Develop Bugs

Platinum Series Case for HTC EVO 4G from Best Buy - $30

http://www.bestbuy.com/site/Platinu...199186619&skuId=9943616&st=evo case&cp=1&lp=1
That is the case I got from Best Buy today. I compared it to the silicone one they had for $21 but I ended up with this one because it seems more durable and if you lay the phone on the screen the case lifts the screen off the surface its laying on to help protect the screen as well.
I think $32 out the door was a little pricey, but to protect my new phone it is definitely worth it.

They were sold out by the time I got there. I really wanted the one with the clip. Can't find them now. They are made by Seido from what I am hearing which they sell for $49.99 so it's a pretty good deal and solid imo.

can we get some pics? the product wasn't displayed good on there site

it's a great case. The insides are felt lined & padded. Also I had no problem slipping it in w/ the invisashield. The back of the case goes slightly past the camera lens so the phone isn't laying on it. Then there is a very small lip on the front to keep the screen from resting on a surface. A pretty solid case to use for now until more people start manufacturing for in. Hopefully serpent cases make something for this

enragedpaza said:
can we get some pics? the product wasn't displayed good on there site
Click to expand...
Click to collapse
its literally the same as the seido case that someone else posted a topic about. look at that topic and thres pictures and in the general section someone posted a video review of the seido case.
the best buy platinum case is just a re-branded seido case.

I had purchased it because a sales rep told me it was a part of the $30 bundle with the car charger and invisible shield. At the register it turns out that the rep gave me the wrong case and I bought it anyways. Early today I got my max coverage Invisible Shield installed and returned that case along with the Shield they had sold me.
The case is decent looking, definitely much better than most of the cases out now. I hope this phone gets the kind of variety in accessories that the iPhone does.

Freelancerx said:
its literally the same as the seido case that someone else posted a topic about. look at that topic and thres pictures and in the general section someone posted a video review of the seido case.
the best buy platinum case is just a re-branded seido case.
Click to expand...
Click to collapse
I think this specific case is different unless the picture Best Buy is using is incorrect. The cut outs are different. Also, Seidio themselves said in another forum that Best Buy has a Platinum Series case not made by them.
If the OP can post some pics we'd appreciate it. Thanks in advance.

There are two different Platinum Series case designs for the EVO @ Best Buy sold 3 different ways. The have the Seidio style horizontal split by itself, Seidio style with holster, and one styled like the Bodyglove case (vertical split). I picked up the Bodyglove style case - it's "rubberized" all the way around and felt lined inside.

:S thats expensive why dint you go to sprint? the body glove for the evo looks awesome I saw it at best buy and i dint like the back cover while the one in sprint i was and it was like 24 dollars.. and online its 19.99
pic
felling ripped off much? jijiji

phobos512 said:
There are two different Platinum Series case designs for the EVO @ Best Buy sold 3 different ways. The have the Seidio style horizontal split by itself, Seidio style with holster, and one styled like the Bodyglove case (vertical split). I picked up the Bodyglove style case - it's "rubberized" all the way around and felt lined inside.
Click to expand...
Click to collapse
can you post pics? the picture on their website is horrible. how do you like it?

The case was a bit pricey, but it feels VERY durable.
-------------------------------------
Sent via the XDA Tapatalk App

Hmm...sorry for the low quality. I don't know what happened.
-------------------------------------
Sent via the XDA Tapatalk App

senormatt said:
can you post pics? the picture on their website is horrible. how do you like it?
Click to expand...
Click to collapse
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.

I bought the case at Best Buy and it's great. Radioshack had Zaggs for $15 plus the 20% off accessories if you got it in the morning. I got the case at Best Buy and it's excellent. A bit pricey, but one of the better cases I've seen. Plus the silicon cases sometimes get caught up in your pocket and harder to pull out.

phobos512 said:
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.
Click to expand...
Click to collapse
Is this A EVO case?
cause it seems to have more cut outs in the side pic than the EVO has buttons on the side.

yeah, i went to BB on friday and there was a sign showing that the Platinum case, the invisashield screen protector, and a rocket dog car charger were on sale all together for $45.
the case is overall is very nice, i like how the screen is recessed and how the case does not get stuck in your pocket like a silicone case does.
i think it was a good deal for the money, seeing as how i needed car charger because the hero uses a mini usb port.

phobos512 said:
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.
Click to expand...
Click to collapse
I bought one from BB (with holster for $34.99 (giftcard)), and it def doesn't look like that. Mine's a much more rubbery look / feel. It's black. The cut-out's on yours seem much more prominent and I don't have one on the lower right side (why is one even there? just the phone volume on the upper part of the right side...).
Strnage

