need Lumia 430 ede and edp file - Windows 10 Mobile

Please help, my phone is dead and I need these files to recover it

please

http://www.lumiafirmware.com/ser/RM-1099

WojtasXda said:
http://www.lumiafirmware.com/ser/RM-1099
Click to expand...
Click to collapse
There was no ede file

To delete.

DilanChd said:
Maybe @gus33000
Click to expand...
Click to collapse
Sorry for the delay, paging @maruf8
Have fun!

gus33000 said:
Sorry for the delay, paging @maruf8
Have fun!
Click to expand...
Click to collapse
Wow thanks man!! :laugh: But where did you get it?? I also have a Lumia 540 (RM-1141). I want that's emergency files too.

maruf8 said:
Wow thanks man!! :laugh: But where did you get it?? I also have a Lumia 540 (RM-1141). I want that's emergency files too.
Click to expand...
Click to collapse
Here you go, RM-1141.

Hello! gus300,
I used the ede file for 540 for unlocking bootloader with wpi 2.3 but failed.
Hex mismatch!
(From wpi log)

ahsan547 said:
Hello! gus300,
I used the ede file for 540 for unlocking bootloader with wpi 2.3 but failed.
Hex mismatch!
(From wpi log)
Click to expand...
Click to collapse
The ede files have to match the device RM model number, you can't easily use one that doesn't have the same RKH

gus33000 said:
Here you go, RM-1141.
Click to expand...
Click to collapse
Thank you so much bro.. But where did you get these? I couldn't find it in lumia firmware website..

guss33000, Mine is RM-1141. But I am unable to unlock bootloader but wpi hard bricked my 540 (no display no vibration even it was not being detected by wdrt (it was not on the list after I clicked device not detected) ). But thank you very much your provided ede,edp file saved my lumia.

ahsan547 said:
guss33000, Mine is RM-1141. But I am unable to unlock bootloader but wpi hard bricked my 540 (no display no vibration even it was not being detected by wdrt (it was not on the list after I clicked device not detected) ). But thank you very much your provided ede,edp file saved my lumia.
Click to expand...
Click to collapse
Did WPI ask you to manually reset the phone? as emergency files aren't public it won't download them and you have to manually specify them for the phone to automatically reboot, when WPI doesn't have any it will ask you to manually reboot at times. If not then it's a brick I guess, you may want to post what you did and logs to the WPI thread for this issue to be fixed.

gus33000 said:
The ede files have to match the device RM model number, you can't easily use one that doesn't have the same RKH
Click to expand...
Click to collapse
gus33000 said:
Did WPI ask you to manually reset the phone? as emergency files aren't public it won't download them and you have to manually specify them for the phone to automatically reboot, when WPI doesn't have any it will ask you to manually reboot at times. If not then it's a brick I guess, you may want to post what you did and logs to the WPI thread for this issue to be fixed.
Click to expand...
Click to collapse
From wpi log I saw that the hex was mismatched and another thing is Lumia 540's ffu has only one version which 8.10.15137.148 and it's not supported by wpi so will I be able to unlock the boot loader of 540 using wpi2.3? If yes then how? I commented on wpi2.3 thread but got no reply.
Thank you

ahsan547 said:
From wpi log I saw that the hex was mismatched and another thing is Lumia 540's ffu has only one version which 8.10.15137.148 and it's not supported by wpi so will I be able to unlock the boot loader of 540 using wpi2.3? If yes then how? I commented on wpi2.3 thread but got no reply.
Thank you
Click to expand...
Click to collapse
You can unlock the bootloader with any OS version on your phone, as long as you have a supported ffu selected for boot files in the third field. By default when you use download all it's automatically selected for you.
If you're getting an issue with Qualcomm DLOAD, then try to not specify any emergency payload. WPI will work nonetheless, but it will ask you to manually reboot your phone from time to time.

gus33000 said:
You can unlock the bootloader with any OS version on your phone, as long as you have a supported ffu selected for boot files in the third field. By default when you use download all it's automatically selected for you.
If you're getting an issue with Qualcomm DLOAD, then try to not specify any emergency payload. WPI will work nonetheless, but it will ask you to manually reboot your phone from time to time.
Click to expand...
Click to collapse
Yes you are right but I downloaded Lumia 550's; it's version is 10.0.10586.107 and it's supported by wpi2.3 but wpi can't unlock boot loader. What should I do now??
I can't manually enable root access on images because wpi doesn't support 8.10.15137.148 and wpi crashes.

