Related
I've been looking for the past few hours and now I'm starting to get nervous --- i've read tons of threads with people having something like my problem and I've done everything suggested and still no luck, starting to freak out a bit haha. Hooked my phone up this morning, everything was as normal. Plug it in, USB option comes up, worked perfectly. The only thing I did with my phone was go on a long car ride and charged it using an adapter to a house charger. Im assuming that somehow that screwed it up since it was being converted. This sounds strange to me but its my only idea. I can't connect, the second I plug in my phone it starts to charge (and for some reason the light doesn't come on when it usually does).
Things I've tried =
-Reset phone/computer
-Reflashed latest Calks
-Tried 4 different cables (along with all computers USB ports)
-Reinstalled Samsung drivers
-Reflashed stock
-System restore of computer
--------
Other than completely wiping my phone of everything I don't know what else to try. Any suggestions/help would be greatly appreciated! Thanks for your time.
Try booting on recovery and enable USB mount, if you still don't have access to the phone then very likely your USB port is damaged. This will discard any issues with the ROM
Another thing you could try is to get the phone to another computer, the computer should recognize it even without drivers if you enable USB storage mode or at the very least make the unknown device show up on the device manager. If it shows up then you know for sure your computer is the problem, if not, well then it is your phone.
fenixjn said:
Try booting on recovery and enable USB mount, if you still don't have access to the phone then very likely your USB port is damaged. This will discard any issues with the ROM
Another thing you could try is to get the phone to another computer, the computer should recognize it even without drivers if you enable USB storage mode or at the very least make the unknown device show up on the device manager. If it shows up then you know for sure your computer is the problem, if not, well then it is your phone.
Click to expand...
Click to collapse
I even went so far as to format my netbook and start fresh, still didn't work --- just got it set back up...
My girlfriend just got home with her computer and it's not recognizing it at all. When I go into settings>Wireless> USB Utilities, it doesn't even recognize that my cable is connected (even though its charging)
I didn't know there was anything like Force USB Mount in recovery so I'm going to do that right after I type this post
This is really frustrating :O haha so I guess if your suggestion doesn't work, whats the easiest way to un-root return to stock so I can stop by the Sprint store tomorrow? I talked to a rep that roots his phones and he said as long as it says Gingerbread 2.3.6 they'll take it back (I guess they don't look at the custom counter)
Any other suggestions? (Thanks fen)
Thanks for the idea but the force mount through CWM didn't work ... Gave me a little hope by popping up on my pc for two seconds but then disappeared. Yeah so looks like my next option is to return to stock and get me a new one?
AVAH0LIC said:
Thanks for the idea but the force mount through CWM didn't work ... Gave me a little hope by popping up on my pc for two seconds but then disappeared. Yeah so looks like my next option is to return to stock and get me a new one?
Click to expand...
Click to collapse
Odd... so the phone popped on windows and then disconnected immediately? That would indicate that physically the port is fine but logically something is going on... (unless you moved the cable).
Well if that is the case then you could either try to diagnose the issue yourself OR try to get the phone replaced somehow.
Another idea... have your tried download mode?
Im on the same boat delete the drivers from your computer the actual usb drivers not the samsung ones that worked for me the update them again. I have a dv7 hp. It works at times but somethimes it says error connect to a high speed usb
Sent from my SPH-D710 using Tapatalk
I had this same issue (if I'm reading and understanding you correctly) for the last week and was at my wits end. No matter what I did or changed, I could not get my PC to recognize my phone all of a sudden. The USB connected notification just quit appearing. I installed and uninstalled drivers, installed and uninstalled different Keis versions, tried different cables, different computers..... Finally just as I was about to wipe and Odin the phone, I remembered I had changed the AP/CP setting in ##8878# when I did the PRL change and just maybe I forgot to change it back.......sure enough, that was it. I switched it back, connected phone to PC and bam!...all fixed.
