Hello All,
I have GPE version of GPad running Kitkat 4.4 Stock ROM. Last month I have used following link to enable chromecast mirroring. Due to the issues i have uninstalled superuser app and did factory reset. After that all well! I mean no issues with tablet.
http://forum.xda-developers.com/har...experimental-enable-mirroring-device-t2812193
Yesterday I tried to sideload the GPE lollipop update but prompted with following error.
"/system/etc/audio_policy.conf" has unexpected contents.
E:Error in /tmp/update.zip
(Status 7)
Installation aborted.
This morning I saw system update notification for Lollipop upgrade and opted to install it, but without any further msg during the system update it prompted with "Error!" After that I did factory reset. When it reboots starts optimizing 48 apps, but it prompts with following sequence of messages:
"Unfortunately sun beam has stopped. "
None of the apps loaded , no access to setting, just empty screen and on screen buttons at the bottom.
I spent quite some time looking around in xda to restore back to factory, none seems to work.
1. Tried flashing original stock .tot file, getting "Download user image is only available in the online environment!!
2. adb sideload, "/system/etc/audio_policy.conf" has unexpected contents
3. To Flash TWRP i am not getting access to setting to enable USB debugging.
Now i cant even put the G Pad in adb as i dont have access to settings to put in USB debug mode. vol down+power puts into bootloader, but cant access to adb commands.
Now I can only access to recovery and do sideload. but i am stuck with "/system/etc/audio_policy.conf" has unexpected contents error. Can someone share kitkat original version of audio_policy.conf? also how i can replace the exiting file as i dont have access to adb?
Greatly appreciate your help to bring back the G Pad.
regards
Raj
You can boot twrp from fastboot and flash either 4.4.4 or 5.0 back onto your tablet. Look at the thread in Android development for more details on flashing the stock images using twrp
Thanks! I was able to get back to kitkat with following method. I was able to flash recovery its now back to complete stock kitkat now.
http://forum.xda-developers.com/lg-...510-gpe-4-4-4-ktu84p-l002-stock-twrp-t2797883
After this I got system update notification to lollipop. Again got "Error!" msg during the install process.
I tried adb side load, got following error!
failed to verify whole-file signature
signature verification failed
installation aborted.
Any thought whats going wrong there?
Hello,
I've been trying to install CM13 with gapps using TWRP (using fastboot boot, because my device is S-ON), and though cm goes through ok, flashing gapps returns Updater process ended with error: 2 and I can't seem to be able to google this problem out. Anyone knows what that means or where I can find TWRP error code meanings?
nvm, was wrong platform gapps
I'm trying to replace the stock ROM on my phone in an attempt to find out if another ROM has fixed a set of really annoying bugs present in stock. My phone is running the latest OTA from OnePlus (ONEPLUS A3000_16_170610).
I've followed the following steps:
Flash the latest versions of TWRP and SuperSU. Reboot several times.
Disable lockscreen security.
Boot to recovery and do a full backup.
Reboot and copy new ROM and Gapps to /sdcard.
Reboot to recovery.
Wipe dalvik, system, data, and cache.
Attempt to install the ROM. At this point, I get the following error:
Code:
Checking for MODEM build time-stamp 2017-06-27 21:43:31
assert failed: op3.verify_modem("2017-06-27 21:43:31") == "1"
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/RR-N-v5.8.4-20170806-oneplus3-Official.zip'
This example is using the latest Resurrection Remix ROM, but I've also gotten the exact same error from the latest LineageOS.
What's wrong?
https://forum.xda-developers.com/on...t/op3-op3t-unofficial-lineageos-14-1-t3588696
Welcome to the world of ppl who can read before they flash ^^ jkjkjkjkjk
No matter what i do im unable to install lineageOS on my razer phone, constantly getting "update error: 255".
All the guides just say click install and select the zip and it never works.
What recovery are you using?
Can also confirm this is a current issue. Using TWRP 3.2.2-0
I had the same problem with TWRP. Switched to Lineage recovery instead and everything went smooth.
Hi, I'm new here. I did some searching and couldn't find any answers regarding my problem exactly. I'm using TWRP to update my Nexus 7 2013 (flo). I have been successful in the past - as recently as yesterday. Something happened along the way and now I only get an error when attempting to flash ROMs.
I have been trying Lineage 16 and 17.1. I did do the repartition, but I get the same error on both ROMs:
Installing zip file '/sdcard/Download/lineage-17.1-20200803-UNOFFICIAL-flo.zip'
Checking fir Digest file...
Warning: No file_contexts
Target: google/razor/flo:6.0.1/MOB30X/3036618:user/release-keys
Patching system image unconditionally...
E1001: Failed to update system image.
Updater process ended with ERROR: 7
Error installing zip file /sdcard/Download/lineage-17.1-20200803-UNOFFICIAL-flo.zip'
Updating partition details...
...done
I have tried to edit the text to eliminate the "asserts" - no help. I downgraded TWRP one version, no help. What else can I do. I'm pretty much a noob when it comes to this, and I'm willing to "hold hands" to get a solution if there is one. Thanks!
ericdudeus said:
....I have tried to edit the text to eliminate the "asserts" - no help. I downgraded TWRP one version, no help. What else can I do. I'm pretty much a noob when it comes to this, and I'm willing to "hold hands" to get a solution if there is one. Thanks!
