Develop Bugs

Rooting the Alllview P6 (dual sim) phone and much more!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
!!!! UPDATE !!!
also working for
P6 Stony Quad
​
[Devices: Allview P6 (Stony), Allview P6 Quad (new) /A]
This thread will discuss the following topics:
1- How to backup and restore your user data [ready]
2 -A a guide How to root the Allview P6 [ready]
3- how to make a full system backup and restore of a rooted phone
4- how to run programs that recognized that your device is rooted
5- how to disable or delelete system applications
6- how to use an alternative launcher
7- how to use an alternative phone dialer
8- how to completely restore factory settings using a stock image from Allview
9- ADB
10- setup dual sim
11 - reset from frozen state
12- factory mode (hold the volme down button and the powerbutton)
[UNDER CONSTRUCTION]
update --20-1-2013
Please be patient. I don't have much time to spend building this thread but I WILL write down all the promised points. starting by 1
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​​
1- How to backup and restore your user data
(if applicable unlock klick once on the power button to get it from standby and unlock the screen by swiping the middel circle.)
- press and hold the powerbutton on the left side of the phone
untill a screen appear that let's you choose to power off te phone.
- you will know the phone is truly turned off when you hear or feel a final short vibration
- now, press and hold the volume UP button on the right side off the phone and at the same time press and hold the powerbutton.
- Wait until a logo from Allview appears. at that time you can let go.
The following recovery screen will appear:
use the volumeUP and volumeDOWN keys on the right side of the phone to choose "backup userdata"
once selected press the powerbutton on the lef side of the phone.
a screen will appear and a green bar will show the progress. please be patient, this can take a while
after the backup has completed you will return to the recovery screen. you can then use the volumeUP and volumeDOWN on the right side of the phone to scroll to "reboot phone" and you will return to normal modus. that's it. your done. You now have a backup of your userdata. it will be placed in the root of the SDCARD that is in your phone.
You can use the same procedure to restore it.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2-A a guide How to root the Allview P6
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1- Use the following Guide by Bin4ry
----------------------------------------------------------
Bin4ry THANK YOU for that post
---------------------------------------------------------
!!!!ATTENTION!!!
rooting will NOT work if:
- you do not have USB debugging enabled
- do not have allow installation from fake places enabled
- have downloaded a superuser app
I will show the spefiic steps and results for the Allview P6
- download the zip file needed at the top of the post
- extract the zip file
- now, make sure your phone is in USB debugging mode
- goto settings, developer settings and enable usb debugging
- now connect the phone with a usb cable to the computer
- now, goto the unzipped file and double-click "runme.bat"
- make sure your phone is on, and unlocked (screensaver lock)
- choose 1 for a normal procedure
if everything went well the following screen will appear:
- a screen will apear on your phone
- dot NOT enter any password
- choose restore my data
- after a while a message will appear quickly and dissappear as quickly saying "restoration finished". the screen will close.
- the phone looks in normal mode
- now wait for the phone to restart (it will!)
- after it restarts, before it comes into normal mode it will say briefly "upgrading android"
- once the phone is restarted you will see and extra icon "super user"
- if you now download a program requering root accesss a box will appear letting you choose to allow the program root acccess. once or always or to deny.

Allview p6 stony
Thx for the trick.
This phone is a good one but can be even better if we can get some cooked 4.1 or 4.2 roms.:good:

allview p6
Thanks for this thread.Very useful instructions .looking forward to your upcoming posts.good job. thanks

Just wanted to say thanks for helping me root my P6.
It worked just as you described.
Only had one issue. My windows 8 system did not have the ADB drivers installed for the script.
I googled that and after I got the drivers it worked fine.
Looking forward to any updates on this post.

can u please continue this thread ??

Is there any chance this phone will ever get an update to Android 4.1?

alguem sabe onde consigo a rom desse aparelho, ziquei o meu e agora ele nao funciona a rede. como farei agora?
Anyone know where I can get the rom this handset, ziquei mine and now it does not work the network. how do now?

update tot 4.1 for P6 Stony
dutchguy said:
Is there any chance this phone will ever get an update to Android 4.1?
Click to expand...
Click to collapse
right now, there is an official update from Allview op there site allview.nl/toestellen/allview-p6-stony/update/
no Jelly Bean yet, sorry.

continue thread
ZecaR said:
can u please continue this thread ??
Click to expand...
Click to collapse
I'm sorry you are quite right. I WILL do so. please be patient.

great that works with Allview P6

Allview P5 Qmax
Hi, anyone knows how to do root at Allview p5 Qmax? Thanks.

Hi all,
I have the Allview P6 stony myself. What I miss on this phone is the option to associate contacts to a SIM. I've been searching all over to find a solution for it. So far without luck. Thats too bad, because the quad version of the phone has this option integrated. I want to share my findings here, hoping anybody else can benefit from what I found so far.
This phone is sold all over the world with different names. The dual core version is know as:
Allview P6 Stony (Romania and the Netherlands)
Fly IQ 444 (Russian)
Blu Vivo 4.65 (american, has two versions based and band)
NGM We Move Legend XL (Italian)
There is also a Quad core version with jelly bean and the associate contact to SIM function ...
Gionee Dream D1 (Chinese)
Allview P6 Quad (Romania and the Netherlands)
Walton Primo X1 (Indian)
Nice detail: The Italian version has the function I need (associate contact to SIM, but I can't find it's ROM anywhere and their support department wouldn't give it to me)
As a new user I am not allowed to post links to the firmware I found so far but... :angel:
For the Fly IQ444 there is official and rooted firmware on 4pda.ru
with extension /forum/index.php?showtopic=415423
For the Allview P6 the firmware is on ther website allviewmobile dot com with extension com/fileadmin/p6_update/Allview_Update_P6_17012013.zip
For the Walton prima the firmware and update software is on some unknown site hellomobilecms.blogspot dot nl
with extension nl/2013/05/walton-android-primo-series-phone.html (google how to use...)
Now that I did my part in sharing.. I still have these questions.
Can I flash my dual core version of this phone with the quad core version firmware, or will that "brick"it?
Can anybody get his or her hands on the Italian firmware ?
Is there any other option to get this "associate contact to SIM" function working?
EDIT: The app "SIM selector" from th eplay store adds associate contact (number) to SIM functionality

