Develop Bugs

Review: iFeel Tempered Glass Protector

Today I received a package from Korea with iFeel screen protector. After unpacking, I saw a envelope green and white box with a photo iFeel Galaxy s3 and specification of tempered glass iFeel and the manufacturer's website (all in Korean) - www.ifeelglass.com .
At the front of the packaging has been specified specification:
a) Mighty screen protection (10H)
b) Screen crack prevention
c) Shatter-proof
d) Anti-scratch
e) Anti-Firgerprint
f) anti-bacterial surface
g) Secured durability
h) EAsy attachment with self-air-bubble-removal
i) Ultra-clear High definition
j) Perfect Performance of Touch Screen
(So ​​says the packaging is that the glass is also resistant to acids, alkalis and temperature fluctuations). I did not wait for anything, and immediately sat down to check what is inside. Packaging of the two parties was covered with hologram seal manufacturer. When opened in the inside can be found:
a) iFeel glass packed with extra packaging, in which so much was quick installation guide.
b) small book manual
c) small microfiber cloth
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After opening the package I took out my iFeel glass, which at first glance seemed to be quite thick and tight stiff. After a while I noticed that it is not so rigid as it seems. They can be slightly bent in different directions. I immediately noticed that the glass with a white frame (the ordered) does not cover the entire front of the phone and the cover a little more than my earlier part of the film's simple Puro. All holes (home button, sensors, front camera and light, and cut the letter "Samsung") have been precisely cut. I started the installation. That's what I always do when applying foil and other such things on the phone's screen is good infusions bathroom. In the steamy room dust particles do not "fly" to prevent build-up of dust particles on the screen (if formed micro-bubbles, etc.).
After misting the room I took off my previous film, I cleaned screen carefully and thoroughly with a cloth and installed the glass.
I can not remember when the last time I was able to easily put the film on the screen. The whole took a few seconds and a single air bubble dust or pollen. After applying I tighten glass with cloth that was included.
All very well be imposed. All holes are perfectly matched, nothing was hidden (like the pictures). After removing the protective film has a whole was not so thick. After application can be seen that the glass is thicker than the film (although it is just to protect). It looks very nice, nicely, only the home button is slightly recessed (industry purchase aluminum sticker case) but can easily push it. Sticker available on eBay for $ 5 should completely resolve the problem. Before buying, I read on the forums that the glass is almost identical (according to some people suspect the same factory) as the version of SGP tempered glass, which is also produced in Korea. People complained that the use of glass SGP is often a problem of sensitivity. Due to the layer of adhesive only on the edges of the sensitivity of the screen
deteriorated and many people gave up the security because of the comfort.
With glass iFeel not noticed this problem. When the screen goes to a finger as if the glass was not there. There are no problems with sensitivity, everything comes naturally, text messages you write very well. I'll report after a few days of use. Compared to the previous film, which I can see some significant improvement in terms of use.There is much less fingerprints as on a normal film, and above all, do not leave "rainbow effect" that occurs when standard films. For this one swipe with a cloth, and the whole is perfectly clean, as new sheet of glass. In the normal film you need a little work to a whole was clean. The same transparency seems to me like the film better. The screen looks the same as the SGS3 without film and slides.
In summary - for the very beginning I was happy with my purchase. I approached the glass skeptical because of the reviews of the similar product of SGP, but watching the interesting movie on Youtube I decided to buy one piece of iFeel. A significant improvement with respect to the film normal at the expense of slightly greater thickness (0.4-0.6 mm). My family members at first glance, did not notice that it is glass on display. When the phone is inserted into Slim Cover Case Samsung it looks very nicely. You can only purchase a sticker on the "home" button - not everyone has to like the feeling of touch without sticker. If a glass will proof his parameters like on Youtube, I can be considered as one of the best accessories for your phone.
Links:
www.screenprotector.kr
ebay - blue version -> http://www.ebay.com/itm/Samsung-Gal...389143?pt=PDA_Accessories&hash=item4abc479a97
ebay - white version -> http://www.ebay.com/itm/Samsung-Gal...445800?pt=PDA_Accessories&hash=item4abc4877e8
home button sticker ->
http://www.ebay.com/itm/Colorful-Al...501&pid=100015&prg=1006&rk=3&sd=320986389143&
http://www.zoarah.com/other-accessories/

I'll wait for your update as far as sensitivity issues... looks promising though
Sent from my GS3 using Tapatalk 2

How about the proximity sensor? Any problems with that?
Sent from my SGH-T999 using xda app-developers app

No problems with proximity sensor. It works very good.

darkkain said:
No problems with proximity sensor. It works very good.
Click to expand...
Click to collapse
Nice! Thanks for the quick reply! Gonna have to get this then!
Sent from my SGH-T999 using xda app-developers app

Any link for order? it seams that web page is under construction or it is down...
@edit I found it on another subtopics....

