Hello guys, i came to a problem, i have installed the prestigio multipad wize 3407 4g in my car. I used FCC Car launcher as an explorer and tasker for automatically waking and sleeping the tablet, when he receives power from the car. Almost everything worked fine except sometimes the tablet alone just muted the media volume which i don´t have a clue why ? If somebody does , your welcome to help However, when the tablet run of battery i could not turn it on again. Just to be clear, to made the tablet turn automatically on when he will ran out of battery , i edited the file kpoc_charger with this:
#!system/bin/sh
/system/bin/reboot
It worked good just as I wanted because when i turned him off and connected to charger, he showed the battery icon for a second and booted up. However when i finally installed him in car and he ran out of battery when i was away from the car, he was not able to boot up again. All he did when he got electricity was that he showed battery icon and tried to boot up, but he didnt make it. I think it happens because he dont have any power in battery (in reserve) for the boot proces. I tried to let him charge from the wall charger through the night but it did not help. After some time when i tried to manually turn it on he will completely refuse (looks like he dont have any power in battery at all), and only will show battery icon for a microsecond. Can somebody please help me how to bring him to live again and what to do to overcome this? Thanks
Related
hi guys,
i just checked out my ARTE160 battery. when i checked out the output voltage, i found that its 3.95~4.2 v when full charged. i jus checked this out with a multi meter. the battery is designed for 3.7v only, so does this mean there is a prob???
thx guys
I'm not a pro, but I think this means that everything is alright with the battery. I would rather worry if the voltage was below 3,7 V - that would definitely mean a problem.
well i find wat u say is logical but still im having some small prob in my phone.....
it keeps working well and suddenly the phone service alone wont work and gets hanged (means no calls and sms) after couple of mins mobile just researches the network and joins.
the prob is when this thing happens and someone calls me the call is ringing but i dont get any ring or alert in my mobile.......
also sms is not delivered kater but is lost completely......
i jus looked out somewhere that these probs may be due to battery........
Battery issue reply...........
nataraj_latest said:
hi guys,
i just checked out my ARTE160 battery. when i checked out the output voltage, i found that its 3.95~4.2 v when full charged. i jus checked this out with a multi meter. the battery is designed for 3.7v only, so does this mean there is a prob???
thx guys
Click to expand...
Click to collapse
I had to get a new battery and performed a hard-reset on my phone and all was well after that. make sure you have a back-up on your numbers....
well savain
thanks for ur reply.....
did u have the same kind of prob like the over voltage???
savain01 said:
I had to get a new battery and performed a hard-reset on my phone and all was well after that. make sure you have a back-up on your numbers....
Click to expand...
Click to collapse
I've just chcecked the output voltage of my battery - when 45% charged - the voltage was 3.82 V.
in my opinion, your problem has nothing to do with the battery. I had same problem that you described - I switched to WM6 from WM5 - it did the trick.
now it hangs very seldom.
I guess that would help you (at least if you're using WM5).
oh but im using 6.1 at present
its TOM'S ROM.....
...
*for battery issue;
buy a new battery and
charge <----- device must be off!...
when green led light shows, its done..
this should sort your battery issue..
* for issue with - ''suddenly the phone service alone wont work and gets hanged..''
try a hard reset, if it still happens, open the device - open through the back of the device and simply give it a clean, ensure all connections are connecting, in other words, scratch the pins inside device if they need it.. assemble correctly and hope this helps..
-use cotton buds, the ones you use to clean your ears with..
-use a pin/needle to scratch connections..
*sounds like a hardware issue, not rom issue so cleaning inside the device is recommended..
*I've fixed my p3300 plenty of times now by just simply cleaning inside it.
- including the ''not charging'' and ''no sim'' issue people have experienced..
Not charging
HI Geeks, I have a problem with my blackstone battery. It is getting charged only up to 50 to 55 percent. I kept on charger for one ful night. But no use. I am using official ROM. Can you suggest any solution for that?
Help PLZ
I tired both the charger and the USB cable. Still the problem remains.
A new problem
Now i am facing a new problem. When i switch off the Touch HD, it will not start. When i press the power button, it shows "Smart Mobility" then it will go off. I tried once and pressed the power button again. It lasted some more time, reaching to the HTC logo screen.
Then I Connect the phone using the usb cable to the desktop and press the power button. WOW. it started without any problem. Can you help me to get around this problem?
Roy Varghese
royi386 said:
Now i am facing a new problem. When i switch off the Touch HD, it will not start. When i press the power button, it shows "Smart Mobility" then it will go off. I tried once and pressed the power button again. It lasted some more time, reaching to the HTC logo screen.
Then I Connect the phone using the usb cable to the desktop and press the power button. WOW. it started without any problem. Can you help me to get around this problem?
Roy Varghese
Click to expand...
