Please send the link for exposed frame work for our device running android 71.2
Jagan17 said:
Please send the link for exposed frame work for our device running android 71.2
Click to expand...
Click to collapse
http://dl-xda.xposed.info/framework/sdk25/arm64/xposed-v88.1-sdk25-arm64.zip
I've flashed it but after reboot it's not been installed in my device
Anyway thank you for spending time for me
Jagan17 said:
I've flashed it but after reboot it's not been installed in my device
Anyway thank you for spending time for me
Click to expand...
Click to collapse
Did you install the Xposed Installer apk?
If yes then try flashing the framework uploaded on 8th of October from the link:
http://dl-xda.xposed.info/framework/sdk25/arm64/
When i installed a module and reboot the phone doesn't boot up it stuck and I've to factory reset it
Jagan17 said:
When i installed a module and reboot the phone doesn't boot up it stuck and I've to factory reset it
Click to expand...
Click to collapse
Try the Xposed module for Magisk. Working fine for me.
On AEX 4.6 Official.
Related
Is there a specific zip of Xposed Framework I need to flash instead of the official 86 arm64 because every time I flash it, my phone will sit on the animates logo and never boot.
I tried topjohn's version as well.
RJMacReady said:
Is there a specific zip of Xposed Framework I need to flash instead of the official 86 arm64 because every time I flash it, my phone will sit on the animates logo and never boot.
I tried topjohn's version as well.
Click to expand...
Click to collapse
I am using official v.86 on OOS 3.2.7 and it is working nicely. I have no idea about CE.
tnsmani said:
I am using official v.86 on OOS 3.2.7 and it is working nicely. I have no idea about CE.
Click to expand...
Click to collapse
The sad part is that it was working up until I reflashed the twrp by eng. so I could get bluspark to work. I'm not sure if it's recovery, but it's frustrating. Does 3.2.7 have long screenshot?
RJMacReady said:
The sad part is that it was working up until I reflashed the twrp by eng. so I could get bluspark to work. I'm not sure if it's recovery, but it's frustrating. Does 3.2.7 have long screenshot?
Click to expand...
Click to collapse
Not to my knowledge. If it is there, I have not found it.
I'm using 3.5.5-CE firmware with BlackJubel Resurrection Remix ROM from 13.11.2016. Exposed is working and no problems so far. I doubt Exposed has something to do with the Firmware - maybe is incompatibility with the ROM
hey I am first time using xposed framework. I am using oneplus 3 and installed xposed framework v86 and apk v3.1.1.
I installed ++1 calculator module and hit the reboot option
My phone doesn't not reboot fully
It's stuck in boot logo ( two white circles moving around one red circle =
I waited for 40mins but nothing happened
[UPDATED] I flashed v87 and everything is fine now
Getting error 1
I'm on open beta 20
Elimental x kernel
Bluespak recovery
Any solution please
Amar5373 said:
Getting error 1
I'm on open beta 20
Elimental x kernel
Bluespak recovery
Any solution please
Click to expand...
Click to collapse
Well what have you tried? Do you have SuperSU installed? If so you can't flash Magisk over it..
Yes I was flashed super su?
Puddi_Puddin said:
Well what have you tried? Do you have SuperSU installed? If so you can't flash Magisk over it..
Click to expand...
Click to collapse
Bt before that get Same ploblem
Amar5373 said:
Bt before that get Same ploblem
Click to expand...
Click to collapse
I have no clue what you are trying to say.
Do you mean: "When I didn't flash Supersu I got the same problem?". If so dirty flash your rom, flash Magisk and see if it persists. May I also know your Rom setup
I have the same issue with my OP3
I have tried every possible way
I even flashed the rom and then reboot to flash magisk but didnt work either
I could flash v12
but v13.xx didnt work
Anas Qiblawi said:
I have the same issue with my OP3
I have tried every possible way
I even flashed the rom and then reboot to flash magisk but didnt work either
I could flash v12
but v13.xx didnt work
Click to expand...
Click to collapse
Same with me bro....
Magisck 12 working...?
Magisk 13.3 soft brick my phone, after reboot, my oneplus 3 stuck at boot loading. After I uninstall Magisk, everything is OK.