I added links to first post.

Great review! Looks promising but looks so much alike SGP glas, and I'm afraid sensitivity issue might still exists depending on users. Before I make final decision I'll wait for some more customer reviews. Keep us updated op, ty!
Sent from my GT-I9300 using Tapatalk 2

Thanks for the review. I would like to know where to get that little sticker for the home button, can someone provide a link, not sure what to search on.
Thanks

I had the SGP tempered glass on my Note and it was pretty nice, but since the S3 has a raised button I think I will have to pass on this one...

Hopefully someone managed to order the "fully clear" one, I dislike the super-imposed capacitive keys

@op
thanks for the review, there is a few question I need to ask, can you confirm the colour part, is the paint work on the top of the glass or the bottom, I asked because I want a all clear one, and this is not available.
You did mention that the glass is acid resistant, so I was thinking of using some acid of some sort to remove the colour part, may be thinner.
that if the the info is true and add adhesive for full coverage.
If it turns out bad it's only USD 30 or something wasted, still considering this, sgp or xgear for this mod.
can anyone also confirm the paint work is on the top/bottom on the xgear or sgp.
thanks

kms108 said:
@op
thanks for the review, there is a few question I need to ask, can you confirm the colour part, is the paint work on the top of the glass or the bottom, I asked because I want a all clear one, and this is not available.
You did mention that the glass is acid resistant, so I was thinking of using some acid of some sort to remove the colour part, may be thinner.
that if the the info is true and add adhesive for full coverage.
If it turns out bad it's only USD 30 or something wasted, still considering this, sgp or xgear for this mod.
can anyone also confirm the paint work is on the top/bottom on the xgear or sgp.
thanks
Click to expand...
Click to collapse
Bottom on the SGP.

kms108 said:
@op
You did mention that the glass is acid resistant, so I was thinking of using some acid of some sort to remove the colour part, may be thinner.
that if the the info is true and add adhesive for full coverage.
thanks
Click to expand...
Click to collapse
I checked it and it's like the white fabric is inside the glass. But I'm not sure for 100% because I have already intalled it.

darkkain said:
I checked it and it's like the white fabric is inside the glass. It's special manufacturing process.
Click to expand...
Click to collapse
so it's not on the underside, but inside sandwiched in between.
thanks

kms108 said:
@op
thanks for the review, there is a few question I need to ask, can you confirm the colour part, is the paint work on the top of the glass or the bottom, I asked because I want a all clear one, and this is not available.
You did mention that the glass is acid resistant, so I was thinking of using some acid of some sort to remove the colour part, may be thinner.
that if the the info is true and add adhesive for full coverage.
If it turns out bad it's only USD 30 or something wasted, still considering this, sgp or xgear for this mod.
can anyone also confirm the paint work is on the top/bottom on the xgear or sgp.
thanks
Click to expand...
Click to collapse
Xgear has paint at the bottom, but if you remove paint you lose adhesive as well.
Sent from my GT-I9300 using Tapatalk 2

zen0s said:
Xgear has paint at the bottom, but if you remove paint you lose adhesive as well.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
i'm sure i'll find some adhesive made for these from china.
thanks.

reapur said:
Thanks for the review. I would like to know where to get that little sticker for the home button, can someone provide a link, not sure what to search on.
Thanks
Click to expand...
Click to collapse
I added link to stickers to the first post.

jasvncnt1 said:
Yes Dad.
OP Thanks for taking the time to do the review. Think Ill pick one up now and try it out.
damn..forgot to quote the entire first post..
Click to expand...
Click to collapse
Lol what a c___k head lol
Sent from my GT-I9300T using xda premium

darkkain said:
I added link to stickers to the first post.
Click to expand...
Click to collapse
you can also add this link, these buttons are the same size of the S3, the other one's you listed are little smaller.
http://www.zoarah.com/other-accessories/

