Related
[Q&A] [HOWTO][TAR][OUDHS] THE ODIN THREAD :: Return to stock, fix soft brick :: 5/7/
Q&A for [HOWTO][TAR][OUDHS] THE ODIN THREAD :: Return to stock, fix soft brick :: 5/7/13 MDL
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [HOWTO][TAR][OUDHS] THE ODIN THREAD :: Return to stock, fix soft brick :: 5/7/13 MDL. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
i did all this to my s4 but now when i boot it, says Kernel Is Not Seandroid Enforcing, Set Warranty Bit
also when i booted the phone the wifi does not work. could you help with this problem?
Samsung Galaxy S4
Is This ''UVUAMDL Official TAR'' for Samsung Galaxy S4?
Ayaz Gill said:
Is This ''UVUAMDL Official TAR'' for Samsung Galaxy S4?
Click to expand...
Click to collapse
Yes
UPDATE: I fixed the issue while posting this, the solution is included. I am hoping by posting this it may help someone having the same problem, because I spent hours and days trying to solve the issue. Sorry the post is so long.
This is my first post.. I am in desperate need of help!
I have searched everywhere, and cannot find any answers really.
I rooted my M919 at one point, and I could not receive OTA updates.
I do not know if it was rooted when I tried to update it with Odin though.
I was in a hurry (I know BIG mistake) and I never wiped my phone or anything before trying to flash the phone.
I think the phone may not be working because I may have not used triangle away before, but I am not sure if I ever used it. I did the root a long time ago.
I have tried changing USB cords, computers, drivers, md5 files, different Odin versions, flashing PIT file, you name it, I have probably tried it
When I boot the phone the currupt recovery screen shows up. Kies will not recognize the phone.
In the left corner it says:
ODIN MODE
...SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
I can still access "downloading" mode, and it says the same as above.
Odin gives me different errors depending on the file I am attempting to flash
The reason I tried flashing the PIT file is because it would sometimes say
I am not completely sure what update I was using before this all happened, but I think it may have been this one, unrooted?:
CF-Auto-Root-jfltetmo-jfltetmo-sghm919.tar.md5
Error codes are as follows:
While flashing 4.4.4 (Odin 3.10)
M919UVUFNH7_M919TMBFNH7_M919UVUFNH7_HOME.tar.md5
JFLTE_USA_TMO_16G.pit
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUFNH7_M919TMBFNH7_M919UVUFNH7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Recovery File I found (Odin 3.09)
JFLTE_USA_TMO_16G.pit
openrecovery-twrp-2.8.0.1-jfltetmo.tar
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Recovery File I found (Odin 3.09)
JFLTE_USA_TMO_16G.pit
openrecovery-twrp-2.8.0.1-jfltetmo.tar
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
One time I tried using this and it passed!!!
This ONLY works on 3.07 to my knowledge though. It fails on every other Odin
Recovery File I found (Odin 3.07)
JFLTE_USA_TMO_16G.pit
openrecovery-twrp-2.8.0.1-jfltetmo.tar
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
The screen is now frozen on the "Samsung Galaxy S4" screen and just shuts off if trying to boot into recovery mode.
If plugged into USB while trying to boot into recovery it launches the recovery file I just flashed!
I went back into download mode, and plugged the phone back in.
I opened Odin 3.07 again, since I had success with the recovery file.
I tried flashing 4.4.4 again M919UVUFNH7_M919TMBFNH7_M919UVUFNH7_HOME.tar.md5
and it failed while only having Auto Reboot checked. I tried launching it with Auto Reboot AND F Reset Time, and it worked!! Hope this helps someone!!
Hi DarkMenace - would it be possible for you to send me signed M919 PIT file as well? Thanks
shaqto said:
Hi DarkMenace - would it be possible for you to send me signed M919 PIT file as well? Thanks
Click to expand...
