Related
I rooted my phone 6 months ago and 1 month ago it started restarting out of a sudden. Another problem was that it did not turn on the first time, so i had to get the battery out and try again to turn on the phone. When i saw that i decided to upgrade with the official Gingerbread Rom for the Desire. Now the problems started getting more and more serious. My phone remains stuck in the htc logo screen...it does not go into recovery and when i tried installing the initial ruu, to try to take it back to warranty it said that the bootloader version is not good. Any ideas how to solve this problem? I would really appreciate some help...
Maybe providing some info, like bootloader information, phone information....
Current Hboot is 1.02.0001, radio 5.17.05.23 and i wish to install RUU_Bravo_Froy2_UK_2.14.207.1_Radio_32.44.00.32U_5.09.05.30_2_release_144166_signed. I have tried to install the ROM by puting the rom file from the ruu on the memory card and renaming it as PB99IMG.zip. Once i turn on the phone in hboot, it loads the image and after 3 minutes is says "Main Version is older! Update Fail!". I have also tried to install the ruu by connecting it to the computer and booting the phone in fastboot. It said the current image version is 3.14.405.1 and the version I will install will be 2.14.207.1. After about 5 minutes in the install process it gets stuck in "Updating Signature" and after that the process stops and the following message is shown:
"ERROR[140]:BOOTLOADER VERSION ERROR
The ROM Update Utility cannot update your Android phone.
Please get the correct ROM Update Utility and try again."
I am currently quite desperate..
Your HBOOT is newer than the one you want to flash.
You nned to downgrade it, which means you have to S-Off your device with revolutionary.io AFAIK.
Then flash one of the HBOOTs from alpharev.nl (downgrader) - then you can flash the RUU.
davebugyi said:
Your HBOOT is newer than the one you want to flash.
You nned to downgrade it, which means you have to S-Off your device with revolutionary.io AFAIK.
Then flash one of the HBOOTs from alpharev.nl (downgrader) - then you can flash the RUU.
Click to expand...
Click to collapse
Can you please give me a more detailed instruction of how to do that? Where can i get revolutionary.io AFAIK from and how do i use it? Thanks in advance
Revolutionary (aka alpharev), from here
http://revolutionary.io/
Not sure where you would get an AFAIK, but As Far As I Know, it doesn't actually exist
777ace said:
Revolutionary (aka alpharev), from here
Not sure where you would get an AFAIK, but As Far As I Know, it doesn't actually exist
Click to expand...
Click to collapse
Can you please tell me how to s-off the phone if the phone cannot start?i tried in fastboot but the software on the computer didn't detect the phone...
You need to be running fastboot in the CMD.exe...
You need to follow the guide for ADB first, then you can use fastboot to flash a new image!
danycosarca said:
Can you please tell me how to s-off the phone if the phone cannot start?i tried in fastboot but the software on the computer didn't detect the phone...
Click to expand...
Click to collapse
Enable USB debugging and connect your phone to PC. Then start revolutionary.
Terepin said:
Enable USB debugging and connect your phone to PC. Then start revolutionary.
Click to expand...
Click to collapse
How can I enable USB debugging if my phone gets stuck at the HTC logo? sorry for being such a pain guys but i am not very experienced in this stuff..
Did you manage to solve it ? I have the same problem , stuck with the boot loop issue after flashing Official RUU 2.3 upgrade. Only have access to fastboot, can't use adb to downgrade.
ridhavm said:
Did you manage to solve it ? I have the same problem , stuck with the boot loop issue after flashing Official RUU 2.3 upgrade. Only have access to fastboot, can't use adb to downgrade.
Click to expand...
Click to collapse
do u previously had any aplharev hboot? like cm7/oxygen hboots?
andQlimax said:
do u previously had any aplharev hboot? like cm7/oxygen hboots?
Click to expand...
Click to collapse
Yes, I had s-off with alpharev. The problem started with boot loop on alpharev screen. I flashed amoled RUU by mistake and had slcd brick.
