QloaderHS-USB Qloader 9008 (com3)? - Windows 10 Mobile

I've got a bricked Lumia 640 LTE the PC sees it as QHSUSB_BULK
Is there any fix?

Did you search the forums yet? Should try that first before posting...
https://forum.xda-developers.com/windows-phone-8/development/help-programmer-unbrick-jtag-t3082592

nate0 said:
Did you search the forums yet? Should try that first before posting...
https://forum.xda-developers.com/windows-phone-8/development/help-programmer-unbrick-jtag-t3082592
Click to expand...
Click to collapse
Thanks. But I'm lost when it says "HEX.hex and MS.img"etc.
I'm a noob
I'm gonna unbrick this Lumia 640 though. I know it.
You'll see... :good:

Ok, ask in that thread so that folks there can help. Also if you read through that thread you will see many answers to your questions.

jason_l367 said:
Thanks. But I'm lost when it says "HEX.hex and MS.img"etc.
I'm a noob
I'm gonna unbrick this Lumia 640 though. I know it.
You'll see... :good:
Click to expand...
Click to collapse
Open Windows Device Recovery tool
Click on My device is not detected,
click on lumia,
Windows Device recovery tool may ask you what RM it is and then will download emergency payloads for you and start flashing the phone.
You can as well just download emergency files from lumiafirmware.com and do the steps described in the recover your phone from dload thread. Hex and bins are for older models.

gus33000 said:
Open Windows Device Recovery tool
Click on My device is not detected,
click on lumia,
Windows Device recovery tool may ask you what RM it is and then will download emergency payloads for you and start flashing the phone.
You can as well just download emergency files from lumiafirmware.com and do the steps described in the recover your phone from dload thread. Hex and bins are for older models.
Click to expand...
Click to collapse
Thx, the device is dead so I can't recover with wdrt ,says my model (RM-1074) is not supported
But I'll look into that thread . I got up to passing the first command ,but as I said, I was lost after that

Also after it finishes and I enter the next command it says it can't find hex and ms.img

I give up. ?

jason_l367 said:
I give up.
Click to expand...
Click to collapse
go here, download the files in the zip file.
Run this command while making sure you replace <pathtodownloadedede/edp> with the proper path to both files, if you still get a file not found issue, please screenshot the command you typed in cmd as well as the path of the files:
Code:
thor2.exe -mode emergency -hexfile "<pathtodownloadedede/edp>\MPRG8x26_fh.ede" -edfile "<pathtodownloadedede/edp>\RM1096_fh.edp"
And don't give up, it's 100% sure you can unbrick this phone, you just have to be patient and properly do things

gus33000 said:
go here, download the files in the zip file.
Run this command while making sure you replace <pathtodownloadedede/edp> with the proper path to both files, if you still get a file not found issue, please screenshot the command you typed in cmd as well as the path of the files:
And don't give up, it's 100% sure you can unbrick this phone, you just have to be patient and properly do things
Click to expand...
Click to collapse
So if I place the folder containing the files in "C:/lumia" what would the proper command be
For some reason I have to type a ".\" before every command (?)
The model is RM_1074 . if you look at the screenshot it is wrong and just proceeds to the next line with a blinking cursor
Apologies ,haven't slept in over 24 hours

Remove "cd C:\lumia".
type only thor2.exe -mode emergency -hexfile "c:\lumia\MPRG8x26_fh.ede" -edfile "c:\lumia\RM1096_fh.edp"

titi66200 said:
Remove "cd C:\lumia".
type only thor2.exe -mode emergency -hexfile "c:\lumia\MPRG8x26_fh.ede" -edfile "c:\lumia\RM1096_fh.edp"
Click to expand...
Click to collapse
Here's the " lumia" folder in c: drive :laugh:
Lol it fails every time I try. In admin ,normal ,with/without ".\" , see Gdrive link
1. c:/Microsoft care suite/Windows Device Recovery Tool/ " :laugh:
start a power shell, enter the EXACT command. Lol I tried it about ten times
I bet you can't guess what happens.. :laugh::laugh:....

It just exits. And.. That's it.
No process, no "flashing phone" .. :silly: ;
Soo, I guess my phones f##ked. Thanks.

But I appreciate the efforts. I have been awake for 30 hours. I have my 930 rooted and unlocked etc.
My 640 cannot be restored I'm sure of it. There's no firmware on it it failed when I tried to restore the software with wdrt about 8 months ago after a Botchy insider build bricked it
:highfive: thanks anyway .

When using powershell from the WDRT directory you have to execute the thor2 command file as so:
.\thor2.exe
Run it like this:
Code:
.\thor2.exe -mode emergency -hexfile "C:\lumia\MPRG8x26_fh.ede" -edfile "C:\lumia\RM1096_fh.edp"
Just copy and paste
or open cmd prompt (click start and type cmd) and paste this:
"C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool\thor2.exe" -mode emergency -hexfile "C:\lumia\MPRG8x26_fh.ede" -edfile "C:
\lumia\RM1096_fh.edp"

Thanks. Its not going to work
I just opened cmd and copied the command . didn't work
I think I've made enough of an idiot of myself so I'd appreciate it if no one makes any more comments

Its been stuck on send signature for about ten minutes

jason_l367 said:
Its been stuck on send signature for about ten minutes
Click to expand...
Click to collapse
No worries at all man... Seems like it is still could be a signature mismatch then. You have a Lumia 640 LTE right? RM-1074 .

nate0 said:
No worries at all man... Seems like it is still could be a signature mismatch then. You have a Lumia 640 LTE right? RM-1074 .
Click to expand...
Click to collapse
Yeah bro. What will I do?

Is it hardware issue?

