Yesterday suddenly my phone just deny to work with touch screen. I try hard reset with update.zip. I try clear data with button combination. I wonder what can be the cause? Is there anyone with the same problem? I wonder if i change the touch screen what will happen? Because the screen is not broken, i didnt hit the phone. The touch stopped just when it was with screen off. I hit the power button to wake it up, and then cant swipe.
Yes unfotunately mine as well. It happened 1 year ago, touchscreen used to work randomly. So I sent it back to China, but it was working perfectly.
After getting it back it worked for 1 month, and since impossible to do anything. Without touchscreen no TWRP, no backup possible, no flash.
It's a brick now and it is no guaranteed anymore. I lost my money my time and my nerves.
So sorry for you but I don't think you'll manage to fix it. I think it's an hardware issue.
You can try use OTG cable and a mouse.
Mine touchscreen have an row in the middle, with about 1 centimeter that don't recognize the touch, all the rest work perfect. With a mouse, work all.
Mine stopped working one morning. I left the phone on the bedside table and the next morning the touch screen didn’t work..that’s all…the screen is fine, I didn’t have any accident with it...
It was 4 months ago.. I tried everything I could to revive the phone, but I couldn’t.. so I bought a new phone, from different brand obviously
Good luck with yours!
Related
ok so i searched on the sites for a fading to a white screen problem but it looks like its related to the dpad... my phone was really low on battery last night it kept beeping continuously... so by the time i got to plug it in the screen started to fade to white... now the screen has vslight vertical lines and every time i shut off the phone with the power button and turn it on it comes normal but as soon as u touch the screen it fades to white!!! was this caused by the low battery. i fully charged it but still have the same prob. i tried clearing my storage and that didn't help..what do i do?
white screen
you will need to replace the board for the dpad.
ok thanks. is this the same issue that others are having as well? the wierd thing is half the time it works the other half it doesnt...
I had a similar problem. I had pressed the power button to check the time and screen was white! SR rebooted and after the first splash screen the screen faded to white. I finally founded a product called Pocket Controller http://www.soti.net/ (trial ver works fine) that allowed me to see my phone on my computer. I was then able to backup my data to the storage card. I reflashed the phone and it’s worked fine afterwards.
yeah man thats what happened to me exactly... im reflashing the official wm6 rom now... ill post what happens... thanks
Silverexp said:
I had a similar problem. I had pressed the power button to check the time and screen was white! SR rebooted and after the first splash screen the screen faded to white. I finally founded a product called Pocket Controller http://www.soti.net/ (trial ver works fine) that allowed me to see my phone on my computer. I was then able to backup my data to the storage card. I reflashed the phone and it’s worked fine afterwards.
Click to expand...
Click to collapse
damn it didnt work with me my screen still goes in and out when it chooses to. and it is my dpad b/c it stops working when the screen is gonna go..
Hi,
Try tightening the screw behind the red hang up button on the dpad. There is a component behind there which causes this problem. If tightening doesn't work try loosening. It's all to do with the pressure on the chip. Very odd problem.
Also try squeezing the bottom right hand corner of the phone and SR.
Bonkers solution for a bonkers problem but it certainly fixed one of mine.
Good luck!
yes, the screw tightening/unloosing thing works for me. same thing happened when i dropped my unit. i even completely dismantled it (managed to fix the microsd card spring). something loose with the connections.
niec guys thanks... i will try the tightening and loosening the screw... i tried holding down the bottom right and SR didn't work but thanks anway... i guess i have to buy a screw driver to open this thing up... god i remember when i had to take apart my mpx 220 im getting flashbacks!!!
Had exactly the same problem but mine was due to an phone shop employee dropping it. It would do exactly the same as yours. Sometimes it would work fine and once when I reflashed it the problem went away for a few days but if came back.
I used to control it using Soti pocket controller but them migrated to Net Support as that allowed me to control over wifi. In the end had to get it replaced.
Hi All,
I have the CDMA version of the Rhodium and happen to be in Europe right now. After a few calls to Verizon I have been using voice and data successfully for the past few days.
Last night after dinner however, I realized my phone appeared frozen and unresponsive via the touch screen. I powered down the phone using the hangup/power button and powered it back on. Touch screen unresponsive. I Soft-Reset and still same problem. I re-flashed the ROM provided by verizon (Since I couldn't get the send/hangup & power keys to do a hard-reset) and still nothing.
I am fairly certain this was not exposed to any water damage. All keyboard and hard-buttons still remain responsive. Anything I can do to try and resolve this?
BTW: The stickers inside are red--they have been red since probably a week after getting the phone but everything has functioned fine for months -- I blame humidity on the red-sticker part.
Any thoughts here on resolving lack of response from Rhodium Touch Screen?
Thanks in advance.
ardentsilent said:
Hi All,
I have the CDMA version of the Rhodium and happen to be in Europe right now. After a few calls to Verizon I have been using voice and data successfully for the past few days.
Last night after dinner however, I realized my phone appeared frozen and unresponsive via the touch screen. I powered down the phone using the hangup/power button and powered it back on. Touch screen unresponsive. I Soft-Reset and still same problem. I re-flashed the ROM provided by verizon (Since I couldn't get the send/hangup & power keys to do a hard-reset) and still nothing.