Seidio vitreo, beefy screen protector.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.seidioonline.com/ProductDetails.asp?ProductCode=SPTSSGS3-BK
This product is compatible with our ACTIVE® and ACTIVE® with Metal Kickstand. It is not compatible with our SURFACE™, CONVERT®, OBEX™, or Innocell/CONVERT® Plus and is not guaranteed to be compatible with other manufacturers' products.
Seidio's VITREO™ is a tempered glass material that utilizes advanced technology to shield and protect your Samsung Galaxy S III's screen. Made from a high grade glass with a 9H hardness rating, VITREO™ is shatterproof, allowing it to absorb impact and prevent damage from occurring to your screen. The VITREO™ surface feels just like the device's screen without interfering with touch sensitivity or optical clarity while giving you an extraordinary level of protection. The design and lightweight material will provide peace of mind no matter what comes in contact with your device.
- High grade tempered glass with a 9H hardness rating prevents damage in the event of scratches and abrasions
- Tapered (rounded) edges provide a premium and more aesthetically enhanced profile for your device
- Engineered to reinforce the strength of the critical points of impact which results in prolonged durability
- Oleophobic coating resists marks and smudges with advanced technology that reduces the appearance of fingerprints
- Full panel protects the entire screen without leaving any portion exposed
- Promotes touch sensitivity and enhances optical clarity
- Easy installation without bubbling and lifting
- Only 0.55mm (0.02in) thin
Contains:
- VITREO™ Screen Guard
- Microfiber Cloth
- Alcohol Wipe
- Plastic Pick
- 4 Home Button Stickers
Click to expand...
Click to collapse
I have preordered, and shall review as soon as it comes in.

wow wow wow $40....

scarrmrcc said:
http://www.seidioonline.com/ProductDetails.asp?ProductCode=SPTSSGS3-BK
I have preordered, and shall review as soon as it comes in.
Click to expand...
Click to collapse
would love your feedback after a couple days/weeks use as the spigen version has poor feedback regarding the touch response... I def want one, but i need my devices responsivness

crazaytalent said:
would love your feedback after a couple days/weeks use as the spigen version has poor feedback regarding the touch response... I def want one, but i need my devices responsivness
Click to expand...
Click to collapse
I just got mine today and from initial impressions, touch responsiveness appears to be completely unaffected.
And the oliophobic coating seems almost magical at dealing with my fingerprints.
Need to figure out something about the home button though. This thing is quite thick for a protector and makes the home button hard to press. Seidio includes stickers to put on it (2 pairs of clear and translucent blue), but they're transparent/translucent and apply a funky cylindrical magnification effect to the brushed metal look of the button which looks really weird and unattractive IMO, so I'm looking for an opaque option.

Bro, still no touch sensitivity issues? Seriously considering this glass screen protector as Spigen has discontinued their version (and they never made a blue one. -__- )

Does this interfere with putting a case on the phone? I have a puregear dualtek that I'm not gettin rid of, I'd hate to buy this and find out I need to choose one or the other.

offgrey said:
Bro, still no touch sensitivity issues? Seriously considering this glass screen protector as Spigen has discontinued their version (and they never made a blue one. -__- )
Click to expand...
Click to collapse
I do have small issues with swipes being mistaken for taps (especially with vertical scrolling), but I had that problem before with no protector and I'm unsure if this has made it worse at all.
Though as for blue, you're SOL here too. You only get black or white.
kingston73 said:
Does this interfere with putting a case on the phone? I have a puregear dualtek that I'm not gettin rid of, I'd hate to buy this and find out I need to choose one or the other.
Click to expand...
Click to collapse
The protector stops ~3mm from the edge of the phone (and in from that is ~1mm of slight tapering). This is sufficient clearance for their active cases (plastic over silicone, like the otterbox commuter line), but they explicitly state it's not compatible with their Surface (just plastic), Innocell (their battery case), and Convert (like an active around the innocell case) cases.
I'm honestly not sure whether your case would fit or not. I could give you some pictures of what this looks like on mine when I have another camera available this weekend.

compro01 said:
I do have small issues with swipes being mistaken for taps (especially with vertical scrolling), but I had that problem before with no protector and I'm unsure if this has made it worse at all.
Though as for blue, you're SOL here too. You only get black or white.
The protector stops ~3mm from the edge of the phone (and in from that is ~1mm of slight tapering). This is sufficient clearance for their active cases (plastic over silicone, like the otterbox commuter line), but they explicitly state it's not compatible with their Surface (just plastic), Innocell (their battery case), and Convert (like an active around the innocell case) cases.
I'm honestly not sure whether your case would fit or not. I could give you some pictures of what this looks like on mine when I have another camera available this weekend.
Click to expand...
Click to collapse
I know they only make black and white with this, but at least I get the choice of a dark glass screen protector with this brand as opposed to Spigen's white only and Spectre's proximity, weird manufacturing pattern on glass problems.
In any case I'll wait for one of the big youtube reviewers to get this glass protector... If they ever will.