I got slider case instead of the snap case. Reason being if you drop your phone on a corner, the slider case isn't going to split open like an egg leaving the yolk (EVO) splattered on the ground.

senormatt said:
I think this specific case is different unless the picture Best Buy is using is incorrect. The cut outs are different. Also, Seidio themselves said in another forum that Best Buy has a Platinum Series case not made by them.
If the OP can post some pics we'd appreciate it. Thanks in advance.
Click to expand...
Click to collapse
I dont know what Seidio is trying to pull but on the inside of the fake phone cutout (on the Platinum) it clearly states Seidio, Inc, Houston Texas.
Plus, I ordered a Innocase II and compared the two side by side. They are identical. Save you cash and buy the Platinum.

Tenny said:
I bought one from BB (with holster for $34.99 (giftcard)), and it def doesn't look like that. Mine's a much more rubbery look / feel. It's black. The cut-out's on yours seem much more prominent and I don't have one on the lower right side (why is one even there? just the phone volume on the upper part of the right side...).
Strnage
Click to expand...
Click to collapse
As I stated previously there are (2) different case designs from Best Buy - one like the Seidio Innocase and one like the Body Glove. The one I pictured is indeed for the EVO (it came with a "fake" cardboard EVO inserted in it). The "extra" port cutout you're seeing is how you take it off the phone - you insert a coin and twist it to pop the two halves apart (JUST like the Body Glove case).

Droid 2 Case Reviews!

I just reviewed Droid 2 cases here:
Droid 2 Hard Case:
http://droid2accessories.com/droid-2-accessories/droid-2-hard-case/
Body Glove Droid 2:
http://droid2accessories.com/droid-2-accessories/droid-2-case-review/
Both you can get at Verizon store but Amazon is like 30% cheaper.
Also, I like the hard case better, the Body Glove is waaay too bulky, they added waaaay too much padding, your Droid 2 becomes like a big brick afterwards. But might work for those of you who want a sturdier Droid 2.

Hey thanks for pointing out these rad cases. In the Amazon page it claims to come with a micro fiber cloth and a "screen protector". Did the kit you reviewed come with some sort of clear plastic stick on deal? I hope so, I'm itching to by the white one and storm trooper this beast.
Thanks dude.

The one I bought
The one I bought is the same but I bought it at my local Verizon store for $24.99 doesn't come with a screen protector. darn it. But yeah, that link is the best deal I found and is the exact same case, yey.

Thank you sir I'll post back with the quality of the screen protector, ordering NAOWWW!

Hey thought I'd let you know this case is fantastic! Fits much better than I expected and the white case got me the storm trooper look I was goin for.
I also ordered the OEM extended battery from Verizon (BP7X) and am happy to report that despite its larger size, the case still fits perfect! In fact, I think these were designed for BP7X.
If you look at Zeedomax's pictures, the case has a swell over the battery compartment... with the stock battery installed, there is space between phone and case. With BP7X, like a glove.
I'd also like to say the free screen protector isn't half bad. No glare, no rainbow effect, and doesn't inhibit touch screen usage. The bad: it doesn't take much to scratch. I scuffed it up installing with a credit card and my keys have already done a number on it.
Definitely get this case and the battery!
Use promo code "BAT30" for 30% off and free overnight shipping. (Mine was $37 or so.)

I got the 'carbine' case when I bought mine. It was $25 instore. Also Good luck finding matte screen protectors anywhere. I have somewhat tacky fingers and find that glossy protectors make my fingers catch. I ended up buying a iphone matte protector from best buy and trimming it down to fit (bit of irony no? haha!) stupid things where $18 to boot...

zedomax said:
The one I bought is the same but I bought it at my local Verizon store for $24.99 doesn't come with a screen protector. darn it. But yeah, that link is the best deal I found and is the exact same case, yey.
Click to expand...
Click to collapse
teeBOMB said:
Hey thought I'd let you know this case is fantastic! Fits much better than I expected and the white case got me the storm trooper look I was goin for.
I also ordered the OEM extended battery from Verizon (BP7X) and am happy to report that despite its larger size, the case still fits perfect! In fact, I think these were designed for BP7X.
If you look at Zeedomax's pictures, the case has a swell over the battery compartment... with the stock battery installed, there is space between phone and case. With BP7X, like a glove.
I'd also like to say the free screen protector isn't half bad. No glare, no rainbow effect, and doesn't inhibit touch screen usage. The bad: it doesn't take much to scratch. I scuffed it up installing with a credit card and my keys have already done a number on it.
Definitely get this case and the battery!
Use promo code "BAT30" for 30% off and free overnight shipping. (Mine was $37 or so.)
Click to expand...
Click to collapse
Thanks for the info guys. I'm curious if the keyboard opens and closes as smoothly as without case. I briefly tried one on my phone and it was noticeably different as if the phone was rubbing against the case while opening and closing.