Sent from my SGSIIE4GTuvwxyz....should I touch my nose or walk a straight line now?
n01un0 said:
I had this same issue (if I'm reading and understanding you correctly) for the last week and was at my wits end. No matter what I did or changed, I could not get my PC to recognize my phone all of a sudden. The USB connected notification just quit appearing. I installed and uninstalled drivers, installed and uninstalled different Keis versions, tried different cables, different computers..... Finally just as I was about to wipe and Odin the phone, I remembered I had changed the AP/CP setting in ##8878# when I did the PRL change and just maybe I forgot to change it back.......sure enough, that was it. I switched it back, connected phone to PC and bam!...all fixed.
Sent from my SGSIIE4GTuvwxyz....should I touch my nose or walk a straight line now?
Click to expand...
Click to collapse
Ive never done anything like that just rom flashes --- but its worth a shot ---- only problem is ##8878# doesn't do anything on mine??? You sure thats the right dial code?
fenixjn said:
Odd... so the phone popped on windows and then disconnected immediately? That would indicate that physically the port is fine but logically something is going on... (unless you moved the cable).
Well if that is the case then you could either try to diagnose the issue yourself OR try to get the phone replaced somehow.
Another idea... have your tried download mode?
Click to expand...
Click to collapse
Sorry I was in a hurry when I typed that --- let me clarify.
Honestly I did so much tinkering last night that I don't remember exactly how i got it to do it. But after playing with the mounts in CWM, I eventually started up my phone and the USB logo came up in the Notif bar --- (MTP Inititaed - or whatever that is) but after clicking the icon nothing happened and eventually just went away
n01un0 said:
I had this same issue (if I'm reading and understanding you correctly) for the last week and was at my wits end. No matter what I did or changed, I could not get my PC to recognize my phone all of a sudden. The USB connected notification just quit appearing. I installed and uninstalled drivers, installed and uninstalled different Keis versions, tried different cables, different computers..... Finally just as I was about to wipe and Odin the phone, I remembered I had changed the AP/CP setting in ##8878# when I did the PRL change and just maybe I forgot to change it back.......sure enough, that was it. I switched it back, connected phone to PC and bam!...all fixed.
Sent from my SGSIIE4GTuvwxyz....should I touch my nose or walk a straight line now?
Click to expand...
Click to collapse
Just by playing around with those numbers you gave me I found it to be ##8778# bringing up the USB -AP/CP/ALL menu --- which one is it supposed to be set as?
EDIT*** It was on AP... tried the other two options, resetting phone in between both of them and still no luck --- have an appt to go to the sprint store tomorrow ---
Because I can't get the phone to connect... I don't suppose there is a way to flash unroot is there --- I've already flashed modem kernal and stock rom --- went into ES and deleted Superuser... the only way you can tell that my phone has been messed with is that CWM still pops up when you do the Volume+poweron... any suggestions?
Thanks again for the suggestions everyone I really appreciate them
AVAH0LIC said:
Just by playing around with those numbers you gave me I found it to be ##8778# bringing up the USB -AP/CP/ALL menu --- which one is it supposed to be set as?
EDIT*** It was on AP... tried the other two options, resetting phone in between both of them and still no luck --- have an appt to go to the sprint store tomorrow ---
Because I can't get the phone to connect... I don't suppose there is a way to flash unroot is there --- I've already flashed modem kernal and stock rom --- went into ES and deleted Superuser... the only way you can tell that my phone has been messed with is that CWM still pops up when you do the Volume+poweron... any suggestions?
Thanks again for the suggestions everyone I really appreciate them
Click to expand...
Click to collapse
I am having the same issue. However, my phone is stock. Do you know what was the culprit?
Get insurance on it wait a few weeks, say you lost it and pay the $100 for the replacement. Keep the lost one for parts. Or sell it on ebay for parts. This is if you can't fully get back to stock.
Sent from my SPH-D710 using xda premium
I never did get a confirmation kn exactly what the problem was. As stated above i just deleted super user and flashed a stock everything and just prayed they wouldn't check for cwm which they didn't.
