Hi , i just bought a PX3 navi and my volume is always at maximum.
Please watch the video.
Any opinions ?
My car is a toyota prius with normal sound factory, no amplifier, no JBL.
https://photos.app.goo.gl/pX56pFWMWpdRFGFw2
Have you looked in factory settings?, it might be the level set at max in there, should be around 10.
Sent from my iPhone using Tapatalk
Related
How does it sound. Does it work good with stock speaker and does it handle pioneer or any brand speaker (up to 4) cause i can only amplifie my subwoofer in the back since the speakers are in the doors...
And i need a new radio. But i would like th have decend sound. At least that it will handle loud sound (without basse cause my subwoofer will do that)
And does anyone know if the screen can be tilted a bit? I use a mercedes w203 c180 and the dash is not flat it goes up so radio with a flip screen are aiming at my roof...
Anyway i migh br interested in one now that u can eq the sub..
And does it have 1 sub out at 2 rca speaker out or just 1 sub 1 pair of speaker (rca cable i mean).
(i mean 1 sub an 1 speaker rca are good but maybe i wanna amp my front speaker one day)
And how is the touch screen?
How about this new Pumpkin android 6.0 radio https://www.amazon.com/dp/B06Y5TLHJ2
alvinjones377 said:
How about this new Pumpkin android 6.0 radio https://www.amazon.com/dp/B06Y5TLHJ2
Click to expand...
Click to collapse
That price doh and its usa Amazon.
Hello Guys,
iam new here and i need help.
since one Week i have a Dasaita HU with PX5, 4GB RAM, 32GB and it is bulid into my Mitsubishi Lancer with orignal Rockford Fosgate system.
And there is the Problem, how can work the Radio like the OEM Radio with the Rockford System? Maybe here other People with Mitsubishi and Rockford System and they using a Radio like mine?
Hope you can help me, it is a big Problem for me that it not work right
Thank you!
Robert
Is Nobody here with a Mitsubishi and Rockford and an Android Radio?
Nudelsose said:
Is Nobody here with a Mitsubishi and Rockford and an Android Radio?
Click to expand...
Click to collapse
What is the Rockfors....an amplifier? a Subwoofer?
Did it have some RCA inputs?
Hey,
the Rockford Fosgate Systen is a complete OEM Soundsystem from Mitsubishi.
It Contains Speaker in all 4 Doors, in the Front Doors with Tweeters and in the Rear is a Subwoofer.
Did you buy your unit with Canbus decoder?
According to Dasaita, you need the canbus CB001 for models 2007-2013 and CB003 for models 2014-2017
The can bus is needed for Rockford Fosgate System to work with the headunit
You should buy harness with canbus
Ok,
but did you can change the punch of the subwoofer?
I am in a 2013 X and have a Dasaita PX3 unit. Subwoofer controls when you have the canbus box attached are not the sub bar in the Amplifier app but the far left 60hz bar.
Hope that helps.
It's like this one... But Dasaita may have it on their site Hot-Audio.
https://www.google.com/search?q=das...rome-mobile&ie=UTF-8#lbl=OVERVIEW&pie=plaji-i
I have the same issue controlling the subwoofer on the PX6 with outlander and fosgate system. Controlling the sub with 60hz on the eq is hardly a fix as it is just lowering 60hz over all the channels . It would benefit to be able to adjust the sub volume as it seems to be louder than it should be. I am in contact with dasaita so will see what they say.
Sent from my Pixel 3 XL using Tapatalk
Hi
So I have a PX6 from navifly or whatever. Anyway had probs as well, went to a place called audiocity and now it works because(still cant control the sub punch but at least now it does punch) the wiring for the amp behind the radio was wrong. The amp gets its signal from the front speakers and behind the radio the driver side front speaker wiring was wrong. Its supposed to be both the same +/- but one speaker was the other way around and the signals were working against each other rather than working together. I think now you guys mby can try to find that. Now the punch was real gooooooood.
If needed I can do few pics or a video about this.
I cant control the sub that much but I can control the bass still. So it is punching good.
Hi, if it's not a strech for you I would really appreciate some details about this.
My problem is that balance does not work (if I put 100% on rear the volume goes to 0) and most annoying probleme is that I have a bass delay, which means that when the bass should kick in it actually fades in from 0 to whatever...and it takes like 5 seconds to be at the volume it's supposed to be. This i annoying because it does not only happen at the start of the song, but also on the entire track. From factory settings I chose the sound option without amplifier because the other two options (with amplifier and auto detect) don't care about amplifier settings after restart, so choosing a customized present (or rock, classical etc) does not make any sound changes. Any ideas?