Yes, there are two clips on the top half of the bottom cover (confusing I know) that rub against the back of the screen when sliding open. Now even though
I noticed a difference immediately, I was not turned off by this at all. It has warn the clips a bit since then and seems to slide a little more effortlessly now...
But to answer your question, NO the case does not hinder the phone in any SERIOUS way. I'd also like to note that this case will drive you crazy on the top row of your keyboard for the first day or two, but now I've already forgotten what it felt like with the case off. Basically, you had about 1-2mm's of space between the top row and the screen. Now that space is non existent. You'll get used to it!
The only thing that seriously erks me, is all the crap that's getting stuck between the case and the phone from extended miles in my pocket. I've already scuffed up the shiny metallic front face pretty bad.

I thought since we are discussing cases, I'd share the slip case I got for my D2:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170524799245
It wasn't made for the D2, but it fits perfectly and it was cheap. Its already protected my phone from a drop of a few feet to a concrete floor. Most of all, I love the Android at the bottom of it, I thought it was perfect, especially for the price!

Do these cases have a hole for the noise cancelling mic?

http://www.skinomi.com/motorola-droid-2-light-wood-skin-protector.html
Not a case, but I just got this piece of awesomeness. Love it. Makes the phone look 10,000 times sexier.

MissionImprobable said:
http://www.skinomi.com/motorola-droid-2-light-wood-skin-protector.html
Not a case, but I just got this piece of awesomeness. Love it. Makes the phone look 10,000 times sexier.
Click to expand...
Click to collapse
That's sick! I'd get it if I didn't already have a case.
hwchouse said:
I'd prefer and recommend Melkco leather cases found at Amazon.
Click to expand...
Click to collapse
You are the biggest spamming tool I've ever seen on XDA forums. Go away. This is all you post on various devices' forums.

Yeah, this skin is awesome. There are some other phones that it looks even better on.
As to our friend hwc there, I went ahead and reported him so I'm hopeful he'll be banned.

MissionImprobable said:
Yeah, this skin is awesome. There are some other phones that it looks even better on.
As to our friend hwc there, I went ahead and reported him so I'm hopeful he'll be banned.
Click to expand...
Click to collapse
Good call. I'll report him as well. Love your signature btw! Haha

Has anyone tried this holster/combo case?

http://www.ebay.com/itm/Impact-Resi...ccessories&hash=item519b281abc#ht_2288wt_1270

I just saw that on ebay. I'm thinking about picking that one up. Doe's not look bad for 20 bucks.

looks pretty good to me. something like the ones seidio makes.

I got one of these and it is the exact same case sprint sells.
Sent from my SPH-D710 using Tapatalk

except this clips over the case. sprint clips over the phone.

I went ahead and pulled the trigger on one. We'll see in about a week...

I had originally purchased the carbon fiber case with the built-in kick stand from accessorygenie on eBay (I liked it when I tried it at my local Sprint store, but it was way overpriced), but what I received in the mail today was the case with the Technocel holster and the extra micro-USB cable (as described in the OP) due to a "glitch in the system." They are sending me the actual carbon fiber case free of charge and they didn't require me to send back this holster case to them.
Is there anyone here that would be interested in purchasing this Technocel holster case + micro-USB cable from me for half of what it's going for on eBay? I've uploaded four pictures of the actual product and USB cable on my bed. I didn't realize this before, but the actual case is comprise of two parts: the phone case that encases the Epic 4G Touch, and the part with the clip attached to the holster (which, of course, is bigger than the case itself in order to actually hold the phone and case in place). The very last sample picture I've uploaded features a close-up of the clip and the Technocel logo that is on it. The package is still unopened, but has a small dent in the lower left hand corner of the plastic, presumably from the shipping.
I'm willing to part with this for around $10-12 if anyone is interested in biting. PM me for more details or additional questions.
And just in case you were wondering where it would be mailed from, I live in Norman, OK. I was stuck on a Palm Pre on its last legs for the entire two-year duration on was on contract, and I'm so, so, soooooo happy to have finally pulled the trigger to get a new smartphone like the E4T. It's phenomenal.
EDIT: I just realized I submitted this post before I had a chance to let my pictures finish uploading. =(

Bought the case/holster last week it arrived last friday. Quality isnt the greatest. Case outside the phone doesnt snap around the phone as tight as i would like. Small drop and it comes apart. Holster needs a stronger spring on the clip that hold the phone in place. Wore it to work today for the first time and it came right out of the clip twice when I barely even touched the thing. Should have seen my face when a lady say "excuse me, is this yours" and walks up holding pieces in her hand :O . Im just gonna rock it with a tpu in my pocket until seidio or otterbox releases a case/holster combo.