Related

Rooting LG H735 G4 Beat

hi, tried to search everywhere but to no avail soo far.. does anyone knows if there is an existing root guide for LG G4 Beat? its sort of a diff model but there's no sub for it so i guess ill put it at here since its still under G4 family.. :/
Do you have Android 5.0 or 5.1 installed?
First of all. Before you start to try root, download the kdz file for your phone.
The kdz is needed if something went wrong (e.g. phone not booting).
You can use the LG Flash Tool to flash the kdz to a bricked phone.
Use this link with your IMEI:
Code:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI
If it works, please post the download link for the "kdz".
Or better post the output too, but delete your IMEI!
Your link will only work if you type:
csmgdl.lgmobile.com/dn/downloader.dev?fileKey=
and then add the rest of your url instead of the given link.
It's worth trying. You need to get a partition layout. Then @autoprime will give a full command to run in DL mode for dumping the system image, and flashing it once it's been injected with root. I can inject it for you once you have the system.img dump.
I wrote an guide how you can extract the GPT and calculate the dd parameters:
[How to] Determine dd Parameters For All LG G4 Models
http://forum.xda-developers.com/g4/h...lg-g4-t3184867
Do you know how to work with linux?
Please post the outputs of gdisk into a HIDE and CODE tag. Thank you.
Maybe you are a advanced user and can Inject root yourself with the autoroot.sh method (Inject_Root_G4.zip)?
Or do you need help?
I think you have Android 5.1.1 installed, so it is not possible to use Kingroot to root your device. Is that right?
dominik-p said:
I wrote an guide how you can extract the GPT and calculate the dd parameters:
[How to] Determine dd Parameters For All LG G4 Models
http://forum.xda-developers.com/g4/h...lg-g4-t3184867
Do you know how to work with linux?
Click to expand...
Click to collapse
Wow, thanks for that guide! I've been trying to figure out how to find the right dd params forever.
tabp0le said:
Wow, thanks for that guide! I've been trying to figure out how to find the right dd params forever.
Click to expand...
Click to collapse
Pleasure.
I think some people also knew how to do it, but no one wanted to write a guide.
AND ALWAYS CONSIDER:
You can brick your phone if you don't know what you are doing.
Backup your files before you change anything.
i think i got the link for the KDZ.. but when i
dominik-p said:
Do you have Android 5.0 or 5.1 installed?
First of all. Before you start to try root, download the kdz file for your phone.
The kdz is needed if something went wrong (e.g. phone not booting).
You can use the LG Flash Tool to flash the kdz to a bricked phone.
Use this link with your IMEI:
[CODEcsmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI[/CODE]
If it works, please post the download link for the "kdz".
Or better post the output too, but delete your IMEI!
Your link will only work if you type:
csmgdl.lgmobile.com/dn/downloader.dev?fileKey=
and then add the rest of your url instead of the given link.
Click to expand...
Click to collapse
ok i think i did it correctly.. heres the link
downloader.dev?fileKey=FWDEYI0132FMAUI263CCLO1/H73510b_00.kdz (had to cut it short cuz forum would not let me post new link :/ csmgdl.lgmobile.com/dn/ was before 'downloader')
heres the output file..
<response req_cmd="auth_model_check" status="OK">
<auth_model_check><result>OK</result>
<esn>-----MYIMEI----</esn>
<model>LGH735</model><suffix>ASEATS</suffix><msn>508KPUU032390</msn><esn_date/>
<sw_version>H73510B_00</sw_version>
<sw_url>fileKey=FWDEYI0132FMAUI263CCLO1/H73510b_00.kdz</sw_url> pkg03.lime.gdms.lge.com/dn/downloader.dev?
<sw_locale_url/><sw_recommand_uri/><app_version/><app_url/>
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type>EG</chip_type>
<prod_type>2</prod_type>
<buyer>SEA</buyer>
<file_name>H73510b_00.kdz</file_name>
</auth_model_check></response>
and yes its 5.1..
would be nice if theres a step by step guide cuz last phone i tired rooting was prolly galaxy tab and it was wayy easier :/
Ok, well done. Is 10b the same version as currently installed on your device?
Some other details would be interesting:
Do you have an unbranded device?
Where did you buy it / where do you live? (country)
Are you an advanced user? Do you know how to work with linux?
The next steps will be:
Calculate your dd parameters and backup your system partition into a img file. Read my guide:
[How to] Determine dd Parameters For All LG G4 Models
http://forum.xda-developers.com/g4/h...lg-g4-t3184867
Please post the outputs of gdisk into a HIDE and CODE tag.
Post your calculated dd parameters, so that we can verify it.
IMPORTANT: Keep the original (unchanged) system.img on your computer (zip it).
Then:
Copy the img file to a linux system and mount it. Create a testfile (test.txt) on the mounted system partition.
Copy the img file back to your phone and try to "dd" it back over your system partition.
Check if you see the testfile on your system partition.
If that worked you have successfully overwritten your system partition.
Then:
Try to inject root with the Inject_Root_G4.zip on your linux system.
Copy the new img file to your phone and "dd" it over your system partition.
Please ask if you are not 100% sure what to do.
You are responsible for what you are doing with your device.
Backup all your data (photos, videos, messages...) before going one step further.
dominik-p said:
Ok, well done. Is 10b the same version as currently installed on your device?
Some other details would be interesting:
Do you have an unbranded device?
Where did you buy it / where do you live? (country)
Are you an advanced user? Do you know how to work with linux?
The next steps will be:
Calculate your dd parameters and backup your system partition into a img file. Read my guide:
[How to] Determine dd Parameters For All LG G4 Models
http://forum.xda-developers.com/g4/h...lg-g4-t3184867
Please post the outputs of gdisk into a HIDE and CODE tag.
Post your calculated dd parameters, so that we can verify it.
IMPORTANT: Keep the original (unchanged) system.img on your computer (zip it).
Then:
Copy the img file to a linux system and mount it. Create a testfile (test.txt) on the mounted system partition.
Copy the img file back to your phone and try to "dd" it back over your system partition.
Check if you see the testfile on your system partition.
If that worked you have successfully overwritten your system partition.
Then:
Try to inject root with the Inject_Root_G4.zip on your linux system.
