HI
I have a Samsung galaxy tab 3 lite SM-T111 and the tab had a problem about /efs invalid argument.
i was tried to fixed it already by install twrp recovery and the efs is worked but after i flashed back to stock firmware THL-T111XXUANB2 after pass on odin it suddenly showed
E: /system invalid
/cache invaild argument
then switch off automatically.
Now my device is stuck on factory mode only and even i tried to firmware restore by odin it shows nand write start failed. I tried to restored with pit file also it let pit file pass but when it started to flash firmware it failed on nand write start!
it that anyway to fix it guys?? May be my pit file is wrong or something happening. So pls let me know guide way to fix it. I hope that wont be emmc chip error.
Thanks you guys.
no one want to help..
help samsung sm t111 flash failed
kohtoo said:
no one want to help..
Click to expand...
Click to collapse
help me
kohtoo said:
HI
I have a Samsung galaxy tab 3 lite SM-T111 and the tab had a problem about /efs invalid argument.
i was tried to fixed it already by install twrp recovery and the efs is worked but after i flashed back to stock firmware THL-T111XXUANB2 after pass on odin it suddenly showed
E: /system invalid
/cache invaild argument
then switch off automatically.
Now my device is stuck on factory mode only and even i tried to firmware restore by odin it shows nand write start failed. I tried to restored with pit file also it let pit file pass but when it started to flash firmware it failed on nand write start!
it that anyway to fix it guys?? May be my pit file is wrong or something happening. So pls let me know guide way to fix it. I hope that wont be emmc chip error.
Thanks you guys.
Click to expand...
Click to collapse
U are using tab 3 neo SM-T111 if are using any rom in this tab so plzz help me I also want to flash a ROM in my tab I am also using tab 3 s
Smt111
Use Odin v3.07 and check Nand Erase All
hello guy's, my samsung today work's fine and from one hour not work at all - dead, i try to turn on no lucky, enter recovery no lucky, enter download mode not lucky
i found on forum about debrick.img and put on 16GB card, and phone vibrate and turn on but stuck like on the pictures mmc read failed, any sugestion, all the best
http://postimg.org/image/ar0zp4olp/
http://postimg.org/image/h3g4yyrnx/
gigidel said:
hello guy's, my samsung today work's fine and from one hour not work at all - dead, i try to turn on no lucky, enter recovery no lucky, enter download mode not lucky
i found on forum about debrick.img and put on 16GB card, and phone vibrate and turn on but stuck like on the pictures mmc read failed, any sugestion, all the best
http://postimg.org/image/ar0zp4olp/
http://postimg.org/image/h3g4yyrnx/
Click to expand...
Click to collapse
Sounds like the emmc memory is dead. Try to use these debrick images that I had taken from my i9195 some time ago. Extract first. https://drive.google.com/file/d/0B_vlSjY0nNrkX001ZUs4ZUF6dXc/view?usp=sharing
https://drive.google.com/file/d/0B_vlSjY0nNrkSFRVUERoTkF5cnM/view?usp=sharing
thanks a lot Mountains788, i try this two debrick.img, but no lucky, still the same mmc read failed
gigidel said:
thanks a lot Mountains788, i try this two debrick.img, but no lucky, still the same mmc read failed
Click to expand...
Click to collapse
I had the same issue, 2days ago (also so an Galaxy S4 mini).
I solved it by holding the 'volume down + home button' while connecting/disconnecting the phone to my/from laptop.
I have the same problem
When i put the sdcard with debrick image in my phone, It says:
BOOT RECOVERY MODE
CHECK BOOT PARTITONS..
COPY FROM T-FLASH..
BOOT RECOVERY..
WRITE 139008 sectors..
FLASH WRITE FAILURE
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-I9190
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
BOOTLOADER RP SWREV: 2
WRITE PROTECTION: Enable
And when i connect it to pc to flash by odin, it says "There is no pit partition"
When i put the pit file in odin, it says the same
What should i do?
Did you get it to work? I have the exact same problem with the same phone (GT-I9190) !!!!
Symptoms:
1. Boot loop. GT-N7102 logo comes and the device reboots.
2. Can go to download mode. Model no. GT-N7102 is visible
3. Recovery mode-Android shows up for ~4 seconds and then phone reboots and goes into a boot-loop.
Was running N7102ZCUEOJ1_JB43_deodex_gapps_root_noknox_lite_by _neopunk88 (since March'16), when the phone suddenly decided to go into a boot-loop.
