Related
Well, this is pretty newbie advice to most of you, so you may think it doesn't warrant a write up, but I had to do some searching for info on how to upgrade my ROM so I thought it would be good to put it all in one thread.
1) Download the ROM you want from the FTP server....Details here http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
2) Download MaUpgradeUt_noID.exe to your Desktop from here http://forum.xda-developers.com/download.php?id=7644
3) Disconnect your device from the USB cable.
4) Hold the Power button + Light bulb button, and press the reset pin found at the back of the device (fiddly if you have large fingers).
You will notice that the screen of the device is dark but has “USB” and "v 1.0" written on it.
5) Connect back your device via the USB cable.
6) Run the download ROM upgrade application...When it prompts you to begin the upgrade process, just minimise the window or leave it alone (DON'T CLOSE THE PROGRAM).
7) Whilst it is running, use Windows to search for a file named RUU.dll
8 ) Right click file and choose ‘Open Containing Folder’
9) Select all files and copy them
10) Create a temporary storage location....C:\Upgrade....And Paste all copied files in here.
11) Copy the file MaUpgradeUt_noID.exe from the desktop into C:\Upgrade
12) Close the previously started upgrade application running in the background
13) Run MaUpgradeUt_noID.exe from it's C:\Upgrade location
The upgrade process should begin now…If it does not, run the MaUpgradeUt_noID.exe application again
Make sure you DO NOT DISCONNECT the cable.
The upgrade takes around 20 minutes to complete.
14: Disconnect the USB cable when told, then push the reset pin. Ignore the advice to do a hard reset by holding down the soft keys while you do this, just push the reset pin by itself. Your Universal will load the new ROM image and you're all done.
Thanks.
Thanks!
There is only one thing, step 4, it is not USB but Serial.
Mento said:
Thanks!
There is only one thing, step 4, it is not USB but Serial.
Click to expand...
Click to collapse
It will go to USB when upgrading.
It doesn't seem to work with last Qtek 9000 ROM...
Help!
OK, I made my own instructions. Follow this instruction of mine:
The file is extracted in your computer. Once you run the shipped.exe file, you need to go to:
My Computer
Your Drive (mine is Drive C)
Show the contents of this drive
Documents and Settings
Choose your folder name
Choose "TOOLS" from the menu bar
Choose "FOLDER OPTIONS"
Click on the "VIEW" tab
Click on "HIDDEN FILES AND FOLDERS"
YOU WANT TO SHOW ALL HIDDEN FILES AND FOLDERS
Now go to TEMP folder
Now you will notice a bunch of folders will show up, tons of them to be exact. What you need to do now is click on the shipped.exe file again and "LOOK" for the folder being created because that folder is what you want to copy. If you did not see it created, you have to manually open each folder and look for the files I listed below.
Assuming you found the folder, you will have these following files inside that folder:
ms_.nbf----------------------this file is responsible for EXT ROM Version
nk.nbf------------------------this file is responsible for Windows Mobile Version
radio.nbf---------------------this file is responsible for Radio Version
EnterBL
GetDeviceData
readme
ROMUpgradeUt
RUU.conf
RUU.dll
UI.dll
MaUpgradeUt_noID
If the file MaUpgradeUt_noID is not there. You need to get hold of a copy of this file as you need this.
There you have it, REMEMBER, you need to have the MaUpgradeUt_noID file plus all the rest of the file if you want to upgrade to the ENTIRE I-Mate ROM, QTEK, O2, or whatever ROM you want.
If you only want to upgrade to the radio version then you need to delete 2 files namely: "ms_.nbf" and "nk.nbf". Leave "radio.nbf" alone and click on the "MaUpgradeUt_noID" file to initiate the Radio installation. Basically those 3 files control what you want to update on your device.
Hope my instructions were clear enough for you. Hope this helps.
cannot locate files after running exe
Hi All, I have ran the ROM update exe and the message saying extracting file XXX etc appears OK then the program closes. When I search for the files, for instance *.nbf they dont exist anywhere on the computer - does the exe autodelete the temp directory and have I missed a stage ? Any help gratefully accepted
Re: cannot locate files after running exe
SteveInUK said:
Hi All, I have ran the ROM update exe and the message saying extracting file XXX etc appears OK then the program closes. When I search for the files, for instance *.nbf they dont exist anywhere on the computer - does the exe autodelete the temp directory and have I missed a stage ? Any help gratefully accepted
Click to expand...