Im assuming my charging port burnt out. I used multiple different cables, including LG HTC stock Samsung and some Verizon one. But i think what finally did it was using the Verizon one in the car with a really old adapter. I don't understand why this would cause a problem but i really believe it did. That Verizon cable even acts weird with this new phone like it says charging but led light randomly turns on and off.
Im confused as to what happens to that old phone if you ever lose it. I lost a phone along time ago when I was drunk, but instead of claiming insurance i was eligible for upgrade. What possibly could have ended up happening with that old phone? Somebody found a paper weight? Or was somebody able to flash it and use it?
I guess the condensed version of my question is what happens to a found phone after device has been reported lost?
Sent from my oh-so-sexy Samsung!
Download a ek02 full tar put it on sd card and use mobile Odin to flash...you can use wifi explorer to copy it to sd card.....you will end up full stock no root
Sent from my SPH-D710 using xda premium
Epix4G said:
Download a ek02 full tar put it on sd card and use mobile Odin to flash...you can use wifi explorer to copy it to sd card.....you will end up full stock no root
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Does mobile odin work well?
Sent from my oh-so-sexy Samsung!
Hey guys, I bought a Galaxy Nexus almost a week back but as its not launched officially in India its not under warranty and so I can't get it replaced.
Out of the box it came with ICS. Everything was going fine including Bluetooth file transfers. But the phone went to a boot loop (stuck at boot animation) when I tried to activate Bluetooth. Mind you that Bluetooth had been working fine, I got this issue all of a sudden.
I went into recovery mode and recovered my phone but all data was lost.
Later I updated to official stock ICS. Again the Bluetooth worked fine for few days and later suddenly went into a boot loop. I recovered my phone but this time too lost all my data.
Now I'm obviously very scared to use Bluetooth. Some people say that its a faulty firmware and I should flash another firmware.
What shall I do? Could this really be a firmware issue? And if yes then which firmware shall I flash and how to flash?
Currently I'm on stock JB on my GSM GNex which is unrooted and has a locked boot loader.
AbhishekS said:
Hey guys, I bought a Galaxy Nexus almost a week back but as its not launched officially in India its not under warranty and so I can't get it replaced.
Out of the box it came with ICS. Everything was going fine including Bluetooth file transfers. But the phone went to a boot loop (stuck at boot animation) when I tried to activate Bluetooth. Mind you that Bluetooth had been working fine, I got this issue all of a sudden.
I went into recovery mode and recovered my phone but all data was lost.
Later I updated to official stock ICS. Again the Bluetooth worked fine for few days and later suddenly went into a boot loop. I recovered my phone but this time too lost all my data.
Now I'm obviously very scared to use Bluetooth. Some people say that its a faulty firmware and I should flash another firmware.
What shall I do? Could this really be a firmware issue? And if yes then which firmware shall I flash and how to flash?
Currently I'm on stock JB on my GSM GNex which is unrooted and has a locked boot loader.
Click to expand...
Click to collapse
Never heard of this. With all data lost, do you mean the /sdcard partition as well?
I'm sorry I didn't get you. GNex doesn't have a SD card slot, right?
AbhishekS said:
I'm sorry I didn't get you. GNex doesn't have a SD card slot, right?
Click to expand...
Click to collapse
Correct. That's why I said partition.
Sent from my Galaxy Nexus using Tapatalk 2
Well this is my first Android so I don't know much about partitions.
Well when I wipe my phone / factory reset, ALL my data gets removed including images, music, videos, contacts, messages, calendar events, 3rd party apps, etc.
Someone please help.
Bluetooth Boot Loop
Im having the same problem.. Please let me know if you found a solution.. I'll give you update if I find one myself..
The list of Android units that I have encountered this was with
2 units of Asus TF101G and 1 unit TF300T
My TF101G was fixed when I installed a Custom ROM (Revolution HD)
I'm open to rooting my phone but not to unlock the bootloader to keep the warranty..
Hard Reset fixed it but after a few days when I activate the Bluetooth it will start with the Boot Loop.. It's very frustrating to install apps and everything.
Perhaps is it related with the files I installed?
