Hi all
yesterday my i9195 recieved an update to JDQ39.I9195XXUBMJ7 but since then WIFI refuses to work.
Contactting Samsung on twitter they say to backup and update by wifi, duhhh.
Trying by pc, KIES says : doesn't support software upgrade
Even KIES3 does
So now i'm lost to fix wifi issue
Luckily i run on private Phone my note 2
Thnx for helping
rayblo said:
Hi all
yesterday my i9195 recieved an update to JDQ39.I9195XXUBMJ7 but since then WIFI refuses to work.
Click to expand...
Click to collapse
I am experiencing the same issue, same phone and rom i9195 JDQ39.I9195XXUBMJ7. Wifi works after reboot for about 10 minutes and then stops responding. It may stay connected for a few hours after it stops working, but the phone can't send data over it.
I have wiped data/factory reset the phone to no avail.
I read somewhere about a few people with other devices on 4.2 having troubles with AES encryption on their routers. Might be somewhere for us to start troubleshooting. The other option is to just try downgrading to the previous version.
Hello,
My Samsung galaxy tablet 10.1 2014 wifi addition (smp600) is not getting passed the encryption password page on bootup. I tried to wife everything and install a new rom and that did not work. I also tried to format the data and install rom and that did not work. Every time I try to enter the password it either reboots or sits in the android encryption logo. I have also tried different roms to see if it fails for each and they all fail. If somebody could teach me how reset the device so it isn't rooted or have twrp that would be great. Also I think it needs to be repartitioned but I'm not sure. Also I cannot find the United States stock firmware for the device. Without that I probably can't attempt to restore. I have not tried Odin. But i NEED the USA stock software!!! And i need and odin tutorial. Since it is a wifi tablet do I need to have the U.S. Firmwire??
Hi all i recently bought a no fault customer returned tab 3 7in SM-T210, Today I received my tab 3 and after the first boot I was offered an update, Build number KOT49H.T210XXBOA3, dated 22 jan 2015 at 110mb.
After the update had finished I was unable to connect to my WiFi, it would say connected but the settings app would freeze sometimes with the message that settings is not responding, if I do manage to get out of the settings I am unable to use the internet as all apps say no connection, even though the WiFi icon is showing as connected. I have also found that changing the screen off time to 1 minute cause's the device to soft reboot ( No Samsung galaxy tab 3 screen / bootloader )
I have tried doing factory reset but that didn't help,
Could flashing the full 828mb stock ROM via Odin possibly fix these issues?
And if I do use Odin to flash stock my warranty should remain?
Sorry for the long winded post, and thanks in advance for any advice given
Sent from my moto g using XDA Free mobile app
plewis1981 said:
Hi all i recently bought a no fault customer returned tab 3 7in SM-T210, Today I received my tab 3 and after the first boot I was offered an update, Build number KOT49H.T210XXBOA3, dated 22 jan 2015 at 110mb.
After the update had finished I was unable to connect to my WiFi, it would say connected but the settings app would freeze sometimes with the message that settings is not responding, if I do manage to get out of the settings I am unable to use the internet as all apps say no connection, even though the WiFi icon is showing as connected. I have also found that changing the screen off time to 1 minute cause's the device to soft reboot ( No Samsung galaxy tab 3 screen / bootloader )
I have tried doing factory reset but that didn't help,
Could flashing the full 828mb stock ROM via Odin possibly fix these issues?
And if I do use Odin to flash stock my warranty should remain?
Sorry for the long winded post, and thanks in advance for any advice given
Sent from my moto g using XDA Free mobile app
Click to expand...
Click to collapse
Why is t210 so many issue? seriously!?
If one thing i need to clarify that doing any custom modification on the device will spoil your warranty. However if you did firmware stuff from kies will not remove your warranty. I would choose to flash into new firmware by using odin. But if your case you can do a factory reset then followed by kies and see if it is working. If it is not, download stock firmware from the net and flash it with odin.
thanks @Jacker31 for the response, i know about voiding warranty there is no custom software on it YET lol, only just got it out of the box, i am new to Samsung devices so i will do some research into kies, just don't want to void my warranty trying to sort it out.
plewis1981 said:
thanks for the response, there is no custom software yet only just got it out of the box, i am new to samsung devices so i will do some research into kies
Click to expand...
Click to collapse
Kies are easy and ready to use after its installation.
check out this link for more info:
http://forum.xda-developers.com/showthread.php?t=2261153
I don't know if it's the same problem with my wife's tab t210. when you turn on the wifi it connects but around many seconds, the wifi icon is gone. and in settings the wifi freeze. i've done rebooting, restore factory settings but it didn't fix the problem. but when i try it to connect via my phone tethering it connects and the wifi icon stays. i check the tethering settings it was put on wpa2, but on my router it was just on wpa. So i change it to wpa2 and the problem on my wife's tab is gone.
bukog25 said:
I don't know if it's the same problem with my wife's tab t210. when you turn on the wifi it connects but around many seconds, the wifi icon is gone. and in settings the wifi freeze. i've done rebooting, restore factory settings but it didn't fix the problem. but when i try it to connect via my phone tethering it connects and the wifi icon stays. i check the tethering settings it was put on wpa2, but on my router it was just on wpa. So i change it to wpa2 and the problem on my wife's tab is gone.