Now I have installed the correct RUU but still either get stuck on boot loop or on HTC screen. Wonder if the system partitions are screwed up or if they can be restored without adb or s-off.
i did not manage to do anything. all i want to do is to put back the initial ruu so i can take the phone back to warranty. But i don't know how to downgrade hboot.
can anyone please tell me how can i downgrade my hboot? The biggest problem is that i cannot enable usb debugging because my phone is stuck with the bootloop.
danycosarca said:
How can I enable USB debugging if my phone gets stuck at the HTC logo? sorry for being such a pain guys but i am not very experienced in this stuff..
Click to expand...
Click to collapse
Boot into Fastboot and then run RUU. Setup should see it.
I managed to reinstall the official Android 2.3 RUU but the problem is that i want to install the RUU_Bravo_Froy2_UK_2.14.207.1_Radio_32.44.00.32U_5.09.05.30_2_release_144166_signed RUU. From what i have been told, i firstly have to downgrade hboot. Can anyone give me some detailed steps of how to do this?
If I were you, I'd S-OFF with revolutionary, flash recovery and flash a ROM.. when you're S-OFF, there is a way to downgrade... I just haven't got time to search now sorry
That's from my understanding that you re-did the 2.3 RUU and your phone now works.. right?
Unfortunately the phone doesn't start now either
but did it work before? have you tried leaving it for about half an hour and tried turning it on again? (I've seen faults like that). If not try the RUU again, then S-OFF - which makes life SOOOOOOO much easier
After breaking my previous desire i got a new one from insurance past friday. I s-off and rooted it with revolutionary and ran the alpharev cm7 r2 partition table. All went fine and i installed the CM 7.2 RC rom and started downloading all my apps and stuff.
All seemed fine untill i shutdown my phone last night and when booting it up this morning it doesn't boot up into anything. I can only get into Hboot and fastboot. I've tried booting into recovery but it gets stuck on the boot screen again.
Now i've read the Q&A troubleshooter posted above here and i have already tried reflashing recovery, which sadly still didn't boot after the reflash.
Now i'm completely stuck on what to do and have been searching for over an hour now.
I've read i could do a RUU for my phone, but seeing as alpharev has protection against that i'm not certain that would even help. What would be the best solution here to get my phone working again. (and if possible with the current data on it , i hadn't made a backup of the full install yet)
Edit: some extra info
Hboot 6.93.1002
Bravo PVT3 S-off
radio 5.11.05.27
CM 7.2 RC
clockwork, not sure newest version for desire afaik
Did you try to remove battery?
yes, seeing as that is the only option right now to turn my phone off .
I also ran fastboot oem gencheckpt to force boot into recovery. The phone got stuck at htc splashscreen. I posted the cmd image information in this post.
when i pulled the battery to shut down the phone, the cmd gave and "error, to many links"
edit:
i ran the alpharev downgrade image to overwrite my hboot and see if i could get into recovery after reflashing that aswell. Sadly this didn't work and after flashing both it still gets stuck at the htc splash screen
i ran the downgrade hboot again and will not try to fix it with a RUU
hmm, the phone is still recognized by the pc, but i have a black screen and can't get it to display anything. did i use a bad ruu or? I"m really confused now :|
after looking in the troubleshoot again i tried to flash the bravo stock from alpha rev, but i'm getting a FAILED <remote: signature verify fail>
well seeing as i most likelly need a goldcard now and don't have another android device laying around i will have to continue this tomorrow or tonight.
if ANYBODY has any advice everything is really appriciated!
what RUU did you flash?
if it was under 2.xx that means you did slcd brick have look here
flash bravo stock from alpharev, then run (if you have a goldcard) the 2.2 WWE RUU, or your carriers RUU (make sure it's the latest one)
Check shipped-roms.com
i think i ran this RUU
RUU_Bravo_HTC_Europe_1.15.405.3_Radio_32.30.00.28U _4.05.00.11_release_121865.exe
which i got from this post, which i now see is terribly out-dated xD.
I got my phone from vodafone in Holland, and i just saw an RUU for bravo that was shipped by vodafone UK which also supports the same radio as mine. Is it a safe bet to use that one for the recovery process?
I wasn't able to run any images right now from fastboot for some reason so i will indeed need to make a goldcard. Will do so tomorrow and report back if i've had any succes.
Thanks for the advise!
OK, so i'm a bit confused by that guide i'm afraid...
I've noticed that in step 4 that i'm unable to enter recovery (no surprise seeing as i was unable before the RUU).