Afaik, bluetooth radio is controlled by the baseband. What version are you guys using?
Im currently using TF300T
Asus Official WW Jellybean ROM
I think It's not related with the JellyBean coz I expereienced it with ICS before when Im using TF101G
The baseband of my GNex is I9250XXLF1. I am on official JB (4.1.1) on yakjuxfw.
Please help me, this is really annoying and I'm very scared to activate Bluetooth now.
AbhishekS said:
The baseband of my GNex is I9250XXLF1. I am on official JB (4.1.1) on yakjuxfw.
Please help me, this is really annoying and I'm very scared to activate Bluetooth now.
Click to expand...
Click to collapse
You are on the latest baseband and Android version. And since you are completely stock and the problem also manifested itself on ICS, I'm going to say you are probably having a hardware issue there.
That's really sad to hear. And as the GNex is not available officially in India, I can't get it replaced either.
BTW you said 'probably', what can be the other possibility?
Well I too have something to elaborate. Both the times (on ICS and JB), the problem occurred while activating Bluetooth from Notification Toggle (downloaded from Play Store). It's not that whenever I used Notification Toggle did the problem occur. Several times Bluetooth successfully got activated using Notification Toggle.
So as much as I feel that it could be a problem of Notification Toggle, I feel that the opposite is possible too.
Another thing is that I had downloaded a paid app for free from a torrent website. Tapatalk to be precise. Many of my friends suggested that and I wanted to try it out and so downloaded it from torrents. On both bootloop occasions, that 'pirated' copy of Tapatalk was present in my phone.
Now I have purchased Tapatalk, uninstalled that pirated copy, uninstalled Notification Toggle and now I just tried three Bluetooth transfers with my system (2 send and 1 receive) and they took place perfectly. Is it possible that the pirated copy of Tapatalk was causing the issue?
I know it's not ethical and even against the XDA rules to discuss about such pirated copies but I didn't want to hide anything when asking for a solution to my issue.
AbhishekS said:
That's really sad to hear. And as the GNex is not available officially in India, I can't get it replaced either.
BTW you said 'probably', what can be the other possibility?
Well I too have something to elaborate. Both the times (on ICS and JB), the problem occurred while activating Bluetooth from Notification Toggle (downloaded from Play Store). It's not that whenever I used Notification Toggle did the problem occur. Several times Bluetooth successfully got activated using Notification Toggle.
So as much as I feel that it could be a problem of Notification Toggle, I feel that the opposite is possible too.
Another thing is that I had downloaded a paid app for free from a torrent website. Tapatalk to be precise. Many of my friends suggested that and I wanted to try it out and so downloaded it from torrents. On both bootloop occasions, that 'pirated' copy of Tapatalk was present in my phone.
Now I have purchased Tapatalk, uninstalled that pirated copy, uninstalled Notification Toggle and now I just tried three Bluetooth transfers with my system (2 send and 1 receive) and they took place perfectly. Is it possible that the pirated copy of Tapatalk was causing the issue?
I know it's not ethical and even against the XDA rules to discuss about such pirated copies but I didn't want to hide anything when asking for a solution to my issue.
Click to expand...
Click to collapse
If the problem happens again, I think you have to return it to where you purchased it from as it may be a hardware defect. Let's just hope it doesn't happen again. And I know you mentioned India does not officially sell the Galaxy Nexus. All the best!
Sent from my Galaxy Nexus using Tapatalk 2
and yes, it happened to me too. Its bootloop, then i took the simcard out, then power on again, but takes a long time, only X logo for more than 10 minutes. Then its going to menu. Then, well, i check the settting, turn on the bluetooth again, bump ! it happened again.
FYI, device not rooted, bought three days ago, and its LOCKED.
kanded said:
and yes, it happened to me too. Its bootloop, then i took the simcard out, then power on again, but takes a long time, only X logo for more than 10 minutes. Then its going to menu. Then, well, i check the settting, turn on the bluetooth again, bump ! it happened again.
FYI, device not rooted, bought three days ago, and its LOCKED.
Click to expand...
