Develop Bugs

[Guide]A much simple way of unbricking and rooting Nitro HD, P930

I know there is a guide already here a long time ago, but Its step is kind of complicated. So, I figure it out another way, no need to set up a HTTP server to trick LG's update software.
I have tested it on V20f, everything works perfect. But remember, whatever you do, you do at your own risk and responsibility for your actions rests solely on you.
Unbricking part:
1. Install LG's cell phone driver, of cause.
2. Install B2CAppSetup.exe from kdz-flash.rar （download）
3. Open test-version-upTest_EX folder, Run Windows Enabler.exe as Administrator‘s authorization and turn it on by single click the icon of windows's tray.
4. Switch the phone to Download mode:
Turn off the phone, if you have not turned off.
Disconnect the USB cable from the phone if connected.
Hold down Volume Up and connect the USB cable to the phone.
Hold Volume Up until the screen: Download mode.
5. Open the folder test-version-upTest_EX and run the program UpTestEX_original.exe
6. Click on the folder icon in the row "Select kdz file" and select the file V20F_00.kdz
7. Click on "CSE web upgrade test".
8. In the window that appears, click on "Upgrade Start".
9. In the next window that appears, you will be prompted to select country and language, which will use the program.
10. The program will begin to flash update file V20F_00.kdz on your phone.
Rooting your P93x:
1.Copy LG_SystemBackupTest.apk from ROOT.rar to your phone's sdcard and intall it, run it.(download)
2.Enable USB debug mode, and connect your phone with computer by usb cable, then run root_P930.bat in your computer, then, let your PC do the rest. then you can get a rooted V20f firmware. alse, this method can root V20e, And maybe other's version firmware can be rooted by it too.

is this works in SU640 korean version?

jeonaztigz said:
is this works in SU640 korean version?
Click to expand...
Click to collapse
Use the guide I link to; it flashes a SU640 KDZ instead of the P93x.
http://forum.xda-developers.com/showthread.php?t=1784709

your files have errors & can not be extracted - can u post different file links that work

kdz-flash have virus
brianlili said:
I know there is a guide already here a long time ago, but Its step is kind of complicated. So, I figure it out another way, no need to set up a HTTP server to trick LG's update software.
I have tested it on V20f, everything works perfect. But remember, whatever you do, you do at your own risk and responsibility for your actions rests solely on you.
Unbricking part:
1. Install LG's cell phone driver, of cause.
2. Install B2CAppSetup.exe from kdz-flash.rar （download）
3. Open test-version-upTest_EX folder, Run Windows Enabler.exe as Administrator‘s authorization and turn it on by single click the icon of windows's tray.
4. Switch the phone to Download mode:
Turn off the phone, if you have not turned off.
Disconnect the USB cable from the phone if connected.
Hold down Volume Up and connect the USB cable to the phone.
Hold Volume Up until the screen: Download mode.
5. Open the folder test-version-upTest_EX and run the program UpTestEX_original.exe
6. Click on the folder icon in the row "Select kdz file" and select the file V20F_00.kdz
7. Click on "CSE web upgrade test".
8. In the window that appears, click on "Upgrade Start".
9. In the next window that appears, you will be prompted to select country and language, which will use the program.
10. The program will begin to flash update file V20F_00.kdz on your phone.
Rooting your P93x:
1.Copy LG_SystemBackupTest.apk from ROOT.rar to your phone's sdcard and intall it, run it.(download)
2.Enable USB debug mode, and connect your phone with computer by usb cable, then run root_P930.bat in your computer, then, let your PC do the rest. then you can get a rooted V20f firmware. alse, this method can root V20e, And maybe other's version firmware can be rooted by it too.
Click to expand...
Click to collapse
The file kdz-flash have virus, can you update that? tvm.

Brick lg g3 After update recovery bump help!

Good evening everyone my name mirko. Help me! I have a problem with my smartphone lg g3 32 Gb italian. I upgraded the recovery bumped .... when I rebooted the screen remains black and there are no signs of life. Do not even enter into download mode. the PC recognizes a sound hardware and wrote LGE Android net usb serial Com Port 7. know a way to help me? thank you

mirko0 said:
Good evening everyone my name mirko. Help me! I have a problem with my smartphone lg g3 32 Gb italian. I upgraded the recovery bumped .... when I rebooted the screen remains black and there are no signs of life. Do not even enter into download mode. the PC recognizes a sound hardware and wrote LGE Android net usb serial Com Port 7. know a way to help me? thank you
Click to expand...
Click to collapse
You have to use unbrick method....find in the forum...also what model you have and what the version of android?