Got mine a few days ago when I get around to peeling off my Spigen ill update you guys
Sent from my GS3

I got mine yesterday. I don't notice any difference in sensitivity.
I do notice that it is really heavy. You will need a case with this because it is extremly ugly without a case. The fit is still too small for the screen. You can use a hybrid 2 piece case like the Musubo retro. You will hate having it with the UAG case or anything like that. It will fit but there will be a gap that just looks silly.
The sticker for the home button really cheap.
I purchased mine from Amazon and its going back. Gotta love Amazon.

Got mine today.
Hi Y´all!
Just installed it about 20 minutes ago.
Black was on back order so i ordered the white one.
Thought it would make an interesting contrast to the blue phone & case.
Now - not so sure but it´s too late.
Installation: Hmm - Not as easy as it sounds. At least not to me.
Lined it up with front speaker & home button first.
Problem arose the last couple of millimeters before the actual "contact" with the screen because there weren´t room to get a grab of the edges any more.
It ended up being about 3/10´th of a millimeter off centered at the home button
Won´t correct though. got a clean fit.
In use: Really slick surface. No fingerprints either
Sensitivity takes a hit No two ways around it.
Not much mind you. Subjectively i´d say about 95 % retained.
Is it a problem. Well -- non time critical use is fine - most of the time. Typing is a bit slower.
Temple run 2: Forget it. Just won´t work when one missed gesture is one too many.
I´ll leave it on for a while. Maybe screen sensitivity can be adjusted somhow.
Will post question in Q&A section. Search didn´t reveal anything.
As it is... well ... Close - very close.. but no cigar.
Honestly won´t reccommend it.
I can live with the slightly off alignment. But the sensitivity :crying: Rats - had such high hopes.
Regards
ELO

Everyone still happy with this. Seem to be many complaints on Amazon and want to pull the trigger.
Sent from my Nexus 10 using Tapatalk HD

Case recommendatiom for Le Max 2

Hey guys,
I just ordered a `Black Sandstone Case` from Aliexpress and it just arrived today. Took about 6 weeks till I got it in Germany. Cost me around 6.33euro.
The delivery itself was very nervewracking, because neither the Tracking was really working for China nor for Germany.
Anyways, the case itself looks very good and feels like a high quality material to me. The grip is very good.
Fit tight too.
The only `negative` aspect I can tell is that the case doesnt really fit that well around the cameralense itself. There is nearly no space between lense and case on the upper side, but in comparison `very much` space on the lower side. As the left and right sides are still symmetric, it doesnt really bother me.
Here are some Pics made by an iPhone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I really recommend it for the look, feel and price! :good:

The case looks good. Some shops offered a gift option including earphone, flip case, two type of softcases and a tempered glass.
Choosing DHL delivery reduces your wait time to 9-11 days.

EverPing said:
The case looks good. Some shops offered a gift option including earphone, flip case, two type of softcases and a tempered glass.
Choosing DHL delivery reduces your wait time to 9-11 days.
Click to expand...
Click to collapse
DHL wasnt available for my product but i Got a glass protector with it
But my official leeco tempered glass came a week before, so i dont need it at all.
By the way: i Got a thin and a really thick one in the tempered glass box. Do i have to apply the thin first for better gluing of the thick one? Or just apply the thick one and have an extra one for spare?

I think you apply only one. I guess the thick one feels more sturdy, the thin one might provide better visibility but breaks easier.
katze94 said:
DHL wasnt available for my product but i Got a glass protector with it
But my official leeco tempered glass came a week before, so i dont need it at all.
By the way: i Got a thin and a really thick one in the tempered glass box. Do i have to apply the thin first for better gluing of the thick one? Or just apply the thick one and have an extra one for spare?
Click to expand...
Click to collapse

katze94 said:
Hey guys,
I just ordered a `Black Sandstone Case` from Aliexpress and it just arrived today. Took about 6 weeks till I got it in Germany. Cost me around 6.33euro.
The delivery itself was very nervewracking, because neither the Tracking was really working for China nor for Germany.
Anyways, the case itself looks very good and feels like a high quality material to me. The grip is very good.
Fit tight too.
The only `negative` aspect I can tell is that the case doesnt really fit that well around the cameralense itself. There is nearly no space between lense and case on the upper side, but in comparison `very much` space on the lower side. As the left and right sides are still symmetric, it doesnt really bother me.
Here are some Pics made by an iPhone
View attachment 3791730
View attachment 3791731
View attachment 3791732
I really recommend it for the look, feel and price! :good:
Click to expand...
Click to collapse
Is it smooth or frosted ? A link or buyer name would be great , Please

