Develop Bugs

Can NOT install MultiRom.ME

Hi there,
I can not install any version of MultiRom.me ROM, except this one v8.0.1.0 Stable. Here is the detail of my weird issue.
A. What do you have?
Mimax 3/32GB with working TWRP 3.0.3-0
https://dl.twrp.me/hydrogen/twrp-3.0.3-0-hydrogen.img
v8.0.1.0 Stable ROM flashable .zip file (1)
http://ua.multirom.me/MROTA/STABLE/V8/V8.0/multirom_MIMAX_V8.0.1.0.MBCCNDG_v6.0.1_b13_e685363f8e.zip
v8.2.2.0 Stable ROM flashable .zip file (2)
https://vroms2fe7lh.multirom.me/MRO...AX_V8.2.2.0.MBCCNDL_v6.0.1_b24_8c9ad51076.zip
SuperSU 2.79 flashable .zip file (3)
https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip
B. What process did you use?
Booted to TWRP
Wiped fully (system, data, cache, davik cache)
Installed ROM (saved in USB OTG)
Installed SuperSU (saved in USB OTG)
Wiped Cache & Davik Cache
Rebooted​
C. What is your issue?
If I used the combo (1), (3) and process (B), everything worked well w/o any problem. But,
If I used the combo (2), (3) and process (B), it could not boot up. The Mi logo lighted on in 1s and shutdown immediately later whenever I pressed power button.
In addition, I could not boot into TWRP too.
Now I've been in rom (1) with working TWRP, and still could not flash rom (2).
Kindly help me explain it and show me how to solve this issue.
Thanks and Best Regards,
[email protected]

hello vietnam, my fb/athanh14 . i am using multirom 7.2.17 fine all. i think v8.0.1.0 can be rooted and v8.2.2.0 cant because android 7.
i think i can try again with no root.
i am vn too.

Stuck in Twrp reboot loop

I recently installed twrp and for my moto g5 then I did format data later on went for reboot system then I found no os installed so I installed a custom Rom later rebooted the system then I got stuck in twrp loop. I went through all the solution but it did not work so please help. Thank you

If you're on stock rom you need to remove dm-verity for it to boot (read faqs on twrp thread!)
For custom rom flash it correctly
Wipe
Advanced wipe
Wipe system data cache
Install
Select rom zip
Select gapps zip
Select root zip (optional)
Wipe cache
Restart

What architecture rom and twrp are you using?

Does anyone know how to install GSI for our wonderful Moto Z Play? I would appreciate

Hello guys s I have Xperience rom with treble support you know if you can install GSI and what is the process for this? I would appreciate greetings

https://github.com/phhusson/treble_experimentations/releases/tag/v105
Download arm64 a only vanilla image from this url.
Go to twrp
1. Go to wipe and factory reset
2. Go to mount and mount everything except otg and sd card
3. Go to install select image and flash downloaded file as system image
4. After successful flashing reboot your device
After doing this you can flash any gsi using same procedure.

Help with flashing Custom Rom on TA-1043

Hello,
I need some help with flashing Custom Rom on Nokia TA-1043 with unlocked bootloader.
I just tried Evolution X 4.0 and I followed exactly these steps:
1. Boot in to twrp
2. Format data by typing yes
3. Reboot to bootloader
4. Now again boot in to twrp
5. Wipe everything
6. Now copy rom zip & twrp installer zip to phone
7. Flash the rom zip & twrp installer zip
8. Change to alternative slot
Example if you are on Slot a Change to slot b if you are on b change to a
9. Wipe all except system & vendor
10. Reboot system
But my phone is stuck on bootanimation.
Maybe I just missed something...
Can someone help me please?

flash stock firmware
Sent from my TA-1054 using Tapatalk

Xiaomi Max 3 stuck on boot after Unlock + TWRP Format Data

So here's what I did to cause my phone to get stuck on the logo screen:
1. Unlocked my phone using the Mi Unlock
2. Used ADB to install twrp-3.3.1-0-nitrogen
3. I couldn't mount my Data or SD Card folders due to encryption, so someone told me to use TWRP to format data, which I did. It didn't boot up after that.
I've tried the following fixes:
1. TWRP > Advanced Wipe > Cache / Data / Internal Storage / System
2. TWRP > Install > MIUI 11 V11.0.2.0.PEDCNXM
3. TWRP > Install > MIUI 11 V11.0.3.0.PEDCNXM
4. TWRP > Install > Magisk-v20.4
No luck, still stuck on boot. Anyone kind enough to please help?

I had the same problem when I backed up the global rom with OrangeFox and restarted the system without installing anything.
The following procedure worked for me.
User the latest version of TWRP 3.3.1 do not use OrangeFox
1. First you must remove the encryption, Wipe> Format Data, confirm by typing "yes"
2. Advanced Wipe and clean Dalvik, Cache, Data, System and Vendor.
3. Then proceed with the installation.
In my case I installed xiaomi.eu_multi_MIMAX3_V11.0.2.0.QEDCNXM_v11-10
Hope this helps!

irinho said:
I had the same problem when I backed up the global rom with OrangeFox and restarted the system without installing anything.
The following procedure worked for me.
User the latest version of TWRP 3.3.1 do not use OrangeFox
1. First you must remove the encryption, Wipe> Format Data, confirm by typing "yes"
2. Advanced Wipe and clean Dalvik, Cache, Data, System and Vendor.
3. Then proceed with the installation.
In my case I installed xiaomi.eu_multi_MIMAX3_V11.0.2.0.QEDCNXM_v11-10
Hope this helps!
Click to expand...
Click to collapse
Thanks a lot for the reply!
I somehow managed to get it working with OrangeFox, so I'm going to try it for awhile till it breaks. But I can't seem to pass the SafetyNet Check in Magisk, so I might have to your tips eventually.
What I did was:
1. Use the MI Flash tool + 11.03 CN Fastboot ROM to get out of the boot loop.
2. Loaded OrangeFox-R10.1-stable-nitrogen and Magisk-v20.4 on an SD Card
3. ADB + Fastboot to install twrp-3.3.1-0-nitrogen, then installed OrangeFox
4. Using OrangeFox, installed Magisk-v20.4

Hadron001 said:
Thanks a lot for the reply!
I somehow managed to get it working with OrangeFox, so I'm going to try it for awhile till it breaks. But I can't seem to pass the SafetyNet Check in Magisk, so I might have to your tips eventually.
What I did was:
1. Use the MI Flash tool + 11.03 CN Fastboot ROM to get out of the boot loop.
2. Loaded OrangeFox-R10.1-stable-nitrogen and Magisk-v20.4 on an SD Card
3. ADB + Fastboot to install twrp-3.3.1-0-nitrogen, then installed OrangeFox
4. Using OrangeFox, installed Magisk-v20.4
Click to expand...
Click to collapse
I have not yet rooted with magisk on xiaomi.eu so I have no way of giving an opinion on what may have gone wrong in your case.
But did you install the most current magisk from magisk.me and clear the cache?
maybe this video can help you. shows a Brazilian installing orangefox and rooting with magisk in the global rom and everything works, Magisk passes the SafetyNet test. https://youtu.be/O5bq1HMFREI?t=328