How to add CWM recovery for Allview P6
Hi All,
I am still new to this, so perform at your own risk :laugh:
Here is my How to add CWM recovery to your Allview P6.
First I need to say some thanks
OP here on XDA for telling how to root the Allview P6
Hohol on 4PDA.ru He posted the CWM for the Fly IQ444, I only edited his work so it was compatible with the original Allview P6 update
michfood here on XDA for explaining how to edit a recovery image and provide the tools to make it easy.
Ok so I said my thanks, here we go (on your own risk)
Root your Allview P6 (but since you are reading this in as a reply to OP's post I guess you allready did that
Download and install Mobileuncle tools from the play store. Watch out here, this tool can make you flash the wrong boot image!! so follow my instructions carefully
Download the recovery image for Allview P6 I created based on Hohol's recovery for Fly IQ444. (attached to this post)
Put the recovery image on your SD card (not in a sub folder, directly in the SD card root)
Start mobile uncletools en go to Recovery Update
Select the recoveryalvw.img file en go ahead, flash it :silly:
The file should be the first option available, if not it's probably on the wrong location
Now if you reboot in recovery you will have CWM available for backups and flashing of ROMS (And yeah, only Roms I found I allready posted above)
With this option I wass able to
Backup my Allview P6 Rom and Data
Flash Hohol's IQ444 CWM rom on my Allview
Restore the original Allview P6 update from Allview's website
Final note: I don't have the original Allview P6 recovery image, so once this is done, you can't go back. But that only matters for your warrenty and you allready broke that by rooting your phone Actually restoring the Allview original update did also restore my recovery image to it's original AND it unrooted my phone. Nice for warranty...:angel: less nice for me here I go unrooting again :silly:
Extra final note: Now I only need the NGM We Move Legend XL rom so I can flash that on my Allview... anybody?

It works

I have solved the problem and now have CWM on my p6 quad

spit85 said:
I have solved the problem and now have CWM on my p6 quad
Click to expand...
Click to collapse
So how did you solve it?

Do you want a other recovery on your phone, a other then the stock firmware.
You can use CWM or TWRP (TWRP is a full touch recovery)
Expand your internal memory from the phone to 2.5 GB
How to flash the recovery
You can use Mobileuncle MTK Tools, to download by Google Play Store
- Rename the downloaded recovery image to recovery and place it on the root from you sdcard-
- Start MobileUncle Tools (your phone must be rooted).
- Go to the tab recovery update.
- Now you will see the recovery.img file, chose it.
- It will prompt if you want to flash it, and after it will ask to reboot in recovery.
- now you have the flashed recovery on your phone
The other way is to flash it with SP Flash Tool (to download in the attachment files below " SP Flash Tool v3.1328.0.183.zip")
Download the attachment and unpack it.
- Open the program to double click on Flash_tool.exe
- Open the scatter file for you phone (the scatter file for the Allview p6 Quad is in the folder Allview; named "MT6589_Android_scatter_emmc_PMT"). If don't have a scatter file, create one for you phone.
- now double click on "recovery" and select the downloaded recovery image.
- be sure you only selected the recovery check box, not the other check boxes.
- select download, but not "firmware->upgrade", because you will brick you phone. So only choose "download"
- now power down you phone and wait until it is fully shutdown, then connect your phone to your computer with the usb cable.
Note that you have first to install the adb drivers and the USB VCOM drivers, other wise you cant use SP Flash Tool.
You can download the drivers also in the attachment files ("SP_Flash_Tool_drivers.zip"), and i assume that you know how to install a driver on your computer.
The best way to install the drivers for your phone is the shutdown the phone and press the volume down button, hold it, and press the power button, until the phone go's on. You will see a screen with factory settings, ore something like that, but that doesn't matter. If you now connect your phone two your computer it will find to new devices. Use the drivers in the attachment file to install the drivers on your computer.
Do it on your one risk! I'm not responsible for any brick!
How to root the Allview P6 Quad
- Download the attachment "motochopper.zip" and unpack it.
- Enable usb debug mode on your phone and connect your phone to the computer.
- Click on "Run" in the unzipped folder and follow the instructions, and after that your phone is rooted.
If your phone reboots, you will see the superuser app from clockworkmod. Don't uninstall it and install a other superuser APK, because a other superuser app doesn't work, only the clockworkmod superuser app.
Another way is to use UnlockRoot. Download it here and chose the free version.
- First root your phone with motochopper, before you use UnlockRoot, otherwise it doesn't work.
- Install and open UnlockRoot.
- Connect your phone to your computer (with USB debug on).
- Click on "Root" and wait a moment, until there is a popup where you can choose your phone; choose it.
- UnlockRoot will say that your phone is already rooted, and if you want to root it again. Choose yes.
- After it is rooted you will be ask to install some other app, but you can refuse it, then your phone will reboot.
- After the phone is rebooted, open UnlockRoot again and click on "Unroot".
- Wait until your phone is unrooted.
- Uninstall the superuser app from clockworkmod
- Install SuperSu from Chainfire, download it in google play, here
- After your phone is unrooted and you installed SuperSu, open UnlockRoot again and choose "Root", and again there will be a popup where you can choose your phone; choose it.
- Follow the instructions, and after your phone reboots, your phone is rooted correctly, and you can also choose other superuser apps, but first uninstall always the old superuser app if you want to install another.
I have no idea why it must go this way, but that was the only way for me to root my phone right, so i can install SuperSu.
Edit: new CWM V6.0.3.2
I ported a newer CWM version from HBB (V6.0.3.2) to the Allview p6 quad, with some more futures in it:
- dual sdcard mounting
- install zip from sideload (ADB)
- partition sdcard and partition internal sdcard
If you want to give it a try, download attachment "CWM_V6.0.3.2_allview_p6_quad.img" and flash it to your phone.
Do it on your one risk! I'm not responsible for any brick!
Edit: TWRP V2.4.4.0 for p6 stony and p6 quad
I have ported TWRP V.2.4.4.0 (Team Win Recovery Project), for both models, the p6 quad and the p6 stony. But i haven't tested it for the p6 stony, because i only have a p6 quad. But Salvolin confirmed it works on his P6 Stony.
I'm also try to port TWRP V.2.5.0.0, but the recovery gets to big to flash, so i try to solve that to get a other layout with pictures in it that have not so much kb. At the moment SP Flash Tool cant make the recovery bigger if i edit the scatter file, then there is a strange error, so i have to wait of e newer version from SP Flash Tools. But for me TWRP is a good recovery, because its full touch.
You cant restore CWM backups with TWRP, or TWRP backups with CWM
The only way to convert your CWM recovery to a TWRP is:
- Flash CWM and restore the backup.
- Flash TWRP and backup
- Flash CWM and restore another backup
- Flash TWRP and backup.
If you have 10 backups from CWM, and you want them all converted to TWRP, you must flash a few times between the recovery's.
For the P6 Quad, download attachment "twrp_2.4.4.0.img"
For the P6 Stony, download attachment "TWRP_v2.4.4.0_Allview_p6_stony.img"
Do it on your one risk! I'm not responsible for any brick!
How to expand the internal Storage to 2.5 Gb for the Allview P6 Quad.
This patch is only for the Allview P6 Quad, not the Stony.
First you make a backup from your phone with CWM or TWRP.
Download the attachments 'Allview_P6_Quad_2.5GB_internal.zip' and unzip it. Load the scatter file in Sp Flashtool. If everything is correct, you only see EBR1 and EBR2 selected.
Then hit the Download button, not the firmware upgrade button! If you download it to the phone, go into the recovery and do a factory reset.
Now you can place your backup back and reboot your phone. Now you have a 2.5 GB internal partition, instead a 1 GB partition.
The internal SD is now 300 MB.