MadMicro said:
Is it smooth or frosted ? A link or buyer name would be great , Please
Click to expand...
Click to collapse
It is frosted. I am not able to Look for the sellers name atm

Is the case thicker than the camera housing? I want to get a case that is thicker so when I put down the phone the camera doesnt scratch

ZeMartelo said:
I want to get a case that is thicker so when I put down the phone the camera doesnt scratch
Click to expand...
Click to collapse
https://www.aliexpress.com/item/TPU...Max-2-X820-case-with-stand-5/32676359980.html
https://www.aliexpress.com/item/TPU...-Letv-Le-2-Max-X820-case-5-7/32669340508.html

Just want to share with you the view of my brand new skin and bumper by Luphie.

Qron said:
Just want to share with you the view of my brand new skin and bumper by Luphie.
Click to expand...
Click to collapse
Look very nice, link please.

Qron said:
Just want to share with you the view of my brand new skin and bumper by Luphie.
Click to expand...
Click to collapse
I have been trying to locate skins for max 2 but no luck
Please share the link

Skin: https://www.aliexpress.com/item/For...bon-Fiber-Front-Back-Sticker/32718744730.html
Bumper: https://www.aliexpress.com/item/LS0...inum-metal-frame-for-Letv-Le/32676725090.html
As for the skin. There is a peace for FP sensor, but no luck to make it operational when covered. On the other hand, it's made batter than shown on the link I gave you. There is even a sticker for the SIM tray.

Qron said:
Skin: https://www.aliexpress.com/item/For...bon-Fiber-Front-Back-Sticker/32718744730.html
Bumper: https://www.aliexpress.com/item/LS0...inum-metal-frame-for-Letv-Le/32676725090.html
As for the skin. There is a peace for FP sensor, but no luck to make it operational when covered. On the other hand, it's made batter than shown on the link I gave you. There is even a sticker for the SIM tray.
Click to expand...
Click to collapse
Thanks for the link
Is there a way to cover the capacitive buttons in the front
I use on screen navigation buttons so it will annoy me
Also does it come with a screen protector if it doesn't do we have to remove the screen protector already on the device
Thanks again

[email protected] said:
Thanks for the link
Is there a way to cover the capacitive buttons in the front
I use on screen navigation buttons so it will annoy me
Also does it come with a screen protector if it doesn't do we have to remove the screen protector already on the device
Thanks again
Click to expand...
Click to collapse
Since I have silver version of X820, parts for the front have no use for me. The manufacturer hasn't removed inner parts of cut-outs, so if you want to cover capacitive buttons, there is a way.
The set came with screen protector, but I have't tested it out either since I've already aplied one before.

Qron said:
Since I have silver version of X820, parts for the front have no use for me. The manufacturer hasn't removed inner parts of cut-outs, so if you want to cover capacitive buttons, there is a way.
The set came with screen protector, but I have't tested it out either since I've already aplied one before.
Click to expand...
Click to collapse
That is awesome
I am ordering them right now
Wish I had the silver color{not available in india}
Thanks for help
:good::good:

I bought them all
https://www.amazon.com/gp/product/B01GNZ1SHO/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B01LCO9ABW/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
http://www.geekbuying.com/item/Leat...eTV-LeEco-Le-Max-2-Pro-X820-Black-368915.html
http://www.geekbuying.com/item/Leat...ern-For-LeTV-LeEco-Le-Max-2-Black-368911.html

best cases for Huawei P9

This thread is not dedicated to any specific case , this for any case you want to share your experience with it.
For me after trying too many cases , expensive from known brands and cheap ones , I found this case from Ali express "Original MSVII Coque For Huawei Ascend P9 "
https://www.aliexpress.com/item/Ori...32693283790.html?spm=2114.13010608.0.0.oOgFaQ
Perfectly designed for the P9 , very sleek design ,comfortable , too much light and slim ,and too many colors to choose from . I highly recommend this case for protection and design . I choose the fashion black one , look amazing with my grey P9 , now my phone totally black and sexy .
and it is only 4.5 $ .
This my feedback for this case , check other feedbacks from the link above , it take 5 stars ( 4.9 out of 5 ) from 136 feedbacks
these some pictures for the case
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please share experience with your preferred case

I agree. I have blue, black, grey, matt and frosted versions. Excellent case, frosted is like very fine sand paper like feeling, excellent grip. Matt is like a baby skin smooth. Fits like a glove, side buttons very nicely usable and ports easily connectable. I highly recommend.