Copy the new img file to your phone and "dd" it over your system partition.
Please ask if you are not 100% sure what to do.
You are responsible for what you are doing with your device.
Backup all your data (photos, videos, messages...) before going one step further.
Click to expand...
Click to collapse
what do u mean 10b?
not really unbranded i guess? its a mid-tier version of the LG G4.. this is the phone.. http://www.lg.com/sg/mobile-phones/lg-G4-Beat
dont think its out at the US yet
bought it at Singapore as i recontacted my phone
nope i dont know how to use linux and im %100 not sure what to do :crying:
Ok so you are not a advanced user?
10b is the version of the kdz file. Goto Settings->Phone info->software version on your phone and post your software version.
First of all: It is not possible to root your phone without linux!
You don't have to install a linux on your computer (physically) but at least in an virtual environment (virtualbox, vmware player) or as a live distribution.
What you can do without linux is try to extract the GPT.
Which OS is installed on your computer (Win 7, 8, 10)?
Download the LG_Root.zip from
http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772
It contains the Send_Command.exe
You need this tool to open a special console when your phone is in download mode.
Do you know this tool and how to enter the download mode?
dominik-p said:
Ok so you are not a advanced user?
10b is the version of the kdz file. Goto Settings->Phone info->software version on your phone and post your software version.
First of all: It is not possible to root your phone without linux!
You don't have to install a linux on your computer (physically) but at least in an virtual environment or as a live distribution.
What you can do without linux is try to extract the GPT.
Which OS is installed on your computer (Win 7, 8, 10)?
Download the LG_Root.zip from
http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772
It contains the Send_Command.exe
You need this tool to open a special console when your phone is in download mode.
Do you know this tool and how to enter the download mode?
Click to expand...
Click to collapse
no im not an advanced user..
its software version is : V10b-SEA-XX
so i guess its a 10b?
im using windows 7 right now
Yes you have 10b installed now.
The XX means that it is unbranded.
SEA means southeast asia.
Win 7 is fine. Send_Command will work.
Download the zip from the above-mentioned thread.
Then:
Power off your device
When the device is powered off, hold volume up and insert a USB cable connected to the PC
Wait for the drivers to install
Click to expand...
Click to collapse
and follow the steps 7-9.
dominik-p said:
Yes you have 10b installed now.
The XX means that it is unbranded.
SEA means southeast asia.
Win 7 is fine. Send_Command will work.
Download the zip from the above-mentioned thread.
Then:
and follow the steps 7-9.
Click to expand...
Click to collapse
so i just download it, put it at desktop and skip all the methods till 6-9? do i have to enable developer mode before doing it?
No you don't need developer mode.
But it is no problem if you enabled it.
Are you able to open the console with Send_Command.exe?
dominik-p said:
No you don't need developer mode.
But it is no problem if you enabled it.
Are you able to open the console with Send_Command.exe?
Click to expand...
Click to collapse
i opened send_command.exe but it just closes back.. mine is at COM1 but idk how to change it
Update: it says NOTE: Do not attempt this on devices with 5.1.1 , at the time this method was posted it worked on many firmware 5.0.2 should i still go for it? im using 5.1.1
We won't follow the guide. We will do it like here:
http://forum.xda-developers.com/g4/orig-development/root-tmo-vzw-intl-variants-soon-root-lg-t3164765
(You will also find the thread is linked there.)
The thread is just a good help for the Send_Command tool.
You don't have to change the COM port.
Are you in download mode? Do you see the "Firmware Update" screen?
Use the ports.bat and note the "netdiag" COM port.
Inside of LG_Root folder hold shift and right click a blank space you should see "Open command window here"
Click to expand...
Click to collapse
Then enter:
Code:
Send_Command.exe \\.\COM#
Replace # with your number.
dominik-p said:
We won't follow the guide. We will do it like here:
http://forum.xda-developers.com/g4/orig-development/root-tmo-vzw-intl-variants-soon-root-lg-t3164765
(You will also find the thread is linked there.)
The thread is just a good help for the Send_Command tool.
You don't have to change the COM port.
Are you in download mode? Do you see the "Firmware Update" screen?
User ports.bat and note the "netdiag" COM port.
Then enter:
Code:
Send_Command.exe \\.\COM#
Replace # with your number.
Click to expand...
Click to collapse
Yup its in download mode i have the firmware update on my screen.. still to no avail i also installed LG driver and restarted.. opened send_command.exe it just closes back
or do i just enter the script after the # after special command? at because im now at this part http://i.imgur.com/fre9Z9l.png just that when i double-click send command it just closes back
dreamnoob said:
Yup its in download mode i have the firmware update on my screen.. still to no avail i also installed LG driver and restarted.. opened send_command.exe it just closes back
or do i just enter the script after the # after special command? at because im now at this part http://i.imgur.com/fre9Z9l.png just that when i double-click send command it just closes back
Click to expand...
Click to collapse
are you opening send command from the command prompt?
Do NOT double click on the Send_Command.exe
READ again:
Inside of LG_Root folder hold shift and right click a blank space you should see "Open command window here"
Click to expand...
Click to collapse
Then enter "Send_Command.exe \\.\COM#"
dominik-p said:
Do NOT double click on the Send_Command.exe
READ again:
Then enter "Send_Command.exe \\.\COM#"
Click to expand...
Click to collapse
oh okay means im on the right path..
so now i just do this as follows?
Type "id" and press enter (no quotes).
You should get back some text starting with "uid=(0)root gid=(0)root". If not, press CTRL-C, and do step 9 again (the application sometimes doesn't respond on the first command).
Run the command specified in the section below titled 'Commands to Run' to flash the rooted system image.
After a few minutes of sitting, you should get back a "#" prompt. This indicates the process has finished.
Type "LEAVE" (no quotes) and press enter. Your phone should reboot, and your phone will be rooted.

