Related
*** OTADelusion is no longer available ***
Use fastboot flash update instead - guide.
Code:
[B]*** Disclaimer[/B]
If you wish to follow the instructions in this post, you agree that -
* Your warranty is void.
* I do not offer any guarantees that this will work or that it won't cause any
bad side effects.
* You alone are responsible for any damages or other issues that may arise
directly or indirectly because of this.
This has undergone basic testing on multiple devices running supported ROMs, but
again, there are no guarantees. Use it at your own risk.
In particular, OTA updates have not been tested on rooted devices.
Introduction
What Is This?
The FonePad 7 has a very secure stock ROM that is not vulnerable to any known exploit. But fortunately for us, Asus introduced their own vulnerability in it, which we can take advantage of. This is a guide that will help you root your FonePad 7 using that vulnerability.
How Does It Work?
Overplayed, Cool-Sounding Version
OTADelusion exploits multiple critical security vulnerabilities in the over-the-air update mechanism employed by the FonePad 7 -
The update delta packages are delivered to the device through an unencrypted medium.
The device can be configured to use any DNS server and it does not verify DNS query responses.
The package verification process relies on an asymmetric key-pair whose private key is compromised.
A man-in-the-middle attack is performed while downloading an OTA update by forcing the device to use a rogue DNS server which directs the device to connect to a rogue web server. This web server serves malicious update packages with forged cryptographic signatures. These update packages are designed to install a permanent backdoor in the device, allowing the user full access to it.
Down-To-Earth Version
Someone at Asus forgot the 'S' in 'HTTPS'
Someone at Asus forgot to replace the test Android signing key with their own
1 + 2 = Pwnage
What Do I Need To Use It?
A FonePad 7 running a supported version of the stock ROM (check the section below for a list of supported versions)
A working Wi-Fi connection (this will NOT work on 2G or 3G)
Supported ROM Versions
Go to Settings -> About tablet and check the "Build number" field
3.2.2 - NOT supported. Upgrade to 3.2.4
3.2.4 - Supported (WW and TW)
5.1.6 - NOT supported. I need volunteers to help me test.
5.2.2 - Supported (WW)
5.2.5 - NOT supported. May be added in the future. Check this thread for updates.
Click to expand...
Click to collapse
Installation Instructions
Follow these steps -
Read the disclaimer at the top of this post.
Make sure you're connected to a WiFi connection, NOT 2G/3G.
Go to Settings -> About tablet -> System Update and check for updates.
When you see the update prompt, select "NO"
Go to Settings -> Apps -> scroll to the "All" tab -> CMClient
Press the "Force Stop" button
Press the "Clear Data" button
Repeat the above steps with DMClient in the Apps list
Go to Settings -> WiFi -> long press on your network -> Modify Network and follow these steps -
Set IP Settings to "Static"
Note down the values of DNS 1 and DNS 2 somewhere.
Set DNS 1 to <snip>
Make DNS 2 blank
At this point, your Internet connection will stop functioning correctly. This is intended and temporary.
Repeat step 3. If it shows an error, reboot and repeat this step.
Make sure you get an update called "OTADelusion".
Download and install the update.
After reboot, go back to WiFi settings and restore the previous values of DNS 1 and DNS 2.
You now have root. Enjoy! But also be careful - there is currently no way to de-brick this device if you screw up.
Click to expand...
Click to collapse
Changelog
v0.2 - February 27, 2014
Added v5.2.2 WW.
Works on v3.2.4 WW, v3.2.4 TW, v5.2.2 WW.
v0.1 - January 24, 2014
Initial version.
Works on v3.2.4 WW and TW.
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* XDA members (in alphabetical order) d0p3d, eagleofdeath13, fabiocr, Fuad.kh,
Lord Childe and MEHRDAD595, for testing.
* Chainfire, for SuperSU.
* Asus, for leaving one last security hole.
Status
Running an update server costs actual money, so I won't be able to keep it running indefinitely. I expect to be able to keep it running through 2014 at least, but there are no guarantees. It can go offline at any time. The address mentioned may also change at times. This post will be updated if that happens. Server taken down because there is now an offline method.
Current Server Status: Offline
Thanks for the hard work man, hope you are able to solve the other versions as well. :good:
Hey, just a thinking. If Asus can update the "update" app, maybe you can too, and then send any updates (and modification) you want, no?
If it's possible, we have a big posibility in here i think
eagleofdeath13 said:
Hey, just a thinking. If Asus can update the "update" app, maybe you can too, and then send any updates (and modification) you want, no?
If it's possible, we have a big posibility in here i think
Click to expand...
Click to collapse
It's certainly possible, but a much cleaner solution would be to get a working recovery. The bootloader is locked, but it looks like it's not encrypted. There may be a way to make it accept a custom recovery.
But we need someone who's willing to take the risk of possible bricking and test the recovery on their device.
I think that it could be a good idea to open one of our devices, to see if there's some JTAG (or thing like that) to have a fully trustable backup option.
after rooting my ME372CG, can it download upgrading package automatically and upgrade to newer version firmware?
thanks.
qianw said:
after rooting my ME372CG, can it download upgrading package automatically and upgrade to newer version firmware?
Click to expand...
Click to collapse
It hasn't been tested yet. I would suggest you don't, at least until somebody else confirms that it works.
I do suspect that there is some code in the OTA package that triggers a ROM verification in the bootloader, but I'm not sure.
Either way, if somebody's willing to take the risk, let me know. I can make a modified update package that should reduce the risk of bricking.
Hi, Dr. Psycho
Thank you for your quick reply.
I am using 5.2.2 firmware, so need to waiting for next rooting opportunity..
BTW, after rooting, if can't download upgrading package automatically, is there any way to flash the package manually (if i can download it from somewhere)?
Dr. Psycho said:
It hasn't been tested yet. I would suggest you don't, at least until somebody else confirms that it works.
I do suspect that there is some code in the OTA package that triggers a ROM verification in the bootloader, but I'm not sure.
Either way, if somebody's willing to take the risk, let me know. I can make a modified update package that should reduce the risk of bricking.