Though this post looks like a big ad for those cases, I have to admit that I have one and it's quite awesome!

best combo for me,this case along with this screen protector

I went with this one and so far it's working fine..
I actually did the "o ****, flying phone' the other day and it bounced and not a scratch in it and no cracks on the screen or cover..so it's proved it's worth already..
The kick is handy but I also find that helps with holding the phone in one hand..
Also I use charging dock during the day and it works fine with those too..
Charging dock used..
Sent from my EVA-L09 using Tapatalk

I've got that one with the kick stand for my P9, but it was too slippy in the hand.
I use a Ringke Fusion on mine.
https://www.amazon.co.uk/d/Mobile-P...UTF8&qid=1483608177&sr=8-1&keywords=ringke+P9
Not too slippy, the corners are protected nicely, and it has a lip all the way around the front, so you can put your phone face down and the screen wont touch the desk etc.
I like the covers on the headphone and USB port too. Stops fluff from your pocket getting in there!

Lenuo case
I really missed my product (RED) leather case, that I had on the iPhone 5, so I found something similar.
This is a case by Lenuo, and they also have a flip-version of it. I'm currently very happy with it

I got this case off eBay Australia, its bargain for $6.99 but stay away from the tempered glass, its crap and does not even cover the screen. This case has no lip for the display so a tempered glass that actually cover the full screen is highly recommend.
http://www.ebay.com.au/itm/17239282...49&var=471220823462&ssPageName=STRK:MEBIDX:IT

I currently use a leather back cover case:
Link: https://www.aliexpress.com/item/Del...ei-P9-5-2-Inch-Pierre-Cardin/32696459668.html
spring80 said:
best combo for me,this case along with this screen protector
Click to expand...
Click to collapse
Where did you buy that? I got the ordinary glass screen protector and it's crap because it doesn't fully protect whole of the screen.

n0my said:
I currently use a leather back cover case:
Link: https://www.aliexpress.com/item/Del...ei-P9-5-2-Inch-Pierre-Cardin/32696459668.html
Where did you buy that? I got the ordinary glass screen protector and it's crap because it doesn't fully protect whole of the screen.
Click to expand...
Click to collapse
from here my friend
Full Cover Anti-Explosion 9H 2.5D Tempered Glass For Huawei P9 EVA-L09 EVA-L19 EVA-L29 Nillkin Amazing CP Screen Protector Film
http://s.aliexpress.com/mUBriQvQ

Currently using these 2 and loving both...........
Official Magdalena Hristova Painted Union Jack Soft Gel Case for Huawei P9 https://www.amazon.co.uk/dp/B01L90OBOK/ref=cm_sw_r_cp_apa_LHtIyb351ZHE8
Yooky Hua Wei P9 Case, Premium PU Phone Cover & Business Style Luxury Genuine Leather Flip Protective Shell For Huawei P9 Wallet Case https://www.amazon.co.uk/dp/B01M0QX7QL/ref=cm_sw_r_cp_apa_ALtIyb6ZPHQQC

What's your opinion?
n0my said:
I currently use a leather back cover case:
Link: https://www.aliexpress.com/item/Del...ei-P9-5-2-Inch-Pierre-Cardin/32696459668.html
Click to expand...
Click to collapse
What is your experience with this Pierre Cardin cover? I had one for my LG G3 and i loved it.
Is the fingerprint sensor easily accessible???
Please let me know.

Braggus said:
What is your experience with this Pierre Cardin cover? I had one for my LG G3 and i loved it.
Is the fingerprint sensor easily accessible???
Please let me know.
Click to expand...
Click to collapse
So far so good. Still waiting for the worn out look
I think if the finger print sensor was crap on P9, then this cover wouldn't be good. Because when I first looked at the case in my hand, I thought that the finger print sensor won't be able to read enough of my finger print when unlocking. But P9's finger print sensor is really good and works 100% with this case.
The finger print cutout is right in the center and precisely cut.
I wouldn't recommend this case to someone who drops their phone a lot because some areas are not protected by this case. The front facing top and bottom edges of the phone.
But this isn't a problem for me, I rarely drop any phone.
Let me know if you want to know more.

Thanx for your reply. I luckily also drop my phone rarely so that's nothing to worry about. I'm about to order one when i'm at home.
And again, thank you for your reply.