HP Elite X3 Unlock Method?

I have a completely updated HP Elite X3 and have tried various ways to unlock the file system for modification with no success.
Does anyone know the proper way to unlock the file system on the HP Elite X3?
I've tried vcREG with no luck. Thanks All.
dfeldt91 said:
I have a completely updated HP Elite X3 and have tried various ways to unlock the file system for modification with no success.
Does anyone know the proper way to unlock the file system on the HP Elite X3?
I've tried vcREG with no luck. Thanks All.
Click to expand...
Click to collapse
could you please explain more what did you do ?
Witch version of vcREG dd you used ?
I'm prety sure you didn't check this post
http://forum.xda-developers.com/showpost.php?p=68479867&postcount=72
ngame said:
could you please explain more what did you do ?
Witch version of vcREG dd you used ?
I'm prety sure you didn't check this post
http://forum.xda-developers.com/showpost.php?p=68479867&postcount=72
Click to expand...
Click to collapse
Thanks for the response. I have followed the vcREG thread but did not do the part you just showed me with changing the name. I am attempting to do so in vcREG but it is not reading anything.
Would you mind telling me the steps to change the DeviceTargetInfo?
dfeldt91 said:
Thanks for the response. I have followed the vcREG thread but did not do the part you just showed me with changing the name. I am attempting to do so in vcREG but it is not reading anything.
Would you mind telling me the steps to change the DeviceTargetInfo?
Click to expand...
Click to collapse
You can use interop tools / custompfd or vcreg to modify this :
HKLM\System\Platform\DeviceTargetingInfo
Change the PhoneManufacturer to NOKIA
ngame said:
You can use interop tools / custompfd or vcreg to modify this :
HKLM\System\Platform\DeviceTargetingInfo
Change the PhoneManufacturer to NOKIA
Click to expand...
Click to collapse
Perhaps I am doing it wrong in vcREG.
Is this correct:
Open vcReg
Click Hkey_local_machine
Type path: HKLM\System\Platform\DeviceTargetingInfo
Type key: PhoneManufacturer
Hitting Read does nothing.
What are the steps to changing the Manufacturer in vcREG? Sorry to bug, I am a long time Android user and just moved to Windows for the first time. I appreciate the help!
dfeldt91 said:
Perhaps I am doing it wrong in vcREG.
Is this correct:
Open vcReg
Click Hkey_local_machine
Type path: HKLM\System\Platform\DeviceTargetingInfo
Type key: PhoneManufacturer
Hitting Read does nothing.
What are the steps to changing the Manufacturer in vcREG? Sorry to bug, I am a long time Android user and just moved to Windows for the first time. I appreciate the help!
Click to expand...
Click to collapse
Click Hkey_local_machine
Type path: System\Platform\DeviceTargetingInfo
Type key: PhoneManufacturer
ngame said:
Click Hkey_local_machine
Type path: System\Platform\DeviceTargetingInfo
Type key: PhoneManufacturer
Click to expand...
Click to collapse
After doing exactly this, I hit read and nothing shows up. I have typed the path correctly. I'm not sure what is going on. I am going to try a complete reset and then do it again.
dfeldt91 said:
After doing exactly this, I hit read and nothing shows up. I have typed the path correctly. I'm not sure what is going on. I am going to try a complete reset and then do it again.
Click to expand...
Click to collapse
hm, so try to edit this with other registry app like custompfd .
I'm sure that works
ngame said:
hm, so try to edit this with other registry app like custompfd .
I'm sure that works
Click to expand...
Click to collapse
Thanks again for the help, I am currently restoring the phone using Windows Device Recovery Tool to start fresh. I will try CustomPFD and report back any progress.
I am trying to install CustomPFD and am getting error 0X81030120 now and it fails. This is on a fresh reset phone with no modifications other than enabling Developer Mode.
How do you install CustomPFD without getting the error?
I am using XAPdeployment to install.
@ngame Accessing normal registry still requires ndtksvc.dll in System32 running. @dfeldt91
Go to "Registry Editor for All Device".
http://forum.xda-developers.com/windows-10-mobile/jailbreak-interop-unlock-windows-10-t3178140
Or you can use alternate registry editor.
http://forum.xda-developers.com/windows-10-mobile/interop-tools-appx-windows-10-mobile-t3373675
djamol said:
@ngame Accessing normal registry still requires ndtksvc.dll in System32 running. @dfeldt91
Go to "Registry Editor for All Device".
http://forum.xda-developers.com/windows-10-mobile/jailbreak-interop-unlock-windows-10-t3178140
Or you can use alternate registry editor.
http://forum.xda-developers.com/windows-10-mobile/interop-tools-appx-windows-10-mobile-t3373675
Click to expand...
Click to collapse
