Dear forum,
my friend has a zenfone z00d with 8gb/2gb. With lineage os, it is quite perfect, hybrid storage solves the disk problem and the Rom is very fast. However she has a very big problem: with Wind (Italian operator) she has to periodically reboot the device because it continuously says "no-signal"; after a reboot no problem for some time. Another ?friend with op1 and lineageos has similar problem with the same operator, so I think that this operator has some incompatibility with this rom.
Have you got any suggestion to solve the problem or you can show me a Rom with difference base (aosp for example) with the hope that the problem disappear?
thanks
i'm interested to solve this problem, subscribe this 3d and hope to find a solution
i'm in the same situation, lineageos with italian wind sim.
G.
Related
i have just bought one 2nd-hand excalibur.It seemed normal at first but then when I got home, I access communication but I cant not turn on the wifi at any mean since there is no wifi icon on the screen. That's so helpless. Also, something weird that although i have the brand name of T-mobile but my rom is dopod c720 and it appear chinese word on the greeting screen everytime i boot up. I wondered that it is a fault rom, or it is because of my hardware. If it is cuz of my rom, can you guys show me how to modify or doing any mean to change to another rom. I am really annoyed with that chinese rom. Though i tried many way of flashing another rom but it always gives out the message of invalid model. Any help then. plz plz plz you guys. Really urgent. I am a bit regret of buying this "smart phone".
is it no way to help my belove c720. Or am I being fooled by buying the fake stuff
You might want to try to Hard Reset your device and see if the Wifi would be fixed..
How to Hard Reset?
Start - Accessories (Expert) - Clear Storage - Enter 1234
Hard Reset will wipe out all your data residing on the phone memory, so better backup first before proceeding. Data on the the Storage Card will remain intact and safe with a Hard Reset.
the hard reset was also tried out ages ago. But it seems not work
Just my 2 cent. in China they have no Wi-Fi version of Excalibur sold everythere. It appears that your device has been flashed with Chinese version . You shoud consider flashing your handset to firmware with known WI-FI support in it. I hope it helps.
P.S. Lets hope that your device didn't come from China and has no Wi-Fi chip in it at all. What is the model number of your handest? You can locate this information under the battery.
Good luck!
so i have to remove the battery first then look at the back of my excalibur. Then, which signal give me the information that it come from China or not. Does it have stuff like made in china or sthing like that. By the way, thx you guys very much for devotedly ansewred my questions. I'm newbie here so I need lots of help from u guys
Wi-Fi on the C720W
djlinh said:
is it no way to help my belove c720. Or am I being fooled by buying the fake stuff
Click to expand...
Click to collapse
Hello djlinh, I don't know if this helps you or not, but I bought my dopod C720W, (new) in Thailand and it comes with two languages that you can switch between, (English and Chinese). Just check your "SPACE" key to see if it has some Chinese letters, (in blue) on it. That's the way mine came. In any case my Wi-Fi worked fine with the original dopod WM5 ROM. I have since switched to the Russia, (WM6) ROM it working just as well, if not better. By the way I would recommend the Russia ROM . I've been using the Russia ROM for awhile now and to tell you the truth, I could care less if dopod comes out with an WM6 upgrade or not. I can't see it being any better than the Russia one. If you do go for the Russia ROM upgrade. I would suggest you read the various threads of this very helpful site and make some notes first. It will make things go a lot smoother for you. Cheers and good luck!
so can you guys get me a valid rom to flash. I tried to flash many of them but it became a failure. Can you do me a favor that give me a link work for my excalibur.
SecureGSM said:
Just my 2 cent. in China they have no Wi-Fi version of Excalibur sold everythere. It appears that your device has been flashed with Chinese version . You shoud consider flashing your handset to firmware with known WI-FI support in it. I hope it helps.
P.S. Lets hope that your device didn't come from China and has no Wi-Fi chip in it at all. What is the model number of your handest? You can locate this information under the battery.
Good luck!
Click to expand...
Click to collapse
I own a Dopod C720 which is the version without WLAN. I know that the C720W has WLAN. Is it really a matter of the chip or could it just be based on the firmware whether WLAN is enabled or not?
In addition, I wish to flash the C720 to an all English version. The current version on my C720 is the Chinese/English version. A limited number of applications still only appear in Chinese characters in the English setting. Can someone tell me which version I need and where to get it from(send it)? I downloaded some RUUs but it seems that does not do the trick. e.g. there is still the Chinese operator logo which I do not like.
Thanks
Joscha
First of all Hi to everyone. I have a problem with the latest build (the one from 13.06 - i believe it is the latest). This is the first time I install Android on TP2. I also installed Android on Touch Diamond but there I had no problems.