Click to collapse
Replied to your email. Not sure if I still have it but I may be able to find it if you say it's not there.
alright i did a no no... I tried flashing back to stock odin when my phone was encrypted .. now its softbricked.
everytime i try to flash the stock odin, it always fails at system.img ext4. Need some help guys, its been softbricked for a week. I flashed philz touch twrp on it so I do recovery on it. any ideas?
doesnt work
Bricked my s4/but i had twrp installed to fix it
I'm getting a Fail message in Odin over and over. I've downloaded the .zip twice so I don't think it's an issue with a corrupt file... The .dll is in my Odin folder and everything. Pretty confused and today is my last day to send my phone back into T-Mobile before they charge me.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
asmth00 said:
I'm getting a Fail message in Odin over and over. I've downloaded the .zip twice so I don't think it's an issue with a corrupt file... The .dll is in my Odin folder and everything. Pretty confused and today is my last day to send my phone back into T-Mobile before they charge me.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
What version Bootloader/Modems do you have now on the phone? If the version you have now has Knox, then you can't downgrade to MDL.
If you are not sure, you can use this free app: https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en
If the version is MK2 or newer, you can't downgrade to MDL.
You can find newer firmwares either on the SamMobile.com site, or on this thread: http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Rob
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
In odin, it says 0:[COM4] on the top left
You have 0:[COM3] in your screenshot
Is there a problem or something?Or is it fine?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SGH-M919-UVUAMDB-k0nane.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
I get this when i click start
i have a gt-1905 softbricked
please help me
AziNoapte said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SGH-M919-UVUAMDB-k0nane.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
I get this when i click start
i have a gt-1905 softbricked
please help me
Click to expand...
Click to collapse
If you have a GT-1905 (which I can't find), you shouldn't be trying to flash FIRMWARE for a T-Mobile phone (SGH-M919). That will brick your phone.
If it is an S4, you should be able to take off the back and look under the battery for the model number.
You can flash ROMs, but not firmware between different S4 models. Try finding the FIRMWARE for your phone, and flash that. Also, verify your model, because GT-1905 isn't a Samsung model number.
You can find firmwares here: http://www.sammobile.com/firmwares/
Rob
rlichtefeld said:
If you have a GT-1905 (which I can't find), you shouldn't be trying to flash FIRMWARE for a T-Mobile phone (SGH-M919). That will brick your phone.
If it is an S4, you should be able to take off the back and look under the battery for the model number.
You can flash ROMs, but not firmware between different S4 models. Try finding the FIRMWARE for your phone, and flash that. Also, verify your model, because GT-1905 isn't a Samsung model number.
You can find firmwares here: ------------To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links--------------
Rob
Click to expand...
Click to collapse
i messed up the writing cuz i was scared
I have 19505
I managed to get to 4.2.2 with konane`s guide,got the stock tar but wifi doesnt work on my S4
Can you help me fix it?
Or if it is impossible, can i upgrade to KitKat?
AziNoapte said:
i messed up the writing cuz i was scared
I have 19505
I managed to get to 4.2.2 with konane`s guide,got the stock tar but wifi doesnt work on my S4
Can you help me fix it?
Or if it is impossible, can i upgrade to KitKat?
Click to expand...
Click to collapse
Since this forum is for the T-Mobile variant of the S4, and I'm not familiar with the GT-I9505, I would suggest you try the forum for that model:
http://forum.xda-developers.com/galaxy-s4
If you flashed a T-Mobile tar to your I9505, it is probably because of the radio/modem which was designed for the T-Mo model. There should be links in that forum about no WiFi, etc.
Rob
Hello gang. Got a new circuit board installed two weeks ago. Got the phone back, started setting it up, and after about an hour the touchscreen quit working. >8\
I emailed the shop and they said "could be because you're rooted."
Smelled like bull**** to me, but giving them the benefit of the doubt I figured I'd try to flash back to stock. (Which I WAS actually stock, I had the 4.4.4 OTA update, and then rooted and de-bloated.)
Anyway, I downloaded the "Stock firmware" (SGH-M919-UVUAMDB-k0nane.tar.md5) from post 1 in the title thread and flashed it with Odin.
SEEMS to be working, but oddly enough I have a M919UVUFNH7 baseband and bootloader, but Android 4.4.2, which based on my reading, should be impossible?
Also, like several other posters, I have no wifi.
In any event, I am currently downloading the NH7 firmware from sammobile. Says 2 hours to go.
Will try to flash that with Odin and we'll see what happens. Anyone have suggestions in the meantime?
OK - follow-up. I downloaded M919UVUFNK2_M919TMBFNK2_M919UVUFNK2_HOME.tar and flashed it with Odin. Even though Odin said "Boot" and "Modem" in the flashing process, I still seem to have NH7 bootloaders and baseband.