I attempt to deploy the roottool.xap but it hangs and hangs and never installs.
I jsut noticed that in the Info section of the phone it now says ACERINC whch is one of the things I tried changing the phone registry to for manufacturer so......maybe I'm making progress here? I really don't know. Could not get either of the above to install.
Following it... only via W10 for desktop, no way for the remote registry editing via Windows 7 Professional?
djamol said:
Or you can use alternate registry editor.
http://forum.xda-developers.com/windows-10-mobile/interop-tools-appx-windows-10-mobile-t3373675
Click to expand...
Click to collapse
The proper thread would actually be: http://forum.xda-developers.com/win...app-interop-tools-versatile-registry-t3445271
The OP even includes instructions on how to unlock for other oem devices.
---------- Post added at 08:14 AM ---------- Previous post was at 08:09 AM ----------
dfeldt91 said:
Could not get either of the above to install.
Click to expand...
Click to collapse
Make sure you're reading the Interop Tools installation instructions carefully and that you're using the one from the official thread which is here: http://forum.xda-developers.com/win...app-interop-tools-versatile-registry-t3445271
It should install properly
gus33000 said:
Make sure you're reading the Interop Tools installation instructions carefully and that you're using the one from the official thread which is here: http://forum.xda-developers.com/win...app-interop-tools-versatile-registry-t3445271
It should install properly
Click to expand...
Click to collapse
When I install Interop tools on the X3 it does not show up anywhere, as an app or in the extras location.
Ok, link was posted. I downloaded the file and installed it. Now the problem I have is when installing interop tools. I copy to SD card, click the dependency files to install then install interop tools by clicking on it. It doesn't show up as an app and doesn't show up in extras.
dfeldt91 said:
When I install Interop tools on the X3 it does not show up anywhere, as an app or in the extras location.
also, that link has TBD written in the spot for the OEM files. So the files are unavailable.
Click to expand...
Click to collapse
I just updated the OP again. And where did you see it should be in extras? Don't follow or read the older thread that got posted, go to the storage settings, make sure interop tools isn't listed at all, if it is, uninstall it, then download the current pre-release 8 of beta 1.9, and read carefully the instructions. You are required to install using device portal. If it failed, device portal should give you a specific error code. Just make sure to follow the installation instructions from the official thread and everything should go alright.
Edit: reopen the thread and download the other missing ndtk spkgs zip too. Forgot to include it.
gus33000 said:
I just updated the OP again. And where did you see it should be in extras? Don't follow or read the older thread that got posted, go to the storage settings, make sure interop tools isn't listed at all, if it is, uninstall it, then download the current pre-release 8 of beta 1.9, and read carefully the instructions. You are required to install using device portal. If it failed, device portal should give you a specific error code. Just make sure to follow the installation instructions from the official thread and everything should go alright.
Click to expand...
Click to collapse
Ok, let me give this another shot! Thanks for the help, it is appreciated!
NDTK files
Ok, Got the NDTK files installed and it is restarting...
..OK.. Success. IT is installed, I can browse files from my PC and delete them. I deleted the system apps I don't use such as Xbox, Get Help, Continuum, etc. They immediately force close when clicked on in the start menu but do not disappear when the phone is restarted. I noticed the app files showed back up under Data\SYSTEMAPPS as well.
Does anyone know how to permanently remove these apps from the start menu?
Elite X3
hello just bought this baby and it seems a normal user can't do much **** with it.... Microsoft store askes for money even for word...lol
please be kind to help me how can I manage to install cracked apps if this is possible... I have read that normal win 10 exes don't work
also how can I root my device....
thanks
dfeldt91 said:
Ok, Got the NDTK files installed and it is restarting...
..OK.. Success. IT is installed, I can browse files from my PC and delete them. I deleted the system apps I don't use such as Xbox, Get Help, Continuum, etc. They immediately force close when clicked on in the start menu but do not disappear when the phone is restarted. I noticed the app files showed back up under Data\SYSTEMAPPS as well.
Does anyone know how to permanently remove these apps from the start menu?
Click to expand...
Click to collapse