Click to expand...
Click to collapse
qianw said:
BTW, after rooting, if can't download upgrading package automatically, is there any way to flash the package manually (if i can download it from somewhere)?
Click to expand...
Click to collapse
The only way is to do what I'm doing with this guide. You'll need to run a fake DNS server and a web server and fool the tablet into downloading your package. If you're on the latest version of the stock ROM, you'll need to either patch the DMClient app or install a self-signed CA certificate (not through Settings, you'll need to copy it to /system).
This thread has a lot of information for those interested, especially in the last ten or so pages: http://forum.xda-developers.com/showthread.php?t=2514714
EDIT: Just realized you might talking about official updates. Those will be downloadable and installable, but we don't know if it'll work. It might brick your device.
What I wrote above was for custom mods.
This will all become much easier if we get a working recovery.
Yes, I mean official ROM upgrading after rooting. Sorry for the confusing.
I am waiting for Android 4.4, I don't know when Asus can release it for ME372CG. I don't want rooting affect ROM upgrading in the future.
Your answer is quite clear, thanks!
Dr. Psycho said:
The only way is to do what I'm doing with this guide. You'll need to run a fake DNS server and a web server and fool the tablet into downloading your package. If you're on the latest version of the stock ROM, you'll need to either patch the DMClient app or install a self-signed CA certificate (not through Settings, you'll need to copy it to /system).
This thread has a lot of information for those interested, especially in the last ten or so pages: http://forum.xda-developers.com/showthread.php?t=2514714
EDIT: Just realized you might talking about official updates. Those will be downloadable and installable, but we don't know if it'll work. It might brick your device.
What I wrote above was for custom mods.
This will all become much easier if we get a working recovery.
Click to expand...
Click to collapse
Hello all!!!
Dr. Psycho, I confirm your solution is working!!!!.... Thank you very much... I bought the device today, based on your solution to root the phone... Thank you again...
Theodore
Thanks! working great here
I noticed that some JP (as opposed to WW and TW) FonePad 7 users are trying to use my server to root. The JP version isn't supported yet (I didn't even know it existed). I can add it if someone with the JP version could help me get some values from their device. It'll only take a couple of minutes. Send me a private message if you're interested.
To check if you're using the JP version, go to Settings -> About tablet and check the "Build number" field. It should say "JP" somewhere in the middle.
Botto00 rooted the original Fonepad and made it Flash capable. There are several Flash browsers (Photon, Flashfox, Puffin), but because the Flash stream is redirected it's not a good viewing experience. I was wondering If you had any plans to incorporate Flash in your rooting method? I've already taken advantage of your root and maybe it's too late anyhow.
Lord Childe said:
I was wondering If you had any plans to incorporate Flash in your rooting method?
Click to expand...
Click to collapse
Have you tried this?: http://forum.xda-developers.com/showthread.php?t=1931699
Lord Childe said:
I've already taken advantage of your root and maybe it's too late anyhow.
Click to expand...
Click to collapse
If I did come up with patches or ROMs, already having root would't be a problem at all. It shouldn't be too hard to make an app that instructs the bootloader to flash a package like DMClient does. Even if it turns out to be difficult, with root access, I can easily hijack the update-checking mechanism with a self-signed CA certificate and a web server, similar to how we're achieving root right now.
I did in fact have plans to make a recovery or at least an app that would act like a minimalistic recovery and let you flash recovery packages. The problem is, I'd need either a test device or a daring volunteer. And time too - I don't have much of that right now.
Dr. Psycho said:
Have you tried this?: http://forum.xda-developers.com/showthread.php?t=1931699
If I did come up with patches or ROMs, already having root would't be a problem at all. It shouldn't be too hard to make an app that instructs the bootloader to flash a package like DMClient does. Even if it turns out to be difficult, with root access, I can easily hijack the update-checking mechanism with a self-signed CA certificate and a web server, similar to how we're achieving root right now.
I did in fact have plans to make a recovery or at least an app that would act like a minimalistic recovery and let you flash recovery packages. The problem is, I'd need either a test device or a daring volunteer. And time too - I don't have much of that right now.
Click to expand...
Click to collapse
I quite understand time limitations working on stuff like this - I think everyone appreciates the time and effort you've spent on rooting Fonepad 7.
I followed the procedure in the link. Unfortunately, it doesn't work... maybe that fix is for machines that still support Flash.
Would I dare to volunteer? Hmm... now that I've got root I don't think I would risk it.
Lord Childe said:
I followed the procedure in the link. Unfortunately, it doesn't work... maybe that fix is for machines that still support Flash.
Click to expand...
Click to collapse
I'll give it a try when I get my tablet back and see if I can get it to work.
Lord Childe said:
Would I dare to volunteer? Hmm... now that I've got root I don't think I would risk it.
Click to expand...
Click to collapse
I don't blame you. I wouldn't suggest testing unless you really don't care if you brick the tablet.
thumbs up for 5.2.2 :highfive:
USB OTG
Hi, i know this is not the right tread to ask but since there is not forum about our tablet i'll ask here. I have a fonemap 7 ME372GC the 4 GB version (witch by the way doesn't appear on Asus page) and i'm not able to use usb OTG. Is this not possible on our tablets or does mine have something wrong? I have 5.22 rom version andoid 4.3. I use an OTG cable witch is working on my HTC One
Thank you for your help
Let's root it again
Hi Dr. Psycho,
I just got a Asus fonepad 7 model: k00E (ME372CG) and I will put some more data about this device:
- Firmware version: 54.2F
- Android version: 4.2.2
- Baseband version: 1338G_1.12.0_0913
- Kernel version : 3.4.34-00006-gc3b491f
[email protected] #1
Fri Sep 13 21:24:31 CST 2013
- Build number: JDQ39.WW_epad-V3.2.1-20120913
000053_201307241030
It seems as this is the older version of the build then 3.2.4 but it is well WW.
Should I upgrade to version 3.2.4 (and can you explain me how to do this but still to avoid ASUS upgrading to even newest version) or may I try to update this "OTADelusion" update directly with this "old" build number following the instructions ?