AnyBody got installed exposed on RAZER with Oreo 8.1.0 or whatever?
Yes works well just install xposed installer and then download and installed xposed through magisk version 27
parky169 said:
Yes works well just install xposed installer and then download and installed xposed through magisk version 27
Click to expand...
Click to collapse
You a Mazing thanks alot
When i try install via TWRP it say can't mount System & when i try to install it via Magisk it say installed but after reboot it doesn't work!
Screenshots
Bofahad said:
Screenshots
Click to expand...
Click to collapse
Try flashing the uninstaller through Xposed, then once it reboots install sdk27beta3 through Xposed then reboot again.
DarkestSpawn said:
Try flashing the uninstaller through Xposed, then once it reboots install sdk27beta3 through Xposed then reboot again.
Click to expand...
Click to collapse
Thank you man i did that already and it Works
Hello I have installed magisk and tried to install some module's but they're not showing up. Is magisk working fine on Android p beta 3?, Especially in terms of installing modules?
marvi0 said:
Hello I have installed magisk and tried to install some module's but they're not showing up. Is magisk working fine on Android p beta 3?, Especially in terms of installing modules?
Click to expand...
Click to collapse
Yes, it works for me and I installed couple of modules as well...
Great thanks will try again.
Wow I thought I was the only one. Modules not showing up here either and I've tried reinstalling in a bunch of different ways.
marvi0 said:
Hello I have installed magisk and tried to install some module's but they're not showing up. Is magisk working fine on Android p beta 3?, Especially in terms of installing modules?
Click to expand...
Click to collapse
marvi0 said:
Great thanks will try again.
Click to expand...
Click to collapse
gigatex said:
Wow I thought I was the only one. Modules not showing up here either and I've tried reinstalling in a bunch of different ways.
Click to expand...
Click to collapse
There's a list of modules out there that do/don't work on the developer previews. If I can find it again, I'll post a link :good:
Badger50 said:
There's a list of modules out there that do/don't work on the developer previews. If I can find it again, I'll post a link :good:
Click to expand...
Click to collapse
For me I noticed I have to reboot when I install each and every module. On my oneplus-5t I could install a bunch and then reboot once but on the pixel presumably due to the new firmware, you have to reboot after each module is installed and this definitely helped me.
Badger50 said:
There's a list of modules out there that do/don't work on the developer previews. If I can find it again, I'll post a link :good:
Click to expand...
Click to collapse
I don't think its a module specific compatibility issue. Every single module I try to install seems to install fine but just doesn't show up in the list of modules. I've tried a lot of different ones.
gigatex said:
I don't think its a module specific compatibility issue. Every single module I try to install seems to install fine but just doesn't show up in the list of modules. I've tried a lot of different ones.
Click to expand...
Click to collapse
Interesting. That's kinda weird because I've seen many users running them on the DP's. Does clearing magisk manager app cache/data help at all? And I'm sure you've granted storage permissions as well.
Badger50 said:
Interesting. That's kinda weird because I've seen many users running them on the DP's. Does clearing magisk manager app cache/data help at all? And I'm sure you've granted storage permissions as well.
Click to expand...
Click to collapse
Yep, tried that and also installing through manually patching boot image, flashing through TWRP and installing through direct installation through magisk manager. Sometimes the installation fails and on reboot it'll say it's installed but safetynet will fail. Even when it installs fine modules never work though. Module downloading is all fine, during installation it goes ahead just fine as well but the modules just don't show up in the list after installation/reboot.
gigatex said:
Yep, tried that and also installing through manually patching boot image, flashing through TWRP and installing through direct installation through magisk manager. Sometimes the installation fails and on reboot it'll say it's installed but safetynet will fail. Even when it installs fine modules never work though. Module downloading is all fine, during installation it goes ahead just fine as well but the modules just don't show up in the list after installation/reboot.
Click to expand...
Click to collapse
Don't know what to tell you my friend. Grab some install logs and head over to the magisk forums for some additional help is all I can suggest. I wish you luck :good:
I'm trying to figure out where i went wrong, because the last time i tried ROOTing PDP3, i couldnt boot and i am yet to see and PDP3 Patched_Boot.img or TWRP Recovery...