Offical update to Nougat for N920A step by step. Enjoy !!!!

From The Moderator Oka1 - There are no viable links in this OP therefore, I am closing
Thanks
OK. As i promise to some nice people here, then i get it so here it is.
ADB sideload only update S4CQB2-to-U4EQC6. 1.41 GB file seems to me like nougat update.
Nougat Update Here S4CQB2-to-U4EQC6
MD5 checksum : 903aa5c5f26f430133481c4a2cfcdb69
Thanks for ABD instruction @ColoMtn
Make sure you know how to ADB sideload. I'm not responsible for any damage to your phone.
Steps:
1. Backup everything of importance on your phone!!!
2. Now, make sure you have "show file extension" enabled in Windows, and file is ready for ADB as you download SS-N920AUCS4CQB2-to-U4EQC6-UP.zip
3. Shutdown your phone
4. Enter recovery mode by pressing volume up, home and power button together
* A green Droid will appear on screen with the text Installing system update…
5. Using the Volume Button Navigate and the Power button to select ‘Apply Update from ADB’
6. Connect your phone via USB to your computer
7. Open a CMD prompt from your PC. Type cd
in my case: cd C:\Users\Norbarb\Desktop\Note5
8. Navigate to the directory that contains the update ‘SS-N920AUCS4CQB2-to-U4EQC6-UP.zip’
*Note I had issue when the directory contained a space. Moving the update to a directory with no spaces resolved the issue.
Also moved the adb driver to the same directory 'C:\Users\Norbarb\Desktop\Note5'
9. Type adb devices. You should see 1 device listed
10.Type adb sideload SS-N920AUCS4CQB2-to-U4EQC6-UP.zip
11. This took around 25 minutes to complete
12. Phone will now be updated Nougat
EDIT: Please post mirrors if you can. Thanks
For who may need it this is S4CQA1 to U4QC6 update. File is around 1.5 GB and MD5 is 23d4d4c58330b618001e76fc468732d9
Congratulations! Hopefully 928a will have it soon
vista1984 said:
Congratulations! Hopefully 928a will have it soon
Click to expand...
Click to collapse
You are talking about G928A ? I check but only what i get is security update to 4CQB1. If you want i can post it on S6E+ forum.
I just wanted to thank you for this, going to do it now!!!! This day keeps getting better and better!!!!!
norbarb said:
OK. As i promise to some nice people here, then i get it so here it is.
ADB sideload only update S4CQB2-to-U4EQC5. 1.41 GB file seems to me like nougat update.
Nougat Update Here
Thanks for ABD instruction @ColoMtn
Steps:
1. Backup everything of importance on your phone!!!
2. Now, make sure you have "show file extension" enabled in Windows, and file is ready for ADB as you download SS-N920AUCS4CQB2-to-U4EQC5.zip
3. Shutdown your phone
4. Enter recovery mode by pressing volume up, home and power button together
* A green Droid will appear on screen with the text Installing system update…
5. Using the Volume Button Navigate and the Power button to select ‘Apply Update from ADB’
6. Connect your phone via USB to your computer
7. Open a CMD prompt from your PC. Type cd
in my case: cd C:\Users\Norbarb\Desktop\Note5
8. Navigate to the directory that contains the update ‘SS-N920AUCS4CQB2-to-U4EQC5.zip’
*Note I had issue when the directory contained a space. Moving the update to a directory with no spaces resolved the issue.
Also moved the adb driver to the same directory 'C:\Users\Norbarb\Desktop\Note5'
9. Type adb devices. You should see 1 device listed
10.Type adb sideload SS-N920AUCS4CQB2-to-U4EQC5.zip
11. This took around 25 minutes to complete
12. Phone will now be updated Nougat
EDIT: Please post mirrors if you can. Thanks
Click to expand...
Click to collapse
Can anyone show a screen shot of the "About Device" section of the phone settings after applying this update? Thank you in advance!
Have you tried it yourself?I got this in recovery when adb it.
" failed to verify whole-file signature", "signature verification failed
"E:failed to verify whole-life signature" "E:signature verification failed"
Installation aborted.
ifanr said:
Have you tried it yourself?I got this in recovery when adb it.
" failed to verify whole-file signature", "signature verification failed
"E:failed to verify whole-life signature" "E:signature verification failed"
Installation aborted.
Click to expand...
Click to collapse
On what firmware currently are you? This update is only from baseband N920AUCS4CQB2. Also you may have corrupted recovery. To fix this you have to ODIN back to latest firmware and try again.
Anyway just in case i'm uploading raw file w/o .zip extension to another place.
norbarb said:
On what firmware currently are you? This update is only from baseband N920AUCS4CQB2. Also you may have corrupted recovery. To fix this you have to ODIN back to latest firmware and try again.
Anyway just in case i'm uploading raw file w/o .zip extension to another place.
Click to expand...
Click to collapse
It's S4CQB2.Could you please give me the md5?And I'm gonna to flash the recovery to work it out.
ifanr said:
It's S4CQB2.Could you please give me the md5?And I'm gonna to flash the recovery to work it out.
Click to expand...
Click to collapse
I post it MD5 in first post.
norbarb said:
I post it MD5 in first post.
Click to expand...
Click to collapse
Matched.I'll try some other ways to work it out.Tks.
ifanr said:
Matched.I'll try some other ways to work it out.Tks.
Click to expand...
Click to collapse
You may try removing .zip extension and try again. Sometimes works
i get cannot read SS-N920AUCS4CQB2-to-U4EQC5.zip
jerrycoffman45 said:
i get cannot read SS-N920AUCS4CQB2-to-U4EQC5.zip
Click to expand...
Click to collapse
Two resons :
1. corrupted file
2. file in wrong place
norbarb said:
Two resons :
1. corrupted file
2. file in wrong place
Click to expand...
Click to collapse
The file may corrupted.When I use winrar to unzip this file.It says there is a checksum error occurred in system\priv-app\Lookout_ATT\oat\arm\Lookout_ATT.odex. The file is corrupt.
I tried your ways but did not work out.
norbarb said:
Two resons :
1. corrupted file
2. file in wrong place
Click to expand...
Click to collapse
thats what i thought too but md5 checks and the files in the same folder as adb and fastboot
ifanr said:
The file may corrupted.When I use winrar to unzip this file.It says there is a checksum error occurred in system\priv-app\Lookout_ATT\oat\arm\Lookout_ATT.odex. The file is corrupt.
I tried your ways but did not work out.
Click to expand...
Click to collapse
I post it link to raw file try other one or re-download.
ifanr said:
The file may corrupted.When I use winrar to unzip this file.It says there is a checksum error occurred in system\priv-app\Lookout_ATT\oat\arm\Lookout_ATT.odex. The file is corrupt.
I tried your ways but did not work out.
Click to expand...
Click to collapse
jerrycoffman45 said:
thats what i thought too but md5 checks and the files in the same folder as adb and fastboot
Click to expand...
Click to collapse
Most of the time it is problem do to recovery. You may have to ODIN firmware back and try again.
Anybody flash this file w/o problems? I'm sorry but only Note 5 i have it is my wife's work phone and i can't mess with it.
norbarb said:
Most of the time it is problem do to recovery. You may have to ODIN firmware back and try again.
Anybody flash this file w/o problems? I'm sorry but only Note 5 i have it is my wife's work phone and i can't mess with it.
Click to expand...
Click to collapse
I'll try it. Looks I already messed up my phone.Lucky it's weekend.lol.
ifanr said:
I'll try it. Looks I already messed up my phone.Lucky it's weekend.lol.
Click to expand...
Click to collapse
ALL WHO TRY PLEASE STOP. Seems like uploaded file got corrupted. I'm uploading once more
norbarb said:
You are talking about G928A ? I check but only what i get is security update to 4CQB1. If you want i can post it on S6E+ forum.
Click to expand...
Click to collapse
It's very thoughtful of you. If you have time please post it at your convenience.