My model is d855 and The android installed is lollipop fw d85520h
Inviato dal mio GT-I9505 utilizzando Tapatalk

1. You need to do is to check the latest version for your phone here by entering your phone's IMEI code.
2. Keep in mind the version and country and download the KDZ file you need.
3. Install LG drivers on your PC.
4. Go to this thread and from the section How to flash ROM KDZ Method start from the 3rd step.
This video shows how to get into Download Mode.
Then you have to root your phone again.
good luck

sharp3r said:
1. You need to do is to check the latest version for your phone here by entering your phone's IMEI code.
2. Keep in mind the version and country and download the KDZ file you need.
3. Install LG drivers on your PC.
4. Go to this thread and from the section How to flash ROM KDZ Method start from the 3rd step.
This video shows how to get into Download Mode.
Then you have to root your phone again.
good luck
Click to expand...
Click to collapse
Ok thanks, but unfortunately the problem of my phone and 'who does not enter the mode' download mode "the screen once connected and hold the volume button is all black and does nothing.
[emoji24] [emoji24]

mirko0 said:
Ok thanks, but unfortunately the problem of my phone and 'who does not enter the mode' download mode "the screen once connected and hold the volume button is all black and does nothing.
[emoji24] [emoji24]
Click to expand...
Click to collapse
You have unbrick your phone with board diag search lg g3 board diag you will find all the procedure and file....if any hekp needed we all are here for helping you....

mirko0 said:
Good evening everyone my name mirko. Help me! I have a problem with my smartphone lg g3 32 Gb italian. I upgraded the recovery bumped .... when I rebooted the screen remains black and there are no signs of life. Do not even enter into download mode. the PC recognizes a sound hardware and wrote LGE Android net usb serial Com Port 7. know a way to help me? thank you
Click to expand...
Click to collapse
Hi, mirko0. We have the same problem and we need to do the same procedures to find the solution.
As seen in the following links:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
http://arena4g.com/forum/threads/unbrick-hard-unbrick-d855.7/ (Brazilian portuguese tutorial)
http://open-freax.fr/guide-unbrick-your-lg-g3/
You'll have to open up your phone (seriously) and make a short circuit in the board. Than, your PC will recognize as Qualcomm 9008.
Do not forget:
Install the x32 or x64 drives
If x64, do not forget to disable drive check
If windows 10, do not forget to reboot in advanced mode and disable drivers check
Everytime the phone reboot, you'll need to make the short circuit. I know, a pain in the ass.
You'll need the MBN folder of the Lollipop or Marshmallow. This is our actual problem
I haven't found the MBN folder of 6.0(v30) or 5.0 (v20), just v10. We'll need those files to proceed.

I finally had to send my phone for repair and I have repaired under warranty, soon expected to return repaired

Unbrick guide for 5T

Is there a OP5T unbrick guide? Or is it the same as the OP5?

nikolajkracht said:
Is there a OP5T unbrick guide? Or is it the same as the OP5?
Click to expand...
Click to collapse
I'd start by looking through this other question thread: https://forum.xda-developers.com/oneplus-5t/help/please-help-hardbricked-oneplus-5t-t3716057

OnePlus 5T unbrick tutorial
Link - http://www.oneplusbbs.com/forum.php?mod=viewthread&tid=3836845&extra=page=1&filter=typeid&typeid=136

would you please bring this tool because he need replay in fourm i cannot all chinese i try to register but i cannot
thankyou