That blows. I order the case on sunday. It should be here this weekend. I may a well put it right in the trash.
Sent from my SPH-D710 using xda premium

damit i ordered it too. Will the tpu case fit with the holster?

Got my case today. I've been using it for a couple hours. Nothing like the case/ hoster I had for my evo 4g. But doing the job for right now.
If I had to choose again. I would pay the extra ten at the sprint store to get a my reliable case.
Sent from my SPH-D710 using xda premium

i got the one sprint sells, and its not that bad at all. it fits super snug against the phone, only gripe is that it's not as easy to put into the holster like most holsters....takes a lil getting used too

Been using this case/holster today. (directly from the ebay link)
The case fits fairly snug around the phone, though the case itself dosen't seem to click together 100% (more like 99%, small gaps). It fits into the holster quite well. I do IT work in a factory/office environment, so I do a lot of walking around, crouching, laying on the ground, etc. The case hasn't once popped out of the holster on it's own. The holster seems to translate vibration from the phone fairly well so you can tell when your phone is going off. It's also nice that the holster keeps the headphone port accessible.
I have dropped the phone once while in the case. From about 3 feet onto concrete. It popped right out of the case, and while that might seem bad, I think it's more by-design, since it disperses some of the energy from the fall by the case absorbing it and coming apart. The case snapped right back on, no problem, and the phone is fine.
Overall, I like it well enough to keep it for awhile, until a more premium case/holster combo comes out. $20 seems a little steep for it, $12 - $15 would be a bit more fair considering the quality; though it was free shipping, so that kind of evens it out.

has anyone dropped their new Note 4 yet?

in case you haven't, let me share my experience:
as with most of us, i've done my best to handle my new phone with care, especially since i was one of the many that preordered the same weekend preorders were opened up. i have had the phone since launch day, i have a variety of cases for it, but not the most optimal case of course. (i'm a woman, it's hard to find fashionable protection.) i learned early on with the Note 2 and the Note 3 that the digitizers can be broken if the phone is dropped at just the right angle, so i thankfully have everything already backed up with Verizon Cloud, (call logs) SMS Backup/Restore, (texts/MMS) Helium, (game data) and Google+ (photos-- on low resolution, storage is unlimited.) today while digging in my purse, my phone fell out from about 3 feet up. landed face down on the hard tile of the womens' restroom. didn't think anything of it, because it was such a low height, just picked my phone up, plopped it back in my purse, finished shopping. (like a woman.)
when i went to check the time, i noticed the phone didn't respond. instantly i thought, "maybe i just need to power it back on, since it fell." held the power button down, 3 seconds, 5 seconds, 8 seconds, nothing. did a battery pull, left it out for about 5 minutes, replaced. nothing.
now, had i not had everything already backed up, i might have had a minor melt down, but i still had my S5 on me (literally, it was in my purse) swapped the SIM, and then cried on the inside. i put the phone on my car charger (generic model) and there was still no response, so i thought about if i should have my computer friend fix it or if I should go ahead and try my luck with insurance, with it being less than 30 days i hoped that maybe something warranty wise would still apply.
got home, put the phone on the charger. not that it needed it, but figured, nothing else could be done. did a few things around the house, then came back about 15 minutes later and saw that the screen had lit up and the phone was charging. lo and behold, i hit the power button, and it booted back up. insert praise dance here.
maybe Samsung finally did learn their lesson with the digitizers being so easily broken in the Note series. one thing that sold me on the Note 4 was the drop tests that were performed, which gave me (some) belief that i wouldn't have to deal with this problem. (link here for the drop test: http://youtu.be/Jj3Jy5ufhaY)
but in case anyone was wondering, it looks like it will survive a drop or two. and i have since thrown my Spigen case on there cause a chick will take no further chances going forward. (should, God forbid, the worst happen, i will update this post.)

No I personally hadn't dropped my phone yet, and hopefully I never will. I generally don't use protective cases on my phones, but I think I will invest in one once I can find a good aftermarket case that is made for the Verizon variant. Definitely don't want any scratches on this beauty

yeah, i've got one small unnoticeable knick in the metal edge up by the IR blaster. the initial case i chose left the top and bottom edge of the phone exposed (easier to handle) but i've definitely learned my lesson.