Click to collapse
Did you follow the instructions above on how to show hidden files and folders? After double clicking the .exe file and running it, leave it open then look for the NEWLY created folder in the TEMP folder as instructed. You need to look for it the hard way by opening each folder one by one and check for the files to see if you got the right one.
someone advised me for some extra step, someone please advise is it coorect steps:
"Then you need to make a small change to one of the text files. Look in the directory for
RUU.conf
Open it in notepad and add this line
[CHECKCEID_TYPE]=1
then save it
That’s about it….."
thx for reply christian,
yes i tried searching every folder the manual way but still no joy, I have just copied the rom exe onto my other computer and it worked OK on there and updated my exec without any further problems
Hi All, Linked to the update of the exec software , i noticed the audio playback on tom tom navigator and media files is very jerky to the point you can hardly make out what is being said. has anyone else had the same problem and have you found a solution to fix the problem ?
many thanks
Steve
Bricked QTek 9000
I got a Qtek on ebay and it was working when I tried to upgrade it failed with a "115" Radio Error.
Tried the method on this thread and it completes the upgrade but when I reset, I does not change from "USB v1.0" can anyone help!!!!
Hi
I'd like to take the risk for updating my Dopod 900 for new versions of ROM & radio, but I've got couple of questions.
1. I've got Dopod 900. I do understand, that it's absolutely the same with Qtek9000, but to be sure: may I use ROM update for Qtek?
2. My ROM (1.13.69) & radio (1.04.02) as of 10/12/05 are ancient What version of ROM & radio consider to be stable as of now? I saw in signatures that people using ROM 1.30.77 and radio 1.09.00. Are they OK?
3. I got on FTP and was a bit confused: as far as I understood the latest ROM is 1.30.100 (UNI_QTEK_130100_190_10900_ESN_Ship.exe), but it's for ESN (Spanish???) localization. So in order to get WWE I should use UNI_ORUK_13090_174_10300_WWE_Ship.exe and that update radio separately from 1.03.00 up to 1.09.00 or just UNI_QTEK_13077_176_10900_WWE_Ship.exe? What would u advice me?
4. What is the benefit for updating from 1.13.69 and 1.04.02? Will it works faster & more stable?
Thx in advance & take care
Hi
I tried this and get a 120 (incorrect country ID) error.
Strange, my V1640 from Vodafone is spanish and i want to upgrade to UNI_QTEK_130100_190_10900_ESN_Ship.exe
so it should be ok.
Am i wrong? Is there a way to get rid of that message?
Hi I have a Xda Exec
ROM: 1.13.82 WWE
Rom date 11/30/05
Radio 1.04.02
Protocol 42.37.P8
Ext Rom 1.13.188WWE
And when i do this:
4) Hold the Power button + Light bulb button, and press the reset pin found at the back of the device (fiddly if you have large fingers).
The devide says me:
Boot options:
Enable KITL
Clean registry hive
Format storage
I soupouse that it isn´t the boot loader for go on with the proces... what happens?
I want to upgrade to UNI_QTEK_13077_176_10900_WWE_Ship.exe for use my heasphones motorola stereo... (AD2P..)
Can any body help me?
Thanks a lot
Please!!!
Edit post number 1 and add as the last step:
14: Disconnect the USB cable when told, then push the reset pin. Ignore the advice to do a hard reset by holding down the soft keys while you do this, just push the reset pin by itself. Your Universal will load the new ROM image and you're all done.
It seems that a lot of people are having trouble after a ROM upgrade by following the instructions on the upgrade program which tell them to hard reset.
Many thanks! PU10 by German T-Mobile upgraded to WWE
I have a T mobile mda pro, any recommendations as to what the best rom is.
Im torn between the new orange rom which is supposed to be good and the jasjar one?
Anyone?
Latest jasjar ROM
Hi,
Can I follow these instructions with my UK jasjar?
Where can I find the latest Rom?
Cheers
Anyone can point me out to the adequate ROM?
thanks
astpaul said:
Hi
I tried this and get a 120 (incorrect country ID) error.
Strange, my V1640 from Vodafone is spanish and i want to upgrade to UNI_QTEK_130100_190_10900_ESN_Ship.exe
so it should be ok.
Am i wrong? Is there a way to get rid of that message?
Click to expand...