GUIDE FOR UNBRICK ONEPLUS 5T:
This guide will fix all brick problems INCLUDING bootlocked, oem locked. It will fix the "Your device is corrupt and will not boot" problem. It will also works if you flashed the Oneplus 5 phone and ended with a upside-down screen, unusable touch screen.
guide inspired by https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
Use the following file for unbrick (Msmdownloadtool)
https://mega.nz/#!QOJjGYRT!oLL9gRKQF9sE1PcVl241WvMQL-dhBaG24T5-ixo2pzs
It includes a Windows-only flasher and a recent OPS file.
Usage:
- Poweroff your phone (keep the power button for 40 seconds)
- Hold the volume up button for 10 seconds
- Connect USB-C cable
- Open device manager and ensure you have a "Qualcomm 9008 (COM3)" listed in Com ports. I had no driver to install (Windows 10).
- Unrar the 2GB file. It contains no error
- open the "dumpling_43_O.06_171206" folder
- Launch "MsmDownloadTool V4.0.exe"
- Click "Verify"
- Wait for "Md5 Check Ok!"
- Click "Start"
This will completely wide your device (oneplus 5T only !) and reinstall EVERYTHING (OxygenOS 4.7.2). The phone reboots automatically.
It will fix all brick problems.

thank you i will tested
thank you i will test it .

EDIT 2 : The MSM Download Method worked for me! Thanks !
Did it work ?
https://androidfilehost.com/?fid=889964283620773422
If you want to try out the second method! (downloading right now to test it, since my device is unusable after oreo update...)
EDIT : Second method did help a bit but phone is still unconscious. Trying the MSM Download Tool right now

diminou91 said:
EDIT 2 : The MSM Download Method worked for me! Thanks !
Did it work ?
https://androidfilehost.com/?fid=889964283620773422
If you want to try out the second method! (downloading right now to test it, since my device is unusable after oreo update...)
EDIT : Second method did help a bit but phone is still unconscious. Trying the MSM Download Tool right now
Click to expand...
Click to collapse
were u on 128GB or 64GB version?

Bradl79 said:
were u on 128GB or 64GB version?
Click to expand...
Click to collapse
I have the 64GB version of OP5T, but I'm guessing the files are the same since we use the same OOS update. Should work for the 128GB version too

thankyou

Thank yo elwin94 ! It worked like a charm !
Thank A LOT !!!

Doenst work for me, sahara communication fails.

BazzBeater said:
Doenst work for me, sahara communication fails.
Click to expand...
Click to collapse
U need to check ur drivers

what do I do if the QUALCOMM 9008 is not listed?

brendonppagel said:
what do I do if the QUALCOMM 9008 is not listed?
Click to expand...
Click to collapse
make sure the drivers are installed
it should look like below
How To:
Code:
Step 1: Download Driver and Unbricktool
Step 1: Extract Drivers and Recovery Tool files on Desktop.
Step 2: If you are using Windows other than Windows XP,turn off Driver Signature Enforcement.To do so,follow this guide :
http://www.howtogeek.com/167723/how....igned-drivers/
Step 3: Press the power button for 40 seconds to turn off the phone.
Step 4: Press the volume up button for 10 seconds, while connecting the device with the computer.
Step 5: Open your device-manager and make sure in "Unknown devices" is one device with the name "QHUSB_BULK".
Step 6: Right Click on your device in the device manager and select Update Device Software. Choose manually the drivers folder and install the driver.
Step 7: When the device shows as "Qualcomm 9008", go run the MSM Download Tool as administrator.
Step 8: Click start at top left corner and wait for it to finish (green text will come).
Step 9: Disconnect phone from PC and boot into system.

elwin94 said:
GUIDE FOR UNBRICK ONEPLUS 5T:
This guide will fix all brick problems INCLUDING bootlocked, oem locked. It will fix the "Your device is corrupt and will not boot" problem. It will also works if you flashed the Oneplus 5 phone and ended with a upside-down screen, unusable touch screen.
guide inspired by https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
Use the following file for unbrick (Msmdownloadtool)
https://mega.nz/#!QOJjGYRT!oLL9gRKQF9sE1PcVl241WvMQL-dhBaG24T5-ixo2pzs
It includes a Windows-only flasher and a recent OPS file.
Usage:
- Poweroff your phone (keep the power button for 40 seconds)
- Hold the volume up button for 10 seconds
- Connect USB-C cable
- Open device manager and ensure you have a "Qualcomm 9008 (COM3)" listed in Com ports. I had no driver to install (Windows 10).
- Unrar the 2GB file. It contains no error
- open the "dumpling_43_O.06_171206" folder
- Launch "MsmDownloadTool V4.0.exe"
- Click "Verify"
- Wait for "Md5 Check Ok!"
- Click "Start"
This will completely wide your device (oneplus 5T only !) and reinstall EVERYTHING (OxygenOS 4.7.2). The phone reboots automatically.
It will fix all brick problems.
Click to expand...
Click to collapse
I can't thank you enough! You saved my ass today good sir!!