The phone was rooted. I had installed LSpeed the previous night and had set it to run in recommended mode.
What I have tried so far
1. Odin 3.07, 3.09 etc
2. stock recovery flash fails
2. tried to flash N7102ZCUEOJ1_N7102CHNEOJ1_N7102ZCUEML1_HOME.tar.md5 (last stock), but fails
3. After I had exhausted possibilities, tried the following pit files, one at a time, first from here and then here and then here along with the stock ROM. All pit files seem legit and the correct ones, but I have no way to verify. I have tried first without and then with re-partition option selected in Odin. Flash fails.
4. All drivers, USB ports and cable okay as I can flash my wife's S6.
Phone still going into download mode.
Odin fail modes
1. without pit file, while flashing either recovery or stock rom, Odil fails just after sboot.bin at NAND write-start.
2. with pit file and re-partition checked, Odin gets stuck in "get pit file for mapping"
3. with pit file but re-partition unchecked, Odin fails is the same as (1)
4. I have tried setting Odin compatibility to XP but it does not result in anything different. I haven't needed xp compatibility setting this while flashing anything before.
Please could I have some guidance on what options I have left and the files, if I am not using the correct ones?
My belief is that if I can get to the download mode, there has to be way to un-brick the phone..fingers crossed.
Thanks in advance.
UPDATE: Fixed phone by replacing the motherboard from here. Everything working fine now.
still waiting for a response..
@jam_27 It is possible that eMMC got corrupted. (it's a hardware fail)
If I were you I would try to flash TWRP. http://www.twrp.me - For N7100, as it doesn't matter for recovery.
READ: http://forum.xda-developers.com/galaxy-note-2/help/nt7100-wont-boot-wont-charge-recover-t3504290
Thanks, TWRP recovery flash fails at NAND write start.
jam_27 said:
Thanks, TWRP recovery flash fails at NAND write start.
Click to expand...
Click to collapse
Below the JTAG tool report from FoneFunShop UK
eMMC Flash Memory Chip is damaged
===============
= JTAG REPORT =
===============
Open serial port...OK
Connecting to the RIFF Box...OK
Connecting to the dead body...OK
Detected dead body: DETECTED
Set I/O Voltage reads OK, TCK Frequency is OK
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Flashing the dead body...
No Resurrection Data is available for the eMMC Chip with Capacity = 0B
ERROR: Failed use to Resurrection Data for the eMMC Chip with Capacity = 0B
ERROR: Selected FLASH Chip was not initialized by the DCC Loader.
----
I wont be able to replace the emmc chip myself (don't have the correct tools) but should be able to replace the motherboard.
Any other suggestions before I open up the until.
Hi, i have a problem with my phone,latest stock rom,no root,i found it stuck on boot screen after i use a non original cable with original charger, is SDS or i can fix it? when i try to use odin with stock rom i get nand write fail everytime ,i see the phone conected in device manager(photo) , in recovery i see red errors and when i enter in download mode odin see the phone but is unable to write, can you help me to fix this or any solution to fix it with usb or sd card only because i dont have profesional tools (box)? thanks
What is the Odin error? You can see it in the log.
audit13 said:
What is the Odin error? You can see it in the log.
Click to expand...
Click to collapse
nand write start fail
What file is Odin trying to flash when it fails?
audit13 said:
What file is Odin trying to flash when it fails?
Click to expand...
Click to collapse
with heimdall-suite i extract the pit file from the phone successful but i unable to write, adb slideload is recognized with adb,any command to send via adb slideload or via download mode to mount the partitions? when i send a zip file via adb slideload i get unable to mount cache,with sd card boot recovery can i fix this?
Odin is failing when trying to flash sboot.bin because you are using the wrong ROM, the ROM has bootloader that is older than the bootloader in the phone, you need to use the original Samsung USB cable, or a different USB 2.0 port.
audit13 said:
Odin is failing when trying to flash sboot.bin because you are using the wrong ROM, the ROM has bootloader that is older than the bootloader in the phone, you need to use the original Samsung USB cable, or a different USB 2.0 port.
Click to expand...
Click to collapse
the stock rom i try to flash is the latest and same with the rom from the broken phone
Sounds like the memory chip is defective.
audit13 said:
Sounds like the memory chip is defective.
Click to expand...
Click to collapse
if i try this guide from the rar file can i fix it? i only need a bootloader dump file from a working n7100 with 4.4.2 firmware and then i write it on a sd card , this will repair the nand write fail? maybe the bootloader is corupt and is working after re write with sdcard mode.