Click to collapse
hi,
i'm a newbie, and yes i have screwed up.. performed (or should i say.. almost performed) my rom update on my desktop (which is kinda slow PC...) i had no applications or unwanted services running, my computer. The Progress on the Rom update (the desktop couterpart) had incremented and had become full (the progress bar i mean..) and it was nicely sitting there for about two hours with no indication of any further progress (yeah just wanted to make sure it wasnt me being hyperactive or in a hurry )
On the PDA it was a different story.. the screen indicated a 100% copy of some image file and then it was stuck at "Reset Hermon" stage. )for the record, i feel like a parrot now, these words dont really make sense to me.. )
So i removed the cable, battery and booted up my phone after about ten minutes... yup, just like i had expected it got stuck at the bootloader screen.
Now obvisously, my Rom update wizard wont work, as the very first step is to check for a existing Active Sync Connection. and Activesync is not a application tht recognizes phones connected in their bootloader mode...
Now i have no idea about trying to flash thru the memory card, i tried copy pasting all the files that the Rom update file had generated in the desktop folder it was run in(about 4 exe files that are supposedly 'not a valid 32-bit application' and two .abi files.. one of the abi file is 85 mb, so i guess that was the image file.. but when i copied these files into the memory card and re booted my PDA, it didnt show any change, as in it still asked me to connect the USB cable and was trying to get the image from there..
I have a o2 xda zinc. yeah, with no Operating system ..
to say that help would be appreciated is a understatement
damn, contacted the o2 support guys, but i have this feeling that this (forum ) would be a faster way to know if i have to drop my phone at the 'collection center' or not. i am still optimistic as the phones under warranty and its just a software glitch. Please enlighten me. what are my options?
hi
my o2 zinc has the same problem just like yours
if your zinc fixed or any thing new pleas tell me
tnx
go to this post
http://forum.xda-developers.com/showthread.php?p=1512766#post1512766
hi mazi_v, i have problem when upgrading my XDA II.now it just displaying
USB and V 1.02
what i have todo?
thank's
"what i have todo?"
connect it to usb and rerun the flash
I have installed the connectivity on many machines that others have given up on!
It's EASY! Before you begin, You might also need to open my computer, click on tools, folder options, views and put checks in display contents of system folders
also put a check on show hidden files and folders. Just so that you will be able to see the necessary folders and files.
1) Un-install any other android phone connection software that might be installed on the PC.
2) Use Microsoft Update and get the PC updated to the latest available updates.
3) Install the latest Media Player available to your OS. (XP is only capable of 11) NOTHING LOWER THAN !0 WILL WORK.
The files can be downloaded from the link below.
4) Copy the 2 files in the Toshiba INF folder to your Windows/inf folder (The original ones in your system are mostly the reason for the problem)
5) Install the Kies software, and do not let it update! The newer version won't work.(Don't panic, it takes a few minutes to complete the install)
6) After you're all done, make sure you have the USB Debugging checked on your phone. (Settings/developers options)
Connect the phone to the PC using the USB cable that came with the phone.
It may take a while for the new drivers to install, and also a while to recognize the phone. Just be patient
7) If the system does not work the first time, disconnect the phone and reboot the PC.
8) Open Kies and do the Troubleshoot Connection (it has kept a record of what needs to be fixed when it tried and failed.
9) After it completes, Re connect the phone to the PC, after a while, it will make the connection!
10) After the first time it connects, you will no longer need to run the Kies software to connect to the PC.
Just connect the cable and the PC will recognize the phone..
If for some reason it loses connectivity and cannot connect again, just run the kies again and it will work like it did before.
The files you will need (except the Media Player) can be gotten here:
http://bitshare.com/files/scn15w79/Best-Way.rar.html 3/18/2013
http://www.putlocker.com/file/0D6BDDFFF311EF1C
Link added and checked as of 6/8/13
4) Copy the 2 files in the Toshiba INF folder to your Windows/inf folder (The original ones in your system are mostly the reason for the problem)
what is the windows/inf folder?
im tyring to search it but not getting any hits
thanks
mikey
on ur computer not the phone
bobolinko said:
on ur computer not the phone
Click to expand...
Click to collapse
where are the windows inf files located?
im doing a search and coming up empty
On pc..click start then computer. Now click C drive go to Windows folder open scroll down to INF folder and there you go!
Sent from my SGH-T999 using xda premium
I was advised to check this thread out in regards to my S2 lte having the same issue. That being said it hasn't worked. Can't see what I could be doing wrong. As far as i can tell the only thing that was even slight unclear is whether or not to delete the original files int he INF folder as the two files in the Toshiba folder have the same name as the ones in the INF folder. So I choose copy and replace. Was that incorrect?