Click to collapse
Is the problem solved for you? If yes, then how?
@Kanded: Can you please tell whether it's solved or not?
The same problem with me!!
Not just in the GNex, it also happens with me in my HTC One V.. I can't find a fix anywhere on the internet? There's no one who can tell why this happens? I change ROMs but still it happens in every ROM! :crying:
I use Bluetooth for a few days... and BOOM! on one day it suddenly goes into boot loop....
That is exactly the issue I face, exactly the same.
Sent from my Galaxy Nexus using Tapatalk 2
Hello,
I received my Samsung AllShare Cast Wireless Hub last night and have been trying to spend all day getting it and my Sprint SG S III to connect, and I have not succeeded.
I have tried using the custom rom I use (Team Sonic JB) and also going back to full stock rom and stock recovery and also using the triangle remove to reset everything and I have not succeeded.
My phone each and every time see's the Samsung Wireless Hub (Dongle) and every time I try to connect to it, the phone message says's The AllShare Cast failed to connect.
Samsung support for this is not available until Monday so I wanted to ask here in case anyone might have some advice for me to try and fix this.
I also noticed that when I try to register this product, 1: The number it asks me for to register is not on this device (HEX/IMEI) like there is on the phone. 2: The model # on the device itself, when I type it into Samsung website, pulls up nothing. When I search for the device by name, I find it, but it has a totally different model #.
So I am looking for any and all help out there. I ordered this because of the Samsung %50 discount when I registered my SG S III phone but I am not happy atm since it is not working for me.
Thank you,
Whiteice
are you holding down the reset button until the light turns blue? If not it will fail every time. I run a stock rom and mine works.
As far as registration I have been trying to figure that out myself.
Yes I hold it down until it turns blue. Then once I let it go it starts to flash red.
Sent from my SPH-L710 using Tapatalk 2
Tidbits said:
are you holding down the reset button until the light turns blue? If not it will fail every time. I run a stock rom and mine works.
As far as registration I have been trying to figure that out myself.
Click to expand...
Click to collapse
So i just got off the phone with Samsung. RMA my unit.
The girl said they need to look into it because accessories are not allowed or eligible to register. Doesnt make sense to me.
I know the 3 support reps are doing there best but i really felt like they just disnt have a clue.
Whiteice
Sent from my SPH-L710 using Tapatalk 2
Mine works fine on the 3 and note 2. It may be defective. It should work first try.
Sent from my SGH-T889 using Tapatalk 2
I had to use triangle away to get mine to work. I was stuck at the black connecting screen.
after using the app, it has worked ever since with no problem.
abeggs said:
I had to use triangle away to get mine to work. I was stuck at the black connecting screen.
after using the app, it has worked ever since with no problem.
Click to expand...
Click to collapse
What rom are you using. I have tried several now without any luck and yes I used the triangle away app to reset everything.
Sent from my SPH-L710 using xda app-developers app
abeggs said:
I had to use triangle away to get mine to work. I was stuck at the black connecting screen.
after using the app, it has worked ever since with no problem.
Click to expand...
Click to collapse
I am using a custom roms on T-mobile's version Note 2 & S3 and both work as they should... You must have a bad unit for sure.... Once you get a replacement please report back? And I have never had to use Triangle Away to get mine to work and I have custom recovery and the works!
shojus said:
I am using a custom roms on T-mobile's version Note 2 & S3 and both work as they should... You must have a bad unit for sure.... Once you get a replacement please report back? And I have never had to use Triangle Away to get mine to work and I have custom recovery and the works!
Click to expand...
Click to collapse
Will do.
My RMA is due to be received by Samsung tomorrow. I hope to have my replacement by weeks end.
WhiteiceDMSTech said:
Will do.
My RMA is due to be received by Samsung tomorrow. I hope to have my replacement by weeks end.
Click to expand...
Click to collapse
I received my RMA unit and I am having the same issue. It fails to connect.
I am running Team Sonic SG3 rom and have Triangle Away running.
Not sure what else to do at this point.