Help?
Well, never mind. I don't care anymore. Tried to replace my glass and cracked the digitizer. Dunno if I'm down to drop another $120 on this thing now.
$300 purchase price
$100 circuit board replacement
$12 glass
Now $120 for a display? I might just call knock it off with this thing.
Ok, so yesterday i was trying to flash a custom rom on my Fame DUOS s6812i, the phone wasn't rooted or anything, so i did the process of rooting and everything via odin following the tutorial in this thread http://forum.xda-developers.com/showthread.php?t=2582851 and when i flashed the files for root and the recovery i got stuck in a bootloop, now i cant start the phone (obviously), i have no access to the recovery, all i can do is enter the download mode, So i tried to flash the stock firmware with odin and i keep getting this error:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S6812DDAMG3_S6812ODDAMG3_S6812DDAMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> BcmCP.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And in the screen of the phone shows twice this message : Secure: Signature Verification failed
Honestly i dont know what to do now, Kies just keep connecting and telling me to reset the phone, odin gives me this message, tried flashing kernel and recovery and it does not works, ive tried with 3 different firmwares from sammobile and the same. PLEAAAASSSEEEE! help me im kinda losing it over this and i dont know what to do.
are you install with the correct firmware ?
Hello,
I'm new here and I heared that Android 5.1 is still alive for SM-T805 but it seems that's not available in germany - very bad I found .
Now I wnat to know if it's possible to get a "How To" for an upgrade from 4.4.2 to 5.1 for my SM-T805. I know that there are some recent threads but in the topic
my modelnumber ins't listed and I also don't accept downloads (PIT and ROMs) which want to do a specieal task (e. g. "try out this app" or "try to win an iPhone 6"
and so on).
The download for PIT/ROM should be easily done over share-biz or any other file hoster.
I think that I'll need Odin to upgrade manually but I hope too that I don't need to root my device.
At last I want to know if 5.1 is good enough an comes with german language support or is there a better custom rom with german language support which
supports my SM-T805 and most/all Playstore-Apps and comes with better performence and longer battery duration and so on.
Sincerly,
Chaos234
Hi!
Hi! Samsung has not yet released the Android 5.1 for our decide, for now only the 5.0.2. What you can do is download the ROM (Stock ROM 5.0.2 Lollipop by Sammy) and flash it with a program called Odin. It's very simple to do, but one should be careful not to do anything other than prescribed. Simple: Download the ROM to your device, SM-T805, and download and install on your PC Odin, open it and then click in PDA and select the downloaded ROM. You can find the firmware on sammobile.com siteFinally, in its S Tab, select your language and enjoy. :fingers-crossed:
Everything you need to know is posted in the thread below.
One one of the rules of XDA is to search before asking repeated questions. XDA is not a spoon feeding forum.
I suggest you read the WHOLE thread before posting any questions.
http://forum.xda-developers.com/galaxy-tab-s/general/samsung-lollipop-range-tab-s-t3021612
Thanks for the link.
I'll update this night and then I response to this threat if all worked fine .
In addition, I searched for a link like yours in the developers section but I founded only a threat for SM-T800 and other Devices bot not my Device.
It's also better to pin the thread in the comlpeat section so that it's shown on each subboard in this category e. g. as an anouncement.
Edit 1: First try to get 5.0.2 failed! I'll now use recovery mode and try it again.
Q: Is CyanogenMod better as Android 5? What are the differences between them?
It seems that the ROM for my file is definitly defect!
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T805XXU1BOCC_T805VFG1BOC4_T805XXU1BOC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It fails every time on the "hidden.img" ... any ideas?
chaos234 said:
it seems that the rom for my file is definitly defect!
Code:
enter cs for md5..
check md5.. Do not unplug the cable..
please wait..
t805xxu1bocc_t805vfg1boc4_t805xxu1boc1_home.tar.md5 is valid.
checking md5 finished sucessfully..
leave cs..
added!!
odin v.3 engine (id:5)..
file analysis..
setupconnection..
initialzation..
get pit for mapping..
firmware update start..
singledownload.
sboot.bin
nand write start!!
boot.img
recovery.img
system.img
modem.bin
cache.img
hidden.img
fail!
complete(write) operation failed.
all threads completed. (succeed 0 / failed 1)
it fails every time on the "hidden.img" ... Any ideas?