Bradl79 said:
make sure the drivers are installed
it should look like below
How To:
Code:
Step 1: Download Driver and Unbricktool
Step 1: Extract Drivers and Recovery Tool files on Desktop.
Step 2: If you are using Windows other than Windows XP,turn off Driver Signature Enforcement.To do so,follow this guide :
http://www.howtogeek.com/167723/how....igned-drivers/
Step 3: Press the power button for 40 seconds to turn off the phone.
Step 4: Press the volume up button for 10 seconds, while connecting the device with the computer.
Step 5: Open your device-manager and make sure in "Unknown devices" is one device with the name "QHUSB_BULK".
Step 6: Right Click on your device in the device manager and select Update Device Software. Choose manually the drivers folder and install the driver.
Step 7: When the device shows as "Qualcomm 9008", go run the MSM Download Tool as administrator.
Step 8: Click start at top left corner and wait for it to finish (green text will come).
Step 9: Disconnect phone from PC and boot into system.
Click to expand...
Click to collapse
does your phone goes in fastboot mode, or this is not really for those devices which are not really dead but just want to restore it

dryspuri said:
does your phone goes in fastboot mode, or this is not really for those devices which are not really dead but just want to restore it
Click to expand...
Click to collapse
this is for if u cannot go into fastboot mode or if u cannot load ur OS through fastboot, if u are in fastboot mode the qualcomm driver will not show up, u have to power ur phone off completely and hold the vol up button for 10 sec, then plug in ur cable, ur screen will still stay black and u will see the qualcomm driver show up, then u will open the msm tool

Thanks that did the trick.
Sent from my BKL-L09 using Tapatalk

Hi! friends, can someone help me please, some of you have a download link that is not MEGA?

Manually Update US Retail Moto G7 Power to May 1st Security Update.