Whiteice
Make sure when you are trying to connect you have the hub light solid blue. Use the reset button until it is solid blue.
Sent from my SGH-T889 using Tapatalk 2
Tidbits said:
Make sure when you are trying to connect you have the hub light solid blue. Use the reset button until it is solid blue.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the suggestion.
Tried this and still fails to connect.
Just wondering, is there any particular baseband/modem I should be running for this to sync?
I am on LJ7 with the TW Roms.
Thank you,
Whiteice
There's a firmware update on the phone today. You may want to check it out.
Sent from my SGH-T889 using Tapatalk 2
Running Team Sonic Free GS3 and it does not work for me either.
Got AllShare Hub to Connect to My App Radio with Gallaxy S3
WhiteiceDMSTech said:
I received my RMA unit and I am having the same issue. It fails to connect.
I am running Team Sonic SG3 rom and have Triangle Away running.
Not sure what else to do at this point.
Whiteice
Click to expand...
Click to collapse
I finally got mine to work.
Connected from my 3S SCH-I535 (Verison)
Used [Root] Triangle to reset the counter number to 0
Connected to the AllShare Hub
Received a reject connection msg
Unable to reconnect. Msg said "Connection Failed"
Tried to connect by holding the reset button till it turned red, same failed msg every time.
Called Samsung - THEY DON'T HAVE A CLUE WHAT THEIR DOING.
Finally just pressed and released the reset button, which turned the blinking red light to blue.
It connected.. and worked
Next time I connected it was back to the rejected connection message.
Found that if I have the display on during connection, it worked (mostly).
I'm using this hub in my car to connect to my Pioneer AVH-X8500BHS with App Radio. I wish there was a seemly way to connenct as I have to do a lot before I go anywhere
Change radio to the App mode
Say OK to several warning screens.
Use my phone to launch AllShare app and connect to hub.
Run the ARLiberator app and connect to the radio.
After all the connection are complete, I can drive off.
I have a Sasktell Note 2 and have major problems with the WiFi
When turning it on it will flick on and off then get stuck off, when i mean flick on and of it never fully turns on the on light comes on for maybe a split second then back of and just hands with it not being on or off and not usable.
I have flashed a multitude of roms and put stock rom back on but this problem will not go away and is random, sometimes removing the battery will help and it will work for a few hours or days then crap out again.
Tried and searched even did the copy the old etc/wifi setting over the orginal did not work.
getting close to the point of stamping on it and getting a Iphone:crying:
Thanks for any help
reboot your router...
Factory reset the device and set up WiFi again..
Sounds like a dirty device...
Router reset also as mentioned above...g
Thanks for advice not sure what you mean on router not using a router, im just trying to turn on the wifi on my phone and its not that it wont connect to anything it just wont turn on.
I have done factory resest 1,0000000000000 times and just flashed another 2 roms same problem.
If you are using wifi at your house etc..
Power down the router for your internet connection and reboot it..
This could also be a hardware issue...
It sounds like you have exhausted the other repair options with fresh installs and trouble shooting....g
Thanks no its nothing to do with a router its a phone issue.
Not connecting to router or anything for that matter just turning on wifi on the phone.
Pos is ready be thrown through a wall no one seems to know the reason
Also as wifi button is not working it also means hotspot is not working
Where can I get the original note 2 rom for sasktel every one I find is bell or ata one last ditch at fixing it
stonkeye said:
Thanks no its nothing to do with a router its a phone issue.
Not connecting to router or anything for that matter just turning on wifi on the phone.
Pos is ready be thrown through a wall no one seems to know the reason
Also as wifi button is not working it also means hotspot is not working
Where can I get the original note 2 rom for sasktel every one I find is bell or ata one last ditch at fixing it
Click to expand...
Click to collapse
Sasktel rom but its root injected.
http://forum.xda-developers.com/showthread.php?t=2004650
Sent from my SGH-I317M
jon3sh said:
Sasktel rom but its root injected.
http://forum.xda-developers.com/showthread.php?t=2004650
Sent from my SGH-I317M
Click to expand...