And is there any risk of bricking my device with rooting following this method as you stated that there is no way to de-brick Asus fonepad 7 yet ?
Or is there any other (older and safer) way to root this older build version except this "OTADelusion" ?
Thanks in advance !
Cheers !
Q&A for [MOD] OppoCamera + SuperMacro
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [MOD] OppoCamera + SuperMacro. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
This camera is only for ColorOs, or I can flash it on my Cm12?
KATANA_TEAM said:
This camera is only for ColorOs, or I can flash it on my Cm12?
Click to expand...
Click to collapse
Its only for ColourOS.
Work with CM12 or not?
Delete this mesage
---------- Post added at 01:31 AM ---------- Previous post was at 01:26 AM ----------
Hi! Does it works with Cyanogenmod 12 (Lollipop) or not?
thamper said:
Delete this mesage
---------- Post added at 01:31 AM ---------- Previous post was at 01:26 AM ----------
Hi! Does it works with Cyanogenmod 12 (Lollipop) or not?
Click to expand...
Click to collapse
Only for ColourOS. Not sure which version of COS will it work on.
camera
Hi all!
I have some question in this new camera mod.
If you choose the RAW mode, can you set the ISO value? In 4.3 it was worked, but in 4.4 it wasn't one (there is not this opportunity)
Other hand, I skilled a bug in all of oppocamera.apk. The problem is next: You select the RAW mode, and set ISO 100 in night. If the shot longer than 3 sec, the camera will froze, and you have to reboot the phone in order to you can use again (the camera).
Sometimes it works, and you can take beautiful shots in night or low light condition.
Such as:
oppoforums.com/attachments/img20141228202030-jpg.28662/
oppoforums.com/attachments/img20141227205402eredeti-jpg.28663/
oppoforums.com/attachments/img20141228200154-copy2-jpg.28664/
I took it.
Can I install the 4.3 camera-apk to the 4.4 from recovery? It would be possible?
camera issue
I hope I will get some help. Thanks
ask
new chinese COS out with based android 4.4.4 and new plugin Pure Image (After Focus work now) whether you want update this camera?
balazs901022 said:
Hi all!
I have some question in this new camera mod.
If you choose the RAW mode, can you set the ISO value? In 4.3 it was worked, but in 4.4 it wasn't one (there is not this opportunity)
Other hand, I skilled a bug in all of oppocamera.apk. The problem is next: You select the RAW mode, and set ISO 100 in night. If the shot longer than 3 sec, the camera will froze, and you have to reboot the phone in order to you can use again (the camera).
Sometimes it works, and you can take beautiful shots in night or low light condition.
Such as:
oppoforums.com/attachments/img20141228202030-jpg.28662/
oppoforums.com/attachments/img20141227205402eredeti-jpg.28663/
oppoforums.com/attachments/img20141228200154-copy2-jpg.28664/
I took it.
Can I install the 4.3 camera-apk to the 4.4 from recovery? It would be possible?
Click to expand...
Click to collapse
Yes, you can. Simply get the 4.3 apk and put it into the zip with my mod - replace the OppoCamera.apk.
Most of the camera modes are designed to use their own settings. Normal mode is the only one to make use of the scene modes, ISO values, etc.
Asror said:
new chinese COS out with based android 4.4.4 and new plugin Pure Image (After Focus work now) whether you want update this camera?
Click to expand...
Click to collapse
I will, but note that AfterFocus will not work for you unless you are on the 4.4.4 ROM.
Besides, if you are on that ROM, you can use AfterFocus with any OppoCamera apk - you don't need the mod to be updated.
Will these work on another phone?
madcatz-es said:
Will these work on another phone?
Click to expand...
Click to collapse
No, it won't.. Unless you have an Oppo/OnePlus phone with ColorOS.
Hi there, firstly I want to thank you guys for the great job you've made so far. So grateful
I just asked @infinityplus who redirected me here. I would like to ask you some. I know there are a lot of features in this app, but I think it could be the perfect app if you could add some more :
-Infinity focus : It would be very perfect if you added it in focus settings as we can find it in cyanogenmod's app
-Metering Modes : Spot, center-weighted and matrix as we had, once again, in cyanogemod's
And then I was figuring, given we have an 8mm sensor, I read that we could shorten shutter speed up to the opposite of the sensor size (which raises it up to 1/8s) without getting fuzzy shots . Do you think it's possible to shorten it below 0.5s ?
Thanks for your job one more time and sorry for my English, I'm French and you may know how bad we are
question
is this a new version of the oppo camera 1.61 and do all the plugins work?
Can Oppo Camera be installed on CM12
Hey guys I am new to the forums
I own a oneplus one and I was wondering if I could install this OPPO CAMERA to my phone
I have stock CM12 rom
Anup Shamanur said:
Hey guys I am new to the forums
I own a oneplus one and I was wondering if I could install this OPPO CAMERA to my phone
I have stock CM12 rom
Click to expand...
Click to collapse
Then u should flash the Oppo Camera through TWRP.
Link: http://forum.xda-developers.com/oneplus-one/themes-apps/coloros-camera-port-t3034148
Saturation and contrast location?
Thanks for making this excellent mod.
Plese can you tell me where I can change contrast and saturation?
I am sure I have the latest version of the camera; 0.24.
I have ColorOS V2.0.8i.
Thank you.
Not working
I'm using rom 2.1.2 Int'l. I've just flashed the file with TWRP but nothing changed when I restarted the phone. What is my problem? Can anyone help me please
matx999 said:
Thanks for making this excellent mod.
Plese can you tell me where I can change contrast and saturation?
I am sure I have the latest version of the camera; 0.24.
I have ColorOS V2.0.8i.
Thank you.
Click to expand...
Click to collapse
You can control contrast and saturation in
0.30+ version.
Zenkithedemonprince said:
I'm using rom 2.1.2 Int'l. I've just flashed the file with TWRP but nothing changed when I restarted the phone. What is my problem? Can anyone help me please
Click to expand...
Click to collapse
Which zip and version have you flashed?