Now I will line up my problems:
1. I get the splash screen for 30 or more minutes - it is resolved now after deleting data.img and restarting.
2. I do not have network signal (I am on Orange), wi-fi or sound. If you can tell me what is wrong it would be of great help for me.
Thanks a lot guys.
Sorry if I posted wrong here, I am kind of new to this forum.
Me again. So I read on the forum about the second problem. The sound (in speaker) still does not work in this build. Regarding the network signal i had an extra line in my startup.txt (force cdma). After I removed it everything went fine. About the wi-fi problem it seem to be a WEP encryption issue.
Sorry again for starting a new post, maybe someone will find it usefull after all.
never mind
hi guys, i used leedroid latest ROM & Neophyte's latest & other custom ROMs.... but with all these ROMs i cannot connect to 3G/GPRS because my desire doesnt retrieve automatic configuration from the network....
BUT--- when i used CM nightly build latest, it retrieves network settings automatically, & i am ready to surf the internet the very next moment i install the ROM....infact the H icon appears immediately when i am still looking at the screen & thinking what r the changes,after flashing a ROM..... i am amused by this strange thing with all other ROMs except CM nightly build...
is there anyone who know what .apk is responsible for retrieving those settings from the network in custom ROMs ??? how can i rectify this issue with rest of ROMs as i like the interface of rest of custom ROMs, i am desperate to try out different things....
please anyone here guide me/ suggest me a solution pls.....
Ok guys, here is my problem. I've changed a lot of roms so far, and latest miui rom for desire, from their site, is the one I like the most. I've been using it for two months until today without any problem. Today I realized that I can not connect to the wifi network which is using protocol from the tittle. It is just keeps tryng to connect and fails. It is something released to this rom becouse I can use that network with all other roms (tryed today). Is there anything I can try that could fix this problem?
Of course , sorry for my bad english, I hope you can understand me.
Sent from my HTC Desire
Yesterday I bricked my brand new P8000(B) - the new version with Marshmallow 'out of the box' (and the new SIM slots etc...)
I tryed to reflash several stock- and custom ROM's but they don't work because they are made for the 'old' version and there must be major differences in the hardware. At the moment the main problem is that the LCD driver is wrong and the display shows only lines and blurry spots
The Phone was running on ROM "P8000_6.0_20160516" - this ROM is not available at needrom or bbs.elephone.hk even Google doesnt know
It would help a lot if some could supply the ROM "P8000_6.0_20160516" - thank you!
FrauHofrat said:
Yesterday I bricked my brand new P8000(B) - the new version with Marshmallow 'out of the box' (and the new SIM slots etc...)
I tryed to reflash several stock- and custom ROM's but they don't work because they are made for the 'old' version and there must be major differences in the hardware. At the moment the main problem is that the LCD driver is wrong and the display shows only lines and blurry spots
The Phone was running on ROM "P8000_6.0_20160516" - this ROM is not available at needrom or bbs.elephone.hk even Google doesnt know
It would help a lot if some could supply the ROM "P8000_6.0_20160516" - thank you!
Click to expand...
Click to collapse
I can do nothing else than blaming you, I wrote a reply yesterday to the eragon forum that there's someone else who flashed -not even a custom rom- just the root .zip that was for the "old" p8000 and got his phone bricked the same way as you (LCD driver problem). That's why I asked for a dump/backup. It could have been useful for you too (as in this case) and for the other guy too. But nevermind, I hope that you learn from this for later things... anyways, the other guy has contacted elephone on their facebook, so I hope you'll get the rom so you can use your device again. Good luck!
I have this version too, just got it today.
If someone can explain to me how to create the scatter file and the backup, I'll do it.
I have some experience with this stuff, but MTKDroidTools tells me unknown rom structure.
Any help?
I do have the same problem (see here: http://forum.xda-developers.com/elephone-p8000/general/rom-p8000-t3431571 ). I just wanted to root the phone because I liked to change the wifi modem file but i didn't even realize that I got another version of the phone at this point, so I bricked it.
I also contacted the support via facebook, but the support guy had to ask the engineers for help.
But maybe someone can help Emileh taking a dump of his phone, that would be really great!
@ardrift
you are sooo right but I have'n expected that two phones of the same type contain conplete different hardware respectively the firmware is not supporting both hardware versions. Even the manufacturer does not metion to check the hardware version before flashing...
@Emileh @flo1k
I do have a second 'untouched' P8000(B) too - and I'm starving to copy the firmware from this working phone to the faulty phone if someone could explain how...
problem solved
flo1k managed to get a stock ROM for this hardware version - the softwarepackage is named K06TE-A.A.vR14.E1.160707 and should be available at the elephone forum soon....
Further information you can get here http://forum.xda-developers.com/elephone-p8000/general/2016-version-fingerprint-scanner-t3436270