Update: 2nd post now has a way to update the Moto G7 without erasing user data. Method uses most of this tutorial but now you unzip image and select a file within in the unzipped image. Either way still backup your phone just in case. User MrCamby let me know about the "Lenovo MOTO Smart Assistant" for backup.
Yesterday I updated my US Retail version Moto G7 Power to the newest firmware build# PPO29.114-108 with the May 1st Security update manually. My previous build with the March 1st security update was PPO29.114-63-2. I have the Retail US Model with 3GB of RAM and 32GB of Storage. DO NOT flash the Moto G7 Power international version with 4gb RAM and 64GB storage, it will probably brick it.
This process will delete everything on the phone as it flashes all the phone's partitions. The phone will be as it was when you first bought it having to re-enter your account info and download all your extra apps not included with the stock phone. Please backup everything if you decide to update the phone using this method. On my phone most things were stored on the cloud but I did forget I had some unimportant things on the phones download folder.
Thanks to user MrCamby for letting me know bout the "Lenovo MOTO Smart Assistant" which will backup the phone on your PC (Windows only) before you flash it. I haven't personally used it but from it's .pdf guide it will backup your phone before you flash it preserving images, SMS, Contacts, etc... Link to Lenovo Moto Smart Assistant
https://support.lenovo.com/us/en/downloads/ds101291
The first step is to download Motorola RSDLite6.2.4.zip software used to flash the firmware file.
The software is available at: https://mirrors.lolinet.com/software/windows/Motorola/RSDLite/6.2.4/
Unzip and Install the RSDLite software and move to step 2.
Step 2 is to download and install the MotorolaDeviceManager_2.5.4.exe Software/Drivers at:
https://mirrors.lolinet.com/software/windows/Motorola/Drivers/
Step 3 is to download the 1.9GB firmware. Be sure the file downloads completely! Flashing an incomplete image could damage the phone. The MD5 checksum is 8bb8f13ec0fe23c977b57c86f2033db9 MD5 Checker attached.
Choose the Firmware dated 2019-06-05 and Named:
XT1955-5_OCEAN_RETUS_9.0_PPO29.114-108_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
https://mirrors.lolinet.com/firmware/moto/ocean/official/RETUS/
With the two pieces of software installed and the firmware downloaded it's time to install the firmware.
Warning this process will completely erase your device and reinstall the new firmware. only attempt this
process if you have a US Retail G7 Power with 3GB RAM and 32GB of storage. Do not interrupt the process
once the flashing has begun or you may have a brick(dead phone). Please continue at your own risk.
1) You'll need a USB C cable and be sure the computer is plugged in to power if a laptop. The phone should have at least a 60% charge.
2) Shut off the phone. Once the phone is completely off, Hold the volume down and press the power button still holding the volume down button.
3) The phone should boot into the boot loader mode, release the power & down volume button. See bootloader.jpg attached to see what screen looks like.
4) Plug the USB C cable into the phone and into a USB 2.0 port(black colored) on your computer. On my computer the phone didn't show up in RSDLite program when plugged into a blue colored USB 3.0 port. Others online reported the same problem.
5) Launch the RSDLite program and click show device. (Figure_1 Picture attached to post)
6) If everything went right you should see your phone listed on line 1. The program doesn't list any specific info just that a device is connected. See Figure_1 Picture attached to post.
7) Click the box on the top and select the firmware image still zipped. (The RSDLite program will unzip the firmware) and then click on the start button. See Figure_2 picture attached to post for box to load firmware and start button.
8) This is your last chance to not ERASE your phone and load the new firmware. After clicking start in last step a menu will pop up with three options. Choose the middle option "Uncompress and Start Flashing" See Figure_3.jpg attched to the post. During the firmware flash DO Not unplug your phone or allow your laptop to sleep. The process took about ten to fifteen minutes. The program will update the files it's flashing i.e. flashing 1 of 32, 2 of 32, etc....
9) When the flashing is done RSDLite will reboot the phone and you'll be prompted to choose your language like a new phone.
Troubleshooting: If line 1 in the RSDLite program is blank after plugging in the phone and doesn't show a device then you'll need to try a different USB port on your computer. For some reason the phone only shows up on my black colored USB 2.0 ports and not my blue colored USB 3.0 ports. Also try a different USB cable if it doesn't show up. These are common issues with the RSDLite program from my research.

Update Moto G7 Power without erasing device.
Follow the steps in the post above but stop at step 6 and start here.
7) Unzip the firmware image you downloaded in a folder you create.
8) Open the RSDLite program and click the box on the top and then select servicefile.xml in the folder you created in step 7.
9) After selecting the servicefile.xml click start and flash your phone. This should not erase your data.
10) Some forums reported it is better to erase the phone per the top posts but no reason was given.
Update Moto G7 Power without using RSDLite.
Since some people have reported trouble getting to RSDLite to work so I decided to do it in a way similar to the way I updated my Pixel using Android Platform Tools.
1) Create a folder where everything will be kept. like a folder called android in C:\ like C:\android
2) Download the Android Platform Tools attached to this post and extract to the folder you created.
3) Download the Phone firmware in top post and UNZIP into the same folder you created with platform tools in it.
4) Download update_batfile.zip attached to this post and unzip into the folder you created with the phone firmware and Android Platform Tools in it.
5) Open a Windows command prompt in Start menu--> windows system or by holding the windows key + R and typing CMD.
6) Plug your phone into the laptop and go to Settings--> System-->Advanced-->Developer Options then toggle "USB debugging" to on. A screen should appear on the phone "Allow USB Debugging" press OK.
7) If you don't have developer options in your System-->advanced go to System--> about and tap the build number 7 times. Now try step 6 again. Developer options should be there.
8) Navigate to the C:\android folder you created or whatever folder you created with all the files in the Command Prompt. Something like cd \android
9) Turn off the phone, Once the phone is off, hold the volume down and then hold the power button. You should boot into the bootloader screen. Release the two buttons.
10) So you should have the phone in bootloader mode, all the files in one folder, have previously selected USB debugging when the phone was booted up, and the command prompt at the folder with all the files in it.
11) now type in the command prompt type either update_no_erase.bat or eraseandupdate.bat Obviously the update_no_erase.bat updates the phone without erasing it and eraseandupdate.bat erases the phone and then updates it. After typing the one of the two .bat filenames press enter and the .bat file will update the phone and then reboot it.
12) Good luck!

