First of all Hi to everyone. I have a problem with the latest build (the one from 13.06 - i believe it is the latest). This is the first time I install Android on TP2. I also installed Android on Touch Diamond but there I had no problems.
Now I will line up my problems:
1. I get the splash screen for 30 or more minutes - it is resolved now after deleting data.img and restarting.
2. I do not have network signal (I am on Orange), wi-fi or sound. If you can tell me what is wrong it would be of great help for me.
Thanks a lot guys.
Sorry if I posted wrong here, I am kind of new to this forum.
Me again. So I read on the forum about the second problem. The sound (in speaker) still does not work in this build. Regarding the network signal i had an extra line in my startup.txt (force cdma). After I removed it everything went fine. About the wi-fi problem it seem to be a WEP encryption issue.
Sorry again for starting a new post, maybe someone will find it usefull after all.
never mind
Related
Hi community - I updated to VP3G and now either the red button nor the end button finishes the call - this is bad - any idea what I can do ?
peter7 said:
Hi community - I updated to VP3G and now either the red button nor the end button finishes the call - this is bad - any idea what I can do ?
Click to expand...
Click to collapse
Tough to answer with any certainty without knowing more details. Could be your radio - I had that same problem with some radios. Since going with this ROM I have not had the problem. Also what apps do you have loaded?
Mark.
peter, it is something you have done as no one else has had this issue.
What radio? What software have you installed? Using a different Dialer? Hard reset?
We need more information besides "it doesn't work".
And as long as we're giving advice, this forum prefers possible concerns or issues be posted in the already available thread.
For example; if you're having problems with Black Majik, no need to start another thread, just post in the already available thread.
Thanks
Berd
Yes first I thought it is the radio so I switched to Radio 1.43 but the problem is still there. Now I found out it is more the case when I`m connected via GPRS that the button as well as the "end" software button dòn`t work ...
Applications which I use - no extra phon software, but magic button or the as follows: sk software, skype, sprite backup, webis etc.
It's your hardware controller card, gone bad. After some time all of your front button will stop responding. I had the same problem, sent to Dopod service center and got it fixed.
Its not any of ROM issues what so ever. Its a common defect of some earlier batch, as told by the techies at the Service Center.
berdinkerdickle said:
And as long as we're giving advice, this forum prefers possible concerns or issues be posted in the already available thread.
For example; if you're having problems with Black Majik, no need to start another thread, just post in the already available thread.
Click to expand...
Click to collapse
Heh, I made the same assertion once and was told on no uncertain terms that I was wrong.
It seems that it is not the hardware because it is wonderful working when I`m not online with GPRS or 3G !
So what elese can I do ? Should I try another ROM or can I just install an updated file for the GPRS issue ?
PLs help
please remember this is a Dev forum and I believe you answered your own question try flashing another ROM and see if that fixes it. I have no idea about updated GPRS software - you mean a radio ROM? just flash another OS and see if that works its not a problem with 3Gvp's rom but maybe you had a bad flash
vp3G said:
Heh, I made the same assertion once and was told on no uncertain terms that I was wrong.
Click to expand...
Click to collapse
LOCK:Enabled
EXEC:\xda-developers\HiJack.exe
Forum Rules:
http://forum.xda-developers.com/announcement.php?f=355
And Particularly this comment:
pof said:
post a comment to the relevant thread instead of starting a new one.
Click to expand...
Click to collapse
END: HiJack.exe
LOCK: Disabled
RST: Reset
@berdinkerdickle: Yep, at the time I cited that stuff too... and was told by a certain mod that I was still wrong!
peter7 said:
It seems that it is not the hardware because it is wonderful working when I`m not online with GPRS or 3G !
So what elese can I do ? Should I try another ROM or can I just install an updated file for the GPRS issue ?
Click to expand...
Click to collapse
Hmmm... that's an interesting twist on the problem I've never heard before. I would suggest a) hard reset b) reflash my ROM c) flash another ROM. I'd probably also go with a Cingular version of the radio for now ... 1.40 or 1.48.
VP - shouldn`t I start with a new radio rom version before I reinstall your ROM ??? At the moment I`m using the 1.43 version
Up to you, but I thought you said you'd already changed radios. I'd probably go for the hard reset and see if it works before installing anything else.
Hi VP, your advice worked - I changed to ROM 1.48 and now when I dial the online connection is stopped and reactivated after the phon call.
THANK you so much !!!!!!!!!!!!!!!
Best regards
from Germany
Active Sync Error
VP - it´s again me - pls can you look at my problem: My Tytn is telling me -in the meantime several times a day -that I have to resynchronize and after I got the warning to resynchronize there comes the next warning that there is no IP number !
Hi chaps - forgive my inexperience ! I have gone to WM6 and seem to be having wifi 'dropping connection' issues - it seems to happen when the unit sleeps - when I reawaken its connection is lost and the wifi icon in the settings / connections has GONE and I have to restart. I'm also running 'Easy wifi Radar' and it comes up with an error: Exception code oxeo6d7363 address oxo3f91e7c (I don't know if this has anything to do with the problem) Any advice would be much appreciated. Many thanks Roger
Solution..
Reinstall the ROM or modifed ROM... I think that a solution..
Thanks Arvani - you guys will have to forgive my ignorance but, after doing a search, why are there all these variations of ROM and debates and polls about which is the most stable etc ? Why should the WM6 I downloaded from the HTC site yesterday not be the best for an HTC device and why are there problems with it - again please forgive my naivety. Best Roger
Hey guys,
I've just flashed the new radio listed here
http://forum.xda-developers.com/showthread.php?t=996630
Radio: 12.62.60.27U_26.13.04.19_M
RIL: HTC-RIL 2.2.0.0179HM
So I flashed the ROM with the RIL mentioned in the first post... unfortunately I'm unable to post it on the same thread as this is my first post.