Click to collapse
*for battery issue;
buy a new battery and
charge <----- device must be off!...
when green led light shows, its done..
this should sort your battery issue..
i have a weird kind of battery issue
i plug in my AC adapter
the orange light lights up, for about 5 seconds
then , it keeps flashes orange
i power up my phone for about 5 seconds, it dies
any charge method will keep flashing orange
is my phone battery dead?
Does anyone have my issue ???
I am charging and charging and the indication shows as charging plus the percentage is increasing like normal. However, when I restart the system it shows more than charge percent. Most cases it shows 100%. For instance, show 82 % but after restart device shows 92 or 100%. Please help me experts. Thank a lot in advance for taking your time to reply
I installed the ARHD 7.0.0 ROM on Monday everything was working fine, I also installed the SMooth Rosie MOD and still everything was fine. But today, I lost my phone signal and though oh well i'll leave it whilst I go to the gym, I came back and the bttery ws at 23% (Was at 91% when I left it).
I rebooted the phone and it would get to the lock screen (with no ring) then it would reboot and it constantly done that. I reset everything and formatted everything, I transfered the ARHD 7.0.0 back onto the phone but as I was trying to flash the image, from windows, the battery died, I can't seem to charge it.
All its doing at the moment is flashing the red LED. I tried resetting the LED with power presses in and Vol but it keeps coming back after a few seconds.
I really just need to know how to charge the phone, once its charged I will be able to sort it out. Oh and I can't even turn the phone on at the moment.
Thanks in advance.
Sounds like you didnt instal the boot.img
EDIT: put it in the wall charger for 10-15 minutes and dont touch it...
I put it in a wall charger and its stopped blinking. Cheers
Oh and I did install the boot image on Monday, i've been using the phone for two days, then it just lost the signal and then didn't work. Weird!
Thanks again!
Yeah....just pluggin usb charger and leave it for ~1h and U will see, it's charging.
Few days after buying HOX I was on a party with enabled wifi, async, gps ect. Lately this night my phone goes off and I wasn't able to turn it on. At home I plugged in charger but there was no charging led.
Yeah...thougt the new phone was bricked.
With plugged usb I just left it for ~1h and then...TADAA!...charging led!!!
Well tried charging it with the wall charger. At first the light when solid, I returned to it 2 hours later and the light was off. Tried to turn it of and its blinking again, I can't even turn it on Arghh!!
Hi,
I know some people already went through this and i'd like to hear from them how they solved it and what are your thoughts about this issue. (I'm not sure if i solved it yet...)
It was all ok yesterday night. Received calls, sent messages through Whatsapp, Facebook, read articles on Flipboard, and set up the clock alarm and left it on the screen (in that dark mode with blue numbers - my phone is set to never sleep when charging).
And no, the phone didn't drop/suffered a hard impact or anything liquid came near the phone.
Plugged my phone to charge on the wall, the charging bolt icon appeared on the battery icon and i went to sleep. (The battery was at 34%)
I woke up this morning, battery was 100% charged as expected, so i unplugged it. Just after that, the phone went off and i couldn't turn it on.
I plugged it back on the wall and the charging battery icon appeared. It was showing an empty battery charging all over again. I tried to power it on. Google screen showed up, followed by the loading X from JB, then turned off.
I unplugged again and left my phone quiet for a while and then i tried to turn it on again. Turned it on all the way until the lock screen, but the battery icon was empty (with a "!") and then the phone went off again.
I've tried to follow some workarounds i've found on Google but none of them worked for me.
-Hard reset, trying to remove battery, sim card
-Cleaning the golden contacts on the battery compartment/battery/sim card with dry soft cloth.
-Trying to plug it on pc without the battery (couldn't recognize the phone - weird, because i've connected it many times and it was ok with it's drivers properly installed - no beep after 5 seconds)
-Power it on after plugging it on the wall
What i've just tried and seem to work (i hope so)
-I took the battery and sim card off the phone for a while. Put it all back after some minutes and turned it on. After the JB loading screen appeared, i waited a while and then plugged the cable on phone/wall.
Looks like the phone is working now, all my settings, pictures, data, music still there and the battery is charging all over again, from 5% (!?!?!?) but i'm not sure if it's really charging. I don't know if the phone will turn itself off again if i unplug from the charger.... Anyone has any ideas?
Could it be any software issue? (I've installed "Battery Widget? Reborn" from Play some days ago. It's a really beautiful widget for battery info but i don't think it's the problem because i've charged the phone a few times since then and it was all working good)
And i don't mess around too much with the phone. Just rooted to change from yakjuvs to yakju and update from ICS 4.0.2 to ICS 4.0.4 and then to takju/JB 4.1.1.
