Code:
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Known issues
VoLTE
Recommendations
TWRP (twrp-3.2.1-0-20180309-codeworkx-cheeseburger.img)
OxygenOS Open Beta 5 firmware
Magisk v16.1
Installation
Flash TWRP from Recommendations section
Wipe your device through TWRP
Flash firmware from Recommendations section
Flash ROM
Flash Open Gapps for 8.1
Wipe Dalvik/ART cache and Cache in TWRP
Boot and complete Android setup
Flash Magisk from Recommendations section
Boot your device again
Updating
Make a backup
In case there is a new TWRP version in the Recommendations section, flash it
In case there is a new firmware in the Recommendations section, flash it
Flash ROM
Flash Magisk from Recommendations section
Wipe Dalvik/ART cache and Cache in TWRP
Boot
Download
You can find a new nightly every day (including a changelog) here
Source
Manifest
Donating
My nightly build server and download server have it's costs, feel free to donate me.
Click here to donate.
Credits
Amartinz
Codeworkx
Jumoog
Valahd
The whole LineageOS team
another LOS 15 ?!
Is volte working? I think no other oreo rom has it working right now
julk13 said:
another LOS 15 ?!
Click to expand...
Click to collapse
The other LOS 15 thread is temporarily closed. Why not a new one? Even for now.
Yousvel said:
The other LOS 15 thread is temporarily closed. Why not a new one? Even for now.
Click to expand...
Click to collapse
ok. Thanks. Is /data mounting working
julk13 said:
ok. Thanks. Is /data mounting working
Click to expand...
Click to collapse
Actually, I have not flashed it, so I don't know. I hope someone else can confirm.
Here we go
Enviado desde mi ONEPLUS A5000 mediante Tapatalk
i will try
tried dirty flash over older build. But my op didn't boot...
julk13 said:
tried dirty flash over older build. But my op didn't boot...
Click to expand...
Click to collapse
wipe your device if you are coming from a different ROM
Sent from my ONEPLUS A5000 using Tapatalk
koenkk said:
wipe your device if you are coming from a different ROM
Sent from my ONEPLUS A5000 using Tapatalk
Click to expand...
Click to collapse
Sorry wrong thread.
Is this rom encrypted or decrypted? Do you need to flash no verity?
No download link?
---------- Post added at 05:38 PM ---------- Previous post was at 05:28 PM ----------
I'm a dumbass... Found it.
Twrp not reading sd card?
Bigs1985 said:
Twrp not reading sd card?
Click to expand...
Click to collapse
are you encrypted?
obol2 said:
are you encrypted?
Click to expand...
Click to collapse
I am. I tried formatting via twrp but it didn't decrypt. Ron is working just can't flash anything via twrp. Help!
Should I be encrypted or decrypted?
philipp21897 said:
Should I be encrypted or decrypted?
Click to expand...
Click to collapse
what you want, but for me decrytped is easier to flash roms
Bigs1985 said:
I am. I tried formatting via twrp but it didn't decrypt. Ron is working just can't flash anything via twrp. Help!
Click to expand...
Click to collapse
Can you see it in Android? I can see and use it. I wouldn't know about TWRP, I always use adb sideload.
Naxiz said:
Can you see it in Android? I can see and use it. I wouldn't know about TWRP, I always use adb sideload.
Click to expand...
Click to collapse
Yeah, files are accessible while phone is on. Only in twrp are they not viewable.
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
REQUIREMENTS
Click to expand...
Click to collapse
- TF300T (it can be installed on TF300TG but no 3G support!)
- Unlocked bootloader
- Your bootloader must be at least on Jelly Bean version (10.4 and above). - We recommend that you run the 4.2 Bootloader.
DOWNLOADS
Click to expand...
Click to collapse
Google Apps:
http://goo.im/gapps
Nightlies:
http://get.cm/?device=tf300t
HOW TO INSTALL
Click to expand...
Click to collapse
First installation :
1) Unlock your device, and install TWRP recovery (look in the development forum for the thread)
2) Push the update zip to your internal memory
3) Reboot in recovery (Shutdown tablet, press Vol Down + Power, then press Vol Up when prompted)
4) Make a backup
5) Navigate to "Install zip from sdcard", "Choose zip from sdcard", and choose the update zip you previously pushed to your tablet
5a) If you want Play Store, flash gapps now too (link above)
6) Go back and Wipe data/cache
7) Reboot
Updating from previous build:
1) Push update zip to /sdcard/
2) Reboot in recovery
3) Flash as above
4) Reboot
If any issue after updating, wipe data.