I received this case today https://www.spigen.com/products/huawei-p9-case-rugged-armor feels very good in hand and I like how it looks

Been using the Otterbox Acheiver Case for the last couple of weeks. I use my phone when hiking with OS Maps so wanted something robust.
It is very good, and easier to take on and off than previous Otterbox Commuter cases, but they have not included plugs for the charger and headphone ports this time. A minor gripe. The phone will still survive a drop onto rocks as long as the case takes the hit and not the screen!
http://www.otterbox.co.uk/en-gb/huawei-p9/achiever-case/77-54512.html?color=20

Cool! I had no idea Otterbox made cases for the P9

n0my said:
I currently use a leather back cover case:
Link: https://www.aliexpress.com/item/Del...ei-P9-5-2-Inch-Pierre-Cardin/32696459668.html
Where did you buy that? I got the ordinary glass screen protector and it's crap because it doesn't fully protect whole of the screen.
Click to expand...
Click to collapse
I have this case to, purchased from Amazon UK. Really recommend it but not for total protection or impact. Have to buy something stronger when my 18 month son holds it and decides to throw it about!

anyone else had tested / bought these luphie bumper cases? which protective but not too bulky case can anyone recommend ?
also which glass screen protector (nillkin/other brand?)
thanks

Still looking for a new case, got my phone a few weeks ago after upgrading from a Samsung S4, are people on this forum still using P9?

[REVIEW] UltimateShield Tempered Glass Screen Protector OP7 Pro

This will be a short review which hopefully helps OP7 Pro owners wether they should buy the tempered glass protector from Ultimate Shield or not. Please take your time and read the whole review
PRODUCT PAGE
https://www.ultimateshield.co.uk/products/oneplus-7-pro-tempered-glass-screen-protector
This might be the time to add that Ultimate Shield did not tell me to write this, I bought the screen protector because I have used their OP5 tempered glass in the past and was satisfied with that one. In case the pictures don't show on your screen, I've attached them in a zip file down below.
What do you get?
For £11.99 (~14€ / ~15$) and free worldwide you get one screen protector, instructions, dust removal stickers (which I forgot when taking the picture), a microfiber cloth and a wet cloth.
I bought it because I wanted a tempered glass screen protector which is curved so I can protect the whole display including the curved edges.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What about applying it?
The instructions are basically useless, since we're dealing with a screen protector which sticks to the phone with the adhesive side, so no bubbles, no "vacuum" or anything like that, as long as the display has been cleaned before nothing can go wrong, just make sure that the side slim black bar is alined with the top of the phone. Oh and you should remove the preapplied screen protector before putting this one on the display. After that it is important to apply preassure on the border of the screen protector to make it stick, and this is where things get critical, at least that is what happened to me. Even though it looks like I've prefectly placed the glass on top of the display some parts of the protector simply won't stick, or at least stick for a few minutes. I have added some photos where you can see a tiny gap. Keep in mind that I have applied A LOT of pressure on those parts, more than enough. The screen protector has rounded corners and a curved edge, it covers about 99 percent of the display.
What about colours and sharpness of the display with the screen protector?
After applying the screen protector I haven't noticed any kind of weird colour shifting or rainbow effect. It still looks as sharp as before, but due to reflections the edge of the display has some minor rainbow effect. I only notice that at a specific angle and when the background is white. Oh and it doesn't seem to cut off any part of the screen.
What about the fingerprint reader?
After deleting the old fingerprints and adding new ones with the screen protector applied the fingerprint scanner works 99/100 times, it might take a split second longer than without it, but I didn't have any issues.
What about the touchscreen and gestures?
This is where I got frustrated. After using the phone with the tempered glass I instantly noticed that the touchscreen wasn't as responsive as it was before. "alright", I said to myself, "It is completely normal that it feels different now". Unfortunately this is why I would personally not buy this screen protector again. I had to apply more pressure than ususal when tapping on an icon and so on. Sometimes the touchscreen didn't register even though my finger clearly touched the glass. This was very annoying when using the keyboard, in almost every sentence at least one or two characters where simply missing because the touchscreen wasn't as responsive as before. Same story with gestures, you need a lot more pressure and when swping up or down in order to open the app drawer or notifications it sometimes works but sometimes it takes up to three tries in order to get the gesture to work. In comparison, without the tempered glass screen protector I had no issues at all.
SUMMERY
Applying it was easy but when I did it it didin't stick as good as I hoped it would. The tempered glass screen protector doesn't really change colours, which is a good thing. THe touchscreen experience was comparable with one of those older smartphones where you had to use more force and it wasn't as accurate. Overall, I can not recommend it for the price, unless you use the touchscreen with a lot of force. If you think that I didn't apply it correctly feel free to "call me out" in the comment section and tell me how you would have done it.
UPDATE
Since the tempered glass didn't stick very well anyway I went ahead and carefully removed it and moved it about 1mm downward. Unfortunately the touchscreen is still not responsive enough to use the keyboard without any issues which is why I contacted Ultimate Shield directly via Email. (still waiting for them to reply)
FINAL UPDATE
They answered and after looking at the images I send them they said that it might be faulty because according to them the black adhesive should stick much better than it did in my case. They were kind enough to give me a refund! If you bought one and had a much better experience please tag me so I can quote your opinion!