ahsan547 said:
Yes you are right but I downloaded Lumia 550's; it's version is 10.0.10586.107 and it's supported by wpi2.3 but wpi can't unlock boot loader. What should I do now??
I can't manually enable root access on images because wpi doesn't support 8.10.15137.148 and wpi crashes.
Click to expand...
Click to collapse
I unlocked the bootloader by 550's ffu bro.. It should work for you too ?

maruf8 said:
I unlocked the bootloader by 550's ffu bro.. It should work for you too
Click to expand...
Click to collapse
bro please please tell me the steps how did you do that. Please! IN 3 days I flashed my 540 about 45 times!
Are you from bangladesh?

ahsan547 said:
bro please please tell me the steps how did you do that. Please! IN 3 days I flashed my 540 about 45 times!
Are you from bangladesh?
Click to expand...
Click to collapse
I did it on a 430. I don't know about 540.
Yes i am

Related

HP Elite X3 Unlock Method?

I have a completely updated HP Elite X3 and have tried various ways to unlock the file system for modification with no success.
Does anyone know the proper way to unlock the file system on the HP Elite X3?
I've tried vcREG with no luck. Thanks All.
dfeldt91 said:
I have a completely updated HP Elite X3 and have tried various ways to unlock the file system for modification with no success.
Does anyone know the proper way to unlock the file system on the HP Elite X3?
I've tried vcREG with no luck. Thanks All.
Click to expand...
Click to collapse
could you please explain more what did you do ?
Witch version of vcREG dd you used ?
I'm prety sure you didn't check this post
http://forum.xda-developers.com/showpost.php?p=68479867&postcount=72
ngame said:
could you please explain more what did you do ?
Witch version of vcREG dd you used ?
I'm prety sure you didn't check this post
http://forum.xda-developers.com/showpost.php?p=68479867&postcount=72
Click to expand...
Click to collapse
Thanks for the response. I have followed the vcREG thread but did not do the part you just showed me with changing the name. I am attempting to do so in vcREG but it is not reading anything.
Would you mind telling me the steps to change the DeviceTargetInfo?
dfeldt91 said:
Thanks for the response. I have followed the vcREG thread but did not do the part you just showed me with changing the name. I am attempting to do so in vcREG but it is not reading anything.
Would you mind telling me the steps to change the DeviceTargetInfo?
Click to expand...
Click to collapse
You can use interop tools / custompfd or vcreg to modify this :
HKLM\System\Platform\DeviceTargetingInfo
Change the PhoneManufacturer to NOKIA
ngame said:
You can use interop tools / custompfd or vcreg to modify this :
HKLM\System\Platform\DeviceTargetingInfo
Change the PhoneManufacturer to NOKIA
Click to expand...
Click to collapse
Perhaps I am doing it wrong in vcREG.
Is this correct:
Open vcReg
Click Hkey_local_machine
Type path: HKLM\System\Platform\DeviceTargetingInfo
Type key: PhoneManufacturer
Hitting Read does nothing.
What are the steps to changing the Manufacturer in vcREG? Sorry to bug, I am a long time Android user and just moved to Windows for the first time. I appreciate the help!
dfeldt91 said:
Perhaps I am doing it wrong in vcREG.
Is this correct:
Open vcReg
Click Hkey_local_machine
Type path: HKLM\System\Platform\DeviceTargetingInfo
Type key: PhoneManufacturer
Hitting Read does nothing.
What are the steps to changing the Manufacturer in vcREG? Sorry to bug, I am a long time Android user and just moved to Windows for the first time. I appreciate the help!
Click to expand...
Click to collapse
Click Hkey_local_machine
Type path: System\Platform\DeviceTargetingInfo
Type key: PhoneManufacturer
ngame said:
Click Hkey_local_machine
Type path: System\Platform\DeviceTargetingInfo
Type key: PhoneManufacturer
Click to expand...
Click to collapse
After doing exactly this, I hit read and nothing shows up. I have typed the path correctly. I'm not sure what is going on. I am going to try a complete reset and then do it again.
dfeldt91 said:
After doing exactly this, I hit read and nothing shows up. I have typed the path correctly. I'm not sure what is going on. I am going to try a complete reset and then do it again.
Click to expand...
Click to collapse
hm, so try to edit this with other registry app like custompfd .
I'm sure that works
ngame said:
hm, so try to edit this with other registry app like custompfd .
I'm sure that works
Click to expand...
Click to collapse
Thanks again for the help, I am currently restoring the phone using Windows Device Recovery Tool to start fresh. I will try CustomPFD and report back any progress.
I am trying to install CustomPFD and am getting error 0X81030120 now and it fails. This is on a fresh reset phone with no modifications other than enabling Developer Mode.
How do you install CustomPFD without getting the error?
I am using XAPdeployment to install.
@ngame Accessing normal registry still requires ndtksvc.dll in System32 running. @dfeldt91
Go to "Registry Editor for All Device".
http://forum.xda-developers.com/windows-10-mobile/jailbreak-interop-unlock-windows-10-t3178140
Or you can use alternate registry editor.
http://forum.xda-developers.com/windows-10-mobile/interop-tools-appx-windows-10-mobile-t3373675