CHANGELOG
Click to expand...
Click to collapse
http://changelog.bbqdroid.org/#tf300t/cm10.1/next
SOURCES
Click to expand...
Click to collapse
http://github.com/cyanogenmod
http://github.com/cyanogenmod/android_kernel_asus_tf300t
http://github.com/cyanogenmod/android_device_asus_tf300t
DEVELOPERS
Click to expand...
Click to collapse
xplodwild, bumble-bee (for tf201 device tree from which this tree is inspired), chrmhoffmann, loganmc10, dasunsrule32 for some help, cyanogenmod
SUPPORT US
Click to expand...
Click to collapse
You can either help us by giving FULL bug reports WITH LOGS, WITH REPRO CASE, ETC, or by submitting patches.
If you're not a developer, but still want to support you can hit the "Donate to me" button up ahead. Chrmhoffmann, please remind me to give you some of it - Remember this is something we're doing in our free time, so a small gift is always appreciated and motivates us to keep on updating the port Thanks to all donators!
Woot thanks man, appeciate it!
Tears of Joy
Well almost anyways.
Anyone else getting FC every time the AOSP keyboard try's to popup ?
EDIT: reflashed without gapps and it's fine, but as soon as I flash gapps the FC come back on popup keyboard. Otherwise rom seems fast, everything else seems ok at first glance but I flashed back to a backup cause the ROM in unusable without the keyboard.
So we don't have to be on the 4.2 bootloader for this to work? 4.1 bootloader will be fine?
zaki0saad said:
So we don't have to be on the 4.2 bootloader for this to work? 4.1 bootloader will be fine?
Click to expand...
Click to collapse
The 4.2 Bootloader is preferred, but I have only tested it on the 4.2 bootloadee (my own build). Off course you can try if you are still on the 4.1 bootloader. If the ROM does not boot, then you will know
Sent from my Nexus 10 using Tapatalk 4
zurny said:
Anyone else getting FC every time the AOSP keyboard try's to popup ?
EDIT: reflashed without gapps and it's fine, but as soon as I flash gapps the FC come back on popup keyboard. Otherwise rom seems fast, everything else seems ok at first glance but I flashed back to a backup cause the ROM in unusable without the keyboard.
Click to expand...
Click to collapse
Did you build yourself? Because there is no nightly build yet to download.
If you downloaded the latest nightly from get.cm, and flashed the 4.3 gapps then it would be a bit logical that you get a fc because you flashed 4.3 gapps on a 4.2.2 build.
Sent from my Nexus 10 using Tapatalk 4
Great! Waiting patiently for the official thing
joelalmeidaptg said:
Great! Waiting patiently for the official thing
Click to expand...
Click to collapse
Yeah, that same feeling when he made a post for CM10.1 and wait for a while to get it haha.
scanno said:
Did you build yourself? Because there is no nightly build yet to download.
If you downloaded the latest nightly from get.cm, and flashed the 4.3 gapps then it would be a bit logical that you get a fc because you flashed 4.3 gapps on a 4.2.2 build.
Sent from my Nexus 10 using Tapatalk 4
Click to expand...
Click to collapse
Wow I feel an idiot, looks like I flashed 10.1, I looked at the release date but didn't check the filename, carry on, nothing to see here
glad for your repaired tf300
After I saw that you recommended CWM for this ROM, I downloaded and flashed it. It ****ed up my device, only allowing me into CWM, not even fastboot. That gives me ADB, but CWM wont mount anything, so I cant flash anything...PLEASE HELP ME!!!
I believe you need TWRP 2.5 instead
kriscodian said:
After I saw that you recommended CWM for this ROM, I downloaded and flashed it. It ****ed up my device, only allowing me into CWM, not even fastboot. That gives me ADB, but CWM wont mount anything, so I cant flash anything...PLEASE HELP ME!!!
Click to expand...
Click to collapse
The new bootloader requires TWRP 2.5 instead - I am a firm believer in CM recovery for all my recovery needs except this. Please correct me if I am wrong, but currently as far as I know, TWRP 2.5 is the only recovery that works with the new Android 4.2+ bootloader. Check the basic threads for the background.
kjwaugh said:
The new bootloader requires TWRP 2.5 instead - I am a firm believer in CM recovery for all my recovery needs except this. Please correct me if I am wrong, but currently as far as I know, TWRP 2.5 is the only recovery that works with the new Android 4.2+ bootloader. Check the basic threads for the background.