Man I was wondering why nobody was updated yet since that firmware has been available for a while.. I flashed it about last week or less all good..
Man I forgot about RDS Lite damn it.. . I flashed it manually and was PITA since it has Patition A and B and a few times I messed up the commands and installed parts of partition B on partition A since everything installs by default to Partition A unless you specify System_b because I forgot to specify the partition..
T

I weird thing about this May 1 lst Firmware and the one before after unlocking bootloader, in system updates it stated that my device is compromised so no more Ota but today out of nowhere that message changed back to normal System Up to date. So weird I did nothing at all.

I knew there had to be a way a way to find that updated firmware. I just been too distracted having fun with a rooted phone finally to research it yet (my last 2 phones were sm-j727t-1's and before that some kyocera pos... I make bad decisions lol). so i take it we will have to reroot our devices after this as well...? we should be able to get all our other stuff back nearly identical using titanium with cloud storage though right? just slightly more of a headache than twrp...

You will definitely have to Re-Root the phone as this flashes all the partitions like it was when new. You may have to Unlock the bootloader again but I'm not sure about that. The bootloader may stay unlocked because that's a deeper setting I believe. With my Pixel 2 I would always have to Re-Root whenever I updated but that wasn't to difficult. If you do update report back on if the bootloader stayed unlock or not. You should be able to still unlock the bootloader again if it did lock, but again I don't think it will lock. You will be able to get everything back that's cloud based as you sign in with your google account. It will take a little time to reinstall some apps and change a few settings depending on how your phone is set up. I couldn't get the May 1st Security / phone fixes from system update so I went this route.
thaessential said:
I knew there had to be a way a way to find that updated firmware. I just been too distracted having fun with a rooted phone finally to research it yet (my last 2 phones were sm-j727t-1's and before that some kyocera pos... I make bad decisions lol). so i take it we will have to reroot our devices after this as well...? we should be able to get all our other stuff back nearly identical using titanium with cloud storage though right? just slightly more of a headache than twrp...
Click to expand...
Click to collapse

My PC ports are all 2.0 and RDSLite do not recognize the device. I belive is the other way around (Need 3.0 Ports) because of that.

nucher said:
You will definitely have to Re-Root the phone as this flashes all the partitions like it was when new. You may have to Unlock the bootloader again but I'm not sure about that. The bootloader may stay unlocked because that's a deeper setting I believe. With my Pixel 2 I would always have to Re-Root whenever I updated but that wasn't to difficult. If you do update report back on if the bootloader stayed unlock or not. You should be able to still unlock the bootloader again if it did lock, but again I don't think it will lock. You will be able to get everything back that's cloud based as you sign in with your google account. It will take a little time to reinstall some apps and change a few settings depending on how your phone is set up. I couldn't get the May 1st Security / phone fixes from system update so I went this route.
Click to expand...
Click to collapse
yeah I'm definitely getting it done soon. these unsuccessful update warnings are super annoying. i keep trying to hide more google and moto apps and some other things but nothing seems to have any effect

I know on my Lenovo Thinkpad the USB 3.0 ports would not recognize the phone in RSDLite. I tried switching between 3.0 and 2.0 and it would only show up in the 2.0 ports. Be sure to install the MotorolaDeviceManager_2.5.4.exe listed in the thread and the phone will only be recognized when it's in the bootloader mode (power on holding volume down button). I had trouble initially getting RSDLite to see the phone and in a few forums people reported trying a different USB C cable and using the 2.0 USB ports. For me it was using the 2.0 ports. Getting RSDLite to see the phone can be the most difficult part of the whole operation. Good Luck!
Omar04 said:
My PC ports are all 2.0 and RDSLite do not recognize the device. I belive is the other way around (Need 3.0 Ports) because of that.
Click to expand...
Click to collapse

nucher said:
I know on my Lenovo Thinkpad the USB 3.0 ports would not recognize the phone in RSDLite. I tried switching between 3.0 and 2.0 and it would only show up in the 2.0 ports. Be sure to install the MotorolaDeviceManager_2.5.4.exe listed in the thread and the phone will only be recognized when it's in the bootloader mode (power on holding volume down button). I had trouble initially getting RSDLite to see the phone and in a few forums people reported trying a different USB C cable and using the 2.0 USB ports. For me it was using the 2.0 ports. Getting RSDLite to see the phone can be the most difficult part of the whole operation. Good Luck!
Click to expand...
Click to collapse
Yes I know that. Thanks anyway I been playing this game since Android 2.2 ? In my case are the ports 95% sure about it.