I can boot in to fastboot and hboot i think seeing as i get the "device connected sound" in windows. When i then enter ADB devices or fastboot oem gencheckpt it gives me some information, which can be seen in the screenshot.
What i'm now confused about is, do i still need to make a goldcard, and if so how? I tried running that goldcard creater software but it couldn't pull a CID. Should i create a goldcard by just using a phone of my friend (desire s :|)? Or is it possible to just run the right RUU straight away seeing as i can connect to hboot and fastboot, let that run and when that is finished use revolutionary to root my phone agian.
Attached is the cmd for fastboot oem gencheckpt and adb devices, although normally the fastboot oem gencheckpt finished with a "FAILED <status read failed<too many links>>
Gimme bootloader information, also what state is the phone in now, and what have you tried so far. (quick summary)
My bad just read you last posts.
Try the Vodafone RUU, it should work, don't see why it shouldn't. If that fails, make a goldcard with your friends Desire S, and flash the 2.2 WWE RUU.
If that fails then use the 2.3 RUU.
Ah great!!! I ran the vodafone ruu and atleast now i'm getting fastboot and hboot displayed again.
I'll see how far i can get on my own now. Thanks alot for all your help
Darn, aren't there yet...
I can now get into fastboot and hboot WITH it being displayed so that is already a big plus. However i'm still on a off partition format so i need to flash that back to the original partition format.
I'm S-ON right now so i can't do it through fastboot.
So i made the goldcard through my friends phone and place a PB99IMG.zip containing the alpharev bravostock on the goldcard.
When i then boot into HBOOT it gives me the reading PB99IMG.zip but doesn't give me an option to run the update afterwards. I then checked with the RUU i ran from my pc and created an PB99IMG.zip of that and let it run from HBOOT thus checking if the goldcard was functional. This worked perfectly apart from the partition table being screwed.
How can i now either install recovery from my goldcard while being S-ON or how can i succesfully run the bravo_stock image from my goldcard?
edit: I know i could use the old s-off trick from alpharev but i would prefer to use revolutionary instead seeing as it's more up to date...
k i think i know what to do.
i'll just create a bootable USB with the 1.8 hboot from alpharev on it. S-off my device and restore the partitions to stock.
Then run the RUU again so that my phone returns to stock sense and S-on.
After that i should be the basic root process all over again by running revolutionary etc right?
If you're S-ON. You DO NOT need to touch the hboot, and you can't anyway.
If you've got a goldcard just try the WWE RUU. And if that doesn't fix it then the 2.3 RUU.
That's all you need to do. NOTHING else.
The 2.3 RUU (the vodafone one i downloaded) doesn't work.
I don't think any RUU will work for my seeing as i'm still on the CM 7 r2 partition layout instead of the original sense layout (a little mistake i made when running the first faulty RUU). I'll try to run the WWE RUU first, but i don't think it'll achieve anything.
If i would now run the alpharev 1.8 hboot from a bootable USB it shouldn't put my device at risk right? :|
Edit:
i'm actually getting CID incorrect from the WWE RUU from the troubleshoot thread and from another WWE RUU i downloaded from shipped-roms.com
edit2:
alright, i tried 2 WWE RUUs, which when ran from my PC give me ERROR[131]: customer-ID error and a CID incorrect when done from my goldcard... i also tried alpharev hboot 1.8 but that didn't work either for the obvious reason that you need to boot into android and enable usb debugging and the WWE RUUs for i do not know what reason .
Damn i thought i had figured it out before going to college but aparently i was wrong >.<
i don't know if it's relevant but when i try to boot normally i get the HTC splash screen and it vibrates 7 times in a row...
So i think my goldcard might not be as golden as it should be. Should i try it with my other microSD, the one that i actually use in my phone, an 16 gb kingston?
If so can i use the same goldcard.img or should i create a new one?
bortak said:
If you're S-ON. You DO NOT need to touch the hboot, and you can't anyway.
If you've got a goldcard just try the WWE RUU. And if that doesn't fix it then the 2.3 RUU.
That's all you need to do. NOTHING else.
Click to expand...
Click to collapse
Dear god how many times do I just need to repeat myself.
Just download http://www.htcdev.com/process/legal_download/152 , boot into fastboot mode, then run RUU.exe
There is no vodafone 2.3 RUU, there is only one, and it is unbranded.