Click to expand...
Click to collapse
I was on TWRP 2.5.0.0, but in the instructions in this ROM it said CWM. Now I can't flash Recoverys or anything...
What can I do to fix it?
Try the CWM Recovery thread
kriscodian said:
I was on TWRP 2.5.0.0, but in the instructions in this ROM it said CWM. Now I can't flash Recoverys or anything...
What can I do to fix it?
Click to expand...
Click to collapse
You were already there - try the link below:
http://forum.xda-developers.com/showthread.php?t=1668173&page=46
It covers the basics and shows the "new" fastboot mode aswell as the current state of this "new" bootloader requiring TWRP 2.5
Can I update from 10.1? In my galaxy s the partition layout for 10.2 is different from the 10.1 cm so it required a full wipe.
Thanks
Sent from my TF300T using Tapatalk 2
kjwaugh said:
You were already there - try the link below:
http://forum.xda-developers.com/showthread.php?t=1668173&page=46
It covers the basics and shows the "new" fastboot mode aswell as the current state of this "new" bootloader requiring TWRP 2.5
Click to expand...
Click to collapse
But neither of the methods work as I am not allowed into Those choices... It goes straight into CWM, no fastboot
kriscodian said:
But neither of the methods work as I am not allowed into Those choices... It goes straight into CWM, no fastboot
Click to expand...
Click to collapse
Make sure you have adb drivers installed when you are in CWM (check in device manager on pc) and then try typing adb reboot bootloader in adb.
Already tried...
Start at the beginning then
kriscodian said:
Already tried...
Click to expand...
Click to collapse
Install Asus stock rom, then install recovery, root it, factory reset and then continue with usual rom-flashing instructions.
This is a source-built version of CWM version 6.0.4.9 for Oneplus ONLY. Do not attempt to use this recovery on any other device.
Tested on Oneplus 64 Gb and 16 GB
Features:
OpenRecoveryScript-compatible
Backup/Restore
Mount/Unmount/Format Partitions
Warnings:
- I am not to be held responsible if you brick your device using this.
Bugs:
I have not managed to find any. If you find one, feel free to let me know.
Additional Notes:
- I will attempt to maintain this in my spare time. If a new release comes out that you are interested in and I have not updated yet, feel free to let me know.
- To flash this unzip files and click on recovery_start.bat
- To flash via fastboot, use only the Recovery Image File.
Download:
Version 6.0.4.9 (June 11th, 2014)
Link
http://d-h.st/XZ9
EDIT: Typo corrected in OP.
dansou901 said:
Kindle Fire HD 7? In Oneplus One section?
Click to expand...
Click to collapse
sorry typo error. Recovery is for oneplus
@acer73 any chance at compiling the touch version?
dmo580 said:
@acer73 any chance at compiling the touch version?
Click to expand...
Click to collapse
This is last ver with swipe (touch)
acer73 said:
This is a source-built version of CWM version 6.0.4.9 for Oneplus ONLY. Do not attempt to use this recovery on any other device.
Tested on Oneplus 64 Gb and 16 GB
Features:
OpenRecoveryScript-compatible
Backup/Restore
Mount/Unmount/Format Partitions
Warnings:
- I am not to be held responsible if you brick your device using this.
Bugs:
I have not managed to find any. If you find one, feel free to let me know.
Additional Notes:
- I will attempt to maintain this in my spare time. If a new release comes out that you are interested in and I have not updated yet, feel free to let me know.
- To flash this unzip files and click on recovery_start.bat
- To flash via fastboot, use only the Recovery Image File.
Download:
Version 6.0.4.9 (June 11th, 2014)
Link
http://d-h.st/XZ9
Click to expand...
Click to collapse
grazie mille
ha qualche bug ?
Don't quote OP and please use English.
good news!thanks!
Dualboot
Hi everyone
I have a Xiaomi M2s right now and the thing i like the most about the device is that it has 2 system partitions and that I can install MIUI on my first partition and CM11 on my second partition. This is ideal if you want to test a ROM but keep one stable system.
Is there any chance that there will be a way to re-partition the one plus to have this? Also CMW would need to have true dual boot right or is this a stock feature?