Click to collapse
No worries...
Unroot and reset is easy enough...g
Well downloaded the rom installed it and still no joy
Maybe the phone is just #@%$#@$.
Going to try re-partition see if that makes a difference.
stonkeye said:
Well downloaded the rom installed it and still no joy
Maybe the phone is just #@%$#@$.
Going to try re-partition see if that makes a difference.
Click to expand...
Click to collapse
The device may indeed have a hardware issue...
We will know soon enough I suspect...
Good luck, and be careful....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Well tried a few more things and think i screwed it,
It now comes up with baseband unknown and the phone memory has dropped to 0 if i connect to the usb cable I can see the phone on the PC but has odd numbers when it comes to free memory and cannot create anything as says zero memory.
If i go to the phone there is no longer any signal and the memory is at 0 also.
I just re checked odin i think I clicked Nand erase all by mistake ooops
If you did erase the nand....the phone is effectively dead..
Unless you have a full backup to restore your EFS and IMEI #....then it's bye bye note2..
Oops is right....
Ya killed it....g
Edit:
Do you have a backup ??
That part about being careful was no joke....g
No back up so no phone.................
Could I not DL a nadro from online and flash it?
If that's not a option bye Note 2 I would like to say it had been a fun ride but you where a piece of crap and destroyed my trust in Android your brother SGS1 had a hand in destroying it also )
you cant download someone elses nandroid and use it..
sounds like operator error has runied another phone;
dont blame it on Android
I would agree operator ruined it im not blaming it very odd of you to read that from the sentence.
I stated my first android sgs1 no good nothing to do with anything other than the phone, inline mic and usb sound did not work GPS did not work Samsung stated no work around live with it. Note 2 over 6 months of no Wifi or hotspot makes phone useless for me as it is a required feature as country living no internet unless the phone works. Tried fixing and talking about it no joy so had already decided the phone was going in the trash, hence why im not that fussed that it bricked.
Very sorry about the phone...
It's a fine device...but is not a solve all...
No device is....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
stonkeye said:
I would agree operator ruined it im not blaming it very odd of you to read that from the sentence.
I stated my first android sgs1 no good nothing to do with anything other than the phone, inline mic and usb sound did not work GPS did not work Samsung stated no work around live with it. Note 2 over 6 months of no Wifi or hotspot makes phone useless for me as it is a required feature as country living no internet unless the phone works. Tried fixing and talking about it no joy so had already decided the phone was going in the trash, hence why im not that fussed that it bricked.
Click to expand...
Click to collapse
Try this maybe you can still revive it it was done on S3 so you will just use cf auto root from original dev section and use custom rom for Note ll
http://forum.xda-developers.com/showthread.php?t=1976695
Sent from my SGH-I317M
jon3sh said:
Try this maybe you can still revive it it was done on S3 so you will just use cf auto root from original dev section and use custom rom for Note ll
http://forum.xda-developers.com/showthread.php?t=1976695
Sent from my SGH-I317M
Click to expand...
Click to collapse
Will have a look into that tried but the file to download is not available over use on his drop box site.
Will keep on trying thanks
stonkeye said:
Will have a look into that tried but the file to download is not available over use on his drop box site.
Will keep on trying thanks
Click to expand...
Click to collapse
No i change the link its diff method.
Sent from my SGH-I317M
jon3sh said:
No i change the link its diff method.
Sent from my SGH-I317M
Click to expand...
Click to collapse
Thanks but no joy I can do everything it suggests until it comes to putting something on the Internal mem as its messed up and just shows 0 available.
worth a shot
This seems to be a well documented issue in other device forums, but I was wondering if anyone here figured out how to handle it.
I just switched from Verizon with a note 2, to tmobile with a note 3. I drive a 2012 Subaru STi that has bluetooth connectivity. With my note 2 everytime i got into my car, the phone auto connected no problem.
With the note 3, I have to use the car's menu to select the phone and manually connect... every time i get in the car. From what I can ttell this is an issue with 4.3 android, and was wondering if anyone has found a way to fix it without rooting.
