Related
Hi at all,I have at home a Nokia ad-10E charger, but I never use it with my new gs3 because in output it has 1200 mAh,200 more that the default Samsung's charger.someone have tried some charger with more than 1000 mAh? It's dangerous for the battery?
Inviato dal mio GT-I9305 con Tapatalk 2
Ansem said:
Hi at all,I have at home a Nokia ad-10E charger, but I never use it with my new gs3 because in output it has 1200 mAh,200 more that the default Samsung's charger.someone have tried some charger with more than 1000 mAh? It's dangerous for the battery?
Inviato dal mio GT-I9305 con Tapatalk 2
Click to expand...
Click to collapse
Yes you can use it properly with the S3,it should charge as fast as the original one if not faster.
It shouldn't be dangerous,so don't worry.
Also if you want to use the full potential of this charger use perseus kernel with fast charge at 1200mAh...
thanks so charge the battery with more than 1000mAh don't reduce the numver of charge before that the battery die?
Not much of an input, but I will say I used one of these on my S3 for 6 months with no problem so far (although i've just upgraded to the Anker battery)!
---------- Post added at 11:14 PM ---------- Previous post was at 11:09 PM ----------
nfsmw_gr said:
Yes you can use it properly with the S3,it should charge as fast as the original one if not faster.
It shouldn't be dangerous,so don't worry.
Also if you want to use the full potential of this charger use perseus kernel with fast charge at 1200mAh...
Click to expand...
Click to collapse
Gahhh, of course! I didn't even think to change that setting in my kernel! Thank you, this should make a difference!
Ansem said:
Hi at all,I have at home a Nokia ad-10E charger, but I never use it with my new gs3 because in output it has 1200 mAh,200 more that the default Samsung's charger.someone have tried some charger with more than 1000 mAh? It's dangerous for the battery?
Inviato dal mio GT-I9305 con Tapatalk 2
Click to expand...
Click to collapse
I'm currently using the 1500mAh charger from a Sony Xperia T and have no trouble at all.
Installed Siyah Kernel and bumped the AC charge to 1200mA and charging is lovely and quick. Nothing gets hot, no problems. It's become my everyday charger and my official S3 one has been downgraded to my emergency travel charger. :good:
MSRemmert said:
I'm currently using the 1500mAh charger from a Sony Xperia T and have no trouble at all.
Installed Siyah Kernel and bumped the AC charge to 1200mA and charging is lovely and quick. Nothing gets hot, no problems. It's become my everyday charger and my official S3 one has been downgraded to my emergency travel charger. :good:
Click to expand...
Click to collapse
thanks to all now i can use it whitout fear
My phone started behaving very weirdly since yesterday. It won't charge with any charger, except the Samsung charger from my tablet. I've cheched the ratings, and the original charger is rated at 850 mA, while the Samsung one is at 2 A. It can't be that the charger is broken, because I've tried with an identical one which I know it's working and it's still not charging. Charging off the USB port works. What could be the problem? Is it related to the kernel or the ROM I'm using? I'm on Lupus JB v10 and Slim Bean 4.01 (the one modified by besttt).
Anyone?
Vic. said:
Anyone?
Click to expand...
Click to collapse
you can try with full wipe first, and test
rod555 said:
you can try with full wipe first, and test
Click to expand...
Click to collapse
Nope, still not charging.
Vic. said:
Nope, still not charging.
Click to expand...
Click to collapse
with other kernel & rom same?
rod555 said:
with other kernel & rom same?
Click to expand...
Click to collapse
Yeah, it's the same.
Discharge battery to zero and recharge
rod555 said:
Discharge battery to zero and recharge
Click to expand...
Click to collapse
You mean to charge with the charger that works or the original one? I've tried charging with the phone off too, still no luck.
Vic. said:
You mean to charge with the charger that works or the original one? I've tried charging with the phone off too, still no luck.
Click to expand...
Click to collapse
with charger that work
So is it really qick-charging?
matwaking said:
We all are waiting for Yureka("when 13 Jan will come....")
I digged about it chipset and it is indeed impressing(ain't it).
It feature one of the FIRST 64 bit cpu(seems to be upcoming future).
I went to official Qualcomm site and it says it features QuickCharge tech, now I wonder which we will be getting??
QuickCharge 1.0 or 2.0 .As I think it is launched in competition with the One+ one (some may disagree but I think so).
So maybe it will support 2.0,then we are getting more lucky.
one more thing regarding hardware,I should not worry about the OTG support right.It should be supported.