djamol said:
@ngame Accessing normal registry still requires ndtksvc.dll in System32 running. @dfeldt91
Go to "Registry Editor for All Device".
http://forum.xda-developers.com/windows-10-mobile/jailbreak-interop-unlock-windows-10-t3178140
Or you can use alternate registry editor.
http://forum.xda-developers.com/windows-10-mobile/interop-tools-appx-windows-10-mobile-t3373675
Click to expand...
Click to collapse
I attempt to deploy the roottool.xap but it hangs and hangs and never installs.
I jsut noticed that in the Info section of the phone it now says ACERINC whch is one of the things I tried changing the phone registry to for manufacturer so......maybe I'm making progress here? I really don't know. Could not get either of the above to install.
Following it... only via W10 for desktop, no way for the remote registry editing via Windows 7 Professional?
djamol said:
Or you can use alternate registry editor.
http://forum.xda-developers.com/windows-10-mobile/interop-tools-appx-windows-10-mobile-t3373675
Click to expand...
Click to collapse
The proper thread would actually be: http://forum.xda-developers.com/win...app-interop-tools-versatile-registry-t3445271
The OP even includes instructions on how to unlock for other oem devices.
---------- Post added at 08:14 AM ---------- Previous post was at 08:09 AM ----------
dfeldt91 said:
Could not get either of the above to install.
Click to expand...
Click to collapse
Make sure you're reading the Interop Tools installation instructions carefully and that you're using the one from the official thread which is here: http://forum.xda-developers.com/win...app-interop-tools-versatile-registry-t3445271
It should install properly
gus33000 said:
Make sure you're reading the Interop Tools installation instructions carefully and that you're using the one from the official thread which is here: http://forum.xda-developers.com/win...app-interop-tools-versatile-registry-t3445271
It should install properly
Click to expand...
Click to collapse
When I install Interop tools on the X3 it does not show up anywhere, as an app or in the extras location.
Ok, link was posted. I downloaded the file and installed it. Now the problem I have is when installing interop tools. I copy to SD card, click the dependency files to install then install interop tools by clicking on it. It doesn't show up as an app and doesn't show up in extras.
dfeldt91 said:
When I install Interop tools on the X3 it does not show up anywhere, as an app or in the extras location.
also, that link has TBD written in the spot for the OEM files. So the files are unavailable.
Click to expand...
Click to collapse
I just updated the OP again. And where did you see it should be in extras? Don't follow or read the older thread that got posted, go to the storage settings, make sure interop tools isn't listed at all, if it is, uninstall it, then download the current pre-release 8 of beta 1.9, and read carefully the instructions. You are required to install using device portal. If it failed, device portal should give you a specific error code. Just make sure to follow the installation instructions from the official thread and everything should go alright.
Edit: reopen the thread and download the other missing ndtk spkgs zip too. Forgot to include it.
gus33000 said:
I just updated the OP again. And where did you see it should be in extras? Don't follow or read the older thread that got posted, go to the storage settings, make sure interop tools isn't listed at all, if it is, uninstall it, then download the current pre-release 8 of beta 1.9, and read carefully the instructions. You are required to install using device portal. If it failed, device portal should give you a specific error code. Just make sure to follow the installation instructions from the official thread and everything should go alright.
Click to expand...
Click to collapse
Ok, let me give this another shot! Thanks for the help, it is appreciated!
NDTK files
Ok, Got the NDTK files installed and it is restarting...
..OK.. Success. IT is installed, I can browse files from my PC and delete them. I deleted the system apps I don't use such as Xbox, Get Help, Continuum, etc. They immediately force close when clicked on in the start menu but do not disappear when the phone is restarted. I noticed the app files showed back up under Data\SYSTEMAPPS as well.
Does anyone know how to permanently remove these apps from the start menu?
Elite X3
hello just bought this baby and it seems a normal user can't do much **** with it.... Microsoft store askes for money even for word...lol
please be kind to help me how can I manage to install cracked apps if this is possible... I have read that normal win 10 exes don't work
also how can I root my device....
thanks
dfeldt91 said:
Ok, Got the NDTK files installed and it is restarting...
..OK.. Success. IT is installed, I can browse files from my PC and delete them. I deleted the system apps I don't use such as Xbox, Get Help, Continuum, etc. They immediately force close when clicked on in the start menu but do not disappear when the phone is restarted. I noticed the app files showed back up under Data\SYSTEMAPPS as well.
Does anyone know how to permanently remove these apps from the start menu?
Click to expand...
Click to collapse