I don't know if partitioning is common on other devices?
The backups created appear to not have the correct dates for filenames. They start with 1970...
Is this a offical build? Will it be listened on clockworkmod.com anytime soon?
Does anybody have problems with mounting the SD card through CWM? On my device CWM wont backup because of not being able to mount the sd card. I solved this error by reflashing CWM through fastboot, but why does this error occur?
fiz:ik said:
Does anybody have problems with mounting the SD card through CWM? On my device CWM wont backup because of not being able to mount the sd card. I solved this error by reflashing CWM through fastboot, but why does this error occur?
Click to expand...
Click to collapse
Seems that it happens on all recoveries ATM. Happened to me on TWRP. hopefully the developers can fix the source of the problem soon.
What ROM were you running when this happened? I'm trying to narrow down whether its a ROM or recovery issue...or both...
Sent from my Nexus 7 using Tapatalk
MontAlbert said:
Seems that it happens on all recoveries ATM. Happened to me on TWRP. hopefully the developers can fix the source of the problem soon.
What ROM were you running when this happened? I'm trying to narrow down whether its a ROM or recovery issue...or both...
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Had the problem with Mahdi rom and Philz or cwm ... Hope they will fix this soon !
I found this .. Not really perfect :/ http://forum.xda-developers.com/showpost.php?p=54112729&postcount=24
MontAlbert said:
Seems that it happens on all recoveries ATM. Happened to me on TWRP. hopefully the developers can fix the source of the problem soon.
What ROM were you running when this happened? I'm trying to narrow down whether its a ROM or recovery issue...or both...
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
I'm on stock CM11S
I'm try to build a lot of rom but all of these bootloop or take a lot of time to start, or data partition unmount itself after a reboot.
No issue using PA version 20140708
So I think there is some issue in the last sources,otherwise if it was a problem of recovery also paranoid should have bootloop.
Now I'm trying to build PA with last sources
what about an update?touch edition?
blade_ said:
what about an update?touch edition?
Click to expand...
Click to collapse
Would be great, I hate TWRP and Philz, too. CWM is sufficient, but this project here looks abandoned
blade_ said:
what about an update?touch edition?
Click to expand...
Click to collapse
I actually hate recovery touch editions! When I had the ghost touches it f*cked up everything in recovery.
wacky.ddw said:
I actually hate recovery touch editions! When I had the ghost touches it f*cked up everything in recovery.
Click to expand...
Click to collapse
no problems in all my phones with touch
Andro XWorlds 1st Flashable ZIP ROM for Moto G (2nd Gen)
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is a ROM for Pure Android Experience......
Features:
~ Stock
~ Removed Unwanted Gapps, Moto apps.
~ Xposed Installer:good:
~ GravityBox:good:
~ Pre-Rooted:
~ CM File Manager
~ DSP Manager
~ Less RAM usage ( probably after removing the bloatware )
~ Android Boot animationRequirements1. Unlocked Bootloader
2.Root access
3.Custom RecoveryInstallation1. Place the downloaded ROM on your Internal/External Storage
2. Boot into custom recovery
3. Factory reset/Full wipe
4. Flash Andro X ROM
5. Wipe Dalvik cache
6. Reboot
1st boot will take few minutes.....
Enjoy.....Bugs:
- F/W 21.11.14 bugs
Credits
@lost101 (For his Updater Script and encouragement)
@lols21.10
CM (for CM File Manager, DSP Manager )
@rovo89 (Xposed Installer)
@C3C076 (GravityBox)
ROM Info:
ROM OS version: 4.4.4 KitKat
ROM Kernel: Linux 3.4.x
Based on: Stock ROM
Version Information:
Status: Stable
Version: 1.0
Release Date: 05-10-2014
Download
http://www.mediafire.com/download/i8hp6of74p1ygzz/Andro-X.zip
Reserved
#Reserved
Great start...
>removes bloatware
>adds Xposed
oh well this doesn't really make sense
And most awaited game begins for moto g 2....
Gabboplano said:
>removes bootloader
>adds Xposed
oh well this doesn't really make sense
Click to expand...
Click to collapse
It doesn't remove bootloader, It requires a bootloader unlocked device.
Finaly! Thx man!
Gabboplano said:
>removes bootloader
>adds Xposed
oh well this doesn't really make sense
Click to expand...