AAARGHHHH the issue has now spread to my 10.1 Tablet. Nothing connects now.
bobolinko said:
4) Copy the 2 files in the Toshiba INF folder to your Windows/inf folder (The original ones in your system are mostly the reason for the problem)
Click to expand...
Click to collapse
Where is the Toshiba/inf folder located?
The Round Peg said:
Where is the Toshiba/inf folder located?
Click to expand...
Click to collapse
That would be wherever YOU downloaded it to
when you click on the download link at the end of the list, you will download it. unpack the files. Then you will be able to copy them to the ini file folder in windows.
You might also need to open my computer, click on tools, folder options, views and put checks in display contents of system folders
also put a check on show hidden files and folders.
it's is not that hard to understand if you read the steps carefully. maybe you might want to print the list out, and check off each step as you complete it. Also you would be able to reference the file as you are doing the steps.
if you skip any one of the steps, or jump around, it may not work as the steps in the procedure were deliberately done to facilitate the actions that occurr behind the scenes, and still achieve the expected results.
nurlord said:
I was advised to check this thread out in regards to my S2 lte having the same issue. That being said it hasn't worked. Can't see what I could be doing wrong. As far as i can tell the only thing that was even slight unclear is whether or not to delete the original files int he INF folder as the two files in the Toshiba folder have the same name as the ones in the INF folder. So I choose copy and replace. Was that incorrect?
Click to expand...
Click to collapse
yes
The download link in the original post is no longer valid.
Fixed Links
icelus1 said:
The download link in the original post is no longer valid.
Click to expand...
Click to collapse
Repaired and added another link in case one fails
Links are down. Please someone provide the said files.
This file does not exist, the access to the following file is limited or it has been removed due to infringement of copyright.
kaaniz said:
Links are down. Please someone provide the said files.
This file does not exist, the access to the following file is limited or it has been removed due to infringement of copyright.
Click to expand...
Click to collapse
RE-upped one and verified the other as working. 6/8/2013
this not works on my S4 ... I do all but NOT !! :crying:
Not working 29/12/2016
To establish connectivity, I would download the universal Samsung USB drivers or install Kies/SmartSwitch and use the original Samsung USB cable on a USB 2.0 port.
Can't download the files off that site, as well as I can't access my I535PP at all. I've tried everything, and at one point kies said my device wasn't supported yet it's on the list... Idk what to do...
Edit: Kies specifically says unsupported device when it goes to connect to it, and says to use smart switch but that wouldn't work either.
Hello....I bricked my I927 when I accidently formatted my efs partition when using EFS professional .....my phone boots in download mode.....but only boots till samsung logo screen.....I tried various things like installing stock GB and ICS through odin and installing custom firmware but phone boots onle till samsung logo and then lights up with sone stange colored thin lines and screen goes off.....In TRWP I get a "unable to mount preload" error whenever I try to install somethiing.....I suspect that the EFS partiton is corrupted and needs to be repartioned....I had backupped the efs folder when my phone was working before.....its in a tar format.....I read somwhere that someone made a recovery.zip out of his backedup EFS.IMG and flashed it with CWM solved his problems which were exactly similar to mine.....can somebody on the forum make a recovery.zip for I927 with update binary and script so that I can add the backedup EFS image to it and flash it with CWM? Please.....this would also help many others who are facing similar issues.....and also what do I do regarding the "unable to mount preload" error? I need to repartition and tried to install hemdall.....but get the common .dll error even after following all the instructions and installing C++ 2010.....
Hi, k one thing after the other.
Do you have repartitioned anything?
Do you have adb in place and does adb works when in TWRP?
The easiest thing would be to connect by adb then mount /efs and then restore the efs backup. The good is that you will have a good chance to recover your device. Maybe you need to reformat /efs but that depends.
Which timezone do you live? Maybe a Teamviewer session would be helpful?
.
Thank you for your reply sir...