all my ports are also 2.0 and i couldn't get my phone to show up in RSDlite. probably just wait for TWRP at this point

thaessential said:
all my ports are also 2.0 and i couldn't get my phone to show up in RSDlite. probably just wait for TWRP at this point
Click to expand...
Click to collapse
Yeah man I test it in several laptops only being recognized on 3.0 Ports. Because of "USB Type C"

Manually flash the firmware through terminal and fastboot. That will fix the issue!

Rondeau79 said:
Manually flash the firmware through terminal and fastboot. That will fix the issue!
Click to expand...
Click to collapse
I been doing it for years manually no problems. I just wanted to try RSDlite once again has been years I have not use it. Still same issues as always ?

I was aware of the fastboot method but I figured this would be easier for some people who didn't want to install Android Tools Package and deal with the typing or copying fastboot commands in a terminal. Using RSDLite is a simple and foolproof method of updating our phones. I didn't have much trouble getting RSDLite to work but but it seems like others are. Once you have RSDLite working updating your phone would take less than a minute. I plan on updating my phone each time Motorola issues a System update. My phone doesn't receive them in a timely matter because I'm on Verizon who tends to postpone System updates.
Omar04 said:
I been doing it for years manually no problems. I just wanted to try RSDlite once again has been years I have not use it. Still same issues as always
Click to expand...
Click to collapse

FYI: Before you flash the update, you can use the Lenovo assistant to do a backup of your phone. Then you can restore from backup after the firmware flash.
Sent from my moto g(7) power using Tapatalk

Good to know. I'm new to the Motorola / Lenovo ecosystem. I've had Nexus and Pixels for the last 4 years. I'll add a link to the Lenovo Moto Smart Assistant Software in the main thread. Thanks!
MrCamby said:
FYI: Before you flash the update, you can use the Lenovo assistant to do a backup of your phone. Then you can restore from backup after the firmware flash.
Sent from my moto g(7) power using Tapatalk
Click to expand...
Click to collapse

nucher said:
I was aware of the fastboot method but I figured this would be easier for some people who didn't want to install Android Tools Package and deal with the typing or copying fastboot commands in a terminal. Using RSDLite is a simple and foolproof method of updating our phones. I didn't have much trouble getting RSDLite to work but but it seems like others are. Once you have RSDLite working updating your phone would take less than a minute. I plan on updating my phone each time Motorola issues a System update. My phone doesn't receive them in a timely matter because I'm on Verizon who tends to postpone System updates.
Click to expand...
Click to collapse
Agree with you 100% RDSLite awesome once you have it up and running but a PITA to the power of 10 when not. I usually don't type any command at all I just open notelad write all commands there save as bat and then open cmd in working folder fastboot devices to make sure device is connected and drag and drop the bat to the cmd window hit enter to star and it does all the job automatically. ?

My 2nd post below the top will be a .bat file to use with ADB tools. Basically put the unzipped firmware, .bat file, and the adb tools all in one folder and run the .bat file. I just finished testing it now to type the post up.....
2nd Post is up now....
Omar04 said:
Agree with you 100% RDSLite awesome once you have it up and running but a PITA to the power of 10 when not. I usually don't type any command at all I just open notelad write all commands there save as bat and then open cmd in working folder fastboot devices to make sure device is connected and drag and drop the bat to the cmd window hit enter to star and it does all the job automatically.
Click to expand...
Click to collapse

so i noticed there are also linux and mac versions of rsdlite. i have a linux pc running debian 10. was gonna try stuff out on that and see if i get different results. personally when it comes to stuff like this i would much prefer to use gui software than term. i only have one phone... well that's not quite true... i only have one new phone lol