Click to collapse
As @Pyr0_Bl4de said, "Unlocked bootloader" means that you need to unlock your bootloader first before using this ROM. Another thing is unlocking the bootloader will probably void/cancel your warranty, so keep that in mind.
which recovery is this rom safe on? ive tried flashing the TWRP 2.8.0.1 but am getting mismatch partition. would TWRP 2.7.1.1 work?
marcviado said:
which recovery is this rom safe on? ive tried flashing the TWRP 2.8.0.1 but am getting mismatch partition. would TWRP 2.7.1.1 work?
Click to expand...
Click to collapse
Use TWRP v2.7 for flashing. v2.8 seems to have some issues.
Congrats! ROM will be added to index ASAP!
marcviado said:
which recovery is this rom safe on? ive tried flashing the TWRP 2.8.0.1 but am getting mismatch partition. would TWRP 2.7.1.1 work?
Click to expand...
Click to collapse
Use TWRP 2.7.1.1
marcviado said:
which recovery is this rom safe on? ive tried flashing the TWRP 2.8.0.1 but am getting mismatch partition. would TWRP 2.7.1.1 work?
Click to expand...
Click to collapse
Bro i also got mismatch partition it doesn't matter just ignore it recovery will bes installed :good:
@Pyr0_Bl4de Nicely done. Congratulations for coming first.
Okay i have 2.7.1.1 recovery up.rom flashed and booted but now i have data bars lit up but it doesnt say any H or H+
edit: i didnt realize xt1068 was the dual version.im on xt1064 single sim and flashed this rom. i know..my dumb self all on me.. is there any way to restore back to complete stock xt1064? i made a backup before i flashed the rom i tried to restore it but because of different model number it said fail. i rebooted the phone and it all booted up as a fresh xt1064 phone as if i just factory reset the device. i have data signal ,everything seems to be working fine. again sorry for my misunderstandings and errors i came across.
marcviado said:
Okay i have 2.7.1.1 recovery up.rom flashed and booted but now i have data bars lit up but it doesnt say any H or H+
Click to expand...
Click to collapse
which device are you using ? which f/w are you from ?
Guys , if you have any queries about the ROM. please post it in this thread
http://forum.xda-developers.com/showthread.php?t=2896353
Pyr0_Bl4de said:
which device are you using ? which f/w are you from ?
Click to expand...
Click to collapse
sorry..upon my stupidity i didnt realize xt1068 was the dual sim as i have the xt1064 single sim.i flashed back my backup but got a fail.i rebooted the device and it booted up just fine as my regular xt1064 model as if i factory reset the phone so none of my stuff restored,which is fine by me as long as my phone still works.ill just redownload my apps again
I assume this wouldn't work on XT1069? Nice work btw
@Pyr0_Bl4de Try to include Viper4Android and Extreme Beats Studio instead of DSP manager in your next build. Although you would need the Permission of @Applicare Studios and @zhuhang to include them in the ROM. It's totally worth it.
OrangeFox Features
* Unique design in Android Pie style
* Supports Android Oreo and Pie
* Supports Treble and non-Treble ROMs
* Updated with latest TWRP commits
* Built-in support for installing init.d functionality
* Built-in support for installing Magisk
* White Flashlight
* Password, torch, led
* Support for Miui and Custom ROMs
* Better language support
* Optimized versions of community scripts
* Fox theme engine:
- choice of theme (black, dark, etc)
- choice of color scheme
- choice of splash screen
* Alternative lockscreen
* And many more!
Click to expand...
Click to collapse
About this build
Clean OrangeFox R10, without any tweaks and modifications.
Click to expand...
Click to collapse
Information
OrangeFox Version: R10
Latest Stable: R10.0-1
TWRP: 3.3.1.x
Click to expand...
Click to collapse
Issues
None
Click to expand...
Click to collapse
Downloads
Stable: https://files.orangefox.website/OrangeFox-Stable/ysl
Beta: https://files.orangefox.website/OrangeFox-Beta/ysl
Click to expand...
Click to collapse
Source
Device Tree: https://gitlab.com/OrangeFox/Devices/ysl
Click to expand...
Click to collapse
XDA:DevDB Information
[R10] OrangeFox Recovery - Stable [Official][all working], Tool/Utility for the Xiaomi Redmi S2
Contributors
MyCats
Version Information
Status: Stable
Created 2019-07-10
Last Updated 2019-08-30
Hi, i try use R10 Stable version, and there is no Format Data option.