:laugh:

Is there a way to flash a stock Android rom on this phone?

forza11 said:
Is there a way to flash a stock Android rom on this phone?
Click to expand...
Click to collapse
I flashed between the Fly IQ444 rom and the allview P6 one
But now I bricked it with a THW 5 or something rom :crying:

Stock A500KL ZenFone 5 LTE

After looking everywhere I finally found a stock recovery for the ZenFone 5 LTE A500KL. Attached is the Stock Recovery and TWRP Recovery. Feel free to download as needed. I've uploaded them to my 4Shared Account. I'll keep the files there until 4Shared is shut down..
http://www.4shared.com/file/4DLKDZCDce/ZenFone5LTEStock.html
http://www.4shared.com/file/N-ds8kivce/ZenFone5LTETWRP.html

dont know how to thank u mate
solved my problem invaild boot image by flashing boot and ur stock recovery and became able to revive my set

Need Help
Shady_Tawfik said:
dont know how to thank u mate
solved my problem invaild boot image by flashing boot and ur stock recovery and became able to revive my set
Click to expand...
Click to collapse
Would you mind to tell me how you did that??
Regards.
---------- Post added at 06:01 PM ---------- Previous post was at 05:56 PM ----------
@TabascoTX, Is there any stock boot image for A500KL too??
Could you help me provide the stock boot??

urgent help needed
i got my zenfone 5 lte bricked due to firmware update, couldn't fix in any way, i can go to CSC screen only but not the SD download since it gives me invalid boot image and can't go through.
just downloaded the above given stock and flashed it, it worked, but i still have the same invalid boot image error, i tried most of boot images but still the same.
any help please ?

arimbi26 said:
Would you mind to tell me how you did that??
Regards.
---------- Post added at 06:01 PM ---------- Previous post was at 05:56 PM ----------
@TabascoTX, Is there any stock boot image for A500KL too??
Could you help me provide the stock boot??
Click to expand...
Click to collapse
adb in C drive
cmd
cd c:/adb (or other localization for adb)
adb devices
fastboot flash recovery recoveryname.img
dats it !
in wrong rec u have mess like this 'its not boot image etc.'

TabascoTX said:
After looking everywhere I finally found a stock recovery for the ZenFone 5 LTE A500KL. l[/url]
Click to expand...
Click to collapse
Hello.
What flash tool you use to flash the recovery from PC to A500KL?
Trimis de pe al meu Nexus 7 folosind Tapatalk

​what version this twrp

I want lollipop for intex cloud n ips
please share the link

Thanks this worked for my A500KL!
Thank you! I had my zenfone 5 A500KL bricked for almost half a year.
This is what i did
in windows 10 --->
cmd
c:/adb
adb devices
fastboot flash recovery recoveryname(in my case it was ZenFone5LTEStock.img "From this thread" )
Then I got a message in cmd. It said Waiting for phone.
So I pressed down power + volume up. The phone was detected by my PC and the command finally ran.
Next I pressed down power + volume up again and the recovery mode menu finally showed up again!
From there just wiped cache, wiped system, install rom from sd.
Thanks everyone!!!
GeloXD said:
adb in C drive
cmd
cd c:/adb (or other localization for adb)
adb devices
fastboot flash recovery recoveryname.img
dats it !
in wrong rec u have mess like this 'its not boot image etc.'
Click to expand...
Click to collapse

I would kiss you right now if i could (and im no gay.)
I was missing this and worked my *** off the last 2 weeks trying to fix the recovery.. I found this and it worked like a charm in 5 minutes bang. Phone on and working.
God bless you my friend!

anyone have stock recovery A500KL WW.12.4.5.58 ? My Recovery was bricked at Invalid Boot image

benaleobayu said:
anyone have stock recovery A500KL WW.12.4.5.58 ? My Recovery was bricked at Invalid Boot image
Click to expand...
Click to collapse
This should work for you. I'm running stock with the same Firmware version. Sorry it's taken me so long to jump back into this tread. Was using a Moto for a while. I like this phone so much more, but with all the stock Asus crap you can barely have any apps. Going to re-root and get rid of some of the bloatware.

dont know how to use cmd
GeloXD said:
adb in C drive
cmd
cd c:/adb (or other localization for adb)
adb devices
fastboot flash recovery recoveryname.img
dats it !
in wrong rec u have mess like this 'its not boot image etc.'
Click to expand...
Click to collapse
please help me. i dont know how to use it step by step