Click to expand...
Click to collapse
You didnt read the whole thread like i said!
ashyx said:
You didnt read the whole thread like i said!
Click to expand...
Click to collapse
Well, used twrp now (ok ... now knox is set to 1 but it's ok for me ) and actually it's in the boot state.
I'll wait until it has botted finaly but it seems that it works now.
EDIT: Works now! *big smile*
So I rooted my s4 mini i9195 and flashed aicp ver 10 and now I have no wifi, no mobile, no lte, the haptic feedback buttons don't work, no led, and my computer doesn't recognize the s4 mini unless I go into download mode. When I start up the phone it says something about something being wrong with the internal hardware of my phone but it's a brand new phone and I didn't have these problems before flashing this rom. I tried using odin to go back to stock and it fails at nand-write start. I tried loading a new pit and that fails too. I'm completely stuck now. I have no idea what to do. Can someone please help me?
How you flashed aicp?
I used cwm.
Here's what comes up on odin when I try to flash back to stock:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUCOD3_I9195BTUCOD1_I9195XXUCOD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Can you enter in recovery mode?
yeah, I can. I tried clearing caches and data and flashing aicp over again, it didn't work-in fact, for whatever reason the aicp rom isn't in my sd card anymore.
Try to flash a stock deodexed rom from here http://forum.xda-developers.com/showthread.php?t=2552363 using your custom recovery
the problem with that is I can't get anything from my computer to my phone because the phone doesn't pop up on My Computer and the phone doesn't give me any options when it's plugged in. It's only recognized when in download mode and trying to do anything in download mode doesn't seem to work.
Download direct to you phone and then move to sdcard or download to pc and than just using a card reader move rom to your sdcard and then try to flash
I can't download directly to my phone, I have no connection whatsoever on my phone.
Use a computer and a card reader ))
I'm going to get an sd reader later today. I tried flashing the modem and this is what I got:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9195XXUCOC2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NON-HLOS.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006>
<ID:0/006> Receive Response from boot-loader
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
What firmware did you have before flashing aicp?
It was android 4.4.2 touchwiz I believe but I don't know the details. The phone was up-to-date and it's I9195
Whatever try to restore to a stock rom by flashing a deodexed rom
so the rom flashed properly but I still didn't have mobile data or wifi or haptic feedback. I'm not really worried about the haptic keys because I can just use softkeys if necessary but the mobile data and wifi are an issue. LED worked when I shut the phone down to put it into download mode to flash the modem. Flashing the modem was unsuccessful:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9195XXUCOC2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005>
<ID:0/005> Receive Response from boot-loader
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
And the phone came up with red lettered "Secure Check Fail Modem"
Try to call *#06# And tell what you get
At least look here http://forum.xda-developers.com/gal...rom-aicp-6-0-kk-4-4-4-9195-919015-10-t2907258
IMEI 990004400585315 / 01
I looked on that thread but nothing about my issue is coming up.
<ID:0/005> Receive Response from boot-loader
<ID:0/005> Complete(Write) operation failed.
Does this mean that I should flash a new bootloader? I never unlocked knox because beyond voiding the warranty, I didn't think it would have any effect on flashing but I may be wrong?
Your phone is definitely a "i9195" and not a "i9195L"? Was your phone locked to a network?
I found this http://forums.androidcentral.com/sa...ot-flash-really-really-stuck-please-help.html try to do how is described in the last thread but remember that you have a 9195 not a s3
So, I tried to remove my root from my Sprint Galaxy s6 via supersu and now I am in an infinite boot loop at the moment. I tried to install new firmware with Odin and I get the error :
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am really out of ideas on what to do here really. Can someone help me. I can get into download mode and my model number is SM-G920P. I tried to remove the root because I did not know what I was doing with it but now looks like I need to learn more about it. Anything can help I just want to get on my phone.
That is an old firmware, try using the current one from here: http://forum.xda-developers.com/spr...uide-links-files-update-root-restore-t3366862
koop1955 said:
That is an old firmware, try using the current one from here: http://forum.xda-developers.com/spr...uide-links-files-update-root-restore-t3366862
Click to expand...
Click to collapse
I think that would be the one to fix it, downloading it now.
Thank you much, sir.