I flashed the newest version 3.0 And I'm using TWRP v2.8, can it be the problem here :-?
Zenkithedemonprince said:
I flashed the newest version 3.0 And I'm using TWRP v2.8, can it be the problem here :-?
Click to expand...
Click to collapse
I meant if you flashed the one from the first post or any zip from the last posts in the original thread....
There would be a hackish way how to force the installation, but only if you're rooted:
1. Use TitanumBackup to backup OppoCamera
2. Then uninstall OppoCamera
3. Go to TWRP recovery and flash the mod.
But have in mind, that int'l version of ColorOS differs from the chinese one - it might not work.
Hello guys, I'm going to share some CM builds I've found online and I'd like you to try them and discuss them. Thanks to collapseromer.
Builds are usually compatible both to US and Chinese devices: please say which version you're using when you post/report bugs since we'd like to confirm that.
Most recent I've found (old versions hidden):
BetaHydri (12/07/2016):
http://forum.xda-developers.com/leeco-le1-pro/development/cm12-1-rom-betahydri-letv-1-pro-t3416651
Thanks to our fellow @BetaHydri we have the best of both worlds: working location service (even for mobile and wifi, Smart Lock via location should work now!) and working videos. Nice job!
Collapseromer's 20160628 build:
http://rom.7to.cn/romdetail/1012717
https://mega.nz/#!H91Q0RCB Passcode: !R1XXlc3yt8gUORagS7B-4PVf9ZCFP7uueVTIY8AMY08
OK, things are getting serious: we've got Play Store and Google services working fine (location via mobile data and wifi not working), all kind of streaming videos play fine, framerate for GPU intensive games is unbelievable compared to LeTV's 12S stock ROM based Custom ROMs; no major bugs to note except Parrot's Free Flight 3 app not working.
Dolby Atmos/AudioFX can be fixed using http://forum.xda-developers.com/showpost.php?p=67579077&postcount=109
Collapseromer's 20160528 build:
http://rom.7to.cn/romdetail/1012091 --> Chinese thread
http://pan.baidu.com/s/1boNb5Ll --> download from China
https://mega.nz/#!QgoihJCQ!RpD2O1knJ5L6uAOGI7I6elv6spUNrPXD7whpqb6y2kE --> mirror
Google Play Store started FCing after like an hour since I installed. I've tried a few things to get it back (uninstall via Root Explorer and reinstall, clear cache and data, flash GApps again) but so far no luck; funny enough, it's auto-updating installed apps and installing apps when I do that via browser just fine. :/
EDIT: Now it works... I guess it's because of the modified build.prop I applied, which I'm attaching here..
Actually I kept getting Play Store working on and off and I couldn't understand what triggers that so I reverted to the ROM below.
Collapseromer's 20160512 build:
https://app.box.com/s/ua2ekx0g54iltp2nj9b8uo2fykciylwg Uploader got out of bandwith, use link below
https://mega.nz/#!J8wTRS7Q!HFnr-waFdMvbJM-69doDuvmC2CI3RPytI8ODXNaqMio
- This ROM gets everything working except Periscope and Facebook videos.
As an attachment you can find a flashable zip to restore volume switch function on any CM build! Thanks http://bbs.le.com/thread-1675368-1.html
Please note I always disable all the Chinese apps (for example using https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup&hl=i) and install Stock/Aroma Open Gapps (http://opengapps.org/).
This is a guide to trim the ROM zip from variuos apk's, use wisely: http://bbs.elephone.hk/thread-2939-1-1.html
And this is an additional trim guide which was true for collapse-cm-12.1-20160512-UNOFFICIAL ROM, not confirmed on newer versions
Code:
[B]system\app folder[/B]
360mse-->chinese app
660007-->chinese app?
baiduinput-->Chinese keyboard, watch out as there are no other keyboards!
clear-->Perfectly Clear? (photo)
CollapseSettings-->??
cpuspy
Development-->??
Flash-->Adobe Flash?
sogousearch-->chinese sogou
wandoujia-->chinese baidu
[B]system\priv-app[/B]
audiofx-->not working
trebuchet-->only if you flash Gapps and use Google Launcher
Missing SIM possible solution (thanks 0rk0 from http://www.letv.re/topic/1020-letv-x800-lost-imei/?do=findComment&comment=9608)
Code:
1. With the card inserted and unacknowledged make a call by typing: * # * # 4636 # * # *
2. Appear a menu with several options: informaticion phone, battery information, usage statistics and wifi information. That we are interested in "phone information" we click on it.
3. We get a lot of things and options. We seek "Set preferred network type" and we click on the tab that appears below us which allows us to select different types of networks.
When you first enter this menu appeared selected the option "TD-SCDMA, LTE, CDMA, EVDO GSM / WCDMA," possibly this was the problem, it was the wrong choice. So it was.
4. Change the option to "LTE / GSM / CDMA auto (PRL)" and restart your phone (you simply have to select it and get out the normal phone menu
This is the official device support request CM thread, chime in! https://forum.cyanogenmod.org/topic/120767-letv-x500-x600-x800/
And head over here to review the ROM, I think that may stimulate collapseromer to build more, maybe even CM13! http://rom.7to.cn/romdetail/1012717
What's your mileage guys? Could you get some CM13 somewhere, maybe? Please share your files and experience, LeTV ROMs are just clueless and I really think CM is the only way out: how could you develop such a useless lockscreen and notification shade, LeTV?
Hmm... Great stuff. I also not very impressed by EUI... What about Sim card slots, mobile Internet and camera? Do all these things work on CM too? How about battery life? Is it improved or same or less?
Sent from my Le 1 Pro using Tapatalk
I'm using slot 2 only and data/calls/messages work fine; both cameras work, with 4k videos too; battery is more or less the same, I can go morning to evening just like Cuoco's. I really insist you should try, unless letv starts developing good things (but it seems like Android 6 ROM doesn't change much) I'll never look back; moreover, someone may port cm13 sooner or later.
Inviato dal mio X800+ utilizzando Tapatalk
How's the camera quality, compared to EUI?