I think i got my phone brick please help anyone

Guys i tried to install MIUI 7 on my amazon firephone i downloaded all the files and did a reboot in recover all going good then when i tried to install miui files it got stuck in the recovery mood and i restarted the phone and now it is stucked on amazon logo nothing doing else even i tried wipe data twice from hard reset mood please help did it brick my phone? help me to solve this.
hamza said:
Guys i tried to install MIUI 7 on my amazon firephone i downloaded all the files and did a reboot in recover all going good then when i tried to install miui files it got stuck in the recovery mood and i restarted the phone and now it is stucked on amazon logo nothing doing else even i tried wipe data twice from hard reset mood please help did it brick my phone? help me to solve this.
Click to expand...
Click to collapse
if you can acces to recovery, the only thing you can do is adb sideload ...bin
with an original stock ROM for your fire phone
(.bin must be the extension of the file, that you can get from official amazon site)
pipataki said:
if you can acces to recovery, the only thing you can do is adb sideload ...bin
with an original stock ROM for your fire phone
(.bin must be the extension of the file, that you can get from official amazon site)
Click to expand...
Click to collapse
Thanks a lot for your help after starting this thread i did a lot of research about it and i got the same solution from Xda and i tried it is same manner as some nice people posted it on this site but now another issue is being created automatically which is adb sideload command is not working when i write the following command
adb sideload "filename.bin"
its shows me an error "*cannot read filename.bin"
i tried it by changing the file name as "update.bin" and also tried it same file name which i downloaded from the amazon site. Please help me to resolve issue. Thanks again.
hamza said:
Thanks a lot for your help after starting this thread i did a lot of research about it and i got the same solution from Xda and i tried it is same manner as some nice people posted it on this site but now another issue is being created automatically which is adb sideload command is not working when i write the following command
adb sideload "filename.bin"
its shows me an error "*cannot read filename.bin"
i tried it by changing the file name as "update.bin" and also tried it same file name which i downloaded from the amazon site. Please help me to resolve issue. Thanks again.
Click to expand...
Click to collapse
filename is the name of file... <file.bin> you have to download that file from amazon or see in index thread
pipataki said:
filename is the name of file... <file.bin> you have to download that file from amazon or see in index thread
Click to expand...
Click to collapse
yeah i downloaded the file from amazon site and its original name was "update-kindle-35.4.6.6_user_466001420.bin" but i changed it to "update.bin" and it didn't work.
hamza said:
yeah i downloaded the file from amazon site and its original name was "update-kindle-35.4.6.6_user_466001420.bin" but i changed it to "update.bin" and it didn't work.
Click to expand...
Click to collapse
its still not working still showing that error "cannot read file.bin"
hamza said:
its still not working still showing that error "cannot read file.bin"
Click to expand...
Click to collapse
If you have the device via adb (with adb devices command) you can do an adb sideload sure... so in your case I supose, the file is corrupted... better dont rename it... but, if you can connect via adb, you can sideload sure...
pipataki said:
If you have the device via adb (with adb devices command) you can do an adb sideload sure... so in your case I supose, the file is corrupted... better dont rename it... but, if you can connect via adb, you can sideload sure...
Click to expand...
Click to collapse
no file was not corrupted because i downloaded another file from another site and it is showing same error i really cant understand what is happening. Is there any administration need?
hamza said:
no file was not corrupted because i downloaded another file from another site and it is showing same error i really cant understand what is happening. Is there any administration need?
Click to expand...
Click to collapse
did you do adb devices first?... first you have to know if adb can connet with the device... that will be listed with that command... adb devices
if you want send an screenshot with the result of making adb devices
Try to sideload what version of fire os you had before MIUI upgrade. If you had fireos 4.6.6, sideload 4.6.6, if you had 3.6.5 sideload 3.6.5
ozan2 said:
Try to sideload what version of fire os you had before MIUI upgrade. If you had fireos 4.6.6, sideload 4.6.6, if you had 3.6.5 sideload 3.6.5
Click to expand...
Click to collapse
i was having 4.6.6 and i sideloaded this version i am shocked that all things i am doing are totally good but why this error is occuring
hamza said:
i was having 4.6.6 and i sideloaded this version i am shocked that all things i am doing are totally good but why this error is occuring
Click to expand...
Click to collapse
I think that here in my computer I have the original update of Stock Rom, If you want I can upload it to my shared folder...
(left 3 hours and 5 minutes, maybe)...
to be sure that the upload and the download then is rigth, I tell you the exactly weight of file...
1314263238 bytes, you can test if the file you had has the same weight...
pipataki said:
I think that here in my computer I have the original update of Stock Rom, If you want I can upload it to my shared folder...
(left 3 hours and 5 minutes, maybe)...
to be sure that the upload and the download then is rigth, I tell you the exactly weight of file...
1314263238 bytes, you can test if the file you had has the same weight...
Click to expand...
Click to collapse
Size of my file is 1.2 GBs which is approximately equal to your file as you told me. I actually download it from amazon original site not any third party site but yeah upload it and please give me the link i will surely be thankful to you. I really appreciate your help and really happy to be new here at Xda developer.
hamza said:
Size of my file is 1.2 GBs which is approximately equal to your file as you told me. I actually download it from amazon original site not any third party site but yeah upload it and please give me the link i will surely be thankful to you. I really appreciate your help and really happy to be new here at Xda developer.
Click to expand...
Click to collapse
is uploaded totally...
the url of shared folder is in my Lollipop thread...
Are you accesing sideload by recovery?...
sideload only works invoked in recovey of the phone, in safestrap or in stock recovery
pipataki said:
is uploaded totally...
the url of shared folder is in my Lollipop thread...
Are you accesing sideload by recovery?...
sideload only works invoked in recovey of the phone, in safestrap or in stock recovery
Click to expand...
Click to collapse
Yes I am accessing it through phone recovery because i cant turn my phone on thats why i cant use safestap thats why i put my phone on recovery mood and selects install from adb option then from laptop i open console by pressing nd holding shift and right click and selecting open command prompt where my original amazon rom is placed then i use to write the sideload command which is adb sideload <filename.bin> and the then it shows error *cannot read <filename.bin>
That is all the procedure what i do everytime and it get failed please let me know if i am doing any thing wrong in it. Thank you
hamza said:
Yes I am accessing it through phone recovery because i cant turn my phone on thats why i cant use safestap thats why i put my phone on recovery mood and selects install from adb option then from laptop i open console by pressing nd holding shift and right click and selecting open command prompt where my original amazon rom is placed then i use to write the sideload command which is adb sideload <filename.bin> and the then it shows error *cannot read <filename.bin>
That is all the procedure what i do everytime and it get failed please let me know if i am doing any thing wrong in it. Thank you
Click to expand...
Click to collapse
Try using another wire and/or another port and/or another file... (the original stock that I had is in my shared folder, that one for exemple or any other one)... I hope you could relive it...
pipataki said:
Try using another wire and/or another port and/or another file... (the original stock that I had is in my shared folder, that one for exemple or any other one)... I hope you could relive it...
Click to expand...
Click to collapse
Thank You so much for your such response got it okay the problem was i didn't unblock the update file which dont know earlier but as you reffer me another link i worked on it and i got my phone back. Once again thank you so much it was really nice to be here. I will suggest all my friends your site.
hamza said:
Thank You so much for your such response got it okay the problem was i didn't unblock the update file which dont know earlier but as you reffer me another link i worked on it and i got my phone back. Once again thank you so much it was really nice to be here. I will suggest all my friends your site.
Click to expand...
Click to collapse
you can go to mobile shop and it will cost only 200 to 300 rupee for software, i also had this issue (soft brick) then i tried alot but finally i go to mobile shop and install the software ..
hamza said:
Yes I am accessing it through phone recovery because i cant turn my phone on thats why i cant use safestap thats why i put my phone on recovery mood and selects install from adb option then from laptop i open console by pressing nd holding shift and right click and selecting open command prompt where my original amazon rom is placed then i use to write the sideload command which is adb sideload <filename.bin> and the then it shows error *cannot read <filename.bin>
That is all the procedure what i do everytime and it get failed please let me know if i am doing any thing wrong in it. Thank you
Click to expand...
Click to collapse
Hello,
This may be a stupid question but did you specify the proper path? ie: c:\'filename"
just a shot, good luck
slim1001 said:
Hello,
This may be a stupid question but did you specify the proper path? ie: c:\'filename"
just a shot, good luck
Click to expand...
Click to collapse
Yes man, his phone is recovered and I had this error, solution for "cannot read" is here: https://forum.xda-developers.com/fire-phone/help/adb-sideload-error-read-t3634246

