
Let me know if you find any further/new major problems (not just another 3rd party which does work)....
Future
For now I have given up on the major problems with this ROM. I will try to find some time to get back to this in the future but I'll be surprised if there is another update any time soon (I have a lot on my plate right now both in hero/android development and in RL).
History
Sengle-0.7 (Multiupload)
Sengle-0.7 (Desean)
Reboot Menu (included in 0.7.2)
RTL Fix (superseded by new fix in 0.7.2)
Compcache enabler (included in 0.7.2)
Thanks
This ROM is based on the MoDaCo r4 release for the legend. It was prepared in collaboration with capychimp and seo, and much of this port is thanks to them . Some cleanups and fixes by Elelinux (also install script ).
Cool dude! Trying it out now!
Oh no.. me second.. anyways will check this out now
Edit:
Flashing took a while but booted just fine.
camera is not working as stated
Wifi connected brilliantly and displayed my network tmobile uk. so looks good
I dont do app2sd so cant comment on that
will try this tommorow and let you guys know
I think Erasmux and Ele should join forces.. you both can do wonders for us poor Hero guys
Keep up the good work and thanks a million !!
I hope I won't regret, not reserving the second post....
erasmux said:
I hope I won't regret, not reserving the second post....
Click to expand...
Click to collapse
Hehe I was a little too quick there?
flashing!!! thanks for all your work erasmux, something new to highlight compared with bihariel's froyo sense?
carlospiles said:
flashing!!! thanks for all your work erasmux, something new to highlight compared with bihariel's froyo sense?
Click to expand...
Click to collapse
I think BT audio is one thing.
What are the big problems with bihariel's froyo sense other than BT audio and camera (which is still broken )?
But do note, this is a completely different build. bihariel's froyo sense is based on the Aria port and this is a legend port....
bihariel's froyo is laggy as hell, and froze all the time when i tried it out, so i hope your work is much better
cuz im using your froyo and thats awesome ROM so i expect this ROM is also gut
How does it work? Is it smooth? Is there problem with caller recognisation as in bihariel's Sense? What about battery?
tomekk_nt said:
How does it work? Is it smooth? Is there problem with caller recognisation as in bihariel's Sense? What about battery?
Click to expand...
Click to collapse
Sorry have no idea about any of those. For me its slower than the CM6-based ROMs (like floyo) - but what can you do sense is pretty but slow . Too soon for me to know about battery life.
Let me know if you find any problems (except camera) and I'll see if I can do something about it, although my powers are limited because we don't have sources for sense....
Great news !
I will flash it in the morning and report
Good work !
Sent from my HTC Hero using XDA App
Greetings,
Flashing now to see how it goes,
I have been after 2.2 with sense for some time now but was never sure,
How ever i know you have done some nice work erasmux,
Will report back soon.
Erasmux thank u very much fir this great work. The ROM is really fast. Keep it up..
Have to say Erasmux
On first impressions this is sweet,
No major issues other than the cam,
All else seems to work grand.
thanks for the great work... no major issues so far..
will take it out later and how it performs...
Thanks for the great work! The ROM is really nice!
So far here's what I can see:
- Camera and Wifi hotspot don't work, as you mentioned.
- LWP don't work. Won't even show a preview.
- Google Navigation exits as soon as the map appears.
- GPS Status app (installed from market) exits randomly but sometimes manages to get a fix and keep running
- Much like in the Aria-based ROM there seems to be a problem with the time setting. My region is in DST and when I set the clock to update from the network it keeps changing from DST and back. It seems there is some "fighting" going on where the networks sets the correct DST time zone and something comes along and changes it back to non-DST.
Other than that everything seems fine.
Sensors, keypad backlight, Wifi, calls, 3G data, market, HTC apps and widgets seem to work very well.
Overall it's pretty stable and fast.
The ROM works great except I found after launching several programs, returning to home will see the HTC white screen then restart of Sense home.
btw, the Linpack score is around 2.56 with default CPU clock setting. Is JIT not enabled in Sense 2.2 ROMs?
Thumbs up Erasmux, thanks for this. Slick
Sent from my HTC Hero using XDA App
dsouza42 said:
Thanks for the great work! The ROM is really nice!
So far here's what I can see:
- Camera and Wifi hotspot don't work, as you mentioned.
- LWP don't work. Won't even show a preview.
- Google Navigation exits as soon as the map appears.