Thanks for this share OP =D
Not at all, dude, I just want to spark some conversation and maybe development for this DOA device...
Camera is fine, you even get 4k video recording from main camera and 1080p from the front facing one. Even official EUI ROMs are not that good, with camera: videos always fail to autofocus and you have to keep pressing on screen to refocus, while pictures live preview is slow and generally not so good with low lighting.
Please H3G, deliver the HTC 10 and I'll get that in a heartbeat so I can stop going slightly mad with this device!
teorouge said:
Hello guys, I'm going to share some CM builds I've found online and I'd like you to try them and discuss them. Thanks to collapseromer.
Please note I always disable all the Chinese apps and install Open Gapps
Most recent I've found:
http://rom.7to.cn/romdetail/1012091 --> Chinese thread
http://pan.baidu.com/s/1boNb5Ll --> download from China
https://mega.nz/#!QgoihJCQ!RpD2O1knJ5L6uAOGI7I6elv6spUNrPXD7whpqb6y2kE --> mirror
This is a great ROMtoo bad Google Play Store started FCing after like an hour since I installed. I've tried a few things to get it back (uninstall via Root Explorer and reinstall, clear cache and data, flash GApps again) but so far no luck; funny enough, it's auto-updating installed apps and installing apps when I do that via browser just fine. :/.
EDIT: Now it works... I guess it's because of the modified build.prop I applied, which I'm attaching here.
https://app.box.com/shared/static/ua2ekx0g54iltp2nj9b8uo2fykciylwg.zip
This ROM gets everything working except Periscope videos.
What's your mileage guys? Could you get some CM13 somewhere, maybe? Please share your files and experience, LeTV ROMs are just clueless and I really think CM is the only way out: how could you develop such a useless lockscreen and notification shade, LeTV?
EDIT: this is the official device support request CM thread, chime in! https://forum.cyanogenmod.org/topic/120767-letv-x500-x600-x800/
And this is a hardware-similar device which got CM, maybe it helps someone. http://download.cyanogenmod.org/?type=snapshot&device=sambar
Click to expand...
Click to collapse
Hi,
do I understand correctly that this "collapse-cm-12.1-20160531-UNOFFICIAL-X800" version works on our LeTV 1 Pro X800 US/CE model?
BetaHydri said:
Hi,
do I understand correctly that this "collapse-cm-12.1-20160531-UNOFFICIAL-X800" version works on our LeTV 1 Pro X800 US/CE model?
Click to expand...
Click to collapse
Correct, any CM you'll find in this thread works both for CN and US versions, I'm using an US device myself.
teorouge said:
Correct, any CM you'll find in this thread works both for CN and US versions, I'm using an US device myself.
Click to expand...
Click to collapse
Ok thanks !
Then I will try it today, as I have some problems with my actual CUOCO 11S V4.3 which could not be OTA updated anymore for whatever reason.
Did't you installed OPENGAPPS arm64 version right after the ROM flash ?
Right, opengapps build, 64 bit, Android 5.1, flashed right after ROM (put two zips in queue, in case you're wondering). Let me know which build you're going to flash and how you like it.
teorouge said:
Right, opengapps build, 64 bit, Android 5.1, flashed right after ROM (put two zips in queue, in case you're wondering). Let me know which build you're going to flash and how you like it.
Click to expand...
Click to collapse
Get on this site and add comments guys, this way we may get collapseromer's builds more often and maybe even its CM13...
http://rom.7to.cn/romdetail/1012091
teorouge said:
Get on this site and add comments guys, this way we may get collapseromer's builds more often and maybe even its CM13...
http://rom.7to.cn/romdetail/1012091
Click to expand...
Click to collapse
I installed it ! But on boot I choosed german as language maybe not a good idea. Will try again with english at first boot-up.
I noticed following:
- I installed OpenGAPPS Stock Version for 5.1 / arm64
- Google Play Store is crashing
- AudioFX is crashing
- four to six useless chinese apps included into the ROM
- One settings extension is completely in chinese
Anyway if I'm able to remove the for me useless stuff and fix the crashing of the play sotre, then I will keep this ROM.
Which ROM build did you flash? I reverted to https://app.box.com/s/ua2ekx0g54iltp2nj9b8uo2fykciylwg for now, just because of Play Store issues (even though it actually worked since I could install apps via browser and apps were auto-updating I could open it only sporadically, most of the time it force closed).
- AudioFX crashes here too, I actually never tried that since all my audio needs are speaker and bluetooth;
- You can easily freeze/uninstall those Chinese apps: enable CM root access in standard developer settings, install Titanium Backup or similar from Play Store (or via apk from apkmirror.com) and get rid of them;
- That settings item in Chinese language is actually just a container for all those Chinese apps you want to kill, so don't bother. It will force close if you click on it, once you freeze/delete those apps.
- I always choose Italian as system language and everything is in Italian: except for those Chinese apps, of course, but they never survive for a long time.
teorouge said:
Which ROM build did you flash? I reverted to https://app.box.com/s/ua2ekx0g54iltp2nj9b8uo2fykciylwg for now, just because of Play Store issues (even though it actually worked since I could install apps via browser and apps were auto-updating I could open it only sporadically, most of the time it force closed).
- AudioFX crashes here too, I actually never tried that since all my audio needs are speaker and bluetooth;
- You can easily freeze/uninstall those Chinese apps: enable CM root access in standard developer settings, install Titanium Backup or similar from Play Store (or via apk from apkmirror.com) and get rid of them;
- That settings item in Chinese language is actually just a container for all those Chinese apps you want to kill, so don't bother. It will force close if you click on it, once you freeze/delete those apps.
- I always choose Italian as system language and everything is in Italian: except for those Chinese apps, of course, but they never survive for a long time.
Click to expand...
Click to collapse
I flashed this one that you posted at the beginning:
https://mega.nz/#!QgoihJCQ!RpD2O1knJ5L6uAOGI7I6elv6spUNrPXD7whpqb6y2kE
Should I try the one that you posted in the BOX account ? Isn't it the same ?
Nope, slightly older: try that.
teorouge said:
Nope, slightly older: try that.