I check on Manage Partition (that mentioned on Wipe section), no Format Data option.
I like this recovery, cute Fox.
meiax93 said:
Hi, i try use R10 Stable version, and there is no Format Data option.
I check on Manage Partition (that mentioned on Wipe section), no Format Data option.
I like this recovery, cute Fox.
Click to expand...
Click to collapse
Hi, I will fix it in next Beta (R10.1-RC1)
MyCats said:
Hi, I will fix it in next Beta (R10.1-RC1)
Click to expand...
Click to collapse
Thanks. I use TWRP to do format data and after finish setup MIUI 10.3.3, i use back this OrangeFox.
Anyway keep it up, great job. :good:
MyCats said:
OrangeFox Features
About this build
Information
Issues
Downloads
Source
Click to expand...
Click to collapse
Hi, @MyCats!
Can you help me?
How I can use it?
What need to do?
maybe links on resources what to do and how?
kaanr said:
Hi, @MyCats!
Can you help me?
How I can use it?
What need to do?
maybe links on resources what to do and how?
Click to expand...
Click to collapse
See some recovery installing guide
MyCats said:
See some recovery installing guide
Click to expand...
Click to collapse
Hi!
Thank you!
I'm newbie in that))
New build is up! (R10.0-1 Stable)
- Works fine with Android 8 and 9
- Fixed img displaying
- Fixed baterry displaying
- Fixed format data
- Fixed MTP
- Fixed flashlight
No known issues now.
Can i use this to install 64 bit rom? Pls reply im going to use it now cus ur recovery has less hassle and clear instructions
Devilukeards said:
Can i use this to install 64 bit rom? Pls reply im going to use it now cus ur recovery has less hassle and clear instructions
Click to expand...
Click to collapse
It should, try it. Don't have this device on hands so can't test.
I have a question is that can I delete these files on the fox folder (it's 3GB) . Also I don't want the orange fox to install my miui updates, I just want my system updater to do it even if it means removing the orange fox, it's still ok.. can I do this?
The beta version of this recovery shows SD card and USB storage 0 mb and thus we can't access them from recovery nor we can mount them (this problem is in beta version only)
I flashed stable version of this recovery but touch was not responding, not even a bit..... then i installed beta version and touch worked, but whenever i tried to install lineage os 16.0 , it shows error 255 ..... i also tried twrp 3.2.1.0 earlier but touch was not responding there as well....nor was otg mouse.... i flashed twrp 3.3.1.0 as well and there otg was working fine but even after installing the rom amd booting up, touch was irresponsive help!!
zick pick said:
I flashed stable version of this recovery but touch was not responding, not even a bit..... then i installed beta version and touch worked, but whenever i tried to install lineage os 16.0 , it shows error 255 ..... i also tried twrp 3.2.1.0 earlier but touch was not responding there as well....nor was otg mouse.... i flashed twrp 3.3.1.0 as well and there otg was working fine but even after installing the rom amd booting up, touch was irresponsive help!!
Click to expand...
Click to collapse
Try this recovery https://forum.xda-developers.com/redmi-s2/development/arm64-twrp-v3-3-1-0-redmi-s2-y2-t3954150
For me it's working fine
i already mentioned , i had tried 3.3.1.0 ..... by the way my issue was resolved by the service centre and for free (under warranty ) i just cleared everything , installed original rom locked the bootloader and went straight in stating that touch became irresponsive after update .... also i would like to update that , i tried pitch black , orange fox stable plus beta , twrp 3.3.1.0,3.2.1.0 and at last flashed stock fastboot rom using mi flash tool as well but failed to solve the problem then ..... I'd 2 phones that made it easy for me
This is really nice, Thanks devs
I can't decrypt the data partition. I'm trying for hours to find an answer. Can anyone please help me? Lock screen password doesn't work.
Snpy1337 said:
I can't decrypt the data partition. I'm trying for hours to find an answer. Can anyone please help me? Lock screen password doesn't work.
Click to expand...
Click to collapse
Go to wipe and click on format data then enter yes and swipe the slider it will format your internal and your encryption will remove
mohitdabas07 said:
Go to wipe and click on format data then enter yes and swipe the slider it will format your internal and your encryption will remove
Click to expand...