I beat the hell out of my note 2 for two years without a case or screen protector. Screen has one deep scratch about half an inch long and the corner chrome plastic is kinda mangled but I never cracked or broke the screen. Running my note 4 the same way.

derrtydee said:
in case you haven't, let me share my experience:
as with most of us, i've done my best to handle my new phone with care, especially since i was one of the many that preordered the same weekend preorders were opened up. i have had the phone since launch day, i have a variety of cases for it, but not the most optimal case of course. (i'm a woman, it's hard to find fashionable protection.) i learned early on with the Note 2 and the Note 3 that the digitizers can be broken if the phone is dropped at just the right angle, so i thankfully have everything already backed up with Verizon Cloud, (call logs) SMS Backup/Restore, (texts/MMS) Helium, (game data) and Google+ (photos-- on low resolution, storage is unlimited.) today while digging in my purse, my phone fell out from about 3 feet up. landed face down on the hard tile of the womens' restroom. didn't think anything of it, because it was such a low height, just picked my phone up, plopped it back in my purse, finished shopping. (like a woman.)
when i went to check the time, i noticed the phone didn't respond. instantly i thought, "maybe i just need to power it back on, since it fell." held the power button down, 3 seconds, 5 seconds, 8 seconds, nothing. did a battery pull, left it out for about 5 minutes, replaced. nothing.
now, had i not had everything already backed up, i might have had a minor melt down, but i still had my S5 on me (literally, it was in my purse) swapped the SIM, and then cried on the inside. i put the phone on my car charger (generic model) and there was still no response, so i thought about if i should have my computer friend fix it or if I should go ahead and try my luck with insurance, with it being less than 30 days i hoped that maybe something warranty wise would still apply.
got home, put the phone on the charger. not that it needed it, but figured, nothing else could be done. did a few things around the house, then came back about 15 minutes later and saw that the screen had lit up and the phone was charging. lo and behold, i hit the power button, and it booted back up. insert praise dance here.
maybe Samsung finally did learn their lesson with the digitizers being so easily broken in the Note series. one thing that sold me on the Note 4 was the drop tests that were performed, which gave me (some) belief that i wouldn't have to deal with this problem. (link here for the drop test: http://youtu.be/Jj3Jy5ufhaY)
but in case anyone was wondering, it looks like it will survive a drop or two. and i have since thrown my Spigen case on there cause a chick will take no further chances going forward. (should, God forbid, the worst happen, i will update this post.)
Click to expand...
Click to collapse
I think that it's a matter of luck when you drop a phone. I've dropped two.
First one was a Sprint Epic Touch (galaxy s2, 4.5" version), it fell out of my jacket inside pockets right onto a tile floor. It made an spectacular sound, bounced a few times, and lost a back plate and a battery. Nothing else was even remotely damaged.
The second one was me bending trying to get some air in my car's tires, and phone slipped out of my jacket pocket (again). It landed hardly on pavement, but suffered only a minor scratch on the edge.
I wasn't even worried at the time - Galaxy S3 always felt like it was built like a tank, unlike S4 which I also owned.
This new Note4 feels durable in the hand, but the sheer size of the screen screams "fragile." That's "Fra-gee-lee" for uninitiated.

Nothing yet, and I am going naked, Neo Hybrid is reasonably thin, but it feels so much better without a case.
Sent from my Galaxy Note 4 on Verizon unlimited!

I love the feel of the n4 without a case but I learned my lesson of going case less when I dropped my note 3 from a very low height and got a surface Crack that spread over the next few days. I take it out the case at night when I'm in but when I'm out this baby is covered with a screen this large it will probably shatter pretty easy. To each his own though

YES! Before the DE came out, I was stripping insulation off a 12 gauge wire........
with my White Note 4 in my shirt pocket. When the insulation suddenly gave with a snap. The Note 4 jumped up out of my shirt pocket about 5 foot high and landed on the left front bottom corner on concrete then flipped over on it's glass screen face down. I was afraid to pick it up. As far as I can tell not a scratch on the screen but the Aluminum has a dent where it meets the glass. That slight gap may have saved the screen.
I am coming from the Note 2 and I had all my work shirts modified to fit the Note 2 snug. After the accident I have added a Home made Elastic Strap on top to hold the phone in place. I have not been using any case or screen protector because they slow me down and time is money. I got to be quick on the draw.

not yet... although i had a close call in the gym today with a 100lb dumbbell... i am not sure how long this is relationship is gonna work out...

doctor-cool said:
with my White Note 4 in my shirt pocket
Click to expand...
Click to collapse
As soon as I read that first sentence, I knew this story wouldn't end well