Wanbo X1 Pro Android 9 Projector

Guys please can someone help me i have a WANBO X1 PRO Android .... was working fine until i downloaded a firmware from this site https://wanbo.in/x1pro-firmware/ plugged in the drive hold 10 sec power finished update 100% rebooted but now i get no image at all ??? just black screen.... what can i do ... i attach my model... Nevermind fixed my contacting support and they send me this latest official firmware for Wanbo X1 Pro Androic 9
https://exmail.qq.com/cgi-bin/ftnEx...c2382996ad396&from=wedrive&t=exs_ftn_download
instructions
The projector is powered off, unplugged, then download the firmware on the computer, decompress and move the 5 files to the root directory of the U disk in the format FAT32, then plug it into the machine, and then connect the power supply, and the machine will automatically update
Note: You need to strictly follow the upgrade method to upgrade. The firmware type, firmware format, firmware content, or upgrade method cannot be changed. The five files need to be placed in the root directory of the U disk (the root directory is opened on this computer after the U disk is connected, and the root directory is after clicking the U disk to open). The format of the U disk must be FAT32 format (U disk connected to the computer, open this computer, find the icon of the U disk. Right-click and select Properties to view them). To upgrade, you need to power off the projector first, connect the U disk and then connect the power supply to operate

Nevermind fixed by contacting wanbo support and they send me this latest official firmware for Wanbo X1 Pro Android 9
https://exmail.qq.com/cgi-bin/ftnEx...c2382996ad396&from=wedrive&t=exs_ftn_download
instructions
The projector is powered off, unplugged, then download the firmware on the computer, decompress and move the 5 files to the root directory of the U disk in the format FAT32, then plug it into the machine, and then connect the power supply, and the machine will automatically update
Note: You need to strictly follow the upgrade method to upgrade. The firmware type, firmware format, firmware content, or upgrade method cannot be changed. The five files need to be placed in the root directory of the U disk (the root directory is opened on this computer after the U disk is connected, and the root directory is after clicking the U disk to open). The format of the U disk must be FAT32 format (U disk connected to the computer, open this computer, find the icon of the U disk. Right-click and select Properties to view them). To upgrade, you need to power off the projector first, connect the U disk and then connect the power supply to operate

Comrades! We need your help! After the firmware - there is no picture as in this post! I tried this tailoring - it didn't help! I tried the firmware from the 4pda forum - it didn't help! I wrote to technical support - it didn't help! Does anyone have any proshiki? I am counting on you very much!

the same question as Kosten5555, technical support does not answer!!!

This is a file from my support, maybe it will help you?!
微盘

ecchiwarf !! Thanks, just after this file the projector does not work!!!

Rodius82 said:
Guys please can someone help me i have a WANBO X1 PRO Android .... was working fine until i downloaded a firmware from this site https://wanbo.in/x1pro-firmware/ plugged in the drive hold 10 sec power finished update 100% rebooted but now i get no image at all ??? just black screen.... what can i do ... i attach my model... Nevermind fixed my contacting support and they send me this latest official firmware for Wanbo X1 Pro Androic 9
https://exmail.qq.com/cgi-bin/ftnEx...c2382996ad396&from=wedrive&t=exs_ftn_download
instructions
The projector is powered off, unplugged, then download the firmware on the computer, decompress and move the 5 files to the root directory of the U disk in the format FAT32, then plug it into the machine, and then connect the power supply, and the machine will automatically update
Note: You need to strictly follow the upgrade method to upgrade. The firmware type, firmware format, firmware content, or upgrade method cannot be changed. The five files need to be placed in the root directory of the U disk (the root directory is opened on this computer after the U disk is connected, and the root directory is after clicking the U disk to open). The format of the U disk must be FAT32 format (U disk connected to the computer, open this computer, find the icon of the U disk. Right-click and select Properties to view them). To upgrade, you need to power off the projector first, connect the U disk and then connect the power supply to operate
Click to expand...
Click to collapse
Hello, I have this projector for repair. The problem was that it turned on for 10 seconds and then turned off. I downloaded the firmware from the official website and installed it according to the instructions, but now it doesn't turn off, although there is no image. I want to try installing the firmware that the tech support sent me, but the file storage period has expired. If you have the file, can you please re-upload it to Google Drive or wherever is convenient