Thanks,
Derek
When you paired the Note3 initially, did you grant full access in the phone? I go through this with almost every android phone I pair after installation of a new head unit. As long as you check the box for remember choice for all and hit OK/Yes, everything works. The iPhone is the only device that seems to make this a fully automated thing.
On another note, the line out audio dock works flawlessly on the note 3 as well. I use it for all my tunes.
I have re paired the device multiple times and have not noticed a box to check for remember the decision. Someone said I need to establish the profiles ...but that only works when in the car and once I disconnect it resets. I had no issues with the note 2 the only change is the note 3. I'll try again and see if I get a box to check. There are no auto connect issues with my beats by dre wireless headphones or galaxy gear watch
Sent from my SM-N900T using XDA Premium 4 mobile app
I don't seem to get any option like you have mentioned
Sent from my SM-N900T using XDA Premium 4 mobile app
If you select the device in the Bluetooth device list on the phone, and press the settings icon, are all the boxes checked?
Yeah and the Un select as soon as I leave the car. What baffles me is that my headphones have no problem connecting. While this is not a deal breaker it really is frustrating me
Sent from my SM-N900T using XDA Premium 4 mobile app
Right now sitting in my living room they are unchecked. If I go turn my car on and select my phone from my car it connects instantly and both of those profile boxes will check themselves
Sent from my SM-N900T using XDA Premium 4 mobile app
Ok I guess I am going to throw in the towel on this. I have spent several hours trying to figure out why the hell this phone wont connect and my previous one did.
I found the profile settings under the bluetooth options, but those are always unchecked when not connected, and checked when connected.
I think I am just going to give up as no one seems to know why the note 3 fails at allow auto connect to some devices and the note 2 had no such problems.
drocksmash said:
Ok I guess I am going to throw in the towel on this. I have spent several hours trying to figure out why the hell this phone wont connect and my previous one did.
I found the profile settings under the bluetooth options, but those are always unchecked when not connected, and checked when connected.
I think I am just going to give up as no one seems to know why the note 3 fails at allow auto connect to some devices and the note 2 had no such problems.
Click to expand...
Click to collapse
Out of curiosity, what OS version were you running on the note2 when it was working as it should be? I wonder if the issue lies in the TouchWizzed 4.3 that is on the note3 as opposed to the 4.1.1/2 variety the note2 started with (I know they have 4.3 now, but perhaps they didn't when you had the device...?).
dwitherell said:
Out of curiosity, what OS version were you running on the note2 when it was working as it should be? I wonder if the issue lies in the TouchWizzed 4.3 that is on the note3 as opposed to the 4.1.1/2 variety the note2 started with (I know they have 4.3 now, but perhaps they didn't when you had the device...?).
Click to expand...
Click to collapse
Good question, I had not thought of that.
I had 4.1/2 originally but also used Beanz's 4.3 touchwiz so that my note2 worked with my galaxy gear.
So even a 4.3touchwiz on the note 2 had no problems.
Is anyone able to have their note 3 auto pair with their car? if it didnt work at all I would be able to move on and accept the loss, but for some reason my headphones auto pair in a flash. Hell I would rather the headphones not work and the car does!
drocksmash said:
Good question, I had not thought of that.
I had 4.1/2 originally but also used Beanz's 4.3 touchwiz so that my note2 worked with my galaxy gear.
So even a 4.3touchwiz on the note 2 had no problems.
Is anyone able to have their note 3 auto pair with their car? if it didnt work at all I would be able to move on and accept the loss, but for some reason my headphones auto pair in a flash. Hell I would rather the headphones not work and the car does!
Click to expand...
Click to collapse
While I don't get to use it often as it only resides in the wife's car (2012 Equinox), I have had no issues w/ bluetooth pairing/use. It's interesting the variability of outcome seen in regards to things like this (and I imagine rather frustrating as well) - I am regrettably at a loss.
Fair Enough. Thanks for trying guys I have given up!
Sent from my SM-N900T using XDA Premium 4 mobile app