Elightos said:
So i think my goldcard might not be as golden as it should be. Should i try it with my other microSD, the one that i actually use in my phone, an 16 gb kingston?
If so can i use the same goldcard.img or should i create a new one?
Click to expand...
Click to collapse
If you still get CID error - you do not have a goldcard. Simple as that.
Elightos said:
The 2.3 RUU (the vodafone one i downloaded) doesn't work.
Click to expand...
Click to collapse
The 2.3 RUU always does something, if not for better than for worse.
ah right i'm sorry, i was a bit confused about that ruu because of some of the information displayed on shipped-rom.com. Prolly read it wrong or something.
Anyway the 2.3 RUU did indeed fix it! quite surprised after all this really didn't expect it! Thanks out a load and i'm sorry for touching a nerve there, it's just the first time doing anything like this so it was all a tad bit confusing!
Elightos said:
ah right i'm sorry, i was a bit confused about that ruu because of some of the information displayed on shipped-rom.com. Prolly read it wrong or something.
Anyway the 2.3 RUU did indeed fix it! quite surprised after all this really didn't expect it! Thanks out a load and i'm sorry for touching a nerve there, it's just the first time doing anything like this so it was all a tad bit confusing!
Click to expand...
Click to collapse
Lol don't worry about it, everyone starts of a newb I remember posting some scare stories of mine a while back of when I first started messing with my phone
I've been having a hell of a time trying to unroot my HTC One M8... It was an AT&T one I converted to Skydragon GPE, S-off. All the resources I try to use keep on failing somehow—anyone have suggestions? There's a million different tutorials on how to do it and none of them seem to work for me, getting really frustrated...
(I would link the below guides I've been trying to follow but I'm too new a user so it won't let me):
- The Unlockr guide: The Hassoon toolkit no longer exists.
- DroidViews guide: Everything's good until I try to restore the RUU image, then the executable fails with no explanation. Same when flashing the RUU from HTC's website.
- Restoring from a Nandroid backup in TWRP: Also never makes it through the entire process, I'd have to rerun it to see what the particular error was.
Ughhh is there any definitive set of steps I can take to actually restore to default settings? Preferably with the tampered flags not tripped, but honestly I don't even care at this point... Do I need to flash some stock AT&T HTC One M8 firmware or something before doing this all? Where might I be going wrong? I know it's vague but I'd love a solid walkthrough.
Thanks everyone
The simplest way would be to get an RUU from htc.com for AT&T, putting your phone in fastboot mode (power off, then pressing power+volume down, and selecting "fastboot"), and then simply launching the ruu. It should restore your phone to nearly being stock, except for your CID number and s-off. There are tutorials on how to change your cidnumber, however i am not sure how to turn s-off back to s-on.
http://www.htc.com/us/support/rom-downloads.html here you can find appropriate downloads
Ok, firstly, you might check out this thread: http://forum.xda-developers.com/showthread.php?t=2733523
None of the instructions require the use of anything beyond fastboot/adb. Also, make sure you put your CID/MID back if you changed them to run GPE. That isn't required to run Skydragon, but if you have altered them, put them back. Then rerun the RUU. Finally, since you are S-off, you can trivially fix any flags, so don't worry about that. (Running the RUU successfully will clear the modified flag anyway)
jshamlet said:
Ok, firstly, you might check out this thread: http://forum.xda-developers.com/showthread.php?t=2733523
None of the instructions require the use of anything beyond fastboot/adb. Also, make sure you put your CID/MID back if you changed them to run GPE. That isn't required to run Skydragon, but if you have altered them, put them back. Then rerun the RUU. Finally, since you are S-off, you can trivially fix any flags, so don't worry about that. (Running the RUU successfully will clear the modified flag anyway)
Click to expand...
Click to collapse
So I did this, starting from the Skydragon Sense 7 ROM:
made nandroid backup
flash 1.54.401.5 firmware
set cid to CWS__001
run RUU for the latest AT&T one. It says it will update from 1.54.401.5 to 2.6.502.16.
Result? Error 155 "Unknown Error", no other information.
Any ideas?
osdiab said:
I've been having a hell of a time trying to unroot my HTC One M8... It was an AT&T one I converted to Skydragon GPE, S-off.