Hello, I just installed a new PX5 MTCE MX V.3.32_1. I do not use an additional amplifier. Only use internal one. At first, no sound at all coming from the speakers. After having let my car shut down for one hour, I tested again. Now weak sound from rear speakers but still nothing from front one. Try to play with sound settings. Don't know what I'm doing. Don't seems that sound wants to come out front speakers. Before removing the unit and testing the wires, I would like to know if it has a setting to check.
PS.: My car is a Kia Forte 5 2016.
Tank you for your help.
In Factory Settings, there're 3 sections where you can play with attenuation: the section where you can define the volume level for each audio source (radio, main board, DVD if you have one), the section where the CanBus decoder is defined, and the general / other sections.
Also, make sure you are NOT using RCA connectors but the CANBUS connector. At least on my unit, the RCA outs are NOT amplified.
If all fails, you might have an issue with the amplifier chip. It is easy to replace if you have some soldering skills
Hope this helps
Max
I'm also curious on this problem.
I had a PX5, android 9, 4GB RAM. Right after installing to my Mercedes W203 car, it played well until one day. All the speakers have no sound.
I shut down the car for few hours, factory reset the head unit. After that, the sound come back at normal, except when playing FM radio. The sound for radio only come from right side speakers, no sound from left side speakers. Other apps play normal sound (music, maps, call...)
Please help if you guys have some experience on this problem.
Two years ago I purchased a PX5 Rockchip rk3368, 10.1 inch display, 4gb ram 32 gb ram Octacore Android head unit from Coika (Andoid 8.0). All was good until this morning when she didn’t sound at all. I was try to reinstal the Andoind, purchased from Hal9k, ModInstaller Pro 2. After install Android 10 i hoped the sound will going back but it did not happen. Can somone to help me? Any sugestion is welcome.
P.S.: no beep, no sound on radio, no sound in youtube. no sound at all... I guess the TDA7851 amplifier is problem.
Thanks
Matei Catalin said:
Two years ago I purchased a PX5 Rockchip rk3368, 10.1 inch display, 4gb ram 32 gb ram Octacore Android head unit from Coika (Andoid 8.0). All was good until this morning when she didn’t sound at all. I was try to reinstal the Andoind, purchased from Hal9k, ModInstaller Pro 2. After install Android 10 i hoped the sound will going back but it did not happen. Can somone to help me? Any sugestion is welcome.
P.S.: no beep, no sound on radio, no sound in youtube. no sound at all... I guess the TDA7851 amplifier is problem.
Thanks
Click to expand...
Click to collapse
Probably.
Old post but maybe it will help some other people.
I have px30 VW android HU from ISUDAR, equiped with dsp from factory. About year ago sound stopped working - no beep, no sound at all from speakers. Same situation on rca outputs.
I`ve changed the tda7851L to new one (cut-out old one, desoldered pins, soldered new one) but no luck - still no sound.
While checking the circuit, i discovered that there is only 0,5V on enable pin of the poweramp chip. I left that for almost a year Last week i`ve decided to investigate problem again.
Long story short - there are two line audio drivers (SGM8905). Both of them have enable pins too. One from the pair had partially shorted enable pin (60 ohms), that caused the big voltage drop on enable line, so the amplifier was not able to start. Changed the faulty one and second one too (it was broken too - to small amplification).
Now the sound is back.
Hi, got the same problem after 4 years of working. The sound just stopped working when I started the car. Also my working back camera stopped working. I did not change any wires within this time. I tried a factory reset. Sound and camera still wont work. Checked the fuses all good. Replaced with original stereo I got the sound back so no amp problems. What could be the problem?
Hello folks,
I have a PX6 unit with Android 10 in a VW T5 Multivan, 2007.
Everything except the FM radio worked fine for a few months (very bad reception) but I was happy because I only use navigation and sound over bluetooth from my phone.
One day I got some noice from the speakers as a small warning before a big BOOOM a few seconds later. It is a really loud "discharge" from the speakers and obviously not good for the unit. Feels like a mini thunderstorm inside my car The head unit goes back to normal after the big bang but the noice starts building up again and a few minutes later, the same thing.
After the third BOOOM the amplifier broke and I could no longer hear any sound from apps and bluetooth (FM radio was still working)
I contacted the seller and he sent me a new amplifier. Hard work for me, but I desoldered the old one and replaced it. It worked and I was back to normal for a while.
Today, the big BOOOOM was back.
Any idea what can cause this behavior and how to solve it before I burn my second amp?
TIA,
David
Is it an MTCD device
marchnz said:
Is it an MTCD device
Click to expand...
Click to collapse
Ooops. I remember incorrectly after I double checked. It is an MTCE unit. Which forum is the best for my question?
duelago said:
Ooops. I remember incorrectly after I double checked. It is an MTCE unit. Which forum is the best for my question?
Click to expand...
Click to collapse
You're in the correct forum.
Check speakers / wiring and speaker impedance. If unsure seek advice from reputable local installer