Probably cus it's not full adhesive. We need to wait for Whitestone or something like that

Guitarfreak26 said:
Probably cus it's not full adhesive. We need to wait for Whitestone or something like that
Click to expand...
Click to collapse
Probably, I think my application was good, I guess the adhesive can't do the job when it comes to the curved edges...

Too bad OP didn't release one at launch. I assume they will down the road like they did with the 6T.

JedixJarf said:
Too bad OP didn't release one at launch. I assume they will down the road like they did with the 6T.
Click to expand...
Click to collapse
I'm not sure, they already have one for the OnePlus 7, jsut not the Pro

Cus it's curved usually only decent one for a curve is white stone

freaky2xd said:
I'm not sure, they already have one for the OnePlus 7, jsut not the Pro
Click to expand...
Click to collapse
Well the 7 is just the 6T, so they just have to update the packaging

Not trying to be funny but was there an indication on the protector as to where the top/bottom was?

djsubterrain said:
Not trying to be funny but was there an indication on the protector as to where the top/bottom was?
Click to expand...
Click to collapse
Well the flap of the protective foil that was on the the glass was probably the indicator.
That and the fact that the bottom part of teh black frame was way wider than the upper part...
About 2mm of black adhesive on the buttom and 1mm on the top...
EDIT:
It wouldn't make sense to aline the the thicker black line with the thin bezel
I've sent UltimateShield an email concerning this issue.

I've ordered same protector for delivery tomorrow, getting the phone today so I'll give it a go, how is it with cases or have you not checked? I've ordered the Ringke Fusion-X too so would hope they'll work together.
Watched this video of the PureGear protector, from XDA fave TK Bay, which looks mucho pricey but seems to play nicely with, at least, official cases.

djsubterrain said:
I've ordered same protector for delivery tomorrow, getting the phone today so I'll give it a go, how is it with cases or have you not checked? I've ordered the Ringke Fusion-X too so would hope they'll work together.
Watched this video of the PureGear protector, from XDA fave TK Bay, which looks mucho pricey but seems to play nicely with, at least, official cases.
Click to expand...
Click to collapse
the glass doen't fully the cover the display, there's about 1 to 1.5mm between the tempered glass and the frame of the phone, I can use the transparent TPU case that came with the phone without any problems

Thank you for your review. I currently have a film on my screen now. I was thinking about purchasing a tempered glass shield for my 7 pro especially since T-Mobile has the Puregear one on sale for 10 bucks off (if I'm not mistaking) but I'm not sure.

I actually ordered the same tempered glass,but I noticed that it wasnt clear and that the black outline on the edges was the adhesive. It doesn't truly embrace the curved screen, but you can use it for the back of your phone. I glued to the back of my 7 Pro with the clear case on. Your phone will look like a beast
Sent from my GM1917 using Tapatalk

Hentai_expert said:
I actually ordered the same tempered glass,but I noticed that it wasnt clear and that the black outline on the edges was the adhesive. It doesn't truly embrace the curved screen, but you can use it for the back of your phone. I glued to the back of my 7 Pro with the clear case on. Your phone will look like a beast
Sent from my GM1917 using Tapatalk
Click to expand...
Click to collapse
interesting approach xD

I'm waiting for this to show up: https://www.amazon.com/gp/product/B07RP5KJXV/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Seems like a Whitestone clone. Hoping it's decent.

Got one too. Install was super easy but like said in OP, sensitivity gets way worse. I would not recommend.

Do you know if the product is in stock?

Looks like the OP product was replaced by a newer full adhesive version:
https://www.ultimateshield.co.uk/co...us-7-pro-7t-pro-liquid-glass-screen-protector

The screen of my 7Pro looks like new. I never used a screen protector. Just the sandstone hardcase for the back.