I am fairly certain this was not exposed to any water damage. All keyboard and hard-buttons still remain responsive. Anything I can do to try and resolve this?
BTW: The stickers inside are red--they have been red since probably a week after getting the phone but everything has functioned fine for months -- I blame humidity on the red-sticker part.
Any thoughts here on resolving lack of response from Rhodium Touch Screen?
Thanks in advance.
Click to expand...
Click to collapse
Same here .. Did you find anyway to get it working?
I hope someone might actually help me out with this. I used my phone perfectly good yesterday, tonight, i put it on standby, and go to bed. Woke up in the morning, i grab my phone, turn it on from standby mode, everything's fine, but digitizer is not answering to my touch. Soft-reset, and try to put pin, but all i get is pressing 1 / 4 / 7 no matter which part of the screen i actually touch. I haven't been flashing it for months, and i had the latest simplicity rom when this happened. Thought it was an alignment problem, so i navigated with keyboard till the align screen, and tried to align. It went in loop, as soon as i pressed the last align point, it went back to the first point, without letting me exit. Tried to re-flash with a stock rom, same problem. Tried to re-flash with an energy rom, same problem. Anyone got any ideas of what the hell happened?
May be some condensation/moisture in between the outside screen and the touch screen. This happens to me all the time when its in my pocket and its hot out. Try using your finger nail, or something, to go around the edges of the screens plastic. It will let moisture escape.
Good luck.
If started reading comics on my nexus 7 2013 32Gb with perfect viewer recently. And twice today after reading for an extended time (over an hour)the touch Screen stopped responding. Everything else seemed to work but not the touch screen. Holding down the power button and rebooting has it working again.
Anyone else have this issue or should I send it in for repair?
I'm still all factory.
Is this the same? http://forum.xda-developers.com/showthread.php?t=2497017&highlight=freeze
No, I don't think so
Mine stops completely has not come back after 5 minutes I have touch trace on so I can see when I touch the screen normally. It can go to lock screen and still have no input. Never happened before now even though I have used it extensively at other times. But this is the first time I've had only one program running for over an hour with minimal touch input.
I have had my Moto 360 for just over a week. For the second time the touchscreen stopped functioning. First time I resolved by turning it off (very long press hardware button) then left overnight and it was fine in the morning. Turning it off and back on again didn't help. Couldn't factory reset because no touchscreen.
Second time is now.
Does anyone else have this problem? Any clues how to resolve?
Thanks.
Edit: After left off for a while (instant off and on doesn't work) it is fine now. Anyone have any clues or better suggestions how to fix?
spanielhead said:
I have had my Moto 360 for just over a week. For the second time the touchscreen stopped functioning. First time I resolved by turning it off (very long press hardware button) then left overnight and it was fine in the morning. Turning it off and back on again didn't help. Couldn't factory reset because no touchscreen.
Second time is now.
Does anyone else have this problem? Any clues how to resolve?
Thanks.
Edit: After left off for a while (instant off and on doesn't work) it is fine now. Anyone have any clues or better suggestions how to fix?
Click to expand...
Click to collapse
Yes mine has done it two or three times since the last OTA update, nothing I did to the screen had an effect, had to reboot the watch to recover.
teslabe said:
Yes mine has done it two or three times since the last OTA update, nothing I did to the screen had an effect, had to reboot the watch to recover.
Click to expand...
Click to collapse
Mine doesn't recover immediately on a reboot but it is nice to know I'm not alone in the problem. It's better to know that you've only had this problem since the OTA. That means it can be fixed in software. Thanks.
Same here
Lost "touch" today on mine. Had the 360 for about 4 weeks and not seen the problem until now. Wasn't even sure how to turn it off until I saw "very long press" - thanks!
Turning mine back on straight away was fine so it was just a turn it off and back on thing. Frustrating, but I'm glad it's a software bug rather a touch screen fault, that would be a real pain. Hopefully, if it's a bug it will be fixed.
i think.....
I think this happens when the moto 360 is not set on your wrist
Ddoes anyone solve this issue ? My new moto 360 touch screen doesnt work at all. So i can choose any language in initial setup
This problem Occurs when no static energy is given to the case of the moto360. As soo'n as You touch The Iron ring The touch Will work. Release it and it Will stop working. Ik think The touch screen works rather like a conductive layer between the back of the watch and the screen it self in which the skin gives the energy needed to control the screen. When the back of the watch isn't connected to skin the touchscreen completely stops working.
In video you see what happens
https://youtu.be/KpQ-dqWYO6s
Mine did this too, however I broke my screen ordered a replacement and haven't had the issue since. When mine quite working if I triple pressed the power button it lock the screen then pressing the power button it would turn on and work though. Sometimes it wouldn't come right back on like it froze or something.
Sent from my Nexus 6 using Tapatalk
I've been having this problem too, it's more like my weekend watch but last week i noticed that it wasn't responding and i thought it could be a RAM issue. I've done multiple reboots and it doesn't work.
There was only an occasion where i left it overnight till it almost drained completely and it worked again, and then it started freezing again.