Click to expand...
Click to collapse
Did you actually "fully convert" to GPE, or just flash Skydragon GPE?
What color is your hboot screen?
What hboot number, radio number?
osdiab said:
- The Unlockr guide: The Hassoon toolkit no longer exists.
Click to expand...
Click to collapse
The toolkit still exists. But it hasn't been updated in a very long time, and will therefore cause many many issues. So don't use the toolkit!
osdiab said:
- DroidViews guide: Everything's good until I try to restore the RUU image, then the executable fails with no explanation. Same when flashing the RUU from HTC's website.
Click to expand...
Click to collapse
Don't know what guide that is, or what RUU it tells you to use; but be aware that there are many RUU versions for the M8, and the RUU needs to be the proper one for your CID and MID. Also, Win7 or 8.1 is recommended (Win8 and especially Win10 will cause the RUU to fail).
redpoint73 said:
Did you actually "fully convert" to GPE, or just flash Skydragon GPE?
What color is your hboot screen?
What hboot number, radio number?
The toolkit still exists. But it hasn't been updated in a very long time, and will therefore cause many many issues. So don't use the toolkit!
Don't know what guide that is, or what RUU it tells you to use; but be aware that there are many RUU versions for the M8, and the RUU needs to be the proper one for your CID and MID. Also, Win7 or 8.1 is recommended (Win8 and especially Win10 will cause the RUU to fail).
Click to expand...
Click to collapse
hboot screen is white. hboot number is 3.19.0.0000. radio number is [email protected] I was using windows 8.1, though the computer I was using only has USB 3.0 ports (Apparently people say 2.0 is better?)
This is on the firmware that I was using for Skydragon, I can reflash the other firmware I had used for the failed RUU upgrade if that would be useful.
osdiab said:
hboot screen is white. hboot number is 3.19.0.0000. radio number is [email protected]
This is on the firmware that I was using for Skydragon, I can reflash the other firmware I had used for the failed RUU upgrade if that would be useful.
Click to expand...
Click to collapse
I'd leave it alone, and just try running the RUU.
osdiab said:
I was using windows 8.1, though the computer I was using only has USB 3.0 ports (Apparently people say 2.0 is better?)
Click to expand...
Click to collapse
Yes, folks have reported issues with RUU and USB 3.0. You can always try, the worst that will happen is the PC won't be able to talk to the phone.
Another user mentioned you can "disable" USB 3.0 in settings, but I'm not familiar with that.
redpoint73 said:
I'd leave it alone, and just try running the RUU.
Yes, folks have reported issues with RUU and USB 3.0. You can always try, the worst that will happen is the PC won't be able to talk to the phone.
Another user mentioned you can "disable" USB 3.0 in settings, but I'm not familiar with that.
Click to expand...
Click to collapse
OK, I've tried doing it on a computer that has USB 2.0 ports and once again, no go.
Trying to run the Developer/Unlocked RUU on HTC's website, it's stuck forever at 0/7 sending.
Trying to run the AT&T one, it errors out with a 155: Unknown Error message as soon as it boots to RUU mode.
Any other thoughts?
osdiab said:
Trying to run the AT&T one, it errors out with a 155: Unknown Error message as soon as it boots to RUU mode.
Click to expand...
Click to collapse
I think this means you need to relock your bootloader (required to RUU with s-on).
So as you might have heard, android 6.0 is out on htc one m8 now, and as usual i wanted to update. I got my device into a bootloop after unrooting and downloading some OTA's online, and messing around with stuff that didnt work.
But now im rly stuck, when i boot my phone up it automatically boots into bootloader. I cant flash a boot.img because i get a signature verify fail. Updating with RUU returns error 130 and factory resetting doesnt do anything at all(in fastboot and in recovery). plzzzz help
Hi,
Did you try to reflash your recovery and try to install another rom like ViperOne M8? Or if you want i can send you the stock ROM Android 6.0
Laurens54321 said:
So as you might have heard, android 6.0 is out on htc one m8 now, and as usual i wanted to update. I got my device into a bootloop after unrooting and downloading some OTA's online, and messing around with stuff that didnt work.