- GPS Status app (installed from market) exits randomly but sometimes manages to get a fix and keep running
- Much like in the Aria-based ROM there seems to be a problem with the time setting. My region is in DST and when I set the clock to update from the network it keeps changing from DST and back. It seems there is some "fighting" going on where the networks sets the correct DST time zone and something comes along and changes it back to non-DST.
Other than that everything seems fine.
Sensors, keypad backlight, Wifi, calls, 3G data, market, HTC apps and widgets seem to work very well.
Overall it's pretty stable and fast.
Click to expand...
Click to collapse
Thanks for the report, removed the question marks from the known bugs you verified .
fancyhe said:
The ROM works great except I found after launching several programs, returning to home will see the HTC white screen then restart of Sense home.
btw, the Linpack score is around 2.56 with default CPU clock setting. Is JIT not enabled in Sense 2.2 ROMs?
Click to expand...
Click to collapse
Sense (even 2.2) is not compatible with JIT.
Just flashed. No problems and easy setup. Excellent ROM on first impression. Just the camera problem. Very fast, slick and excellent!
Many thnaks for this!
I got some time to develop for the Hero again this week. The result is working camera on ICS.
ROM-developers who wants to use this can just place the library in /system/lib/hw. You will also need the proprietary camera libs in /system/lib/.
Although this works, it isn't very stable. The longer the camera app is running the slower it gets and after a while the whole phone will just stop responding.
Update, I removed support for barcode scanner. That turned out to be leaking tons of memory. With this new version I could take 4 pictures in a row and keep the camera running for like 3 minutes.
Download link: http://www.mediafire.com/?fp7tryck4qsh1zu
Good job.
Will be included in the next ics release . I'll wait for @jordfaz to build it with las venturas included and then i'll try to make a new release
What are the thoughts on why it is running slower? Got any leads?
riemervdzee said:
What are the thoughts on why it is running slower? Got any leads?
Click to expand...
Click to collapse
Well, it's using the dirty HAL hack. I'm guessing it'll always be a bit slower than a native ICS driver. It also spits out like 10 messages per second in the log, can't be very good for performance. I'll try to disable the logging. However, I feel that there got to be another reason for the complete freeze. Some memory leak or something.
I've updated this. It's way more useable now. Doesn't freeze after 30 seconds
This is just fantastic! This, in combination with the MemoryHeapBase patch did the trick!
Thank you!
I was told that these where the source code of CM12.1. I'll share it with you:
https://github.com/s0be/android_device_letv_x1na
https://github.com/s0be/android_vendor_letv_x1na
https://github.com/s0be/android_kernel_letv_msm8994
I don't know any news of kernel source code release by LeEco.
Let's see if, with subforum on XDA-Developers we have more ROMs coming up, hope so.
From a Chinese bbs
There has been indeed something going on since November on this front
http://bbs.ydss.cn/thread-598321-1-1.html
It seems like there is still a bug at the camera level. Hopefully something will be released soon, also with instructions in English.
i9o said:
There has been indeed something going on since November on this front
http://bbs.ydss.cn/thread-598321-1-1.html
It seems like there is still a bug at the camera level. Hopefully something will be released soon, also with instructions in English.
Click to expand...
Click to collapse
yeah I know, but I think the source code on this is newer.
new version. Seems gps, wifi, heating and other issues have been fixed or at least working better.
http://bbs.ydss.cn/thread-635136-1-1.html
another one, seems more recent. Don't know if it's better tho.
http://bbs.le.com/thread-1692751-1.html
Amazing ROM the one posted right above, I suggest it to all of those who are missing the Cyanogen/Slim.
I will use it as daily driver even if the EUI6 will come out (i guess it will still be better than EUI)
PROS:
1. Cyanogen
2. Really smooth
3. Good battery
4. Good GPS (fastest seen to me)
CONS:
1. Black screen from time to time when closing an activity (nothing major)
2. Wifi is terribad imho --> i'll try WCNSS fix
3. Sometimes i need to double press the power up button to turn on the screen
4. d2tw is not working, d2ts is but only in the status bar (hw home button can be enabled as well)
5. AudioFX crash (intentional?)
6. Dolby Atmos how do you use it??!?
7. There is an app to let the flash blink when a notification is received, personally i dont like it. Green/Yellow/Red led is not working (any workaround?)
Suggestions:
Use root explorer to remove chinese apps (baidu, sugoisearch), i didnt uninstall collapseromer app though. Before doing so install google keyboard.
Default APN may be the wrong one, hence no connectivity.
hi man,
they are 3 links, which is kernel source ?
Have you got CM13 kernel source ?