I got an Otterbox Defender case for mine, $44.99 with discount through verizon's website.. Absolutely love it, Otterbox has gotten a lot better over the years, and I've got huge gorilla hands so the extra couple mm doesn't bother me :cyclops:

BizzLeonDaCouch said:
I got an Otterbox Defender case for mine, $44.99 with discount through verizon's website.. Absolutely love it, Otterbox has gotten a lot better over the years, and I've got huge gorilla hands so the extra couple mm doesn't bother me :cyclops:
Click to expand...
Click to collapse
Man I have the same case it's awesome .yea I have big hands too lol. Only thing is I ripped the built in screen protector out and replaced it with a normal stick on one. The built in one was horrible and made a loud click every time i tapped it. I have a cheap tempered glass one coming Monday hopefully it fits in the defender.

You people that go caseless are imho tempting fate and then are upset when your $800 phone shatters. I fix people's phones at cost that I know, most of which are iphones. At least those screens are fairly cheap and easy to replace. An Iphone 5S screen is $70 for oem at the local store. I asked about how many galaxy's they repair and the answer was very few. Why I asked, they don't break as easy??? No was the reply, the amoled screen is super expensive. A quick check on ebay......Minimum $170 for a Note 3 screen.
For about $20 you can get a simple thin rubber type case and tempered glass screen protector. You get both drop protection, thin profile, and screen protection. Seems like a no brainer, but if you have the money to replace such and expensive device I guess it's not an issue lol.

when i went to local verizon store to pick up my note 4, the rep who helped me dropped the phone 3 feets height to the table we were on while unboxing it!!! needless to say, i was unhappy and relieved that no dent or scratch found. that store was the only store that had white note 4 in stock and i wanted to beat the deadline to trade in my old phone for $200, so i still took it.

I droppped mine at the gas station. No damage suffered despite taking a perfect hit in the middle of the screen on the corner of a curb. I had a spigen tough armor case on it to lessen the blow to the edges of the phone once it bounced around on the ground and prevented any chips im sure, but the screen held up great and didn't receive the slightest bit of damage.
edit: this is the case i have. perfect amount of protection for me (SGP11139)
http://www.amazon.com/gp/product/B00MAWQU14/

I got mine the Thursday they were released. I was using the Spigen Tough Armor case and had the phone in the pocket of my sweatshirt. I squatted down to look in a delivery box and the phone fell out from maybe a foot high - but it landed exactly face down. The s-pen still worked, but it would not respond to my fingers at all.
Fortunately I was able to take it back to Best Buy and they just swapped it for a new replacement. I'm using an Otterbox Defender now until Seidio makes an Active or Dilex case since the Defender adds a good 1/2" or more to the width of the device and has no kickstand despite costing $70 bucks.

revbones said:
I got mine the Thursday they were released. I was using the Spigen Tough Armor case and had the phone in the pocket of my sweatshirt. I squatted down to look in a delivery box and the phone fell out from maybe a foot high - but it landed exactly face down. The s-pen still worked, but it would not respond to my fingers at all.
Fortunately I was able to take it back to Best Buy and they just swapped it for a new replacement. I'm using an Otterbox Defender now until Seidio makes an Active or Dilex case since the Defender adds a good 1/2" or more to the width of the device and has no kickstand despite costing $70 bucks.
Click to expand...
Click to collapse
The convert Is in development was my favorite note 2 case they never made it for the n3 though. I have a tough armor it's going back the kickstand is a joke, worst I have used on a supposedly high quality case. FYI I have the defender you know the holster can be locked and used as a stand right? ..

gcforreal said:
The convert Is in development was my favorite note 2 case they never made it for the n3 though. I have a tough armor it's going back the kickstand is a joke, worst I have used on a supposedly high quality case. FYI I have the defender you know the holster can be locked and used as a stand right? ..
Click to expand...
Click to collapse
Thanks but I stopped carrying my phones on my belt a few years ago so the belt clip just sits in a drawer. I had Otterboxes and others and kept knocking them off my belt and causing them to fall. The final straw was when one fell in a gravel parking lot the same day I bought it and it chipped the screen through the protector. You'd think though for $70 that they'd include a nice metal kickstand on the actual case like Seidio does.
Yeah, I agree that kickstand was a complete joke. Everything else on that Spigen case felt inferior to any other case I've ever used too, but that kickstand was some awfully weak sauce.