But now im rly stuck, when i boot my phone up it automatically boots into bootloader. I cant flash a boot.img because i get a signature verify fail. Updating with RUU returns error 130 and factory resetting doesnt do anything at all(in fastboot and in recovery). plzzzz help
Click to expand...
Click to collapse
You seem to be going about things rather haphazardly:
1) Not sure exactly what "some OTAs" refers to. But there is typically only one OTA that will properly work. That being the one that is for your CID (carrier version) and for the next software version (can't skip any).
2) Along the same lines, you can't just flash any RUU. It has to be for your CID and MID (Error 130 usually means wrong MID), and equal or greater version number than main version on the phone (no "downgrading" unless you have s-off).
3) "messing around with stuff that didnt work" doesn't tell us anything about how you got to the current condition. You need to be specific and detailed, if you want us to be able to tell what you did, and how to recovery.
4) You can't unroot and OTA, it has to be a stock (never rooted) ROM and stock recovery.
5) boot.img in itself probably won't help your situation. And signature verify fail usually means you tried to flash without the bootloader unlocked (which won't work).
Are you S-OFF? If so, this works;
1) Download 0P6BIMG.zip. You'll have to Google
"dottat @ XDA M8 RUU" to get the file as I haven't
made at least ten posts here and can't post links yet.
2) Place 0P6BIMG.zip on an SD card formatted fat32 ONLY.
3) Boot your phone, allow HBOOT to recognize 0P6BIMG.zip
and follow the prompts.
RESULT: This will land you on STOCK kitkat 1.55.605.2
pre-rooted with stock recovery.
----------------------------------------------------------------
CREDIT: dottat @ XDA
I have an s off unlocked phone. Any of you know if its possible to downgrade to an older update? The new us update is affecting my calls and signal so i need to go back.
Just run the old RUU exe and you'll be set.
Sent from my HTC 10 using Tapatalk
effortless said:
Just run the old RUU exe and you'll be set.
Click to expand...
Click to collapse
Depends. If his handset is s-on he can't "just" run the old ruu. With s-on you can't downgrade the bootloader to a lower version.
So it's either doable with s-off or look for the OS via a backup and try to restore that and run it on the new firmware.
Mr Hofs said:
Depends. If his handset is s-on he can't "just" run the old ruu. With s-on you can't downgrade the bootloader to a lower version.
So it's either doable with s-off or look for the OS via a backup and try to restore that and run it on the new firmware.
Click to expand...
Click to collapse
They state they have an s-off unlocked phone in their first sentence.
Sent from my HTC 10 using Tapatalk
I have HTC10 with s-off and trying to revert to stock with ruu and keep getting error message with wrong version.
pocutzz said:
I have HTC10 with s-off and trying to revert to stock with ruu and keep getting error message with wrong version.
Click to expand...
Click to collapse
Please post the error, so we can see it and help.
andybones said:
Please post the error, so we can see it and help.
Click to expand...
Click to collapse
So in the meantime i reflashed twrp and recovery and restored a backup.
But in the conclusion all i want now is to revert to full stock (i have no backup of that). Can i do that with s-off and bootloader re-locked? the reason that i want to do that is to recieve further updates ota. The reason i did all this to my phone was because the 4g was working when it wanted (not only 4g but mobile data in general). Now i'm thinking of reversing to stock, maybe future updates will solve this or to send the phone back for waranty.
So i need to flash stock, can you guide me from this point to achieve that?
My current software is 1.95.401.3, the phone was unlocked but not developer edition.Cid is HTC__34.
Help me what to do next and i will do one by one until i succeed (sry for my bad english)
@pocutzz you need SuperCID. In download mode, connect phone to pc and open a command window on your computer, type out "fastboot oem writecid 11111111" (I advice you copy and paste this but without the quotation marks), and then you will gain SuperCID. With this, you will be able to install any firmware/RUU regardless of CID.
@ OP, if you want to downgrade, since you are S-OFF there is no need to relock bootloader. As long as your have SuperCID you can downgrade to any firmware just like that. Download RUU and run it.
ZeroInfinity said:
@pocutzz you need SuperCID. In download mode, connect phone to pc and open a command window on your computer, type out "fastboot oem writecid 11111111" (I advice you copy and paste this but without the quotation marks), and then you will gain SuperCID. With this, you will be able to install any firmware/RUU regardless of CID.