1. download adb
Code:
https://androiddatahost.com/wp-content/uploads/minimal_adb_fastboot_v1.4.2.zip
2. unpack it any place, i suggest you to move it to c/adb is quick and the best way.
3. in keyboard press windows key + r, type cmd, than press enter
4. in black cmd window you must type 'cd c:\adb'
#tips# if other disk like D first 'D:' than cd D:\adb or cd adb (or just paste your path to folder)
5. type adb devices to see : 1) correct adb work ? 2) drivers for phone work correct if not u need drivers
5b. In phone go to developer mode and select 'debug usg'
#tip# developer mode turn on if 7 times touch build version in information section.
5c. If connected click in phone 'yes' and remember connect debuggin with pc.
6. if after type adb devices you have somethink like this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. if good like this type 'fastboot flash recovery recoveryname.img
#question# recovery file where ? - recovery.img paste to main adb folder
8. just wait for pass and dats it :] u have custom recovery
Drivers link
Code:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE500CL/ASUS_Android_USB_drivers_for_Windows_20150212.zip
Check work, or search here
Code:
https://www.asus.com/Phone/ZenFone_5_A500CG/HelpDesk_Download/

Anyone here who can help to unbrick my ASUS Zenfone 5 LTE ( A500KL ). Its stuck in invalid boot image. If i press power + Volume up it goes to the CSC mode. Fastboot commands working there but only limited. If anyone can help I can give access by remote session using teamviewer. Please contact me ASAP. Appreciate your help.
Whatsapp me - 0094776010191

Hola ¿alguien me podria ayudar? mi telefono no pasa del csc mode y queda en error: invalid boot image, que puedo hacer ?

Vernee Apollo Helio X25 - TWRP and ROOT

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.0.3 at the post number 17 !
PLEASE FOLLOW VERY CAREFULLY THE NEXT STEPS
Make sure to have installed the OTA "full_k15ta_a-ota-1484567521.zip" (201701) !
1) Download the TWRP 3.0.2 at the next link :
http://www.mediafire.com/file/ya6ql5kcqtqy1h9/Apollo_twrp_3.0.2.rar
2) Install the adb drivers and fastboot commands :
http://www.mediafire.com/file/2df821420xpdp48/ADB_1.4.2.rar
Unrar the rar. Run “adb-setup.exe”. Hit “Y” to all 3 questions.
3) Tap on Settings --> About phone --> Tap Build number seven times.
Developer options --> OEM unlocking enabled and USB debugging enabled.
4) Download SuperSU.zip and BusyBox.zip at the next link :
http://www.mediafire.com/file/g4hubpximcn2g1b/LAST_SU-BU.rar
5) Unrar the rar. Copy the 2 zips onto your microSD.
STEPS TO DO ONCE ONLY :
6) Plug your phone to PC via USB cable.
Allow the pop up request on your phone to give your PC USB debugging.
7) Open CMD (command prompt).
8) Type the next command :
adb reboot bootloader (and press enter)
9) Now type the next command :
fastboot oem unlock (and press enter)
10) Press volume up (into your phone) to confirm to unlock the bootloader.
You will see in the CMD prompt the next messages :
"Start unlock flow", and when it will be finished, you will see "OKAY".
11) Reboot in normal mode (be patient, when you unlock the bootloader, the phone reset to factory).
12) Now tap 7 times on Build number. Then Developer options, and re-enable OEM unlocking and USB debugging.
STEPS TO DO EVERY TIME YOU NEED TWRP RECOVERY :
13) Copy the TWRP (recovery.img) into the same folder of fastboot.exe and adb.exe ( c:\adb\ ).
14) Connect your phone to the PC via USB cable.
15) Open CMD (command prompt) and type the next command :
adb reboot bootloader (and press enter)
16) Now type the next command :
fastboot boot c:\adb\recovery.img (and press enter)
17) Onto TWRP, if asking you to swipe to allow modification of System, tap KEEP READ ONLY.
18) Now - the most important thing - tap on Backup.
19) Check mark on Nvram, Boot, System and Data.
20) Tap on Select Storage, tap on MicroSDCard, tap on OK.
21) Tap Swipe to Backup.
22) Return to the main menù of TWRP.
23) Tap Install. Tap on Select Storage. Tap Micro SDCard. Tap OK.
24) Tap on SuperSU zip
25) Swipe to confirm Flash.
26) Tap on Reboot.
27) Tap on POWER OFF.
28) Turn on your phone.
29) Tap on the icon of SuperSU to activate it.
30) Download an app like "Root Check" or similar, to verify if phone is rooted.

is there a stock recovery available that i can flash in case i want to reset my phone or pull ota updates without flashing any zip files? i think the ota.zip that vernee released does not include a recovery, does it?
EDIT: there might be a possibility to extract recovery.img from the phone over adb. the problem is that you need to be rooted to do this but i am not, so i will leave a link down below. could someone who rooted his apollo try to get the recovery.img ?
https://android.stackexchange.com/questions/132314/can-we-backup-the-stock-recovery-img-in-any-way

julius1504 said:
is there a stock recovery available that i can flash in case i want to reset my phone or pull ota updates without flashing any zip files? i think the ota.zip that vernee released does not include a recovery, does it?
Click to expand...
Click to collapse
You are right. There is no recovery.img inside the OTA update zip
I have made a custom recovery by myself. The pictures are the proof that my twrp works well.
This twrp method does not affect the original stock recovery.
Before to start the twrp by Fastboot, make sure you have installed the OTA 201701 update zip onto your Apollo.