Click to expand...
Click to collapse
In TWRP go Advanced Wipe and wipe system/data/cache/dalvik before installing the ROM.
If it still does not work and you wish to investigate it, please 'install' this zip in twrp, find 'logs.tgz' in the root of internal storage and post it here.
If you just want this ROM installed ASAP then do:
RESTOCK (select repartition to original factory layout)
CROSS
:fingers-crossed:
Thank you! I actually started over - completely wiped the tablet, repartitioned it, flashed the ROM, and Gapps, and it's fully functioning again. It just didn't like something in the process before, I guess.
k23m said:
In TWRP go Advanced Wipe and wipe system/data/cache/dalvik before installing the ROM.
If it still does not work and you wish to investigate it, please 'install' this zip in twrp, find 'logs.tgz' in the root of internal storage and post it here.
If you just want this ROM installed ASAP then do:
RESTOCK (select repartition to original factory layout)
CROSS
:fingers-crossed:
Click to expand...
Click to collapse
Hi,
i have too this problem.
I wipe everything, flashed the repartitioning zip and still havoc 3.3 cannot be flashed. What i have to do? thanks
The solution for me was to just completely wipe the storage - everything, and start over. Once wiped, I repartitioned, flashed the ROM (I used Resurrection Remix), and then GApps. The tablet seems to be fully functional at this point, but it's showing its age.
Good luck!
ericdudeus said:
The solution for me was to just completely wipe the storage - everything, and start over. Once wiped, I repartitioned, flashed the ROM (I used Resurrection Remix), and then GApps. The tablet seems to be fully functional at this point, but it's showing its age.
Good luck!
Click to expand...
Click to collapse
It's tell me E: eroor creating fstab
k23m said:
In TWRP go Advanced Wipe and wipe system/data/cache/dalvik before installing the ROM.
If it still does not work and you wish to investigate it, please 'install' this zip in twrp, find 'logs.tgz' in the root of internal storage and post it here.
If you just want this ROM installed ASAP then do:
RESTOCK (select repartition to original factory layout)
CROSS
:fingers-crossed:
Click to expand...
Click to collapse
I ran the logging zip. My log.tgz is here: https://abar.duckdns.org/s/aywJagDNJDxfiyL
thrilway said:
I ran the logging zip. My log.tgz is here: https://abar.duckdns.org/s/aywJagDNJDxfiyL
Click to expand...
Click to collapse
OK, the relevant error is...
Code:
erasing 18342 blocks
BLKDISCARD ioctl failed: Invalid argument
failed to execute command [erase 4,223772,228864,229950,243200]
new data receiver is still available after executing all commands.
script aborted: E1001: Failed to update system image.
E1001: Failed to update system image.error: 1001
Updater process ended with ERROR: 7
It seems your eMMC hardware version is <4.4
But RESTOCK should work.
Thanks, but I'm running a linux desktop, so I can't really run RESTOCK. Is there a guide somewhere to run the commands in RESTOCK manually?
EDIT
I've reviewed your logs. For the custom ROM to work you need repartition. Install sysrepart-max.zip then reboot and now install the ROM. If gapps are needed, use pico.
It worked! Thanks
k23m said:
In TWRP go Advanced Wipe and wipe system/data/cache/dalvik before installing the ROM.
If it still does not work and you wish to investigate it, please 'install' this zip in twrp, find 'logs.tgz' in the root of internal storage and post it here.
If you just want this ROM installed ASAP then do:
RESTOCK (select repartition to original factory layout)
CROSS
:fingers-crossed:
Click to expand...
Click to collapse
Thank you so much! It worked perfectly. In the beginning it didn't work, I just reboot the device after wiping system/data/cache/dalvik, then tried again to install the ROM, Now my device has the new ROM working without problem.
Getting error 70 in twrp when installing Opengapps (pico) even BitGapps
Hi, I have the Error 7 Problem with my Nexus 10 Using newest TWRP Recovery and trying to install Lineage 17.1 unoffical. Generated the logs.tgz file - which you will find encllosed. Hope anyone could help.
Thanks a lot in advance!
BlackVoltage said:
Hi, I have the Error 7 Problem with my Nexus 10 Using newest TWRP Recovery and trying to install Lineage 17.1 unoffical. Generated the logs.tgz file - which you will find encllosed. Hope anyone could help.
Thanks a lot in advance!
Click to expand...
Click to collapse
This is a Nexus 7 forum, not Error 7 forum, lol.
The error indicates a too small 'system' partition and you need to enlarge it. You will find a solution on Nexus 10 'manta' forum.
Ok thanks - I did not see that at first. My fault. Do you know a special Error 7 Nexus 10 Forum? Or am I just right here?
[ROM][LineageOS][17.1][UNOFFICIAL][Nexus10]
LineageOS lineage-17.1-20230404-UNOFFICIAL-manta.zip Known issues: - Pls disable "Adaptive brightness" in display settings -> sensor service problems. - GPS is not working and has been disabled completely - NFC is not working and has been...
forum.xda-developers.com