As for the software part,as we all know CM is the ruler in customs android,if we got Cm then we will be getting a line of custom roms a later on
One thing that can be and is speculated is build quality,we will see when it is in our hands,they should make a good device as it is a first device under a new Brand.
So guys leave your previous comments on its QuickCharge feature.What you think we will be getting??
Click to expand...
Click to collapse
Hey guys we have quick charge 2.0 In our Yu Yureka Phone ok .But We need 3amp charger like Motorola’s Turbo Charger and HTC Rapid Charger
Quick Charge 2.0 is built in to all of Qualcomm’s latest SoCs, meaning that most of us should be able to benefit from faster recharge speeds. However, can you expect such impressive sounding battery charge times in all situations
Here is the link for quick charge 2.0 confirm and official snapdragon announcement
http://www.androidauthority.com/quick-charge-explained-563838/
*
Should not it be provided with the phone accessories mate, I think it should be.
matwaking said:
Should not it be provided with the phone accessories mate, I think it should be.
Click to expand...
Click to collapse
What you think
Here is the link
Quick Charge 2.0 Certified Accessories List
https://www.qualcomm.com/products/snapdragon/quick-charge
ela1103 said:
What you think
Here is the link
Quick Charge 2.0 Certified Accessories List
https://www.qualcomm.com/products/snapdragon/quick-charge
Click to expand...
Click to collapse
Yeah they can add one more Yu Supercharge.:good:
I think the charger which comes with YU is a 1-amp one..Will it suffice ?
Mr. Kaz said:
I think the charger which comes with YU is a 1-amp one..Will it suffice ?
Click to expand...
Click to collapse
No it wont,we need a certified 2.0 charger.
Its not even sure if Yu gonna provide 2.0
ela1103 said:
Hey guys we have quick charge 2.0 In our Yu Yureka Phone ok .But We need 3amp charger like Motorola’s Turbo Charger and HTC Rapid Charger
Quick Charge 2.0 is built in to all of Qualcomm’s latest SoCs, meaning that most of us should be able to benefit from faster recharge speeds. However, can you expect such impressive sounding battery charge times in all situations
Here is the link for quick charge 2.0 confirm and official snapdragon announcement
http://www.androidauthority.com/quick-charge-explained-563838/
*
Click to expand...
Click to collapse
Wtf OP???.. Check this out.. Not genuine I guess as the photo which is provided is of Samsung.. But just check it out..
Link - http://www.amazon.com/gp/aw/d/9713011333/ref=redir_mdp_mobile/182-9348941-6422568
Does our battery support quick charge function?
arjunsingh1000 said:
Wtf OP???.. Check this out.. Not genuine I guess as the photo which is provided is of Samsung.. But just check it out..
Link - http://www.amazon.com/gp/aw/d/9713011333/ref=redir_mdp_mobile/182-9348941-6422568
Click to expand...
Click to collapse
QuickCharge at 1A,lol
its just another random charger,as i said earlier we need a certified on that can out upto 2-3A
ujilraj said:
Does our battery support quick charge function?
Click to expand...
Click to collapse
thers no official info about it,but SoC supports it as said by Qualcomm,just need someone to get a quickcharger and test with yureka.
ujilraj said:
Does our battery support quick charge function?
Click to expand...
Click to collapse
The battery may explode, get heated, reduced life. The battery in yureka is somewhat cheap one. I think something has to be done from software side also, like unlocking the QC.
vishaletm said:
The battery may explode, get heated, reduced life. The battery in yureka is somewhat cheap one. I think something has to be done from software side also, like unlocking the QC.
Click to expand...
Click to collapse
yes thats why one has to be guinea pig lol
Did anybody try?
matwaking said:
yes thats why one has to be guinea pig lol
Click to expand...
Click to collapse
lol.
Dont go for quick charge but at least did anybody try charging with 2A or 2.1 A chargers and was the charging time reduced?
amit.swain said:
lol.
Dont go for quick charge but at least did anybody try charging with 2A or 2.1 A chargers and was the charging time reduced?
Click to expand...
Click to collapse
max i have is 1.5A charger for sony z ultra,and yes it increases the speed,rest i dont know mate
my charging time is greatly reduced (about 1.30 hr)
I have used some custom kernel and adjusted the charging current level to 1.5 Amp
So quick charge 1.0 is happening
My phone is getting charged 30% in 30minutes and
70% in 60 minutes.
Note: I am using my old lumia charger 5v 1.3 Amps.
KingNorth111 said:
I have used some custom kernel and adjusted the charging current level to 1.5 Amp
So quick charge 1.0 is happening
My phone is getting charged 30% in 30minutes and
70% in 60 minutes.
Note: I am using my old lumia charger 5v 1.3 Amps.