Possible to sideload older version of 'Advanced Info' ?

I'm trying to interop unlock my Lumia 550, but it seems the Advanced Info app has updated as when I get to step 2 of unlocking in the vcReg app, it just crashes. Is it possible to download and sideload an older version of the app to allow me to finish the interop unlock?
No
Sideload.
Just erase -zip extension.
augustinionut said:
Sideload.
Just erase -zip extension.
Click to expand...
Click to collapse
Cheers, will give it a go in a sec and see how it goes :good:
EDIT: Not working unfortunately, getting the same crash.
'Advanced Info' req interop unlocked device BTW
Connor_Price said:
Cheers, will give it a go in a sec and see how it goes :good:
EDIT: Not working unfortunately, getting the same crash.
Click to expand...
Click to collapse
Why dont use interoptool?
augustinionut said:
Why dont use interoptool?
Click to expand...
Click to collapse
It doesn't work. I have a Lumia 550, so I click on Restore NDTKSvc (x50) and it says it didn't find the file. However, I accidentally toggled the one for non x50 devices and can't figure out how to undo that, so maybe that is my issue.
You need to put the file inside phone ))
augustinionut said:
You need to put the file inside phone ))
Click to expand...
Click to collapse
I'm following this tutorial: https://forum.xda-developers.com/wi...creg-lumia-reg-editor-interop-unlock-t3451723
I get to step 5 and then get the crash. I have all of the necessary files on the phone.
augustinionut said:
You need to put the file inside phone ))
Click to expand...
Click to collapse
Sorry, I'm on my phone and accidentally posted twice.
https://forum.xda-developers.com/wi...app-interop-tools-versatile-registry-t3445271
Other OEM devices