THANKS FOR THE REPLY SIR....YES I WAS ABLE TO GO INTO CWM RECOVERY AND CONNECT THE PHONE WITH MINIMAL ADB FASTBOOT.....AND AFTER SPENDING ALMOST 2 DAYS CONTINUOUSLY TRYING TO FIND THE PROBLEM USING GOOGLE, I TRIED DIFFERENT COMMANDS ON ADB TO GET EFS BACK OJ THE PHONE....BUT WITH NO SUCCESS...... MY EFS BACKUP IS IN TAR FORMAT......IT WAS MADE USING GALAXYSIMUNLOCK BY SPOCKY.....I LATER TYPED IN 'ADB MESG'.....OR SOMETHING SIMILAR TO THAT COMMAND, AND FOUND OUT THAT ALL THE PARTITIONS ON mmcblk0 were mangled up with strange letters.....for eg, p1, p2, p3 and so on had strange characters written next to them.....SO I TRIED TO RE-PARTITION THE WHOLE THING WITH SDPARTED......AND IT RE-PARTIONED THE SYSTEM (AROUND 7000MB).....MMCBLK01 (AROUND 500MB).....AND ANOTHER THING I CANT REMEMBER NOW.....BUT WHEN IT FINISHED THE JOB, IT GAVE ME A mmcblk02 ERROR.....AND WHEN WHEN I CHECKED MY PHONE ON CWM SCREEN, IT GAVE ME A LIST OF CACHE ERRORS.....AND WHEN I SWITCHED OFF THE PHONE AFTER THAT IT REFUSED TO POWER ON.....IT WAS NOT EVEN GOING INTO DOWNLOAD OR RECOVERY MODE.....BATTERY HAD ENOUGH POWER....SO ITS NOT BATTERY FAULT......I SUPPOSE THAT SINCE THE PARTITIONS WERE FORMATTED THE PHONE BECAME COMPLETELY DEAD......CAN YOU TELL ME IF THERE IS ANY WAY WHERE I COULD GET THE COMPUTER TO RECOGNIZE MY PHONE USING A 'DEAD PHONE USB FLASH' OR SOMETHING.....AND THEN FLASH A BLANK BOOTLOADER AND THEN WRITE CWM?
I LIVE IN INDIA SIR.....+5.30 GMT.....I DO NOT KNOW ANYTHING ABOUT TEAMVIEWER.....IS IT AN ANDROID APP? CAN YOU EXPLAIN MORE IN DETAIL SIR?
PLEASE LET ME KNOW HOW TO GET THE COMPUTER TO RECOGNIZE THE PHONE AGAIN......
Well.. that sounds not that good...
Teamviewer (www.teamviewer.com) is an easy to use and free remote control software for your PC (it runs on both Linux and Windows). We could do a remote control session if you like. I can try to help but cannot promise anything.
I live in Germany: GMT +1. Send me a PM if you want to give that a try. Next Monday. Tuesday or Thursday would be possible on my site. At least for getting a short overview.
.
Thank you sir,
Thanks for the reply Sir.....I believe using teamviewer requires a internet connection with good amount of data.....I have an extremely slow 2G internet connection here in India.....I searched google to find some solution for the bricked I927......and came across many posts where people have used the 'unbrick.img' which was specifically made for their samsung phone models on their SD cards to resurrect their dead phones.....The method involves creating a 'unbrick.img' with emmc files extracted from another working I927 and then writing the image on an external SD card with some linux commands or win2image software and then inserting the SD card into the dead phone and switch it on by which it goes to download mode.....once in download mode I can flash CWM or TWRP and also flash stock firmware through odin and recover the phone.....Since your a developer who is well versed in things pertaining to this, can you make a unbrick.img file for the I927 and upload it here Sir? It will be very helpful for others also on the samsung glide subforum, as there is no proper 'hard unbrick' thread for the glide on xda......Ill be very grateful and thankful to you for all your help Sir.....
alvcross said:
Thanks for the reply Sir.....I believe using teamviewer requires a internet connection with good amount of data.....I have an extremely slow 2G internet connection here in India.....I searched google to find some solution for the bricked I927......and came across many posts where people have used the 'unbrick.img' which was specifically made for their samsung phone models on their SD cards to resurrect their dead phones.....The method involves creating a 'unbrick.img' with emmc files extracted from another working I927 and then writing the image on an external SD card with some linux commands or win2image software and then inserting the SD card into the dead phone and switch it on by which it goes to download mode.....once in download mode I can flash CWM or TWRP and also flash stock firmware through odin and recover the phone.....Since your a developer who is well versed in things pertaining to this, can you make a unbrick.img file for the I927 and upload it here Sir? It will be very helpful for others also on the samsung glide subforum, as there is no proper 'hard unbrick' thread for the glide on xda......Ill be very grateful and thankful to you for all your help Sir.....
Click to expand...
Click to collapse
Ok I have made one. It want to say it was VERY hard to find the correct instructions to do so and therefore I'm absolutely not sure if that will work for you!
Test it if you like but again: I have no idea if that would damage anything more than it is now!