Click to expand...
Click to collapse
can't download the one in the box account. The download don't start...
You're right, the uploader went out of bandwidth: I'm uploading to Mega myself, it should be ready in less than an hour. Of course I'll change the links too.
teorouge said:
Nope, slightly older: try that.
Click to expand...
Click to collapse
Is this one is from 07.06.2016 the same that you put on mega ?
http://rom.7to.cn/romdetail/1012091 --> The problem how to download it from there without the chinese downloader ?
[Android 5.1] [6.5.12] [music 1Pro-CM-12.1- rapid and smooth]
OF: collapseromer Android version: 5.1.x
UI Type: CyanogenMod a ROM Size: 425.00MB
Applicable models: music as the X800 + (Le 1 pro) Published: 2016-06-07
---------- Post added at 02:38 PM ---------- Previous post was at 02:29 PM ----------
teorouge said:
You're right, the uploader went out of bandwidth: I'm uploading to Mega myself, it should be ready in less than an hour. Of course I'll change the links too.
Click to expand...
Click to collapse
I noticed that I had already downloaded it during last week.
But see my last reply:
So this one is from 07.06.2016, is this the one that you put on mega ?
http://rom.7to.cn/romdetail/1012091 --> The problem how to download it from there without the chinese downloader ?
[Android 5.1] [6.5.12] [music 1Pro-CM-12.1- rapid and smooth]
OF: collapseromer Android version: 5.1.x
UI Type: CyanogenMod a ROM Size: 425.00MB
Applicable models: music as the X800 + (Le 1 pro) Published: 2016-06-07
Original filename of the file I'm uploading to Mega is collapse-cm-12.1-20160512-UNOFFICIAL. If you have that one just flash. Build date is 2016-05-12 (12/05/2016 in Europe), you can see it from the filename.
teorouge said:
Original filename of the file I'm uploading to Mega is collapse-cm-12.1-20160512-UNOFFICIAL. If you have that one just flash. Build date is 2016-05-12 (12/05/2016 in Europe), you can see it from the filename.
Click to expand...
Click to collapse
Yes exactly. I flashed it already Play Store works on this build from 12.05.2016. Cool !
I already deactivated all the chinese APPS via APPS Settings --> All Apps. It's important that you have to download first a new keyboard like google keyboard. As the chinese/english one will be also unavailable when deactivating all chinese app/services from settings.
Yeah, so far that build worked fine, only occasional non-playing Periscope/Facebook videos. Even installed Xposed Framework with a few modules.
Oh, are you using Trebuchet or Google launcher?
TeleNougat V4.5 for Sprint
@tdunham managed to get the stock deodexed Nougat rom which is based on the Sprint QC5 7.0 Nougat Note 5. I have everything tweaked in this rom specifically for the s6+ Sprint users.
"Features:
- Pre-Rooted with Magisk
- Hotspot enabled
- Knox Removed
- ItsOn Removed
- Extra Toggles added
- MSL disabled in ##DATA menu"
- S8 Apps:
Calculator/Calendar/Camera/Clock/Contacts/DownloadUi/Email/Galaxyapps/Gallery/Launcher feat. Hello Bixby/Lockscreen/Phone/SamsungInterent/Messages/Music/MyFiles/Phone/Video/Voicerecorder
Known Issues
1. language settings inside of Language and Input fc. (the issue is in systemui if someone wants to play around with it, may not get fixed anytime soon since no one really changes it from english anyway.
2. Hello Bixby app (uncheck video to not get a fc)
3. Night Clock and AOD doesnt work (due to kerne)
ROM INFO
Since this is stock based, everything Sprint related works. (prl, profile update, wifi calling, voicemail)
Personally prefer you to be on QC5 everything first (check general section in you need help odin to Nougat stock.)
Fresh wiped phone is always preferred before installing roms.
Flashing tutorial if needed:
1. Grab a cold one. (Key step)
2. Boot into twrp and WIPE SYSTEM, dalvik cache, cache in TWRP before flashing
3. Flash rom
4. Reboot
*dont forget that Android 7.0 is API 24 which means XPOSED will not work, there isn't an unofficial or official build for it yet.*
Rom Links:
V2 TeleNougat_V2Final4/20
V3 TeleNougat_V3
V4 TeleNougatV4_4/27Build
V4.5 TeleNougat4.5
V4.5 changelog: since noone has been complaing about the test 4.5, here it is. Bixby is pretty much perfect (if fc, clear data/cache for the app) + a few sammy updates (NOTHING MAJOR FROM 4)
V4 changelog: updated ALL SAMSUNG APPS, added samsung members, samsung flow, reminder app, added media ui sounds for rom, Galaxy themes fixed, briefing tab in Bixby working, bootscreen, few edits in build prop.
V3 changelog: updated touchwiz, calendar, clock app, s8 ringtones & media, calculator, phone app, shealth root fix, etc from S8 port base.
V2 changelog: NewStuffAddons is now built in, debloated system, s8 lockscreen, more stock features in stock mms app, no fc for device maintenance (smart manager), 3mini battery/clock, etc.
V1 changelog: Stock Deodexed
Credits:
@SuperR. for the rom kitchen and his ongoing support
@topjohnwu For Magisk root"
@tdunham for deox rom
@Jacobh25 for S8 apps, etc
SlidderG3, MorganTaylor, and others for troubleshooting and help
For discussion and updates join https://telegram.me/n7ton920p
“I don’t always drink, but when I do, I prefer dark liq”
https://www.paypal.com/cgi-bin/websc...=QJDY6W6PGBEAJ
Reserved
RESERVED
Everything is working great. I dirty flashed, though, being on QC5 already is why I did. Saved time from setting everything back up again.
Yuwei01 said:
Everything is working great. I dirty flashed, though, being on QC5 already is why I did. Saved time from setting everything back up again.
Click to expand...