I did the following:
-Fastboot Flash-ALL PDP3
-Boot and set-up device PIN
-Boot into Fastboot
-Fastboot boot TWRP3212.img
-Use TWRP Installer to install Custom Recovery on device
-Reboot Recovery
-Flash Magisk v16.4
-REBOOT SYSTEM
-I think i ended up Looping @ G
Anyone use the magisk bootloopsaver module with our phones? Wanted to make sure it wouldn't mess anything up before I installed it lol
Veid71 said:
Anyone use the magisk bootloopsaver module with our phones? Wanted to make sure it wouldn't mess anything up before I installed it lol
Click to expand...
Click to collapse
Using it on OOS11. Saved me when one of the recent Magisk Canary releases had conflicts with modules and caused bootloops, it's a Godsend.
Basically if you bootloop because of modules, the boot animation stays on for like a minute, then the device restarts with all modules disabled (except for the Magisk Bootloop Saver module). You will need to re-enable them manually afterwards (and subsequently rebuild substratum themes etc).
Fishawy said:
Using it on OOS11. Saved me when one of the recent Magisk Canary releases had conflicts with modules and caused bootloops, it's a Godsend.
Basically if you bootloop because of modules, the boot animation stays on for like a minute, then the device restarts with all modules disabled (except for the Magisk Bootloop Saver module). You will need to re-enable them manually afterwards (and subsequently rebuild substratum themes etc).
Click to expand...
Click to collapse
Awesome thanks man!
Magisk has this by default for a long time now. pressing down vol key on boot will boot into safe mode with all modules disabled
Try this.
JohnFawkes said:
Magisk has this by default for a long time now. pressing down vol key on boot will boot into safe mode with all modules disabled
Click to expand...
Click to collapse
True, but this module makes it a normal boot not into safe mode.
TheKnux said:
Try this.
Click to expand...
Click to collapse
Will it work on a12l?
Tazist said:
Will it work on A12l?
Click to expand...
Click to collapse
@Tazist Try it. Sorry, the xda app is ****ing stupid.
Does anyone have a fresh copy of this? I keep getting an unzip error. Is development dead?
Droid_Nut said:
Does anyone have a fresh copy of this? I keep getting an unzip error. Is development dead?
Click to expand...
Click to collapse
Why not use magisk delta this have a bootloop protect build in
Thank you, should I patch the boot image or not?
ChrisFeiveel84 said:
Why not use magisk delta this have a bootloop protect build in
Click to expand...
Click to collapse
Tell us more, is it a module, or a version of Magisk?
Droid_Nut said:
Thank you, should I patch the boot image or not?
Click to expand...
Click to collapse
For magsik delta ?
Droid_Nut said:
Tell us more, is it a module, or a version of Magisk?
Click to expand...
Click to collapse
Is a magsik version from huskydg with build in bootloop protect and magisk hide
So its a fork of Magisk. https://magiskzip.com/magisk-delta/
ChrisFeiveel84 said:
For magsik delta ?
Is a magsik version from huskydg with build in bootloop protect and magisk hide
Click to expand...
Click to collapse
Huskydg also made the bootloop module, so patch it for either?
Actually never mind I just patched it on 3 phones with no problem.
As far as Delta, the newest Lsposed requires Zygisk, so you might find that you will need that anyways as more modules go that route. Any ways, I will give Delta try some time.
ChrisFeiveel84 said:
For magsik delta ?
Is a magsik version from huskydg with build in bootloop protect and magisk hide
Click to expand...
Click to collapse
I installed Delta, can I now turn off the bootloop module?
Droid_Nut said:
I installed Delta, can I now turn off the bootloop module?
Click to expand...
Click to collapse
No then when you enable it on magsik this isnatlled this modul
Few days ago, magisk brought update. I updated and restarted. 1st restart was ok, but 2nd restart after updating youtube revanved module caused bootloop. I had to flash firmware in, data gone. Will this module really help me if it happens next time or i should use TWRP. TWRP is not available for my device BTW. I will try to build it as it's open source.