See --> http://forum.xda-developers.com/cap...od-unbrick-debrick-hard-bricked-i927-t3285505
If it worked for you (would be like a miracle) then please report back!
If it does NOT work for you please report back, too!
thanks
xdajog
.
UPDATE:
Besides the link I posted --> Could you please also try the following:
1) Power on your device and directly after that:
2) Press and hold down Vol Up + Vol Down (both the same time)
3) You should see a warning message like the attached one which is the APX mode
4) you need to release the vol buttons immediately after you see the APX mode otherwise it will continue to the non working download mode.
Does teamviewer require internet connection with a lot of data?
Thanks for the reply Sir.....I believe using teamviewer requires a internet connection with good amount of data.....I have an extremely slow 2G internet connection here in India.....I searched google to find some solution for the bricked I927......and came across many posts where people have used the 'unbrick.img' which was specifically made for their samsung phone models on their SD cards to resurrect their dead phones.....The method involves creating a 'unbrick.img' with emmc files extracted from another working I927 and then writing the image on an external SD card with some linux commands or win2image software and then inserting the SD card into the dead phone and switch it on by which it goes to download mode.....once in download mode I can flash CWM or TWRP and also flash stock firmware through odin and recover the phone.....Since your a developer who is well versed in things pertaining to this, can you make a unbrick.img file for the I927 and upload it here Sir? It will be very helpful for others also on the samsung glide subforum, as there is no proper 'hard unbrick' thread for the glide on xda......Ill be very grateful and thankful to you for all your help Sir.....
alvcross said:
Thanks for the reply Sir.....I believe using teamviewer requires a internet connection with good amount of data.....I have an extremely slow 2G internet connection here in India.....I searched google to find some solution for the bricked I927......and came across many posts where people have used the 'unbrick.img' which was specifically made for their samsung phone models on their SD cards to resurrect their dead phones.....The method involves creating a 'unbrick.img' with emmc files extracted from another working I927 and then writing the image on an external SD card with some linux commands or win2image software and then inserting the SD card into the dead phone and switch it on by which it goes to download mode.....once in download mode I can flash CWM or TWRP and also flash stock firmware through odin and recover the phone.....Since your a developer who is well versed in things pertaining to this, can you make a unbrick.img file for the I927 and upload it here Sir? It will be very helpful for others also on the samsung glide subforum, as there is no proper 'hard unbrick' thread for the glide on xda......Ill be very grateful and thankful to you for all your help Sir.....
Click to expand...
Click to collapse
Uhm do you have read my above post??
.
1927 wouldn't boot.....Help.
Ohhhh Thank you.....thank you.....thank you for your kind reply Sir.....how good of you to take all your precious time to help me.....I greatly appreciate all your hard work Sir.....wonderful...*.I wanted to download your img file to try it out and when I read the reply of brother Bubor, that the I927 woudnt boot from the SD card when the bootloader is bricked, I was very disappointed. Like I said before, I have a very very slow internet connection with very less data left....and according to brother bubor's reply I doubt this will work....It looked like he was sure that it wont work....I tried to get into APX mode as the link that brother bubor posted had mentioned, but no luck, as the phone is not going into APX mode.....I remember that when I was trying to get to the APX mode the first time, the computer flashed a notification that the APX driver was not successfully installed.....but after that I tried the method more than a dozen times, but the computer was not recognizing the phone to go into APX mode.....Does the phone go into APX mode when the full internal phone system is formatted? I tried your second method on trying to get to APX mode, but nothing happens.....the computer is not recognizing the phone.....The battery had about 30% power in it when the phone got bricked 2 weeks ago.....Dont know if the battery drained all these days of not using the phone.....And even if I get to the APX mode, I have no idea how to proceed from there to repartition the internal phone system and get back download mode.....In the link that brother bubor posted the person who made the thread has made some files to be used when one gets into APX mode.....The PIT and emmc files which are necessary for repartitioning the system and getting the bootloader work are found in that zip file.....But that zip file is for the I9103 Galaxy R.....there isnt something like that available for the I927 yet.....And is brother bubor sure that the unbrick.img file wont work on the I927?
Give it a try with my unbrick image.
we all don't know.
.
xdajog said:
Give it a try with my unbrick image.
we all don't know.
.
Click to expand...
Click to collapse
Hi @alvcross: any update on this?
have you tried the SD card unbrick?
You said you cannot open the APX mode but what happens when you press the buttons for accessing the APX mode?
Try it even if you see a blank screen and then connect your Cappy with USB to your computer --> you should get a message about a missing driver or similar.