Aw that sucks about the belt clip thing you got me worried I mainly use mine at the gym when I don't want the phone annoyingly bouncing in my pocket. I just can't believe spigen would release something so flimsy and half assed. I caught it on sale for 11 bucks and I still felt let down lol. Honestly the Verizon shell holster combo has the best kickstand in my opinion. Just wished it covered the top and bottom of the phone.

nabbed said:
This new Note4 feels durable in the hand, but the sheer size of the screen screams "fragile." That's "Fra-gee-lee" for uninitiated.
Click to expand...
Click to collapse
Must be Italian!

Poor case selection

I'm trying to find a case with a belt clip but I've only found one believe it or not. Searching Amazon I've found the same case rebranded a hundred times over.
Problem is, I bought one and it has a critical flaw. With the case on the phone, insert it into the slip holster (aka clamshell) and the railing of holster constantly pushes the power button, so every time I pull out the phone, it reboots! I though it was my phone at first. Anyway, all designs on Amazon are the same! Just overseas made and sold by differing names.
I checked eBay too
I have found some nice horizontal cases (with a flap) that I think will work but I'm feeling like I will never see a true clamshell or clip design for this device...
I don't pocket my phones at all. I find it ruins the finish and is uncomfortable to me.
Just a rant. Anyone know of a well built case that offers a belt clip. I'll pay the price for a quality case, gladly!
Sent from my ZTE A2017U using Tapatalk

A crazy idea that might work....
I had an idea! The Axon 7 measures 5.97 x 2.95 x .31 and the Google Pixel XL measures 6.09 x 2.98 x .33. With my TPU case on, I think if I purchase the Seidio spring clip holster this might just fit the bill. The side rails might be cutting it close, but I am willing to take the chance.

Edit: am dumb
Edit2: I was right, it has a belt holder: Case with holder

Boutchoo said:
Edit: am dumb
Edit2: I was right, it has a belt holder: Case with holder
Click to expand...
Click to collapse
I tried that one. It has a critical design flaw. When I put it into the belt holder, the belt holder pushes, and holds, the power button hard-rebooting my phone every time. I think the inner rubber phone case fits loosely which causes too much material over the power button. LOL Otherwise it isn't that bad of a combo.
Sent from my ZTE A2017U using Tapatalk

emtownsend said:
I tried that one. It has a critical design flaw. When I put it into the belt holder, the belt holder pushes, and holds, the power button hard-rebooting my phone every time. I think the inner rubber phone case fits loosely which causes too much material over the power button. LOL Otherwise it isn't that bad of a combo.
Click to expand...
Click to collapse
Amazon. Com

Received my Poetic Revolution series case for my A7 today. I am very impressed by it thus far, especially by the built-in screen protector since there are no full screen tempered glass protectors for the A7 due to the curved glass. I don't plan on tossing my phone around to test out the durability but it feels like it is going to offer some good protection all around.

Is there any flip cover case with sleep/lock function, like the original?
Couldn't find any, on ebay or EU amazons, except the original from US which costs 55 $ with postage to Europe...
Nillkin, who has such nice quality and economy cases, has not produced an Axon 7 case.
Any suggestions pleaseeee ?

I'm very happy with the one given in the box.
Envoyé de mon ZTE A2017G en utilisant Tapatalk

nek4d said:
Is there any flip cover case with sleep/lock function, like the original?
Couldn't find any, on ebay or EU amazons, except the original from US which costs 55 $ with postage to Europe...
Nillkin, who has such nice quality and economy cases, has not produced an Axon 7 case.
Any suggestions pleaseeee ?
Click to expand...
Click to collapse
You can buy the original from ZTE or B&H. Both dropped the price to 9.99 USD. B&H I know ships internationally-don't know about ZTE.
https://www.zteusa.com/products/accessories/
https://www.bhphotovideo.com/c/product/1297278-REG/zte_a2grcas_clear_view_folio_case.html

I just ordered this metal case.
https://www.amazon.com/gp/aw/d/B06XZ3PV82/ref=ya_st_dp_summary

borijess said:
I just ordered this metal case.
https://www.amazon.com/gp/aw/d/B06XZ3PV82/ref=ya_st_dp_summary
Click to expand...
Click to collapse
Please report back when you get it, as I'm very curious how it works with signal - every metal case I've ordered in the past for my other phones has reduced the signal slightly to significantly. I had thought the slightly wasn't a problem - what's a decrease of 1-2 bars when you're at full strength anyway?
The problem is when you're in a poor signal area and you NEED that 1 bar and you have to take the phone out of the case to work!
On another note, I wish that someone would make a simple backless bumper case - I miss those days when I could use my phone practically naked with just a protective bumper around the sides.