Ever since flashing that Radio & RIL, my "E" has turned to a "G" so I know I have internet connectivity, just that its GPRS and not EDGE. I'm on Virtuous Unity 2.35.
Any inputs would be appreciated.
Thanks.
any.... clue guys?
Same thing happened to me .... if you go back to the old radio it would work fine... there is some bug in the new radio , it sometimes changes to E but if u surf the net then changes back to G
Strange!
Glad to know I'm not the only one, though.
Thanks for replying!!
no edge connectivity
hey guys. i faced a similar problem today after rooting my dhd and installing the primo-s v3.5 rom. after the installation was completed, it showed i had EDGE connectivity, but after a system restart it turned to GPRS. i haven't been able to confirm whether there is a drop in connection speed, but it is bothering me a lot. i even restored the original APN settings but to no avail. any suggestions to rectify it?
thanks in advance
Hi,
since I'm not allowed to post into the developer section I open this thread here and hope for some answers.
I flashed seb's runnymede AIO 6.0.4.1 Special Edition according to the Guide, 4ext recovery, 1gb ext 4 partition on my 16 GB Class 10 sd card, have hboot cm7/r2, chose AD2SDX, let it settle for some time, rebootet and tried all that again and again about 5 times, also with generic app2SD.
Every time I have the same problem:
When I'm not connected to WLAN the only app that can acces the internet connection is the browser, all other apps and sync try and try but won't get any data. Browser works fine (and faster as on my previous LeeDroid 3.0.8.2 I think) and with a WLAN connection all the apps work.
I searched on XDA, googled it and went through some of the 1600! pages of the original thread but came up with nothing similar.
I really like this ROM, it has everything I desire, sense 3.5, runs very smoothly and other than the known bugs and the described problem it has worked perfectly so far. I really would like to use it for a longer time (until a stable ICS rom + sense comes up ) but with this problem it is not usable.
Strange that you have browser access but nothing else.
In settings>wireless & network>mobile networks> is "enable always-on mobile data" checked?
Same location, is Network Mode set to GSM/WCDMA auto?
Highly unlikely to be the cause but have you tried different APN settings for your network?
With AIO and my o2 network I have to change the settings from those pre-installed.
Just wow,
thanks for the fast response,
Thats a yes to the first two questions, but your suggestion regarding the APN worked!
Thanks a lot!
No problem. Thanks for including all the info needed to point in the right direction.
There are altogether too many "HELP! its not working!... its not working!..... do I need a new phone?!!..... questions.
Get your 10 posts out of the way and join the main AIO thread. We are always looking for tips and tweaks to get things running faster/smoother/better. Seb (the dev) has been AWOL for a week or so since he bought a new Sensation but we are still there trying out new things in his absence.
PP
Browser issue...
Prof Peach said:
No problem. Thanks for including all the info needed to point in the right direction.
There are altogether too many "HELP! its not working!... its not working!..... do I need a new phone?!!..... questions.
Get your 10 posts out of the way and join the main AIO thread. We are always looking for tips and tweaks to get things running faster/smoother/better. Seb (the dev) has been AWOL for a week or so since he bought a new Sensation but we are still there trying out new things in his absence.
PP
Click to expand...
Click to collapse
Hi ...
I have a kind of similar issue...
After installing (v6)....... default browser stopped working....but Opera works f9
any suggestions plz...
khanbari said:
Hi ...
I have a kind of similar issue...
After installing (v6)....... default browser stopped working....but Opera works f9
any suggestions plz...
Click to expand...
Click to collapse
Rsk v6 or aio? I would uninstall the browser apk using root explorer then install browser apk (take it from the Rom zip) to sd-ext/app_s then reboot
sent from my Runnymede AIO using XDA app
Hello everybody! I'm new to this forum. I hope I've posted in the right place.
I've been using CyanogenMod 7.2 (2.3.7) (Unofficial - CyanogenMod-7-20120717-UNOFFICIAL-marvel) for a couple of days now and I must say that it's pretty darn stable, only receiving a few minor bugs and forced crashes (probably caused by me because I went to town with the settings). But after using the mod, I've come across a really annoying bug that seems to have been around since Android 2.3.2 came into existence.
It's to do with the keyboard. Intermittently when typing, the keyboard would often repeat the first letter (or two) or the last letter, even between words. For example, if you were to type the word good at average typing speed, often it would turn out as "ggame" or "gagame".
What I have tried:
-Reflashing the ROM
-Trying an alternate Android Gingerbread keyboard
-Restarting the device
-Factory reset from CyanogenMod
All of the above does not fix my problem. I've searched everywhere to find a fix for this problem or a possible workaround (without switching to another keyboard) and have had no success. I'm wondering if people here can help me out. Is this a problem with all CyanogenMod 7 devices or did something go wrong with the port by alquez? I've used CyanogenMod 9 on my device and that problem doesn't occur with its keyboard which leads me to believe that this is a CyanogenMod 7 problem.
For any help offered, I'll appreciate it greatly. I will be able to provide any information requied. Thanks a lot!
-CyanogenFireS
Information:
Model number: Wildfire S A510e (Marvel)
Android version: 2.3.7
Baseband version: 47.23e.35.3038H_7.57.39.10M
Kernel version: 2.6.35.13eoghan-cryptomalk-alquez-r1-g-bb9087-dirty
Mod version: CyanogenMod-7-20120717-UNOFFICIAL-marvel
Never mind! The problem can be resolved by turning off "touch to correct" within the keyboard settings. I'll leave this post up for those who need to see it that experience the same issue.