If that works I tell you how to proceed.
xdajog said:
hi @alvcross: Any update on this?
Have you tried the sd card unbrick?
You said you cannot open the apx mode but what happens when you press the buttons for accessing the apx mode?
Try it even if you see a blank screen and then connect your cappy with usb to your computer --> you should get a message about a missing driver or similar.
If that works i tell you how to proceed.
Click to expand...
Click to collapse
im so sorry that i was missing in this thread for a long time now sir.....i have had some issues at home and they have been sorted out lately.....yes sir.....i tried the sd card unbrick image....but my nothing happens.....when i try to hold volume up+power+home buttons and insert usb cable into my computer it says installing drivers and then says drivers failed to install....and nothing happens further.....can you help sir?
alvcross said:
im so sorry that i was missing in this thread for a long time now sir.....i have had some issues at home and they have been sorted out lately.....yes sir.....i tried the sd card unbrick image....but my nothing happens.....when i try to hold volume up+power+home buttons and insert usb cable into my computer it says installing drivers and then says drivers failed to install....and nothing happens further.....can you help sir?
Click to expand...
Click to collapse
Ok so you may try to install the special apx drivers now. Unfortunately I'm on vacation right now so I cannot upload them elsewhere. I come back to you next week.
Sent from my LG-H815 using XDA-Developers mobile app
xdajog said:
Ok so you may try to install the special apx drivers now. Unfortunately I'm on vacation right now so I cannot upload them elsewhere. I come back to you next week.
Sent from my LG-H815 using XDA-Developers mobile app
Click to expand...
Click to collapse
Oh yes Sir....Ill be waiting for the special apx driver package from you....Thank you so very much Sir.....God bless you.....
alvcross said:
Oh yes Sir....Ill be waiting for the special apx driver package from you....Thank you so very much Sir.....God bless you.....
Click to expand...
Click to collapse
No guarantee ! [emoji121]
Sent from my LG-H815 using XDA-Developers mobile app
xdajog said:
No guarantee ! [emoji121]
Sent from my LG-H815 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes Sir....I understand....
alvcross said:
Yes Sir....I understand....
Click to expand...
Click to collapse
Ok could you please try these driver package here: http://forum.xda-developers.com/galaxy-nexus/development/adb-fb-apx-driver-universal-naked-t1379875
Follow the instructions there for installing
The next step (if the driver would work for you) will be to flash a working PIT to your device to make sure you are using the correct partitions.
Afterwards we will flash the bootloader (may absolutely brick your device if not done correctly) and then --> if all goes fine --> you should be able to flash in download mode whatever you want to.
So it is still a long way to go and I need to check all the steps first before actually we can proceed.
That may take longer so do not expect that this will be something in the next days.. sorry.
Update:
If the above universal driver do NOT work for you: Test these one here View attachment apx_driver_samsung.zip
.
Thanks for the speedy reply Sir......Ill do as you said and let you know Sir......thank you.....thank you.....thank you Sir....
wooowwww......windows installed the drivers for the phone and it shows up as "NVIDIA usb boot-recovery for mobile devices." But when I open minimal adb and fastboot and type 'adb devices' the phone doesn't show up in the 'list of devices attached'....the line after 'list of devices attached' is just empty.....Also the phone doesnt show up in odin....what should I do next Sir?
alvcross said:
wooowwww......windows installed the drivers for the phone and it shows up as "NVIDIA usb boot-recovery for mobile devices." But when I open minimal adb and fastboot and type 'adb devices' the phone doesn't show up in the 'list of devices attached'....the line after 'list of devices attached' is just empty.....Also the phone doesnt show up in odin....what should I do next Sir?
Click to expand...
Click to collapse
nvidia apx isnt fastboot/adb device. You can found tool on nvidia site ( more info https://ac100.grandou.net/nvflash ), this tool can read and write whole flash.
Before you could use nvidia's tool, you must send an uniq blob to your phone. APX mode is useless without this blob.
This blob is uniq for every phone.
Hello everyone,
i bought the SM-P607T during my deployment in Afghanistan over Ebay USA . Spending my time there i tested the device and installed all updates etc. Back in Germany just my wife used it. Some weeks ago i noticed that an update to Lollipop should be avaible so i took the device to bring it up to date and i noticed some problems.
(Please note that i am just a noobie to flashing and rooting android and just follow guides to get to my goal.)