Click to collapse
Thanks for the answer, my friend. I really appreciate it. I've already solved this problem.
The thing was that after I format data and rebooted to system it kept encrypting it again. For some people rebooting to recovery again and flashing magisk from an SD card worked. For me it didn't. So I tried again but wiping data, cache, and system and flashing another ROM.
Hi,
I'm actually considering buying the Xiaomi Redmi S2 and I have some questions regarding the device and this recovery.
1. Would you recommend the S2 in 2019/2020
2. Is Treble TWRP required to use treble ROMs or can I install this directly and also use treble ROMs.
3. Any recommended tweaks for this device.
4. What configuration of RAM and Storage would you recommend? (I only found 3GB RAM and 32GB Storage versions)
5. Expandable Storage? (microSD)
6. Any bugs with treble in general or specific treble ROMs?
7. Anything to look for when buying this device used?
Kind Regards
Mod Edit
Important note: if you going to report a bug plz give the logs also so reporting it actually will done something
Also:
this rom got no bug
Microsd/Sim2 tray Mod?
Hi luiscool,
Thanks for the ROM mate, but can I ask what you did to ensure that Snapchat antiban?
Kind regards,
Nathan
Hello. Thanks, I'm testing it now.
Luiscool Rom
Nolan01 said:
Hello. Thanks, I'm testing it now.
Click to expand...
Click to collapse
Any telegram group for this rom?
baruaberger said:
Any telegram group for this rom?
Click to expand...
Click to collapse
I don't think so. But it would be good.
how to use the prepatched twrp??
I've found two bugs so far. First, you cannot get a backup from Samsung Cloud and second, Magisk Manager won't open just crashes. I have reinstalled both the rom and TWRP to make sure that it wasn't a one off thing.
lambik333 said:
how to use the prepatched twrp??
Click to expand...
Click to collapse
Flash in Odin in the ap slot. If you're using TWRP .7 or .8 already you don't need to use it though.
Regards,
Nathan
Rennert said:
Microsd/Sim2 tray Mod?
Click to expand...
Click to collapse
Please test if it works or not else i add it in the next update
sevsman said:
Hi luiscool,
Thanks for the ROM mate, but can I ask what you did to ensure that Snapchat antiban?
Kind regards,
Nathan
Click to expand...
Click to collapse
I have done a system modification if you want to apply this to another ROM then you can pm me for the fix as i prefer leaving this thread to normal user / ROM feedback not fixes.
Nolan01 said:
Hello. Thanks, I'm testing it now.
Click to expand...
Click to collapse
good luck
lambik333 said:
how to use the prepatched twrp??
Click to expand...
Click to collapse
Do as sevsman said, flash it in ODIN and then flash my ROM
tripping_ said:
I've found two bugs so far. First, you cannot get a backup from Samsung Cloud and second, Magisk Manager won't open just crashes. I have reinstalled both the rom and TWRP to make sure that it wasn't a one off thing.
Click to expand...
Click to collapse
The Magisk thing is a bug because magisk.apk is not included in the ROM, just install latest Magisk.apk and it works and for Samsung Cloud you must sign in first before you can use it as always. although i did not test it so please give logs if it continues to not work so i can fix it
Thanks
thank u
Flashed the Rom. Everything seem to work fine but couldn't get backup from Samsung Cloud as reported earlier by another member. Please fix it.
Thanks
Very nice. downloading. :fingers-crossed::fingers-crossed::fingers-crossed:
Magisk always freeze and not working or I am doing something wrong.
ok next version no more samsung cloud bug i will check it out
"100% camera quality" - can you prove it?
I have flashed the rom, everything works except that Magisk Manager says Magisk is not installed. What did i do wrong and how can i fix this?
Tok12 said:
I have flashed the rom, everything works except that Magisk Manager says Magisk is not installed. What did i do wrong and how can i fix this?
Click to expand...
Click to collapse
You need to select reboot to recovery after flashing the ROM.
sevsman said:
You need to select reboot to recovery after flashing the ROM.
Click to expand...
Click to collapse
I just did a complete wipe, reflashed the rom,held the combination to reboot in recovery. Once in recovery i booted into the system. Still no Magisk?
Tok12 said:
I just did a complete wipe, reflashed the rom,held the combination to reboot in recovery. Once in recovery i booted into the system. Still no Magisk?
Click to expand...
Click to collapse
In recovery you're meant to use reboot/recovery and not system.