Click to expand...
Click to collapse
Which custom kernel did u use
Sent from my YU5510 using Tapatalk
amit.swain said:
lol.
Dont go for quick charge but at least did anybody try charging with 2A or 2.1 A chargers and was the charging time reduced?
Click to expand...
Click to collapse
I have 2 amp charger ... I will try tomorrow and let you know.
Used 2 amp charges and it took about 2 hours and 15 minutes to get the battery fully charged.
I am running official plane CM12.1 on my phone with no custom kernel or anything else.
hypergamer1231 said:
Which custom kernel did u use
Sent from my YU5510 using Tapatalk
Click to expand...
Click to collapse
Lightning kernel
If it dose support please let me know if anyone using the fast charger with the above model,whic brand and how much it reduces the charging time...thanx
Sent from my ONEPLUS A3003 using Tapatalk
tommy2601 said:
If it dose support please let me know if anyone using the fast charger with the above model,whic brand and how much it reduces the charging time...thanx
Click to expand...
Click to collapse
Hey yes supports quick charge 3.0 from Qualcomm. I bought a charger from tronsmart wc1t from aliexpress 14 euros . But from 1% to reach to 100% wants 2 hours. Maybe because the battery is too large. But it's slow charging ...
StonebridgeGr said:
Hey yes supports quick charge 3.0 from Qualcomm. I bought a charger from tronsmart wc1t from aliexpress 14 euros . But from 1% to reach to 100% wants 2 hours. Maybe because the battery is too large. But it's slow charging ...
Click to expand...
Click to collapse
Thanx
Sent from my ONEPLUS A3003 using Tapatalk
My zuk z2 is charging on 2486 mA..via stock charger on AEX rom. Is it any sort of fast charging?....Because it usually charges on 1500 mA.
Screenshot
Sry unable to attach screenshot....actually new here
Nishant Nimbster said:
My zuk z2 is charging on 2486 mA..via stock charger on AEX rom. Is it any sort of fast charging?....Because it usually charges on 1500 mA.
Click to expand...
Click to collapse
My ether but only if I I'm not working with it.and I'll take it from the charger.
I don't know if this is quick charge I think yes but the prise from the beginning was lower from the others with the same specs, so if we miss something, it's ok for me.
Nishant Nimbster said:
My zuk z2 is charging on 2486 mA..via stock charger on AEX rom. Is it any sort of fast charging?....Because it usually charges on 1500 mA.
Click to expand...
Click to collapse
Which Kernel and ROM?
Aex 4.5 stock official
Aex 4.5 stock official
d3vyarth said:
Which Kernel and ROM?
Click to expand...
Click to collapse
Aex 4.5 stock....default kernal
Mine too does this but only if the screen is off. If i turn screen on then after few seconds it goes back to around 1500mah charging speed
Ni9e. said:
Mine too does this but only if the screen is off. If i turn screen on then after few seconds it goes back to around 1500mah charging speed
Click to expand...
Click to collapse
Ya same with me
Nishant Nimbster said:
Aex 4.5 stock official
Click to expand...
Click to collapse
Its 2486A with 4.3V i.e approximately 10W power. Our default charger supplies 10W power (2A with 5V) so its just normal charge rate.
hp5942 said:
Its 2486A with 4.3V i.e approximately 10W power. Our default charger supplies 10W power (2A with 5V) so its just normal charge rate.
Click to expand...
Click to collapse
Ya ...thankyou
hp5942 said:
Its 2486A with 4.3V i.e approximately 10W power. Our default charger supplies 10W power (2A with 5V) so its just normal charge rate.
Click to expand...
Click to collapse
Well actually, my Z2 charges @ 1.5A 4.5V = 6.75 Watts. But with heliox kernel its 2.5A 4.3V = 10+(approx). It's some sort of fast charge, we can clearly see
Nishant Nimbster said:
Aex 4.5 stock....default kernal
Click to expand...
Click to collapse
Send screenshot of ur kernel version
d3vyarth said:
Well actually, my Z2 charges @ 1.5A 4.5V = 6.75 Watts. But with heliox kernel its 2.5A 4.3V = 10+(approx). It's some sort of fast charge, we can clearly see
Click to expand...
Click to collapse
2.5A x 4.3V = 10.75 W. 0.75W doesn't make that fast charge, it may be error in calculation
hp5942 said:
2.5A x 4.3V = 10.75 W. 0.75W doesn't make that fast charge, it may be error in calculation
Click to expand...
Click to collapse
We get around 4.3V on both kernel but current, it's 1500mA and 2500mA. Obviously 2500mA is faster.