If the nand is defective, no software is going to fix it.
If the bootloader was corrupt, Odin would flash over the existing bootloader could fix it.
Try this: flash twrp to the phone using Odin and then use TWRP to flash a CM ROM to see if the phone will boot with CM.
nand write start fail with twrp and Odin
My conclusion is that the memory is defective but you won't know for sure until you have a cell shop try and force flash the firmware.
geoweb29 said:
Hi, i have a problem with my phone,latest stock rom,no root,i found it stuck on boot screen after i use a non original cable with original charger, is SDS or i can fix it? when i try to use odin with stock rom i get nand write fail everytime ,i see the phone conected in device manager(photo) , in recovery i see red errors and when i enter in download mode odin see the phone but is unable to write, can you help me to fix this or any solution to fix it with usb or sd card only because i dont have profesional tools (box)? thanks
Click to expand...
Click to collapse
if your hard is 16 gig , i am sorry to tell you it is 99% EMMC
I think PC will not solve this problem , you need to flash your phone via box if it fail you need to change EMMC
at last I wish I am wrong
Regards
xcorona said:
if your hard is 16 gig , i am sorry to tell you it is 99% EMMC
I think PC will not solve this problem , you need to flash your phone via box if it fail you need to change EMMC
at last I wish I am wrong
Regards
Click to expand...
Click to collapse
4 months ago before SDS i used emmc brickbug check to scan the phone and the status was Yes,insane chip (photo)
i manage to make a usb jig(photo) and with this i see Factory mode in download mode but same problem with nand write fail, i have to search a new motherboard
may I advise you to look at tutorials in youtube about replacing the mother board it is (solderless job) but it is not easy
you can check them to see the processing of the work , then you can judge by your self if you have the time and the ability to go forward and pick an used phone with smashed screen (choose 32 giga hard)
then you can replace the motherboard
at last I hope all your matters will be fine
Best Regards
I see at this Q&A many people have same problem, My phone just like your now, hope you can fix it, it'll help me alot
I'm still trying to take my phone's storage back, it's 0GB right now .
why does so many note 2 SDS's at this point? mine does it too, it first occured a few weeks back, it was a small issue where some folders wasn't deltable in data, but it was fine i could still use the phone and it functioned normally, untill 4 days ago, i exprienced serious issues, the so corrupted folders in data caused alot of problems, it made the phone randomly freeze, force stops apps, then this day it got more serious than ever, nothing mounts on TWRP, no not even the SD card (SD Card still works tho on my PC) odin nand write failed, i checked a few months ago with the app, it was yes a Insane chip, so i guess its time to say goodbye to my note 2 and move on, it was a great 4 years with this phone, and i am sad to see it go....
My sister's S4 mini suddenly died, I cannot open the smartphone nor go on Recovery or download mode.
I used a debrick.img found here on xda put on a externaSD and manage to enter the download mode, then i try to flash a stock rom but it got stuck during the process (i leave odin running for hours without any success).
After that, when i retry the process this is what i got on screen:
Code:
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS. .
COPY FROM T-FLASH. .
WRITE 139008 sectors. .
FLASH WRITE FAILURE
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-I9195
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
BOOTLOADER AP SWREV: 2
CSB-CONFIG-SLB: 0x30
WRITE PROTECTION: ENABLE
I try to flash different .pit file found here on xda for the i9195 but if i try to flash (using Odin 3.13 or even odin 1.85) it says
Re-Partition operation failed or There is no PIT partition.
Any other idea i can try?
Maybe another .pit file for i9195 and a firmware that work with it?
Thanks to everyone
Goku_ssj3 said:
My sister's S4 mini suddenly died, I cannot open the smartphone nor go on Recovery or download mode.
I used a debrick.img found here on xda put on a externaSD and manage to enter the download mode, then i try to flash a stock rom but it got stuck during the process (i leave odin running for hours without any success).
After that, when i retry the process this is what i got on screen:
I try to flash different .pit file found here on xda for the i9195 but if i try to flash (using Odin 3.13 or even odin 1.85) it says
Re-Partition operation failed or There is no PIT partition.
Any other idea i can try?
Maybe another .pit file for i9195 and a firmware that work with it?
Thanks to everyone
Click to expand...
Click to collapse
I think her EMMc chip is probably dead, so needs replacing (new motherboard)