Click to expand...
Click to collapse
sounds like ur device does not support wpa correctly.
Hi guys, so I installed kies3 but when I click the firmware upgrade button I get this message 'SM-T210' dose not support initializing. even though i had USB debugging selected. I also tried while the device was unplugged by entering the model and serial numbers but got the same response.
If I flash a stock firmware by Odin will the device log it on the flash counter? as it came with a 12 month warranty and i will send it back if i cannot fix it myself.
Sent from my moto g using XDA Free mobile app
plewis1981 said:
Hi guys, so I installed kies3 but when I click the firmware upgrade button I get this message 'SM-T210' dose not support initializing. even though i had USB debugging selected. I also tried while the device was unplugged by entering the model and serial numbers but got the same response.
If I flash a stock firmware by Odin will the device log it on the flash counter? as it came with a 12 month warranty and i will send it back if i cannot fix it myself.
Sent from my moto g using XDA Free mobile app
Click to expand...
Click to collapse
You should send it back because of the warranty, anything could happen (I meant for the warranty) if we do something.
I have upgraded from Jelly Beans to Kitkat 4.4.2 via regular OTA upgrade provided by Samsung on my Samsung Note 8" GT-N5110. Since then I am unable to use Wifi on it. My device is NOT rooted and is running on original Samsung software upgraded via OTA.
I have tried to clear cache and then factory re-set as well and still can't get the WIFI button to sometime even select available WIFI networks. So issues I am facing are summarized below"
1. After factory re-set and clearing cache via Power+Vol Up option, when I tried to setup from scratch, WIFI would not turn on at all meaning device would not be able to scan for available WIFI network or would do so but after long time and if it does show available Networks and I select my home network with required security (WPA2) and password, it would show status as " Saved" rather than connecting to this network. The device would not connect to selected network even after multiple tries.
2. When trying to turn wifi on, device would not show "WIFI" button to Green but instead would stuck at "Grey" color for ever unless rebooted and re-tried many times. The grey would turn green when selecting advanced option or tabbing thro' back button but would not scan available networks then. If it would scan thro' Networks, it would just save selected network even with correct security option and password for it.
WIFI not turning on has made this device a piece of junk for any meaningful use. Any suggestions/ help would be highly appreciated. Again please note, my device is UNROOTED and running on original firmware provided by Samsung via OTA upgrade.
Hi XDA Gurus,
Any one can direct me to right section that has solution for this issue if it is a repost? or help me get an answer?
Thanks,
R
Anyone find an answer to this?
I ahve had no luck, same exact issue, anyone have any ideas? thanks
shahrit said:
I have upgraded from Jelly Beans to Kitkat 4.4.2 via regular OTA upgrade provided by Samsung on my Samsung Note 8" GT-N5110. Since then I am unable to use Wifi on it. My device is NOT rooted and is running on original Samsung software upgraded via OTA.
I have tried to clear cache and then factory re-set as well and still can't get the WIFI button to sometime even select available WIFI networks. So issues I am facing are summarized below"
1. After factory re-set and clearing cache via Power+Vol Up option, when I tried to setup from scratch, WIFI would not turn on at all meaning device would not be able to scan for available WIFI network or would do so but after long time and if it does show available Networks and I select my home network with required security (WPA2) and password, it would show status as " Saved" rather than connecting to this network. The device would not connect to selected network even after multiple tries.
2. When trying to turn wifi on, device would not show "WIFI" button to Green but instead would stuck at "Grey" color for ever unless rebooted and re-tried many times. The grey would turn green when selecting advanced option or tabbing thro' back button but would not scan available networks then. If it would scan thro' Networks, it would just save selected network even with correct security option and password for it.
WIFI not turning on has made this device a piece of junk for any meaningful use. Any suggestions/ help would be highly appreciated. Again please note, my device is UNROOTED and running on original firmware provided by Samsung via OTA upgrade.
Click to expand...
Click to collapse
If you don't mind... try odin 3.09, flash philz recovery, factory reset for wipe clean for fresh install option, and boot to downloader. Flash a firmware from sam mobile, or the get a usa version in the development section.
That should flash a clean install after a wipe
Hello guys!
I have weird problem!
I got broken OP3 A3003 (64gb model) and repaired it. It works perfectly but there is just one annoying fault that i cant seem to find answer to. The WiFi will not reconnect to saved hotspots after i toggle it off and back on again. Everytime i must give the password again and again. after i connect it works perfectly an no hiccups at all. just the reconnecting not working. I can see the saved network in the list but deleting it does not work. I havent yet rooted, im on latest stock and the bootloader is locked. Tried factory reset but same problem occurs.
Searching web and Oneplus forums pointed that there is couple others having same problems but no solution from anyone.
Do anyone have had any of this kind of problem and how did you solve it?
I like Oxygen OS itself but rooting is a must! after i can give logs or stuff if needed!
Update to latest oxygen os or open beta, if updating won't fix your problem then perform a factory reset.
Like I said I tried factory reset but did not help unfortunately I updated to open beta 38 last night but did not help either. 'm gonna try open bootloader and flash the firmware again completely and see.