[GUIDE] How to fix Windows Update Issue on CU builds - Error 0x80070273

For those who are still waiting for a fix for the update error and don't want to undergo the recovery process, I found a different solution, which doesn't need a recovery operation on the phone.
I tested it with success on my 1020 and another 925 which were stuck in the CU build .297.
Keep in mind that the parameters that I will use are specific to these phone models, so if you have a different one you need to find the parameters specific to your phone model.
This is an heuristic procedure, tested on a limited number of phones, so use it at your risk, keeping in mind that you could have problems or need to recover your phone loosing all your data, so do a proper backup before.
Let's start.
The problem appears because, during update phase, the oeminput.xml file becomes corrupted: as far as I know it happens only on some x20 models, and not for all the users.
Now we're going to rebuild it...
Go to the following link
https://msdn.microsoft.com/en-us/library/windows/hardware/dn756630(v=vs.85).aspx
Copy the content of example file oeminput.xml: i.e. copy the content of the framed zone after the phrase "The following example shows the contents of a sample ProductionOEMInput.xml file"
Paste in a .txt file which you'll rename and change extension so that it becomes oeminput.xml. Save it with notepad.
Now modify the file
at the node <SOC>{PROCESSOR_NAME}</SOC> modify {PROCESSOR_NAME} fake parameter in order to have the processor name of your phone: for the 920/925/1020 use QC8960
at the node <Resolution>480x800</Resolution> instead of 480x800 use the resolution of your phone: for the 920/925/1020 use 768x1280
in all the nodes related to language <Language>en-US</Language> use the language of your phone: I used for example it-IT because I have the phone in Italian language.
Save the file.
Now if you still don't have interop tools installed (but I think you should have if you arrived to CU with an x20 phone model) install it.
Launch interop tools and then click this device and enable full file system access. Reboot your phone, connect it to a pc with cable: you'll see more directories than usual, because you also unlocked system dirs: be careful not to delete or modify any dir apart from what you find in this guide or you'll risk to damage your phone. If you want to find your usual dirs (docs photos...etc), go to phone\Data\Users\Public. I advise you that after the procedure I couldn't deactivate full file system access, because it continues re-activating in interop tools, maybe there is a way: but you can live with this, because you can find the usual dirs in the path that I specified...
Now go to phone\windows\imageupdate, make a backup on pc of the current oeminput.xml and overwrite it with the new one.
At this point in the phone go to settings, update and then search for updates: you should find Fall Creators Update...
Good Luck!
p.s. I didn't extensively search on the forum if a similar guide has been already posted, in the case sorry for the duplication.
Thanks to Antonio who has actively participated in the realization of this guide
sigfrid696 said:
https://msdn.microsoft.com/en-us/lib...(v=vs.85).aspx
Click to expand...
Click to collapse
The link is wrong
Thank you!
I modified it, now it should be ok!
friend can you share the oeminput.xml file that you used?
NeoTriXz said:
friend can you share the oeminput.xml file that you used?
Click to expand...
Click to collapse
Done! Let me know if it works...change only language to match your phone language and do a proper backup of your original file...
sigfrid696 said:
Done! Let me know if it works...change only language to match your phone language and do a proper backup of your original file...
Click to expand...
Click to collapse
no friend did not work, I keep throwing the same error, some idea that can be or another solution?
NeoTriXz said:
no friend did not work, I keep throwing the same error, some idea that can be or another solution?
Click to expand...
Click to collapse
At this point I think it's not a problem of corrupted oeminput file.
I googled around...not so many people having the problem...I found this link...