rEVOLVE said:
Please report back when you get it, as I'm very curious how it works with signal - every metal case I've ordered in the past for my other phones has reduced the signal slightly to significantly. I had thought the slightly wasn't a problem - what's a decrease of 1-2 bars when you're at full strength anyway?
The problem is when you're in a poor signal area and you NEED that 1 bar and you have to take the phone out of the case to work!
On another note, I wish that someone would make a simple backless bumper case - I miss those days when I could use my phone practically naked with just a protective bumper around the sides.
Click to expand...
Click to collapse
Just got the case today. I ordered a black one and i got a silver mirror looking back. I will be sending the case back. The back is plastic and it very reflective. The only metal is the bumper.

borijess said:
Just got the case today. I ordered a black one and i got a silver mirror looking back. I will be sending the case back. The back is plastic and it very reflective. The only metal is the bumper.
Click to expand...
Click to collapse
Ah, sorry to hear about that - I was hoping you had good news, but it seems not only did you not get what you wanted, but have to go through a bit of inconvenience to return the product. I appreciate that you shared your experience, though- thanks a lot for saving me from the same mistake.

I've using my poetic case for a few months now, and thus far I have a few complains
- flaps they remain open after a while, I cut them off both recently
- screen protector awful scratches easily, removed it and used a higher quality protector instead
now is near perfect the case plays well with third party screen protectors and is VERY sturdy, has saved me from QUITE a few drops

emtownsend said:
I'm trying to find a case with a belt clip but I've only found one believe it or not. Searching Amazon I've found the same case rebranded a hundred times over.
Problem is, I bought one and it has a critical flaw. With the case on the phone, insert it into the slip holster (aka clamshell) and the railing of holster constantly pushes the power button, so every time I pull out the phone, it reboots! I though it was my phone at first. Anyway, all designs on Amazon are the same! Just overseas made and sold by differing names.
I checked eBay too
I have found some nice horizontal cases (with a flap) that I think will work but I'm feeling like I will never see a true clamshell or clip design for this device...
I don't pocket my phones at all. I find it ruins the finish and is uncomfortable to me.
Just a rant. Anyone know of a well built case that offers a belt clip. I'll pay the price for a quality case, gladly!
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
I spent tons of time looking for cases for the Axon 7 and found that honestly there are 5 variants. The poetic tank case, the Spigen "rugged armor" case, the dual layer (rubber plus plastic) case thats rebranded by tons of companys, the "iron man" dual layer case (Also rebranded by various companies), and the belt clip one with terrible reviews because of the problem you stated. There are a few others that are some variation of the above or some see-through ones with bumpers but honestly none seemed satisfactory.
In light of this I decided to opt for ZTE's own hybrid material case. I haven't dropped the phone since I put it on but it is definitely sturdier than the case they included with the phone and the material is hard enough yet flexible enough that it seems like it would be able to take a hit without causing any damage to the phone. It also fits really well and is not bulky either. I realize this might not be what you're looking for but for some strange reason good quality cases are far and few between for this phone (perhaps due to some kind of licensing issue from ZTE?) so that case might be your best bet :/. You could potentially get some other kind of belt holster and have this phone sit in it while in the case.
Link for ZTE case: https://www.zteusa.com/axon7-co-mold-protective-case

Aluminum doom
Though this question was posed back in May , I didn't see a response answering the question so I'll answer it for you in case anyone else is curious . I purchased the Mirror case for $3.89 on eBay in piano black . ( I always seem to find better deals there and easier to navigate then the Big A but that's just my opinion). It is indeed a beautiful case and mine came in with no damage whatsoever . Indeed it is a tight fit putting the back on but once you get it in place everything does line up perfectly . The concern from another member was whether or not the signal would be blocked with the aluminum casing around the edges . The answer is a very easy yes . The signal degrades horribly . I only get two bars inside my home and with the case on it dropped to 0 with no signal whatsoever . It does get some signal outside but it's not worth using this case if I may be missing important calls or messages from clients . Sadly it's just a beautiful case with poor execution with the materials involved . Fortunately I didn't lose much on the case itself . I really wanted this one to work strictly because it looked so awesome even though it's not great when it comes to protecting the phone itself in a drop . Hope this helps if anyone else was curious about the case.
[=rEVOLVE;72176896]Please report back when you get it, as I'm very curious how it works with signal - every metal case I've ordered in the past for my other phones has reduced the signal slightly to significantly. I had thought the slightly wasn't a problem - what's a decrease of 1-2 bars when you're at full strength anyway?
The problem is when you're in a poor signal area and you NEED that 1 bar and you have to take the phone out of the case to work!
On another note, I wish that someone would make a simple backless bumper case - I miss those days when I could use my phone practically naked with just a protective bumper around the sides.[/QUOTE]