Click to collapse
Glad to hear, yea if you are already on nougat, i usually only wipe /system in twrp since im flashing another system that way all my settings still there and its a lil cleanier to me. But lemme know how battery life is after a day or 2.
your file only 137 kb
SM-G928P_QC5_Deodexed_v1.1.zip"]SM-G928P_QC5_Deodexed_v1.1.zip
your file only 137 kb， i can not download your file in china ,can you upload it to mega or google drive
@bihailantian655
They are both on mediafire. They are 1.65GB and 70mb for the addon
Others have it downloaded already (the links are good, i just rechecked them) , try refreshing? Or redownloading.
thank very much. testing
l have tried two different pc and two vpn. :crying:137kb :crying:
Just Curious?
Do you think there's a possibility of something like this being ported over to the standard galaxy s6 (SM-G920P). I just happened to stumble upon this while doing some google searches.
even i have flashed the 70m file still .can not use data and shealth
AlienMerc said:
Do you think there's a possibility of something like this being ported over to the standard galaxy s6 (SM-G920P). I just happened to stumble upon this while doing some google searches.
Click to expand...
Click to collapse
I doubt it, though you could try, ive never messed with s6 Devices 920P.
Question to OP or anyone who would like to give feedback: If I Backup my Stock-Rooted(SU) in TWRP, then decided to use this ROM, and then also Backup this Rom. Should there be any issues on going back and fourth between the 2? Thanks in advance to anyone willing to give me feedback on this!
SprintBama said:
Question to OP or anyone who would like to give feedback: If I Backup my Stock-Rooted(SU) in TWRP, then decided to use this ROM, and then also Backup this Rom. Should there be any issues on going back and fourth between the 2? Thanks in advance to anyone willing to give me feedback on this!
Click to expand...
Click to collapse
No I didn't have any issues when I'd swapped backups. :good:
Custom Rom QC5
Yuwei01 said:
Everything is working great. I dirty flashed, though, being on QC5 already is why I did. Saved time from setting everything back up again.
Click to expand...
Click to collapse
Do I have to be rooted to flash this ROM ? I am on Stock QC5 .
Thanks.
Mulzac said:
Do I have to be rooted to flash this ROM ? I am on Stock QC5 .
Thanks.
Click to expand...
Click to collapse
Yes, if you install twrp without rooting with the Magisk-v12.0 zip. Stock recovery will replace twrp recovery at least it did for me. If you try to install this Rom without root in twrp I believe your get a not rooted error. You could try it? And also that Rom is prerooted FYI.
Is there a way to add Avatar for sent messages? I tried frash install and still no luck
Great Rom, Thank you!
SM-G928P Custom NougatFirmware G928PVPU3DQC5
drewiskee said:
RESERVED
Click to expand...
Click to collapse
I flashed the ROM and everything is working great, but how do I get rid of Sprint Hands Free Activation in the installed GT Idoneapps.
When I click on Samsung DM Manager all I get is :" idoneapps is granted super user rights. No permissions to enter OMADM Hidden menu"
Thanks Again .......great rom
Mulzac said:
I flashed the ROM and everything is working great, but how do I get rid of Sprint Hands Free Activation in the installed GT Idoneapps.
When I click on Samsung DM Manager all I get is :" idoneapps is granted super user rights. No permissions to enter OMADM Hidden menu"
Thanks Again .......great rom
Click to expand...
Click to collapse
what are you trying to do exactly?
Maybe that will help me. I clicked it and it said the same for me
So far so good. Is there any way to disable the data usage stats on pull down? I have unlimited and don't need it. It will just bug me. Thanks a bunch
EDIT: I figured this one out myself. I am including the change in case anyone else wants the data stats removed from quick settings.
1) use ES File explorer or another root explorer.
2) copy others.Xml from "system/ csc"
3) change permissions (not sure if needed but just to be safe)
4) edit others.xml. Near bottom are the new entries for mod and I just changed <CscFeature_SystemUI_SupportDataUsageViewOnQuickPanel>FALSE</CscFeature_SystemUI_SupportDataUsageViewOnQuickPanel>. Was originally true.
5) copy over the existing file
6) reboot
7) profit.
Thanks for Rom. can't wait to get it just the way I want.
drewiskee said:
Glad to hear, yea if you are already on nougat, i usually only wipe /system in twrp since im flashing another system that way all my settings still there and its a lil cleanier to me. But lemme know how battery life is after a day or 2.
Click to expand...
Click to collapse
The Rom hasn't had a battery drain impact in anyway for me. Thanks again it's running buttery smooth.
[Custom Rom] Huawei Mate 8 - NXT-L29C432B582 - Custom System Update - ("V. 6")
I have merged my threads. Please look here:
https://forum.xda-developers.com/ma...mate-8-nxt-t3677961/post73901232#post73901232
ChinHon said:
[Custom Rom] Huawei Mate 8 - NXT-L29C432B582
- Custom System Update - ("V.6")
- EMUI 5.01 - Android 7 -
On TWRP backup basis.
This update replaces the [K-Rom-M8-V5].
Developed and tested on this device:
Huawei Mate 8 (NEXT)
Model number: Huawei NXT-L29
Build number: NXT-L29C432B582
- OTA updated.
- Without branding, with root and root access.
- TWRP recovery
Mods:
- Call Recorder
- KangVip Advanced settings
- Autostart administration in the phone manager (PM+)
- Viper 4 Android FX
- Obtaining OTA authorization
I couldn't test if this runs on Firmwares other regions.
I think the v6 is going on all regions on B582/592.
Quick guide for experienced users:
Please make a backup of your data with Huawei Backup and TWRP.
The Rom will be installed as if you wanted to restore a TWRP backup.
All your apps remain intact.
Conditions required:
- Firmware B582,
- TWRP recovery, (from download, or available from v5 )
- root is not necessary,
- OEM and FRP unlocked,
- USB Debugging on.
All required files are in the download folder.
You are familiar with the matter? Then let's go!
If available, uninstall these apps: SuperSu and Magisk.
A unroot is not necessary. Please do not download the downloads as "ZIP".
Installation:
1. Replace existing boot partition:
"2017-12-M8.B582.stock.kernel.boot"
copy in the TWRP backup directory to the ExtSd and restore.