https://answers.microsoft.com/de-de...nd-eimem/0a6e1776-9005-40e8-a18e-9eaf0f35b648
It's in german language, but from what I understood the problem has been solved with Recovery Tool via pc: I know that's not the best solution, but maybe better than remaining without updates. Another significative information is that an hard reset alone doesn't solve the issue!
I hope that can be of any help...
sigfrid696 said:
At this point I think it's not a problem of corrupted oeminput file.
I googled around...not so many people having the problem...I found this link...
https://answers.microsoft.com/de-de...nd-eimem/0a6e1776-9005-40e8-a18e-9eaf0f35b648
It's in german language, but from what I understood the problem has been solved with Recovery Tool via pc: I know that's not the best solution, but maybe better than remaining without updates. Another significative information is that an hard reset alone doesn't solve the issue!
I hope that can be of any help...
Click to expand...
Click to collapse
thank you friend, for your time, but I already solved it, well I had to perform a hard reset,
does this works for lumia 520
and what parameter should i used for my lumia 520 Rm 914
i'm stuck on 15063.251
and my lumia finds fall cu update
but shows Error 0x80070273
does this really resolve this error
i could not able to copy paste it it shows you don't have permission
how i get permission
---------- Post added at 06:42 AM ---------- Previous post was at 06:22 AM ----------
it gives me this error
Yash Agarwal windows said:
does this works for lumia 520
and what parameter should i used for my lumia 520 Rm 914
i'm stuck on 15063.251
and my lumia finds fall cu update
but shows Error 0x80070273
does this really resolve this error
Click to expand...
Click to collapse
I think you should use for 520
<SOC>QC8227</SOC>
<Resolution>480x800</Resolution>
If you receive an error when you try to overwrite oeminput.xml, it means that your phone has not been unlocked for full filesystem access. Please refer to the guide in order to enable full filesystem access
thanks
it worked for me
Getting this error code - 0x8018830f while updating to 14393.1884 (Lumia 730)
Can I try the fix from this post for this error?
Donz7733 said:
Getting this error code - 0x8018830f while updating to 14393.1884 (Lumia 730)
Can I try the fix from this post for this error?
Click to expand...
Click to collapse
this error is get due to incorrect processor no or incorrect screen resolution
Donz7733 said:
Getting this error code - 0x8018830f while updating to 14393.1884 (Lumia 730)
Can I try the fix from this post for this error?
Click to expand...
Click to collapse
You can examine your oeminput.xml file and check if it is somehow not well-formed.
If that is the case you can use
<SOC>QC8926</SOC>
<Resolution>720x1280</Resolution>
Thanks for the reply guys.
I couldn't wait longer, so went with an reset. It updated fine after that.
Later came to know it was some server issue
how do you replace the xml file? it says copying but refuses to actually replace the file.
rancorx2 said:
how do you replace the xml file? it says copying but refuses to actually replace the file.
Click to expand...
Click to collapse
you should need completely interop unlock your device using interop tools
then restart your phone
then after it copies without error
Yash Agarwal windows said:
you should need completely interop unlock your device using interop tools
then restart your phone
then after it copies without error
Click to expand...
Click to collapse
how is complete unlock ??????????
I use interop tools
bloody_earth said:
how is complete unlock ??????????
I use interop tools
Click to expand...
Click to collapse
The error overwriting oeminput.xml happens when you haven't obtained full filesystem access.
In order to obtain full filesystem access:
Open Interop Tools, then this device, then Interop Unlock.
Check Full Filesysytem Access and restart your device.
Refer to this thread to download correct version of Interop Tools
https://forum.xda-developers.com/windows-10-mobile/tutorial-restore-glance-windows-10-t3540571
Let me know if you can solve the problem this way.