Hello, the method works very well ....
Thank you very much :laugh:

Hello, Cleopatra
Just a couple of questions....
1.- In this TWRP "instalation" you ask adb to boot from an image is not in the telephone but in your PC? (Please, confirm)
2.- Instad using SuperSu for root, can Magisk take its place? Magisk seems to be a very promisory system.
Thank you very much. I do not have my piedce already to check myself. That is the reason of item 2.-

jrotaetxe said:
Hello, Cleopatra
Just a couple of questions....
1.- In this TWRP "instalation" you ask adb to boot from an image is not in the telephone but in your PC? (Please, confirm)
2.- Instad using SuperSu for root, can Magisk take its place? Magisk seems to be a very promisory system.
Thank you very much. I do not have my piedce already to check myself. That is the reason of item 2.-
Click to expand...
Click to collapse
Your first question :
Fastboot to boot the recovery.img (TWRP) inside your PC. I confirm it.
Your second question :
Regarding Magisk, please keep in mind that you need also "phh's SuperUser" and "xposed-v87.0-sdk23-topjohnwu.zip".
Very soon I will have the Vernee Apollo in my hands to do all kinds of tests without asking anyone to be the test case.
The first most important target is to make a stock firmware flashable by SP Flash Tool.
The second most important target is to make a twrp flashable by SP Flash Tool.
Regards

We are in the same situation...
Waiting
Graccie tanto!!!

Stock firmware in Flash Tool
Cleopatra Bianchi said:
Your first question :
Fastboot to boot the recovery.img (TWRP) inside your PC. I confirm it.
Your second question :
Regarding Magisk, please keep in mind that you need also "phh's SuperUser" and "xposed-v87.0-sdk23-topjohnwu.zip".
Very soon I will have the Vernee Apollo in my hands to do all kinds of tests without asking anyone to be the test case.
The first most important target is to make a stock firmware flashable by SP Flash Tool.
The second most important target is to make a twrp flashable by SP Flash Tool.
Regards
Click to expand...
Click to collapse
I look forward to flash the stock firmware in Flash Tool. I foolishly made a phone of brick, all backups lost. Thanks!

UPDATE 01
UPDATE 01
Carliv Touch Recovery 5.7.3
The touchscreen does NOT works.
BUT :
You are able to move between the options by "volume up" and "volume down" buttons.
You are able to select any option by "power" button.
Flash it by SP Flash Tool (load the scatter file inside rar and select "Download Only" option).
On an inspired idea by Marsapa (Androidiani forum).
Download link : You will find it on Needrom
STEPS TO UNBRICK THE VERNEE APOLLO :
Make sure you have the "full_k15ta_a-ota-XXX.zip" onto your microSD.
Make sure you have "UPDATE-SuperSU-v2.79-20161211114519.zip" onto your microSD.
SuperSU.zip and BusyBox.zip link :
http://www.mediafire.com/file/g4hubpximcn2g1b/LAST_SU-BU.rar
1) Flash the recovery.img with SP Flash Tool.
2) Press "volume up" and "power" buttons simultaneously.
3) Select the first line with "volume up" button.
4) Press "volume down" to enter into Carliv 5.7.3.
5) Press "volume down" button and select "install zip".
6) Press "power" button.
7) Select "Choose zip from ExtraSD" and press "power" button.
If you do not find anything on ExtraSD, select "Choose zip from Sdcard".
8) Select "full_k15ta_a-ota-1482441792.zip" and press "power" button.
9) Select "Yes - Install full_k15ta_a-ota-1482441792.zip".
10) Press "power" button to start the flash of OTA zip.
You will see the following lines appear in sequence :
Finding update package...
Opening update package...
Installing update...
Target:
alps/full_15ta_a/k15ta_a:6.0/MRA58K/1482438895:user/release-keys
Patching system image unconditionally...
Verifying the updated system image...
Verified the updated system image.
Patching custom image unconditionally...
Verifying the updated custom image...
Verified the updated custom image.
Patching custom image unconditionally...
Verifying the updated custom image...
Verified the updated custom image.
start to update general image
start to update loader image
start to update main loader image
Install from sdcard complete.
11) Select "<<<< Go Back <<<<" and press "power" button.
12) Press "volume down" button and select "install zip".
13) "Choose zip from Sdcard".
14) Select "UPDATE-SuperSU-v2.79-20161211114519.zip" and press "power" button.
15) Select "Yes - Install UPDATE-SuperSU-v2.79-20161211114519.zip".
16) When "Install from sdcard complete", "<<<< Go Back <<<<".
17) Select "Reboot Phone".
18) Select "No".
19) Be patient. Your Apollo will reboot twice.
20) Enjoy with your unbricked Vernee Apollo.
21) Settings-->About phone-->tap 7 times on Build number.
22) Developer options-->enable OEM unlocking and USB debugging.
23) Tap on SuperSU icon to activate it (New user).

Cleopatra Bianchi said:
The first most important target is to make a stock firmware flashable by SP Flash Tool.
The second most important target is to make a twrp flashable by SP Flash Tool.
Regards
Click to expand...
Click to collapse
Agree in both
Regards

Where can I find the update zip ?

How to enter to Custom RECOVERY?
Hello
I tried two recovery
TWRP and Carliv Touch Recovery
everything is ok - Backup and Restore
But how enter to recovery?
Button "-" with "power" dont work
Button "+" with "power" and when choose Recovery - dont work

Stuck on trying to install recovery. Downloaded everything.

greeneyez15o said:
Where can I find the update zip ?
Click to expand...
Click to collapse
http://www.vernee.cc/downloads-apollo.html
There are the two next zip :
full_k15ta_a-ota-1482441792.zip
full_k15ta_a-ota-1484567521.zip
The k15ta_a is typical of Vernee Apollo Helio X25

Sracer85 said:
Hello
I tried two recovery
TWRP and Carliv Touch Recovery
everything is ok - Backup and Restore
But how enter to recovery?
Button "-" with "power" dont work
Button "+" with "power" and when choose Recovery - dont work
Click to expand...
Click to collapse
I see you on 4pda.
1) "volume plus" + "power" simultaneously.
2) select the first line with "volume plus".
3) press "volume minus" to enter into recovery.
I suggest you to install "Quick Reboot (Root)" apk to enter more quickly into recovery mode.

stock rom flashable by SP Flash Tool
At the next thread you will find the stock rom flashable by SP Flash Tool :
https://forum.xda-developers.com/general/rooting-roms/vernee-apollo-helio-x25-roms-fix-t3561019

