In v29a the audio no longer works as before, although it reproduces the high resolution formats, does a resampling at 48 kHz, I reviewed it by capturing the audio from the headphone output to the computer. In Marshmallow it supported up to 24 bit 192 kHz.
Can anyone play high resolution audio with all the quality and check it?
Thank you
Related
Is there any way to increase the audio quality when anything is recorded? I am getting 8000 hz. horrible. not sure about the bit rate, but still if that is changed audio would be alot better.
I used to have an iphon (hated it everyday) but when I hacked it and downloaded a video camera program, the picture was horrible the audio was recording at 44100 hz and the bitrate was 705 kbits/sec. only 1 channel but you should hear the audio because wow.
can anything be done with total commander??
Somebody took the time to make this nice comparison between what is available in video for audio (appalling) and what is possible with the microphone for a N1, but should more or less be the same for the Desire:
http://monopedilos.com/mediagallery/album.php?aid=87&page=1
This really needs fixing.
That's ridiculous. Anyway, I took four 20 seconds recordings of some of my music, once in HTC Sense camera, once with DeFrost Nexus One camera. They have exactly the same quality, I think, but you judge, they're attached in a zip.
alphagamma said:
Somebody took the time to make this nice comparison between what is available in video for audio (appalling) and what is possible with the microphone for a N1, but should more or less be the same for the Desire:
http://monopedilos.com/mediagallery/album.php?aid=87&page=1
This really needs fixing.
Click to expand...
Click to collapse
the N1 has dual mic for noise cancellation.
I doubt it has anything to do with the dual mic. If media_settings.xml file is anything to go by, audio in video files is recorded using the amrnd codec, at a quality of 12.2kbps and a sample rate of 8000Hz...
Same on all profiles from the looks of it (720p, low, youtube, etc)
Code:
<AudioEncoderCap name="amrnb" enabled="true"
minBitRate="5525" maxBitRate="12200"
minSampleRate="8000" maxSampleRate="8000"
minChannels="1" maxChannels="1" />
And don't forget the audio settings they said they used for PCM Recorder Lite...
16-bit WAV at 44.1kHz... then converted to MP3 (conversion makes no difference to the initial recorded format, other than compressing it)
Is is purely about the amr audio codec used in video recording.
Why not write out 44.1kHz 16 bit PCM data to the mp4.
What settings is everyone using for their video encodes?
I'm not asking how to get it to work, but wondering whats the optimum settings people have found to balance quality and size.
I used to just hit iphone4 preset in handbrake or encodeHD @ 1500 bitrate, as my old phone had same res and couldn't handle hi profile. But our shiny new OneXs can handle hi profile and 720p.
i always use the highest quailty setting regardless of output file size
This page has some recommendation that sounds reasonable. (balance between quality and file size)
http://www.playbluraysoftware.com/?p=462
Format: .mp4
Video Settings
Codec: h264
Size: 1280*720
Bit Rate: 1,200 kbps
Frame Rate: 24fps
Audio Settings
Codec: aac
Sample Rate: 44,100 hz
Bit Rate: 128,000 bps
Channels: Stereo
I have several suggestions for Emui.
-Set the maximum audio bitrate at 320kbps to Media_profile instead of 192kbps.
-Set the maximum bitrate of 1080p at 20mbps and 60mbps for 4K (264) to Media_profile
-Increase the resolution of the native screen recorder to FullHD or FullHD+
-In some games the audio is desync (also happens when using recorder)
I have tried to do it with root in the past with .195 and it shows a substantial improvement in video and audio recording.
I would like that together we get Huawei to read us ... it is absurd to have 192kbps of audio and a low bitrate for video and an HD resolution for a FullHD screen ...
Thanks
Hi-Res Audio enabler and sound booster headphones Only Realme 7 Pro
I threw on a mod for the hobby of quality and volume in headphones.
Hi-res enabled by default (24 bit / 96 kHz)
Volume increased to the maximum value
Increased the sound quality of video recording from the camera
Install via Magisk
Git updates
HD is a wonderful thing especially if your using .wav* files and higher resolution media files.
*HDCD's need to be stored as .wav files only to prevent the loss of their HDCD subtext; they can't be altered to another file type as the subtext is lost in the conversion.
They can have up to 22 bit resolution vs a CD's 16 bit if handled properly. No decoder is needed but they signal needs to stay in the digital realm and go into a 24 bit or higher DAC. Doing so will glean 90+% of the encrypted subtext giving a noticeably broader sound stage and more accurate sound stage reproduction.
Many CDs are HDCDs, and many of those are not labeled as such... a pleasnat surprise from a sound engineer/producer that knows what they're doing