GRUB2 for lumias

Hello everyone!
I compiled GRUB2.02_beta3 for armv7.
Added some fixes to make selection possible.
for its work you need unlock bootloader! (see wpinternals)
Time to go install your favourite distro....
the_R4K_ said:
Hello everyone!
I compiled GRUB2.02_beta3 for armv7.
Added some fixes to make selection possible.
for its work you need unlock bootloader! (see wpinternals)
Click to expand...
Click to collapse
What does it do anyway??
maruf8 said:
What does it do anyway??
Click to expand...
Click to collapse
It is a multiboot bootloader. You can look it up and read more about it if you search GNU Grub on the internet.
It is the bootloader of choice normally for linux distros. Ever installed a dual boot Windows/Ubuntu system, and have seen the boot menu appear to choose between Windows and Ubuntu?
nate0 said:
It is a multiboot bootloader. You can look it up and read more about it if you search GNU Grub on the internet.
It is the bootloader of choice normally for linux distros. Ever installed a dual boot Windows/Ubuntu system, and have seen the boot menu appear to choose between Windows and Ubuntu?
Click to expand...
Click to collapse
Oh yeah!! Now i got you?? So can we use it to dual boot android and windows in lumia??
I have MainOS and EFIESP mounted on a PC, how do I install grub onto the image?
-mounted using osfmount and extracted from the ffu.
-edit: figured it out.
maruf8 said:
Oh yeah!! Now i got you?? So can we use it to dual boot android and windows in lumia??
Click to expand...
Click to collapse
Only if you have windows XP
djtonka said:
Only if you have windows XP
Click to expand...
Click to collapse
What do you mean by that?
maruf8 said:
What do you mean by that?
Click to expand...
Click to collapse
That was an irony. Currently and in the future, there is no need of GRUB or any other bootloader for this almost dead platform, no one will port Android or any other OS'es for Lumias, it has practically no sense at all and almost impossible (because of lack of drivers source code etc.)
sensboston said:
That was an irony. Currently and in the future, there is no need of GRUB or any other bootloader for this almost dead platform, no one will port Android or any other OS'es for Lumias, it has practically no sense at all and almost impossible (because of lack of drivers source code etc.)
Click to expand...
Click to collapse
Hmm.. You're right... But I'll keep my lumia as a digital camera ?
jethro tarw said:
I have MainOS and EFIESP mounted on a PC, how do I install grub onto the image?
-mounted using osfmount and extracted from the ffu.
-edit: figured it out.
Click to expand...
Click to collapse
So...how?
augustinionut said:
So...how?
Click to expand...
Click to collapse
you must mount partitions, and follow the instructions
first need to make sure that EFIESP partition accessable from MainOS \ EFIESP
then unpack archive in MainOS root, and run as ADMINISTRATOR bcd.bat (like you do for phone)
My bricked 530 cant go in mass storage mode. I will try to mount efiesp.bin and apply grub inside, then flash this partition.
'I will try to mount efiesp.bin and apply grub inside, then flash this partition."
????
augustinionut said:
My bricked 530 cant go in mass storage mode. I will try to mount efiesp.bin and apply grub inside, then flash this partition.
Click to expand...
Click to collapse
For your bricked 530...what mode is it in that you are able to flash? Does it boot to UEFI? I have two 1320s stuck in emg QC-9008 mode that if I could get past the signature check I could save them, I flashed the wrong ffu and it won't boot since the RKH does not match what was flashed. I may have to get an ATF box just to salvage them but don't want to yet...
titi66200 said:
'I will try to mount efiesp.bin and apply grub inside, then flash this partition."
????
Click to expand...
Click to collapse
My lumia530 is unable to find a bootable option after i activated reset protection
So i think that with grub installed i will find a way to browse to boot specific boot file.
First, after unlock bootloader he cant enter in mass mode. And two.... https://forum.xda-developers.com/showpost.php?p=75197448&postcount=280
---------- Post added at 06:32 PM ---------- Previous post was at 06:31 PM ----------
nate0 said:
For your bricked 530...what mode is it in that you are able to flash?
Click to expand...
Click to collapse
I can flash any mode. She need gdr3 firmware....
augustinionut said:
My bricked 530 cant go in mass storage mode. I will try to mount efiesp.bin and apply grub inside, then flash this partition.
Click to expand...
Click to collapse
in your case i think you need check bootarm.efi and bootmgfw.efi and bcd ... (maybe some else because I can't tell about reset protection)
because grub running by windows boot manager.
for this I have two reasons:
first it's more safer.
second it's qualcomm bootloader wont start grub directly.(can't find boot option, when I replace bootarm.efi)
@the_R4K_
How would I set a BCD entry for the SD card slot?
nate0 said:
@the_R4K_
How would I set a BCD entry for the SD card slot?
Click to expand...
Click to collapse
if I get you right,
bcdedit /set {ID} device partition=D:
bcdedit /set {ID} path partition=D:\something
but for select item, need disable custom actions and need hardware camera button
I did few test.
Windows rt install.wim unpacked to SD without integrating any drivers: error INACCESSABLE_BOOT_DEVICE.
Windows rt boot.wim as winpe from SD without integrating any drivers: boot OK (thouch didn't work).
Windows phone 8 ffu converted to vhd and copied all files(include data,efiesp) to sd(one partition) without editing registry: boot failed (no boot logo, no bsod, just black screen)

QloaderHS-USB Qloader 9008 (com3)?