2. Install update:
"2017-12-M8_B582_AdvS_Xposed_SystemUpdate"
also copy to the TWRP backup directory and restore."
3. Rooting:
- In TWRP mount Internal storage/ system,
- go to: Install, system/ k-rom/ set and install the SuperSU. zip.
- Reboot.
- After starting, take the BusyBox App from the download.
Then please use it to install its binaries.
- Install the PM+ app and bring the autostart administration to the phonemanager.
Iggnore the incompatibility warning.
Do not reboot between steps 1 to 3. Do not wipes before and after.
That's all. The installation is complete.
If Viper or Xposed have not been installed with it, this can be found in the
Advanced settings can be made up for.
Xposed is already active. In case the framework gets disabled,
in the Advanced settings. There's no way use other Xposed versions.
This also applies to SuperSU. They are not compatible with this system.
Both are optimized for this system.
Of course, you can also use Magisk to root later with the instructions
in the v5 thread. (loss of ota authorization)
Xposed does not run under magisk rooting together with the Advanced settings.
It must be used for a successful SafetyNet test, must be completely removed before rooting.
In the Kangvip Advanced settings do not use the Addblocker and "hide Activate NavBar".
Both works only on China Roms.
Hiding the NavBar can be done comfortably with the App "Tiles" from the playstore. (See v5)
In the K-Advanced Settings /tune cpu, some of the following are available.
Modifications of the computer performance possible. Those who need more power can do so.
Testing out the "Power save" options is useless. Did a lot of it.
The Huawei's own energy saving settings cannot be topped.
Good luck!
Thank you very much:
[KangVIP] (Advanced settings),
@Tecalote (SuperSU)
and Chainfire, Stephen (Stericson) + Jmz Software, Team Win RecoveryProject,
JRummy and Huawei Technologies Co., Ltd.
Hint:
Despite careful elaboration, I cannot guarantee that the execution of this manual will not cause any damage to the device or operating system and therefore I do not assume any liability for any damage or malfunction of the hardware and software! If you are still unsure, follow these steps: Follow the instructions only if you or your device is subject to any conditions (model number, Android version, etc.). Read the instructions carefully and completely, look up unknown terms. Check downloaded files for viruses. Make a backup of important settings and data. Do not follow the instructions if you do not know what you are doing.
These warnings must be logical. Please process my comments correctly.
Click to expand...
Click to collapse
you da man
Sent from my HUAWEI NXT-AL10 using Tapatalk
jbmc83 said:
you da man
Sent from my HUAWEI NXT-AL10 using Tapatalk
Click to expand...
Click to collapse
This rom is going really well. Especially Xposed. I haven't been able to get it that stable yet. I'm really glad I finally made it.
@jbmc83
I now have the link of the v2 you are looking for. Still interested?
ChinHon said:
@jbmc83
I now have the link of the v2 you are looking for. Still interested?
Click to expand...
Click to collapse
me
nikolas60 said:
me
Click to expand...
Click to collapse
Do you know what it's about? The link is for developers only.
ChinHon said:
@jbmc83
I now have the link of the v2 you are looking for. Still interested?
Click to expand...
Click to collapse
sure thing, lets have it that would be the HRT v2 right? would i be qualified for the link tho? im not a dev either
Sent from my HUAWEI NXT-AL10 using Tapatalk
Everyone who works on a rom is a developer!
Here the link friends.
https://pan.baidu.com/s/1bpJGYyb
It's not HRT. Should be better. Look closely at the zip, could have subdirectories.
ChinHon said:
Everyone who works on a rom is a developer!
Here the link friends.
https://pan.baidu.com/s/1bpJGYyb
It's not HRT. Should be better. Look closely at the zip, could have subdirectories.
Click to expand...
Click to collapse
ah yes, i remember that one! actually have it already, you had provided a link before still, thanks for your trouble!
apparently, there is a new chinese B593 out, although the full stock versions provided on firmware finder are not approved for installation, unfortunately... so they cant be flashed properly. still, nice to see development continuing
I'll continue, of course, because it's questionable whether we get oreo.
Has someone successfully installed my update on another region?
Please let us know.
ChinHon said:
I'll continue, of course, because it's questionable whether we get oreo.
Has someone successfully installed my update on another region?
Please let us know.
Click to expand...
Click to collapse
could get interesting next spring, maybe well have another shot at oreo then... still wondering what the heck @c|nder was up to with this thread here
https://forum.xda-developers.com/mate-8/orig-development/oreo-rom-1-0-mate-8-south-america-t3702767
jbmc83 said:
could get interesting next spring, maybe well have another shot at oreo then... still wondering what the heck @c|nder was up to with this thread here
https://forum.xda-developers.com/mate-8/orig-development/oreo-rom-1-0-mate-8-south-america-t3702767
Click to expand...
Click to collapse
How to make new roms when you can't get to the baidu downloads anymore?
ChinHon said:
How to make new roms when you can't get to the baidu downloads anymore?
Click to expand...
Click to collapse
question is rather: how to make new roms if there arent any new firmwares being developed officially?
Sent from my HUAWEI NXT-AL10 using Tapatalk
Yeah, that's an aspect too. Making a new rom after every update is somehow unproductive. Just because of the google patch? I only made my update because of the stable xposed. I only make new ones in the future if something fundamentally changes.
Any news about oreo guys?[emoji848]
.....
Wow this is great work, how about the data? Is it decrypted with this method?
(sorry for the noob question)
aaron13 said:
Wow this is great work, how about the data? Is it decrypted with this method?
(sorry for the noob question)
Click to expand...
Click to collapse
Thank you.
My rom is not encrypted. It also replaces only the boot and system partitions.
Since data remains unaffected, nothing changes. It remains as it was before installation.
ChinHon said:
Thank you.
My rom is not encrypted. It also replaces only the boot and system partitions.
Since data remains unaffected, nothing changes. It remains as it was before installation.
Click to expand...
Click to collapse
But it is rooted so titanium can be used?
aaron13 said:
But it is rooted so titanium can be used?
Click to expand...
Click to collapse
Yes!
Go with all my roms.