@ OP, if you want to downgrade, since you are S-OFF there is no need to relock bootloader. As long as your have SuperCID you can downgrade to any firmware just like that. Download RUU and run it.
Click to expand...
Click to collapse
But after i do super cid what version do you recomend to flash? it will be full stock after? i will be able to recieve updates ota?
pocutzz said:
But after i do super cid what version do you recomend to flash? it will be full stock after? i will be able to recieve updates ota?
Click to expand...
Click to collapse
if you RUU you should still be able to receive OTA afterwards but don't count on me for that one as I've never restored back to stock before. You can search for previous HTC 10 RUUs on google, I recommend not going too far back and just going on the update before the 1.95 one (1.90 I think). Not every version has an RUU so if you can't find an RUU you want, try and find an older version.
ZeroInfinity said:
if you RUU you should still be able to receive OTA afterwards but don't count on me for that one as I've never restored back to stock before. You can search for previous HTC 10 RUUs on google, I recommend not going too far back and just going on the update before the 1.95 one (1.90 I think). Not every version has an RUU so if you can't find an RUU you want, try and find an older version.
Click to expand...
Click to collapse
There is one on the htc website like unlocked/developer edition like 1.91 XXXX , think that will be ok?
pocutzz said:
There is one on the htc website like unlocked/developer edition like 1.91 XXXX , think that will be ok?
Click to expand...
Click to collapse
It should be fine, yes. Make sure you have SuperCID and remember that you do not have to relock your bootloader when running the RUU as you are already S-OFF
ZeroInfinity said:
It should be fine, yes. Make sure you have SuperCID and remember that you do not have to relock your bootloader when running the RUU as you are already S-OFF
Click to expand...
Click to collapse
i re-locked before i run sunshine for s-off. i will try to do that in a few minutes
i have done superCID, but before i try to flas the ruu, wanted to ask you, after that what remains? like s-off,root,twrp,custom recovery?
Okey so i did the superCID, in download mode it shows me the 1111111 but on the phone when i run CID Getter still says HTC__034 (that is how it suppose to show?), i copied from here like you said.Downloaded the ruu.exe from htc website,and when it runs it resets my phone to download mode,the bar goes instantly to 100% and the ruu installer says the 155 error,incorect version i think.
What do i do next?
Maybe MID problem?i've read something about it for HTC M8 i have mid 2PS620000. Maybe the ruu.exe on htc website is for US and i need EU?
Later edit: So i put the global variant with .401. in the sd card and it started to flash, i will se what is what...
pocutzz said:
i have done superCID, but before i try to flas the ruu, wanted to ask you, after that what remains? like s-off,root,twrp,custom recovery?
Okey so i did the superCID, in download mode it shows me the 1111111 but on the phone when i run CID Getter still says HTC__034 (that is how it suppose to show?), i copied from here like you said.Downloaded the ruu.exe from htc website,and when it runs it resets my phone to download mode,the bar goes instantly to 100% and the ruu installer says the 155 error,incorect version i think.
What do i do next?
Maybe MID problem?i've read something about it for HTC M8 i have mid 2PS620000. Maybe the ruu.exe on htc website is for US and i need EU?
Later edit: So i put the global variant with .401. in the sd card and it started to flash, i will se what is what...
Click to expand...
Click to collapse
S-OFF will never be wiped, if you have relocked then it will remain relocked state. Everything else is wiped and restored to stock including recovery, system, data, Internal Storage MIGHT BE WIPED I am not so sure.
if it shows SuperCID in download mode it should be fine. All you needed to do to get it was to execute that command line I posted before.
ZeroInfinity said:
S-OFF will never be wiped, if you have relocked then it will remain relocked state. Everything else is wiped and restored to stock including recovery, system, data, Internal Storage MIGHT BE WIPED I am not so sure.
if it shows SuperCID in download mode it should be fine. All you needed to do to get it was to execute that command line I posted before.
Click to expand...
Click to collapse
thank You for the info.i just flashed from sd card the 401 version, an got the updates,think everything is okey,i will write again after all is good. Ty very much
about 3 friends of mine have bricked htc 10 when trying to downgrade the firmware (Sprint, KKDI and unlocked variant all s-off) I want to ask if I can use the image to sdcard method to unbrick ???