UPDATE 02
UPDATE 02
TWRP 3.0.3
Unfortunately the touch screen does NOT work.
Then, you will have to choose two different methods :
1) Flash the twrp 3.0.3 and use an OTG mouse.
2) Boot the twrp by Fastboot mode (please read carefully the steps at the first post).
Download link :
http://www.mediafire.com/file/274vwdo2xhm6aqm/Apollo_X25-twrp_3.0.3.rar

Cleo.
Think will be good you "edit" the first post and include this update. Thus yo do not obligue a reader to dive the whole thread to finf the most updated of your achievements...
Congrats and thank you. having TWRP for the phone is a huge step.
Regards

i just wanna say thanks alot
its working like magic on my Vernee Apollo
However, im still on
21) Tap Swipe to Backup.
took around 40 mins to Backup
i'll keep you posted of what happens
---------- Post added at 06:57 PM ---------- Previous post was at 06:12 PM ----------
Its all working just fine
Cleopatra :angel: what you did her is just beyond amazing

why666me said:
i just wanna say thanks alot
its working like magic on my Vernee Apollo
However, im still on
21) Tap Swipe to Backup.
took around 40 mins to Backup
i'll keep you posted of what happens
Click to expand...
Click to collapse
WHAT ??? 40 minutes to make a backup ???
WAIT please ! Probably you are doing it wrong.
Questions :
1) Do you have selected ONLY Nvram, Boot, System and Data ?
2) What kind of microSD are you using ? Speed class 6 or speed class 10 ?

[RECOVERY][OFFICIAL][3.6.1-x] TWRP for Galaxy Note 10/+/5G Exynos

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official TWRP 3.6.1-* For Galaxy Note 10/+/5G​Only for exynos variants - N970F / N975F / N976B (Europe - Global, Single/Dual-SIM), N971N, N976N (South Korea)
Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this recovery before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Kernel Features:
latest kernel source release
disabled uh/defex/proca/knox/rkp/rooting protection/logging/audit/useless features
spoofed config for firmware checks
Recovery Features:
built in full 64 mode
toybox/busybox support
compatible with Android 10.0 and above
Downloads:
Note 10 - d1 - N970F
Note 10 5G - d1x - N971N
Note 10+ - d2s - N975F
Note 10+ 5G - d2x - N976B/N976N
avb disabled vbmeta
Instructions:
Odin (Windows)
Prerequisites: Samsung USB drivers, Odin v3.14.1
If you already have the bootloader unlocked you can skip to step 6.
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
Download appropriate TWRP .tar file according to your device
Download avb disabled vbmeta .tar
Open Odin v3.14.1 and place the downloaded TWRP .tar file in AP tab, downloaded vbmeta .tar file in CP tab and click Start - once you press start grab the phone and press vol up + power to force it boot straight in TWRP after flashing
!! Only if coming from full stock firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
Heimdall (Linux)
Install heimdall & additional required packages:
Code:
sudo apt-get update
sudo apt-get install heimdall-flash android-tools-fastboot android-tools-adb libusb-0.1-4 libusb-1.0-0 libusb-1.0-0-dev
If you already have the bootloader unlocked you can skip to step 6.
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
Download appropriate TWRP .img file according to your device
Download avb disabled vbmeta .img
Open your preferred terminal in linux and type (replace red lines with the path of downloaded img files):
Code:
sudo heimdall flash --RECOVERY /path/to/recovery.img --VBMETA /path/to/vbmeta.img
and press enter - once you press enter grab the phone and press vol up + power to force it boot straight in TWRP after flashing
!! Only if coming from full stock firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
TWRP
Download .img file for your device and install from your current TWRP with Install image - browse to image location and select - Recovery
dd (Requires root)
Download .img file for your device, place it in the root of your /sdcard folder, rename it to twrp.img then run the following commands via adb shell or a terminal emulator app:
Code:
su
dd if=/sdcard/twrp.img of=/dev/block/platform/13d60000.ufs/by-name/recovery
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
Sources:
Device trees - d1 / d1x / d2s / d2x
Kernel - https://github.com/corsicanu/android_kernel_samsung_universal9820/tree/android-9.0
Recovery - https://github.com/omnirom/android_bootable_recovery
Credits:
TeamWin, geiti94, jesec, dyneteve, ianmacd, testers, donors and anyone else involved in making this possible
As always, if you like what i do, you can always send me some pizza/coffee/drugs/drinks or anything else via paypal.me/corsicanu

Compatibility and changelog:
07.03.2022 - TWRP 3.6.1
Security patch: 2022-02-01
Compatibility: only GVA*/GVB* firmwares, OneUI 4.0
Spoiler: Archive
09.01.2022 - android 12 support
Security patch: 2022-01-01
Compatibility: only GUL* firmwares, OneUI 4.0
08.01.2021 - android 11 support
Security patch: 2020-12-01
Compatibility: only ETL* firmwares, OneUI 3.0
27.12.2020 - TWRP 3.5.0 bringup - december release
Security patch: 2020-12-01
Compatibility: only DTK* and DTL* firmwares
09.12.2020 - december release
Security patch: 2020-12-01
Compatibility: only DTK* and DTL* firmwares
05.12.2020 - Initial release
Security patch: 2020-11-01
Compatibility: DTJ* firmwares
Misc links:
TeamWin official website
Telegram Support Group
Telegram Channel
Bootloaders / modems zips
Latest Magisk stable or canary
Further reading:
Full guide of how to unlock/root your device
Patch TWRP with Magisk
Use recovery to boot up rooted
Background on Android Verified Boot
Rollback protection

FAQ
Q: Can i use this recovery with other firmware then mentioned in compatibility?
A: Only with same Android version and only if you don't plan to boot rooted with TWRP (some kernels deliver root prebuilt in kernel), or Rollback protection will kick in and you won't be able to pass the lockscreen.
Q: Where do i get vbmeta.img?
A: From here, download the one you need according to install instructions.
Q: TWRP can't mount data partition, what to do?
A: Make sure you formatted data partition.
Q: Phone is not booting even after 20 minutes
A: Try to reboot. If still not booting, make sure you flashed multidisabler zip / formatted data partition.
Q: How to format data partition?
A:
Q: Phone is showing only Samsung logo
A: Try to reboot. If still not booting, consider installing an older TWRP build or a more recent firmware. If you still don't succeed, post here some details about your device and previous firmware and we might be able to help.
Q: Why do i need to format data partition?
A: Because old firmware encrypted your data partition and new rom can't decrypt and use that content / root needs access to data partition to place misc files / phone not booting after flashing root until data partition gets formatted.

official builds will be up in few hours

Nice, congrats!