I've got a bricked Lumia 640 LTE the PC sees it as QHSUSB_BULK
Is there any fix?
Did you search the forums yet? Should try that first before posting...
https://forum.xda-developers.com/windows-phone-8/development/help-programmer-unbrick-jtag-t3082592
nate0 said:
Did you search the forums yet? Should try that first before posting...
https://forum.xda-developers.com/windows-phone-8/development/help-programmer-unbrick-jtag-t3082592
Click to expand...
Click to collapse
Thanks. But I'm lost when it says "HEX.hex and MS.img"etc.
I'm a noob
I'm gonna unbrick this Lumia 640 though. I know it.
You'll see... :good:
Ok, ask in that thread so that folks there can help. Also if you read through that thread you will see many answers to your questions.
jason_l367 said:
Thanks. But I'm lost when it says "HEX.hex and MS.img"etc.
I'm a noob
I'm gonna unbrick this Lumia 640 though. I know it.
You'll see... :good:
Click to expand...
Click to collapse
Open Windows Device Recovery tool
Click on My device is not detected,
click on lumia,
Windows Device recovery tool may ask you what RM it is and then will download emergency payloads for you and start flashing the phone.
You can as well just download emergency files from lumiafirmware.com and do the steps described in the recover your phone from dload thread. Hex and bins are for older models.
gus33000 said:
Open Windows Device Recovery tool
Click on My device is not detected,
click on lumia,
Windows Device recovery tool may ask you what RM it is and then will download emergency payloads for you and start flashing the phone.
You can as well just download emergency files from lumiafirmware.com and do the steps described in the recover your phone from dload thread. Hex and bins are for older models.
Click to expand...
Click to collapse
Thx, the device is dead so I can't recover with wdrt ,says my model (RM-1074) is not supported
But I'll look into that thread . I got up to passing the first command ,but as I said, I was lost after that
Also after it finishes and I enter the next command it says it can't find hex and ms.img
I give up. ?
jason_l367 said:
I give up.
Click to expand...
Click to collapse
go here, download the files in the zip file.
Run this command while making sure you replace <pathtodownloadedede/edp> with the proper path to both files, if you still get a file not found issue, please screenshot the command you typed in cmd as well as the path of the files:
Code:
thor2.exe -mode emergency -hexfile "<pathtodownloadedede/edp>\MPRG8x26_fh.ede" -edfile "<pathtodownloadedede/edp>\RM1096_fh.edp"
And don't give up, it's 100% sure you can unbrick this phone, you just have to be patient and properly do things
gus33000 said:
go here, download the files in the zip file.
Run this command while making sure you replace <pathtodownloadedede/edp> with the proper path to both files, if you still get a file not found issue, please screenshot the command you typed in cmd as well as the path of the files:
And don't give up, it's 100% sure you can unbrick this phone, you just have to be patient and properly do things
Click to expand...
Click to collapse
So if I place the folder containing the files in "C:/lumia" what would the proper command be
For some reason I have to type a ".\" before every command (?)
The model is RM_1074 . if you look at the screenshot it is wrong and just proceeds to the next line with a blinking cursor
Apologies ,haven't slept in over 24 hours
Remove "cd C:\lumia".
type only thor2.exe -mode emergency -hexfile "c:\lumia\MPRG8x26_fh.ede" -edfile "c:\lumia\RM1096_fh.edp"
titi66200 said:
Remove "cd C:\lumia".
type only thor2.exe -mode emergency -hexfile "c:\lumia\MPRG8x26_fh.ede" -edfile "c:\lumia\RM1096_fh.edp"
Click to expand...
Click to collapse
Here's the " lumia" folder in c: drive :laugh:
Lol it fails every time I try. In admin ,normal ,with/without ".\" , see Gdrive link
1. c:/Microsoft care suite/Windows Device Recovery Tool/ " :laugh:
start a power shell, enter the EXACT command. Lol I tried it about ten times
I bet you can't guess what happens.. :laugh::laugh:....
It just exits. And.. That's it.
No process, no "flashing phone" .. :silly: ;
Soo, I guess my phones f##ked. Thanks.
But I appreciate the efforts. I have been awake for 30 hours. I have my 930 rooted and unlocked etc.
My 640 cannot be restored I'm sure of it. There's no firmware on it it failed when I tried to restore the software with wdrt about 8 months ago after a Botchy insider build bricked it
:highfive: thanks anyway .
When using powershell from the WDRT directory you have to execute the thor2 command file as so:
.\thor2.exe
Run it like this:
Code:
.\thor2.exe -mode emergency -hexfile "C:\lumia\MPRG8x26_fh.ede" -edfile "C:\lumia\RM1096_fh.edp"
Just copy and paste
or open cmd prompt (click start and type cmd) and paste this:
"C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool\thor2.exe" -mode emergency -hexfile "C:\lumia\MPRG8x26_fh.ede" -edfile "C:
\lumia\RM1096_fh.edp"
Thanks. Its not going to work
I just opened cmd and copied the command . didn't work
I think I've made enough of an idiot of myself so I'd appreciate it if no one makes any more comments
Its been stuck on send signature for about ten minutes
jason_l367 said:
Its been stuck on send signature for about ten minutes
Click to expand...
Click to collapse
No worries at all man... Seems like it is still could be a signature mismatch then. You have a Lumia 640 LTE right? RM-1074 .
nate0 said:
No worries at all man... Seems like it is still could be a signature mismatch then. You have a Lumia 640 LTE right? RM-1074 .
Click to expand...
Click to collapse
Yeah bro. What will I do?
Is it hardware issue?

Categories

Resources