1. Device only loading while shut down. (After rooting and installation of TWRP it strangely started to load while on again even on PC USB connection)
2. Its not possible to connect the device with any PC.
3. OTA updates stop at around 27% and fail (KitKat 4.4.4)
[In TWRP shown
"E: Error executing updater binary in zip /data/fota/update.zip
E: Error installing zip file /data/fota/update.zip"]
Strange enough that the update info shown in android is Chinese Version
Tried to get some support with Samsung Europe but unfortunately they say US device US problem......
So what did i do in the meantime
1. Tried different loading devices frome Samsung and 3rd party companys. No changes.
2. Tried several different data cables to connect to 4 different PC. Even the one wich worked good with my Honor7 or the Galasy S4 mini dont do with the 607
3. My last try to fix this problem was to change the USB charging dock completely. Also didn´t change anything.
4. Now the step where i am currently stuck. I managed to root the device and install TWRP(v2.8.7.0) . Now tried to install Version P607TUVUBOI2 via SD Card.
Just followed diffenrent Guides on youtube and forums but im stuck at this.
Here is the message i got in TWRP recovery:
"Installing /external_sd/1/TMB-P607TUVUBOI2-20510930112901.zip
Checking for MD5 file....
Skipping MD5 check : no MD5 file found
Error flashing /external_sd/1/TMB-P607TUVUBOI2-20510930112901.zip
updating partition details......
Checked the *.zip on my PC there was just this file in: P607TUVUBOI2_P607TTMB1BOI2_P607TUVUBOI2_HOME.tar.md5
Downloaded the file from a different source again with same result
It would be very nice if someone is capable to help me with this and give me a hint what i possibly did wrong (Please do not mention not to buy in the US). For me it doesnt matter if i got a rooted or not routed version to install my main goal is to get rid of 4.4.2 . The problem with the not working USB connection is the biggest show stopper for me.
[email protected] said:
Hello everyone,
i bought the SM-P607T during my deployment in Afghanistan over Ebay USA . Spending my time there i tested the device and installed all updates etc. Back in Germany just my wife used it. Some weeks ago i noticed that an update to Lollipop should be avaible so i took the device to bring it up to date and i noticed some problems.
(Please note that i am just a noobie to flashing and rooting android and just follow guides to get to my goal.)
1. Device only loading while shut down. (After rooting and installation of TWRP it strangely started to load while on again even on PC USB connection)
2. Its not possible to connect the device with any PC.
3. OTA updates stop at around 27% and fail (KitKat 4.4.4)
[In TWRP shown
"E: Error executing updater binary in zip /data/fota/update.zip
E: Error installing zip file /data/fota/update.zip"]
Strange enough that the update info shown in android is Chinese Version
Tried to get some support with Samsung Europe but unfortunately they say US device US problem......
So what did i do in the meantime
1. Tried different loading devices frome Samsung and 3rd party companys. No changes.
2. Tried several different data cables to connect to 4 different PC. Even the one wich worked good with my Honor7 or the Galasy S4 mini dont do with the 607
3. My last try to fix this problem was to change the USB charging dock completely. Also didn´t change anything.
4. Now the step where i am currently stuck. I managed to root the device and install TWRP(v2.8.7.0) . Now tried to install Version P607TUVUBOI2 via SD Card.
Just followed diffenrent Guides on youtube and forums but im stuck at this.
Here is the message i got in TWRP recovery:
"Installing /external_sd/1/TMB-P607TUVUBOI2-20510930112901.zip
Checking for MD5 file....
Skipping MD5 check : no MD5 file found
Error flashing /external_sd/1/TMB-P607TUVUBOI2-20510930112901.zip
updating partition details......
Checked the *.zip on my PC there was just this file in: P607TUVUBOI2_P607TTMB1BOI2_P607TUVUBOI2_HOME.tar.md5
Downloaded the file from a different source again with same result
It would be very nice if someone is capable to help me with this and give me a hint what i possibly did wrong (Please do not mention not to buy in the US). For me it doesnt matter if i got a rooted or not routed version to install my main goal is to get rid of 4.4.2 . The problem with the not working USB connection is the biggest show stopper for me.
Click to expand...
Click to collapse
I really confused about your description? you using twrp to flash a .zip rom? then you mentioned about .md5 rom on your pc? how did you flash? With .md5 rom you need to use Odin to flash. Can you boot into download mode (hold down volume down + Home buttons then press power button)? If you able to boot to download mode, your pc should able to see the device and you would use Odin to flash the .md5 rom from your pc to the device. Also where did you download the .zip rom?