Hi, i'm getting the Note 10 soon & remember when i've tested the S10 months ago that i had trouble with twrp encryption/decryption : can you confirm after wiping data that you can encrypt it (system) and twrp will be able to decrypt it after you enter your pattern..? Thanks.

Android 11 TWRP is up already for a while, in case you didn't notice it yet grab it from twrp.me.
Don't forget to use targeted TWRP for your android version and release, read more about compatibility in second post of this thread.
PS: N971N does not have a build compatible with OneUI 3.0 since no public release of that yet, it will be built once samsung starts pushing the update for that phone.
Regards!

corsicanu said:
Android 11 TWRP is up already for a while, in case you didn't notice it yet grab it from twrp.me.
Don't forget to use targeted TWRP for your android version and release, read more about compatibility in second post of this thread.
PS: N971N does not have a build compatible with OneUI 3.0 since no public release of that yet, it will be built once samsung starts pushing the update for that phone.
Regards!
Click to expand...
Click to collapse
is the latest TWRP 3.5.0_9-4-d1 compatible with the latest Samsung ROM update? Below are the details of the firmware update I'm referring to:
ModelSM-N970FModel nameGalaxy Note 10VersionAndroid 11Changelist21054212Build dateThu, 18 Feb 2021 05:15:51 +0000Security Patch Level2021-03-01Product codeXTCPDAN970FXXU6FUBDCSCN970FOXM6FUBD
Thanks in advance!
Edit: based on this article it's One UI 3.1

Hi,
Is this method works and safe for N971N?
Android 12

nilofino said:
Hi,
Is this method works and safe for N971N?
Android 12
Click to expand...
Click to collapse
Actually I tried and it works

Is it safe after installing TWRP to RE-LOCK the bootloader???

tried using with android 12 trough magisk and i got phone blocked on samsung logo, also i was unable to select storage on wipe menu, any insight?

nilofino said:
Actually I tried and it works
Click to expand...
Click to collapse
HOW?!
I have the same SM-N971N, but I Got the error of showing less storage than it has after flashing. Like, -192GB/60GB and in settings it shows 16GB, Constantly says the TA Downloader has stopped.
So it messed up totally in my case ; and i reverted back
So Help me how did you managed?!

Rafin Rahman said:
HOW?!
I have the same SM-N971N, but I Got the error of showing less storage than it has after flashing. Like, -192GB/60GB and in settings it shows 16GB, Constantly says the TA Downloader has stopped.
So it messed up totally in my case ; and i reverted back
So Help me how did you managed?!
Click to expand...
Click to collapse
Just follow the instructions!
It seems that you have selected "repartition" option (in odin options),
You can find the solution easly. Maybe installing the stock Rom helps, but plz search for the solution before doing any further actions

nilofino said:
Just follow the instructions!
It seems that you have selected "repartition" option (in odin options),
You can find the solution easly. Maybe installing the stock Rom helps, but plz search for the solution before doing any further actions
Click to expand...
Click to collapse
No to be honest, i never messed with that part lol
But if it really is how you say, then let me try this pain once again :")

nilofino said:
Just follow the instructions!
It seems that you have selected "repartition" option (in odin options),
You can find the solution easly. Maybe installing the stock Rom helps, but plz search for the solution before doing any further actions
Click to expand...
Click to collapse
can you help me finding the twrp flashable zip for N9710N?

I used the original one from official website
Rafin Rahman said:
can you help me finding the twrp flashable zip for N9710N?
Click to expand...
Click to collapse

nilofino said:
I used the original one from official website
Click to expand...
Click to collapse
OK I DID IT! But man, twrp got installed, but no magisk, nothing is installing/flashing via TWRP, idk whyy!! :")
Maybe its android 12 thats causing problem
It did successfully installed TWRP as Custom Recovery, but as for superuser, Im handcuffed now , Sed Lyf:")

Intento instalar Twrp junto con Vbmate en mi N971N y me tira este error y si solo instalo Twrp no pasa del logo de Samsung

Thank you for your hardwork!