(My GSM Nexus is running Jelly Bean 4.1.1 - JRO03C, XXLF1, all stock and rooted. And yes, standard battery that comes with it)
Thanks!
Hello, today I played on my Nexus and it freezes and switch off. I re-plug the battery it start but freezes and switch off on boot screen. Later on I go home, I plug it on charger and eveything was solved.. untill I remove the charger again the phone freezes and refuse to turn on. Is the problem from battery or something worse?
Also when I remove the charger, phone first work, then lost signall (no matter 4G or 3G or H+) and then again gain signal and freezes.
Same Problem
Pipp0 said:
Hello, today I played on my Nexus and it freezes and switch off. I re-plug the battery it start but freezes and switch off on boot screen. Later on I go home, I plug it on charger and eveything was solved.. untill I remove the charger again the phone freezes and refuse to turn on. Is the problem from battery or something worse?
Click to expand...
Click to collapse
I have the exact same problem, I can't destroy my 3rd phone yet. NOOOOOO.
Guys,
I've updated my SmartWatch 3 to 5.1 yesterday via OTA
Everything worked fine.
When battery was low, I charged it up from 9% to around 80% (I switched it off though)
It stuck charging at 80% as it was very hot I removed it from charge.
After 2-3 hours I charged again to complete from 80% to 100% even after 1-2 hours of charge It would not charge.
Today morning I did the same I wouldn't charge. I switched on the watch I got android wear logo and it directly switched off.
Now it's not switching on.
Any help I can get?
Yeah same issue here but it is harder than that ...
I installed TWRP on my watch, and when I received the 5.1 OTA, it seems that it did not want to install the update because I was not on recovery stock. Then, my SW3 started to lag, I was not able to install the ZIP via TWRP, and it was superhot, I was unable to boot Android Wear..
That's so ****ed up, man. I can't even know what should I do. xD
I've got the same (or really similar) problem my watch was out of battery, I put it on the charger, it showed normal charging battery icon, then when I tried to turn it on it doesn't show anything, the display is black and when I held down the power button it vibrated once. The problem is that it isn't only display fault because I can't connect to the watch with my mobile phone. Wat do?
---------- Post added at 06:43 AM ---------- Previous post was at 06:38 AM ----------
Mavi222 said:
I've got the same (or really similar) problem my watch was out of battery, I put it on the charger, it showed normal charging battery icon. When I woke up the watch was extremely hot and then when I tried to turn it on it didn't show anything, the display i black and when I held down the power button it vibrated once. The problem is that it isn't only display fault because I can't connect to the watch with my mobile phone. Wat do?
Click to expand...
Click to collapse
edit: Well that was weird, I unplugged it from the charger and put it there again and now the charging icon is back and when I pressed the button it started to boot. Weird.
Me, too.
After OTA today, my watch is dead. Even long press power button can make freeze screen reboot.
sharukhmohammed said:
Guys,
I've updated my SmartWatch 3 to 5.1 yesterday via OTA
Everything worked fine.
When battery was low, I charged it up from 9% to around 80% (I switched it off though)
It stuck charging at 80% as it was very hot I removed it from charge.
After 2-3 hours I charged again to complete from 80% to 100% even after 1-2 hours of charge It would not charge.
Today morning I did the same I wouldn't charge. I switched on the watch I got android wear logo and it directly switched off.
Now it's not switching on.
Any help I can get?
Click to expand...
Click to collapse
Okay guys, here my solution, it worked for me :
If the screen of your SW3 is completly dark:
1) Just let it plug. In fact, the watch is charging, it's just not shown up (I dunno why...)
2) Let it like that for 1 hour, and then unplug it and let it cool down for 10 mn.
3) Install the Sony Companion App on your PC.
4) Keep ressing the power button of your watch til a screen with the watch and USB appears.
5) Plug It to your PC, open the Companion App.
6) Somewhere in the menus, you can resinstall the OS of the watch, RESET it, find the menu.
7) Let your watch restart.
And you're done ! It worked for me, so try.
I left it aside from morning to evening. Didn't even touched it. It completely discharged. So I kept to charge once again and it magically booted up and now working fine. Seems pretty weird. ?
Sent from Galaxy Note II using XDA Premium App
As I read in other post, I can confirm there is some kind of bug when you are charging your SW3, if you turn it on with the usb cable charging and the screen showing the battery %, the smartwatch gets like frozen and doesn't do anything.. In case you have this problem, you should wait until the battery goes to 0%, start charging your sw3 BUT when you are going to turn it on again first unplug the usb cable and wait until the battery % display dissapears.. I did it after I read it in other post in XDA (I don't have the link here.. I was searchig for it on another computer) and worked for me.
I hope it works for all.. sorry if my English it's not perfect hehe
I found the link: http://forum.xda-developers.com/smartwatch-3/help/smw3-wont-start-t3192354