[Q&A] ASUS Fonepad 7 K00E ME372CG - looking for correct files for xFSTK

Please, where can I find ME372CG files for xFSTK?
I want to restore bootloader of my ME372CG tablet.
I follow these instructions, which are for FE170CG:
https://forum.xda-developers.com/android/help/asus-fonpad-7-fe170cg-bricked-stuck-t3740819
But I did not find ME372CG files for xFSTK.
So I took them from official Asus ME372CG firmware (from UL-K00E-WW-7.6.0.0-user.zip).
I found different file names in ifwi folder and I am not sure, which to use fo xFSTK:
dnx_fwr_ctp_???.bin
ifwi_ctp_???.bin
CLVP_CSAB_FWR_DnX_20.29.bin
ME372CG_32_IFWI_v54.57_CSAB_PROD.bin
I could not find any Softfuse file either.
Most probably I do not have the correct files, because xFSTK download does not work.
The file names, which I used, and the result from xFSTK can be found here:
https://www.dropbox.com/s/cz8imzdrs1r551r/xFSTK_ME372CG files.JPG?dl=0
Where can I find the correct files for xFSTK?
Thank you very much.
Greetings from Slovakia
Juraj
---
Cause of malfunction:
My tablet reported some kind of UI error, so I restarted it (still within Android),
but it never started again. It just vibrates when switching on, always black screen (only almost unnoticeable flash of light on LCD, during switching on). The battery is full - I measured it.
Use this file, run as Administrator ME372CG Debrick.bat and connect your device.
https://gofile.io/d/P6Ja57
After that flash this raw file with asus flash tool and make sure to select right model name.
http://www.mediafire.com/file/fhtkb..._V11.2.3.33-raw_2015_SmartPhones.How.zip/file
Good Luck
Teddy Lo said:
Use this file, run as Administrator ME372CG Debrick.bat and connect your device.
https://gofile.io/d/P6Ja57
After that flash this raw file with asus flash tool and make sure to select right model name.
http://www.mediafire.com/file/fhtkb..._V11.2.3.33-raw_2015_SmartPhones.How.zip/file
Good Luck
Click to expand...
Click to collapse
Hey Teddy, The link has been expired! Can you upload it again?
I need FW DnX, IFWI, OS DnX for fonepad 7 ME372CG (K00e)
sid.1375 said:
Hey Teddy, The link has been expired! Can you upload it again?
I need FW DnX, IFWI, OS DnX for fonepad 7 ME372CG (K00e)
Click to expand...
Click to collapse
Hi, I received some suggestions from Teddy, but it did not work for me.
(I re-uploaded the files to Dropbox, so the links should work):
1. Download this zip: https://www.dropbox.com/s/1s5i85hd22yqlct/CSC_ME372CG_Debrick.7z?dl=0
2. Extract with 7-zip on your Desktop
3. Open extracted CSC_ME372CG_Debrick file ---> Right click on ME372CG Debrick.bat left click on Run as Administrator. And it should look like this:
https://www.dropbox.com/s/e3yulpxt70rn6ly/non-Administrator ME372CG Debrick.bat.png?dl=0
If that doesn't show up install this minimal adb and fastboot command
https://www.dropbox.com/s/zgr1ljdm13owlrs/minimal_adb_fastboot_v1.4.1_setup.exe?dl=0
Here is tutorial how to install:
https://forum.xda-developers.com/showthread.php?t=2317790
4. If the tool doesn't recognise your device press VOL + or VOl - and connect your device with pc while you are holding one of volume buttons.....
===
After I informed Teddy that it does not work for me,
he suggested this:
See this tutorial for another device to get the point, reinstall drivers and try again debrick files. Softfuse file I can't find for your device but with debrick.bat is trick for seconds I thing to get recognized to start flashing partition and firmware....
https://www.youtube.com/watch?v=xuD39TjQJGo
or buy package and download files for XFSTK.
https://easy-firmware.com/index.php?a=downloads&b=file&id=100391
(I have not bought those xFSTK files yet, but I will try it later this week and let you know.)
Juraj
jurajhotovy said:
Hi, I received some suggestions from Teddy, but it did not work for me.
(I re-uploaded the files to Dropbox, so the links should work):
1. Download this zip: https://www.dropbox.com/s/1s5i85hd22yqlct/CSC_ME372CG_Debrick.7z?dl=0
2. Extract with 7-zip on your Desktop
3. Open extracted CSC_ME372CG_Debrick file ---> Right click on ME372CG Debrick.bat left click on Run as Administrator. And it should look like this:
https://www.dropbox.com/s/e3yulpxt70rn6ly/non-Administrator ME372CG Debrick.bat.png?dl=0
If that doesn't show up install this minimal adb and fastboot command
https://www.dropbox.com/s/zgr1ljdm13owlrs/minimal_adb_fastboot_v1.4.1_setup.exe?dl=0
Here is tutorial how to install:
https://forum.xda-developers.com/showthread.php?t=2317790
4. If the tool doesn't recognise your device press VOL + or VOl - and connect your device with pc while you are holding one of volume buttons.....
===
After I informed Teddy that it does not work for me,
he suggested this:
See this tutorial for another device to get the point, reinstall drivers and try again debrick files. Softfuse file I can't find for your device but with debrick.bat is trick for seconds I thing to get recognized to start flashing partition and firmware....
https://www.youtube.com/watch?v=xuD39TjQJGo
or buy package and download files for XFSTK.
https://easy-firmware.com/index.php?a=downloads&b=file&id=100391
(I have not bought those xFSTK files yet, but I will try it later this week and let you know.)
Juraj
Click to expand...
Click to collapse
I tried that but it didn't work. Actually it's because we lost fastboot and droidboot.
About those xFSTK files, we can acquire them from rom (zip/raw). there is a zip file called "ifwi.zip" in the rom package.
I follow this tutorial to debrick it but I didn't make it:crying:
sid.1375 said:
I tried that but it didn't work. Actually it's because we lost fastboot and droidboot.
About those xFSTK files, we can acquire them from rom (zip/raw). there is a zip file called "ifwi.zip" in the rom package.
I follow this tutorial to debrick it but I didn't make it:crying:
Click to expand...
Click to collapse
Hi
Finally, did you can find a solution for K00E?
miter8 said:
Hi
Finally, did you can find a solution for K00E?
Click to expand...
Click to collapse
Unfortunately no.
Sorry for the late response.

Categories

Resources