How To Guide Flashing ColorOs 12 on Oppo reno6 5G CPH2251

Hey Guys,
Many users downgraded their ColorOs12 to ColorOs11.3 on oppo reno6 5G device due to many bugs on it, they want to install ColorOs12 but they are not getting OTA update, they are wandering how can they install ColorOs 12 back on their phone, So, here I have come up with a method to directly flash ColorOS12.
Note: Data will(or might) be erased in this method so please take backup of you data on phone.
This has been tested on Indian version, I am not sure if it will work for other countries.
I strongly recommend to take full firmware backup using method below before proceeding
Backup full firmware(ROM) of any MediaTek device using MTK client| Oppo reno6 5G | MT6877
Hello Guys, Many times we encounter a situation where we need to do some software update, flash custom ROM, install stock ROM etc, so it is advisable to take full firmware/ROM backup of your device. If required then you can flash this backup to...
forum.xda-developers.com
Step1: Pre-requisite -Installing required drivers and setup
From link below download drivers and setup.
Install mediatek driver.
Install python (during installation of python please select "install for all user" from customization and tick add path to system variable)
install usbdk.
download extarct Mtk client tool.
go to folder where you extract mtk client
View attachment 5541629
open cmd here and run below command
cd mtkclient
pip3 install -r requirements.txt
In default setting it takes 2 hour to flash but after change it takes 13 min. If you want to increase flashing speed then open mtk_daxflash.py file from library folder, search "dsize = min(length, 0x200)" and replace it with "dsize = min(length, 0x2004)" , save and close the file.
You need to close command prompt in order to take effect of change.
Reference(https://github.com/bkerler/mtkclient/issues/271)
New Qcom Mtk Driver V3.0.5.1.rar | by TUSER HP for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Download Python
The official home of the Python Programming Language
www.python.org
GitHub - bkerler/mtkclient: MTK reverse engineering and flash tool
MTK reverse engineering and flash tool. Contribute to bkerler/mtkclient development by creating an account on GitHub.
github.com
Releases · daynix/UsbDk
Usb Drivers Development Kit for Windows. Contribute to daynix/UsbDk development by creating an account on GitHub.
github.com
Step2: Download and extract the ColorOs 12 firmware
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CPH2251_11_C.27_ColorOS12_Android12_Latest.rar
drive.google.com
Step3: Flash the firmware
on cmd type below command to flash the firmware
python mtk wl "ROM location full path"
it will wait for devices.. Power off the phone, wait 10 sec then press vol up + vol down together and then plug the usb cable.
Once device detected , it will display devices information and start flashing
View attachment 5541639
View attachment 5541641
View attachment 5541645
While flashing it will dump the preloader, this file is very important so, please keep this file safely. this file may require in future.
View attachment 5541661
Step4: Boot the phone
Once flashing completed, press vol up + power button together for 30 sec. Wait for device to boot.
Step5: Flashing the preloader.bin (only if required)
In case, even after flashing completed successfully but some time device does not boot, only black screen, no charging sign either then don't panic, device has entered into emergency download mode, if you face the same then it's time to flash preloader.bin file. Follow below steps
1) download SP flash tool specific version v5.2148. (https://androidmtk.com/smart-phone-flash-tool)
2) download attached preloader.bin, scatter file and auth file from link below and place all these files at same folder.
MT6877_flashing_preloader.zip
drive.google.com
3) open sp flash tool, select download agent files from mtk folder as shown on image and load scater file and auth files respectively.
View attachment 5581171
4) In cmd run command "python mtk payload". Now press and hold vol+ vol- or all the buttons together, it should show payload sent successfully.
5) Now in sp flash tool click on Download button, it should flash the preloader successfully.
6) once preloader is flash successfully you can turn on the phone by pressing vol+ and power button together for 20 sec. If attached preloader does't flash then you can try flashing your device backup preloader.bin created/shown on step3.
so by this way we directly flashed ColorOS 12 on oppo reno6 5G.
Tips: If due to some reason flashing did not completed successfully then please press vol up and power button together for 30-40 sec to boot the phone (exit the brom mode).
Disclaimer: I have tested this method on my phone, it's 100% working but I will not responsible if damage any damage happens to your device while doing this. So do it at your own risk.

thanx nand for helping me in upgrading to coloros 12 again,this process worked successfully.

Thanks for the info.
My question is: can I use this method to remove phone branding using stock firmware image you pointed in your post?

macslui said:
Thanks for the info.
My question is: can I use this method to remove phone branding using stock firmware image you pointed in your post?
Click to expand...
Click to collapse
Hi, i didn't understand your question. Can you explain more.

Nand kumar said:
Hi, i didn't understand your question. Can you explain more.
Click to expand...
Click to collapse
Sorry. Try to better explain: I have a Vodafone branded reno 6 that accept any sim card. I only want to remove Vodafone branding (boot logo and custom app that are present only in branded phone).

Yes, you can try. I recommend you to take full firmware backup before doing this as explained in guide.

bonjour a tous quand j'écrit pip3 install -r requirements.txt j'ai une erreur :
ERROR: could not open requirements file :[Errno2] no such file or directory: requirements.txt
merci de m'aider

Please run this command from mtk folder

Nand kumar said:
Yes, you can try. I recommend you to take full firmware backup before doing this as explained in guide.
Click to expand...
Click to collapse
Hi Nand, I've done everything as you pointedout in this document and backup document.
Unfortunately I was able to flash the phone with success but now it do not turn it on anymore.
I've tried to every button combination but it remain off.
I also cannot enter brom mode anymore.
Have you some suggestion?
Thanks!

macslui said:
Hi Nand, I've done everything as you pointedout in this document and backup document.
Unfortunately I was able to flash the phone with success but now it do not turn it on anymore.
I've tried to every button combination but it remain off.
I also cannot enter brom mode anymore.
Have you some suggestion?
Thanks!
Click to expand...
Click to collapse
I was able to reenter brom mode. Now I'm reflashing again.

Hi all, everything ok now. I've flashed COS12 and now my phone is non more brand (vodafone) related.

Nand kumar said:
Please run this command from mtk folder
Click to expand...
Click to collapse
ok merci je ne savais pas comment ouvrir cmd a partir d'un fichier fonctionne très bien merci

macslui said:
Hi all, everything ok now. I've flashed COS12 and now my phone is non more brand (vodafone) related.
Click to expand...
Click to collapse
macslui said:
Glade to hear that you removed brand using thus method.
Click to expand...
Click to collapse

Unfortunatly COS12 in my opinion Is very laggy. I'm trying tio rollback to COS11 but, after flashing using your guide, the phone do not boot anymore. So I have to go back to 12. It's only my experience on COS12?

Hi, for many peoples, Color os12 was not laggy but have some bugs like battery draining etc.
For your device is not booting on color 11 then you have to flash preloader using Sp flash tool version v5.2148

Thanks Nand, allways ready to answer, thanks! Can please explain how to flash preloader with SP flash tool please? I have preloader from backup. Thanks again for your support.

Removed ...

macslui said:
Thanks Nand, allways ready to answer, thanks! Can please explain how to flash preloader with SP flash tool please? I have preloader from backup. Thanks again for your support.
Click to expand...
Click to collapse
Removed my contact details as I was getting to many message/calls on phone.

macslui said:
Hi Nand, I've done everything as you pointedout in this document and backup document.
Unfortunately I was able to flash the phone with success but now it do not turn it on anymore.
I've tried to every button combination but it remain off.
I also cannot enter brom mode anymore.
Have you some suggestion?
Thanks!
Click to expand...
Click to collapse
Same happen with me.. My phone is not bootibg up , no logo, no charging logo, not even single sign for alive please help me out help help

Cosmicsh said:
Same happen with me.. My phone is not bootibg up , no logo, no charging logo, not even single sign for alive please help me out help help
Click to expand...
Click to collapse
Removed my contact details as I was getting to many message/calls on phone.